Vigo VG02001STMB, VG15357, VG15378, VG15362, VG15363 Specifications

FAUCET SPECIFICATIONS

Pull-Down Spray Kitchen Faucet

Model VG02001

MODEL VG02001

FEATURES

PACKING LIST

DIMENSIONS

MODEL #	HOLE
	DIAMETER
VG02001	1 3/8"

18 1/2" *

NOTE: All faucets are compliant to CEC 2016 regulations. If you
have inquiries about your water flow, please email
[e-mail].	* = +/- 1"

FAUCET	SPRAYER
HEIGHT	REACH
18 1/2"	9 1/2"

9 1/2"

1 3/8"

					9 1/2"	EXPANDABLE
						UP TO 30"
		18 1/2"
		FUNCTION
		BUTTON
		10 3/8"			2"
5 5/8"	1/2"				6 1/4"
	4
	2 1/4"	1 3/4"
			2 1/4"		SIDE VIEW
		SPRAY HOSE
		FRONT VIEW			TOP VIEW
			VG02001
		THE MEASUREMENTS IN INCHES ARE ROUNDED TO THE NEAREST 3/8"
						2

FLOW RATE REGULATIONS

This product meets the CEC requirements. It is up to the discretion of the client to modify the product with the provided restrictor. Doing so will remove the ability for the product to meet certain low flow standards. Please talk to your local or statewide plumbing enforcement agency prior to modifying. Vigo is not responsible for any alterations and the affects that may come with altering the product post sale and highly advises that the client only install the product that meets the needs of their local plumbing code.

Flow rate with restrictor - 1.8 gpm

Flow rate without restrictor - 2.2 gpm

Restrictor

You will find the 1.8 gpm restrictor here. Simply remove the 1.8 gpm restrictor and install the faucet as usual.

Faucet

1.8gpm restrictor

3

PACKAGE CONTENTS		ASSEMBLY
RUBBER RING	COUNTERWEIGHT	1. SHUT OFF WATER SUPPLY. REMOVE THE OLD FAUCET
		AND FLEXIBLE HOSES. CLEAN SINK SURFACE WITH A NON
		ABRASIVE CLEANER IN PREPARATION FOR THE NEW FAUCET.
			1
METAL RING	PLASTIC HOLDER
	NUT
		2. THREAD FEMALE END OF METAL BRAIDED HOSE TO THE	2
		FAUCET (2).

HOLLOW PIN	!	ENSURE THAT YOU USE PIPE TAPE
COPPER PIN		AND DO NOT OVER TIGHTEN THE
	SPRAYER	SUPPLY LINE NUTS AS THIS COULD
		CAUSE PRODUCT FAILURE LEADING
		TO WATER DAMAGE.

	FAUCET	TWO METAL	ALLEN KEY (REMOVES HANDLE
	ASSEMBLY	BRAIDED HOSES
			TO ACCESS CARTRIDGE)

