ViewZ VZ-070PM-3G Manual

Loading...

Operating Instructions

Broadcasting Monitor User guide

Monitor Operation Manual

VZ-070-TBBSV

VZ-070-TSBSV

V1.3

3G

1

 

Contents

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Getting Started

 

 

 

 

Setting

15

 

 

Contents

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OSD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Caution

3

 

 

 

Load System Default

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product features

5

 

 

 

Bklight Dimming

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Monitor View

6

 

 

 

Misc

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Initial Setup

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Basic Information

8

 

 

 

Advanced

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Output

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connections

 

 

 

 

Timecode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source Alias

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UMD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting to BNC Signal Device

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SDI input signal Format

 

 

 

 

System Info

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SDI output signal Format

 

 

 

 

H Flip

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting to HDMI Signal Device

9

 

 

 

Test Pattern

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI input signal Format

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI output signal Format

 

 

 

 

Function Key

17

 

 

 

 

 

 

Connecting to Component Signal Device

10

 

 

 

Marker

17

 

 

 

 

 

 

Component input signal Format

 

 

 

 

 

 

 

 

 

 

Handheld

18

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connecting to Composite Signal

Device

10

 

 

 

DSLR Scale

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Composite input signal Format

 

 

 

 

Peaking

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Peaking Sensitivity

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU Features

 

 

 

 

Peaking Color

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Peaking Blinking

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

False Color

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color Temp

 

 

 

 

False Color U/L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Brightness

 

 

 

 

False Color L/L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contrast

 

 

 

 

False Color Palette

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color

 

 

 

 

Limit Emphasis

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color Only

 

 

 

 

 

 

False Color Blink

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NTSC Setup

 

 

 

 

 

 

Limit Blink

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Max Bright

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Aspect Menu

12

 

 

Other Information

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Scan

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Aspect

 

 

 

 

Accessory

19

 

 

 

 

 

 

Anamorphic

 

 

 

 

Specification

20

 

 

 

 

 

 

Zoom Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H/V Delay

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Still

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A/V Scope

14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Scope Position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Waveform Enable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Waveform Source

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vector Enable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio Level Meter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Caution

Caution

It is highly recommended to read and understand the cautions listed below thoroughly before you start using the product. And if you are unclear with any parts of the cautions or have questions, please contact us.

Caution

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

WARNING – TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THE SET TO RAIN OR MOISTURE.

"IMPORTANT SAFETY INSTRUCTIONS"

Read these instructions

Keep these instructions

Heed all warnings

Follow all instructions

Do not use this apparatus near water

Clean only with a dry cloth

Do not block any of the ventilation openings. Install in accordance with he manufacturer's instructions

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet

□ Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus

Only use the attachments/accessories specified by the manufacturer.

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long periods of time

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus

Shall be connected to a MAINS socket outlet with a protective earthing Connection

The disconnect device shall remain readily operable

The socket-outlet shall be installed near the equipment and shall be easily accessible

3

Caution (cont'd)

Caution

Explanation of Safety Related Symbols

 

Manual contents are subject to change without notice

 

4

 

 

 

Product Features

Product

Product Features

 

 

 

 

Features

Integrated Converter

Integrated active SDI-HDMI and HDMI-SDI converter allows the transparent conversion of HD to

 

 

HDMI signal or conversion of HDMI back to HD format

 

Multi-Format Signal

ViewZ monitors are compatible with various sources including

 

 

- HDMI (compatible with DVI)

 

 

- SDI signals: 3G(425A/B), HD, SD

 

 

- CVBS(composite) and YPbPr(component)

 

3G-SDI: 3Gb/sec 4:4:4 HD

SMPTE 425 compliant HD display that supports frame rates of 50.60 in 1080p, 1080i, and

 

 

 

720p

 

SDI-HDMI Loop Through

 

Supports full SMPTE 425 signal conversion transparency from SDI to HDMI with test and

 

 

 

measurement overlays

 

12Bit Internal Processing Allows for color temperature and gamma encoding changes to be implemented quickly. Active

2K

 

Input Capability

 

Video Looping supports full 1080p/60 frames on the HDMI output

 

 

 

 

 

 

2k content can be displayed on ViewZ monitors without the loss of HD signal by converting and

 

 

 

 

 

 

 

 

 

downscaling the content

 

Peaking / Focus Assist

Peaking filter shows if the image is out of focus in difficult wide full range DSLR shots by

 

 

 

 

 

 

highlighting areas that are out of focus with a cross stripe pattern

 

 

 

 

 

 

 

 

 

 

 

 

DSLR Scaling

Actively scales live video images to reduce the black areas of the screen to allow for a ful screen 16:9