REQUIRED TOOLS
Adjustable wrench	3. POSITION THE FAUCET IN THE COUNTERTOP HOLE, FROM
Allen key - supplied (to remove cartridge if needed)	BENEATH THE COUNTERTOP HOLE ASSEMBLE THE PLASTIC
Plumber's putty - optional	HOLDER, RUBBER RING, AND METAL RING IN THE ORDER			3
	DEPICTED IN THE DIAGRAM. THEN THREAD METAL NUT ONTO
Pipe tape	HOLLOW PIN. TIGHTEN THE METAL NUT UNTIL FAUCET IS
Flat screwdrivers	SECURE.
SAFETY TIPS
If you use soldering for the installation of the faucet, the seats, cartridges and
washers will have to be removed before using flame. Damage caused by	!	ENSURE THAT PARTS ARE
improper soldering will void the warranty.
		ASSEMBLED IN THE ORDER AS
Protect your eyes with safety glasses when cutting or soldering water supply		DEPICTED IN DIAGRAM TO PREVENT
lines.		DAMAGE TO FAUCET AND SUPPLY
		LINES.
IMPORTANT POINTS			STABILIZES FAUCET
Prior to beginning installation, turn off the cold and hot water lines and open the			UNDER COUNTERTOP
hot and cold knobs on the old faucet to release pressure.
When installing your new faucet, turn the connector nuts finger-tight, then use			NUT
one wrench to anchor the fitting and a second wrench to tighten the nut.
Connections that are too tight will reduce the integrity of the system and	4. SCREW SPRAY HOSE TO THE COPPER PIN (THE LONGEST
potentially cause product failure which could lead to water damage.	PIN). MAKE SURE TO HAVE A TIGHT SEAL USING ADJUSTABLE
Wrap all threaded connections with pipe tape available at your local hardware or	WRENCH. ATTACH SUPPLIED COUNTERWEIGHT TO THE HOSE.
plumbing supply store. Always wrap in a clockwise direction.	!	DO NOT OVER TIGHTEN CONNECT
Not all necessary supplies to install your faucet are included, however, they are
		POINT AS THIS COULD CAUSE
available wherever plumbing supplies are sold.		PRODUCT FAILURE LEADING TO
Prior to installing the faucet please FLUSH THE HOT AND COLD WATER		WATER DAMAGE
SUPPLY LINES that are or will be connected to the new faucet to remove scale,	5. (IF NOT DONE ALREADY) ATTACH SPRAYER TO FEMALE			4
solder or their impurities which could damage the faucet and potentially void the	CONNECTION OF SPRAYER HOSE BY HAND AND TIGHTEN
warranty.	UNTIL SECURE. MAKE SURE THE BLACK WASHER WITH
	SCREEN IS SEATED AND INSTALLED PROPERLY.
	! USE WASHER WITH SCREEN AT CONNECTION POINT BETWEEN SPRAYER
	AND SPRAYER HOSE. THIS WILL STOP DEBRIS FROM TRAVELING INTO THE
MAINTENANCE	SPRAYER HEAD AND EFFECTING ITS FUNCTIONALITY. PLEASE NOTE THAT
	THE SCREEN WASHER WILL NEED TO BE REMOVED AND CLEANED
Your new faucet is designed for years of trouble-free performance.	APPROXIMATELY ONCE EVERY 3 MONTHS TO AVOID BUILD UP AND LOW
	WATER FLOW.
Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive	6. ATTACH THE FEMALE CONNECTIONS OF THE FLEXIBLE HOSES TO
cleaners, steel wool and harsh chemicals as these will scratch, dull, and/or	THE COLD AND HOT WATER SUPPLY .
damage the finish and void the warranty.		!	ENSURE THAT YOU USE PIPE TAPE
			AND ADJUSTABLE WRENCH, DO NOT
			OVER TIGHTEN AS THIS COULD
			CAUSE PRODUCT FAILURE LEADING
INSTALLATION			TO WATER DAMAGE.
	7. AFTER INSTALLATION IS COMPLETE,		TURN ON THE WATER
Installation must be done by a qualified licensed plumber.	SUPPLY AND ALLOW BOTH HOT AND COLD WATER TO RUN
Prior to installation please read the instructions thoroughly, confirm that all parts	SEPARATELY FOR AT LEAST TWO MINUTE EACH. WHILE
are included and visually inspect the unit for any defects.	WATER IS RUNNING, CHECK FOR LEAKS. IT IS IMPORTANT TO
	VIEW THE CONNECTIONS AT THE MALE AND FEMALE FLEXIBLE
If you have any questions please contact the Vigo Technical Support
	HOSE CONNECTIONS. IF LEAKS ARE DETECTED, REFER BACK			6
Department before proceeding with installation.	TO THE INSTRUCTIONS AND ADJUST ACCORDINGLY.
	TIGHTENING NUTS SLIGHTLY MAY STOP ANY MINOR LEAKS.

4

TROUBLESHOOTING

	PROBLEM	POTENTIAL CAUSE		CORRECTIVE ACTION
	1 - Leaks from handle	1.A - Cartridge unseated	1.A - Remove cartridge from housing, wash thoroughly with hot
	2 - Insufficient flow rate	1.B - Cartridge defective	water and reseat in housing.
	3 - Leak at connection points	2.A - Dirty aerator	1.B - Contact Vigo Technical Support for replacement.
		2.B - Clog in supply hose / line
	4 - Loose faucet body		2.A	- Remove and soak / clean with a non abrasive agent (i.e.
	5 - Sprayer button stops working
		3.A - Sprayer hose not tight	vinegar).
		3.B - Flexible hose leaking at body or connection point	2.B - Remove sprayer or supply line and flush lines
		4. - Metal nut became loose	3.A	- Remove sprayer and check integrity of the black washer.
			Make sure the washer is seated properly and retighten.
		5.A - Debris in aerator	3.B	- Tighten hoses. If this does not resolve the issue, remove
		5.B - Wear and tear on button	the flexible hose and rethread, checking to make sure the
			connection is secure. Make sure to use pipe tape.
			4. - From under the counter, use an adjustable wrench and
			tighten the metal nut to the hollow pipe. Make sure the faucet is
			perpendicular to the counter.
			5.A	- Remove and clean aerator.
			5.B	- Contact Vigo Technical Support for replacement.

PARTS LIST - For any parts needed but not shown, please contact Vigo Technical Support

PART	PART #	FINISH	SUPPLY DATE INDICATOR (INTERNAL USE ONLY)
Pull out Hose (black nylon)	74001	CH, ST, MB	W
Sprayer	74006	CH, ST, MB	W
Handle Lever	78009A	CH, ST, MB	W
Handle Set Screw	78009B	CH, ST, MB	W
Handle Body	78009C	CH, ST, MB	W
Sedal Cartridge	74035	-	W
Metal braided Hose	74020	-	W
Sprayer Washer	74008	-	W
Black Washer with Screen	74010	-	W
Flow Restrictor	78093W	-	W

TOLL FREE: (866) 591 - 7792

E-Mail: [e-mail]

www.vigoindustries.com

NSF / ANSI 61

5

VIGO INDUSTRIES, LLC ("VIGO")

FAUCET LIMITED LIFETIME WARRANTY

EFFECTIVE APRIL 1, 2013

VIGO offers the following limited warranty on each of its Faucet products (the "Product") and the components thereof. This warranty extends only to the original owner for personal household use. For commercial uses, additional limitations apply.