 

 

 

 

image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

False Colors Filter

Color filtering allows users to display different areas of the images as different colors to set portions of

 

 

 

 

 

the scene as over or under exposed

 

 

 

 

 

 

 

 

 

 

 

Under Monitor Display

UMD function displays ancilliary data at the bottom of the screen

 

Menu Jog Congrol

Jog dial on the front of the monitor enables users to control all features

 

Waveform Monitor

Onscreen display of video levels with respect to time, used to calibrate multiple camera setups and

 

 

 

 

 

vertical blanking level and color burst

 

Vector Scope Monitor

On-screen display of chrominance information in Cb and Cr channels. Display can be opaque or

 

 

 

 

 

 

solid against the visual display

 

Pixel to Pixel Mapping

1:1 pixel mode displays the original image resolution without scaling to match a certain resolution

 

 

 

 

 

 

or an aspect ratio

 

 

De-Embedded Audio Level Meter

De-embedded audio selected out. Auto sensing to display three range meter of

 

 

 

 

 

 

 

 

up to 16 ch

 

 

 

 

 

 

Aspect Format Markers

4:3, 14:9, 15:9, 16:9 etc. area, line, safety, center markers display

 

Gamma Encoding Select Range from 1.0 to 3.0 users selectable. Factory default setting is 2.8

 

 

 

 

 

 

 

 

 

Time Code

Time code reader displays embedded LTC or VITC formats

 

H/V Delay

View the blanking area and syncronize signals by displaying the horizontal and vertical intervals in the center of

 

 

 

 

the screen

 

 

 

RJ-45 Remote Control

Plug in your RJ-45 connector to the back of the monitor and communicate with other ViewZ

 

 

 

 

 

 

monitors (RS-485 control / Tally Light Control)

 

 

 

 

 

 

 

 

 

* Does not support P.O.E.

5

 

Monitor View

Monitor

Exterior Information

 

 

 

 

VZ-070XXXXX

View

monitor 221.5 x 126 (mm)

Stand 221.5 x 136 (mm)

Front

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Mount

4. Source select

5.

Function key F1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6. scan choice

7.

Function key F2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2. Tally display

8. Main menu open

9.

Function key F3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3. Speaker

10. EXIT

11. Function key F4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12. UP

13. Function key F5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14. DOWN

15. Function key F6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14. Power LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15.

Menu control Jog

 

Rear

1. Component [ Pr ], CVBS 3 in

2.

SDI signal in

 

 

14. RS-485 IN

 

 

 

 

 

3. Component [ Pb ], CVBS 2 in

4.

SDI signal out

13. V

mount

15. RS-485 OUT

 

 

 

 

 

 

 

5. Component [ Y ], CVBS 1 in

6.

Composite out

 

 

16. DC 12V Power in

7. Audio in L

8.

Audio in R

 

 

17. XLR Power in

9. PC Audio in

10. PC Audio out

 

 

18. On/Off switch

 

 

 

 

 

11. HDMI in

12. HDMI out

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Initial Setup

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

First Steps

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Initial

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When the monitor is powered on and connected to your source,

Setup

 

 

 

 

 

1

 

 

Selecting Input

 

- To select your source, please press SOURCE button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- Turn the main jog to make your choice,

 

and click the jog to select

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- Factory default is HDMI. Please skip this step if you are connected to HDMI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

source

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

Menu Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- Press the main jog on the front of the monitor for 2 seconds to enter

 

or exit the menu

 

 

 

 

- Turn the jog to move around the menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- Click the jog to make your selection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- Main jog allows users to move one step at a time. If you wish to move back to previous step in the menu, press

 

 

 

 

the jog for two seconds. If you want to exit the menu and restart, press exit button depending on where you are in

 

 

 

 

menu tree

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- If you click the jog without entering the main menu, brightness, contrast, color, and volume control will be

 

 

 

 

available. For an example, click the jog 2 times to control contrst and 4 times to change volume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

Function

 

key

 

 

 

 

Factory default

 

setting for programmable keys on the front of the monitor

 

 

 

VZ-070XXXXX

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F1

 

Blue/Mono

 

 

 

 

 

 

F2

 

H/V Delay

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F3

 

Max Bright

 

 

 

 

 

 

F4

 

SDI Output

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F5

 

HDMI Output

 

 

 

 

 

 

F6

 

Aspect

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- Users can program 6 function buttons on the front by

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU

 

 

 

 

 

Function Key

 

 

 

 

Function Key #

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- All featuress

 

in

 

the monitor can be

 

programmed in one of these six keys

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

+ 14 hidden pages