VIGO warrants the structure of the Product to be free from defects in workmanship and materials under normal use and service for the period commencing from the initial date of purchase by the owner, contractor, or builder, from VIGO or an authorized VIGO dealer, through the lifetime of the original owner or end-user.

VIGO warrants the cartridge component of the Product to be free from defects in workmanship and materials under normal use and service for a period of five (5) years from the initial date of purchase by the owner, contractor, or builder, from VIGO or an authorized VIGO dealer.

VIGO warrants the spray assembly and other mechanical components of the Product to be free from defects in workmanship and materials under normal use and service for a period of one (1) year from the initial date of purchase by the owner, contractor, or builder, from VIGO or an authorized VIGO dealer.

Subject to the Warranty Service provision below, any product reported to the authorized dealer or to VIGO as being defective within the warranty period will be repaired or replaced (with a product of equal value) at the option of VIGO. This warranty extends to the original owner and is not transferable to a subsequent owner.

Neither the distributor, authorized VIGO dealer, nor any other person has been authorized to make any affirmation, representation, or warranty other than those contained in this warranty. Any affirmation, representation, or warranty other than those contained in this warranty shall not be enforceable against VIGO or any other person.

VIGO reserves the right to modify this warranty at any time, it being understood that such modifications will not alter the warranty conditions applicable at the time of sale of the products in question.

Limitations

This warranty shall not apply to instances of incorrect operating procedures, breakages, or damages caused by fault through improper installation, carelessness, abuse, misuse, misapplication, improper maintenance, or alteration of the Product, as well as chemical or natural corrosion, accident, fire, flood, an act of God, or any other casualty. Avoid abrasive cleaners, steel wools, and harsh chemicals as these will scratch, damage, and / or dull the product and / or finish and void this warranty. The owner of the Product covered by the present warranty is entirely responsible for its proper installation and any applicable plumbing or electrical wiring. VIGO neither installs nor supervises the installation nor hires a contractor for this purpose; consequently, VIGO cannot be held responsible for any default, breakage, or damages caused thereby or resulting thereof, either directly or indirectly.

The owner must provide access to the components of the Product as described in the installation guide so that VIGO can execute the warranty specified herein. If such access is not available, all expenses to provide said access will be the responsibility of the owner.

This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by VIGO and all applicable rules, regulations, and legislation pertaining to such installations.

This warranty does not apply unless the VIGO Product is installed by fully insured licensed professionals. Vigo strongly recommends that such licensed professionals have experience in the installation of bathroom and kitchen products. [Installation of certain products, including without limitation glass products (i.e., shower doors and glass sinks) by an inexperienced person may result in product failure including, but not limited to, glass breakage which could result in personal injury or death.]

VIGO is not liable for personal injuries or deaths to any persons or for any direct, special, incidental, or consequential damage, loss of time, loss of profits, inconvenience, incidental expenses, labor or material charges, or any other costs resulting from the use of the product or equipment or pertaining to the application of the present warranty, or resulting from the removal or replacement of any product or element or part covered by this warranty.

EXCEPT AS OTHERWISE PROVIDED ABOVE, VIGO MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR COMPLIANCE WITH ANY CODE.

In any case, VIGO cannot be held liable for any amount over and above the purchase price paid for the Product by the owner/end-user, contractor, or builder.

Commercial Limitations

In addition to the above conditions and limitations, the warranty period for products installed for commercial applications or used in commercial ventures is one (1) year from the initial date of purchase by the owner, contractor, or builder from an authorized dealer. VIGO is not responsible for loss of use or profit under any circumstances. If the product is used as a display, the warranty period begins from the date of purchase. This warranty gives the owner specific legal rights. The owner may also have other rights which can vary from one state or province to another.

Warranty Service

In order to obtain service provided under this warranty during regular business hours, contact the dealer or distributor who sold the unit, or contact VIGO directly. VIGO will provide the warranty service described above when the following conditions have been met: the failure is of the nature or type covered by the warranty; the user has informed an authorized VIGO Agent or VIGO's warranty service department representative of the nature of the problem during the warranty period; conclusive evidence (e.g., proof of purchase or installation) is provided to the foregoing by the user proving that the failure occurred or was discovered within the warranty period; an authorized independent service person or company representative has been permitted to inspect the product during regular business hours within a reasonable time after the problem was reported by the user. Vigo's warranty obligation shall be discharged upon tender of replacement or repair. The customer's refusal to accept the tender terminates VIGO's warranty obligations.

Certification may be ended by VIGO or certification agencies without notice.

6