ViewEra V171 V171 V171, V150, V171 User Manual

772.96 Kb
Loading...

15”/17”TFT-LCD MONITOR

V150/ V171

USER’S MANUAL

Rev. 1.1

www.viewera.com

CONTENTS

1.

Introduction

 

 

Product Description ........................................................................................

Page 1

 

Package Contents

 

 

Product Features ….........................................................................................

 

 

Screen Cleaning Techniques

 

 

Additional

 

2.

Control Functions ……………………………………………………...…..

Page 5

3.

Input Diagrams .............................................................................................

Page 10

4.

Installation.....................................................................................................

Page 11

5.

Product Specifications..................................................................................

Page 12

6.

Dead Pixel Policy……...................................................................................

Page 16

7.

Warranty and Customer Service ................................................................

Page 16

8. Windows Setup .............................................................................................

Page 17

9.

Trouble Shooting …………………………………………………………..

Page 19

1. Introduction

Product Description

Congratulations on your purchasing ViewEra 15”/17”LCD monitor. It incorporates high quality display into a small light weighted module. It has power-saving capabilities and emits no radiation. You will certainly benefit from this monitor in lots of ways; to name some of them: comfort, safety and environmental protection.

This LCD monitor incorporates color active matrix thin-film-transistor (TFT) liquid crystal display to provide superior display performance. Its maximum resolution is 1024x768(SVGA) for V150, 1280 x 1024 (SXGA) for V171. The V150/V171 also includes built-in speakers, one touch image adjusting and OSD (On Screen Display) controls.

Package Contents

Included with your LCD monitor as following items

15”/17”TFT LCD monitor

15 pin D-sub signal cable

Audio Cable

Power cord

Power adapter

User’s manual

Page 1

Product Features

High brightness, high contrast ratio and quick response tiem.

Built-in speakers.

Power management system conforms to VESA DPMS standard.

Support Plug & Play, no need for driver installation.

Advanced OSD controls for picture quality adjustment.

Detachable stand for wall-mounting with VESA 75 (mm) bracket.

Screen cleaning techniques

Gently clean the screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth, to remove dust and other particles that can scratch the screen.

Do not apply pressure to the screen surface while cleaning.

Do not pour or spray any liquid directly onto the screen or casing. Chemical cleaners have been reported to damage the screen or case of the LCD monitor.

Page 2

Additional

Read all of these instructions and save them for later use.

Follow all warnings and instructions on the product.

Product

Do not cover block the vent holes in the case.

Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They may cause accident fire, electric shock or failure.

Disconnect the power plug from the AC outlet if you will not use it for an extended period of time. Do not attempt to service this product yourself, as opening or removing covers may expose you to

dangerous voltage points or other risks.

Do not touch the screen directly with your fingers. You may damage the screen, and oil from your skin is difficult to remove.

Do not apply pressure to screen. The LCD is very delicate.

Power

Use the type of power indicated on label.

Plugs

Do not remove any of the prongs of the monitor’s three-pronged power plug. Disconnect the power plug from the AC outlet under following conditions

When the power cord or plug is damaged or frayed.

The product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician.

If the product exhibits a distinct change in performance, service may be required.

Page 3

Power and extension cords

Do not allow anything to rest on the power cord.

Do not locate this product where persons will walk on the cord.

Use the proper power cord with correct attachment plug type. If the power source is 120V AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country’s safety regulations, such as VDE for Germany.

Do not over load wall outlets or power cords. Ensure that the total of all units plugged into the wall outlet does not exceed 10 amperes.

Ensure that the total ampere ratings on all units plugged into the extension cord is not above the cord’s rating.

If the power supply cord, which came with your monitor, is to be connected to the PC instead of the wall outlet, Use an UL/TUV approved computers with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum) only.

Environment

Place the monitor on a flat and leveled surface. Place the monitor in a will-Ventilated place. Keep the monitor away from

Overly hot, cold or humid places, places directly under sunlight, dusty surroundings, equipment that generate strong magnetic fields.

Please adjust the frequency to 75 Hz after setting up the LCD monitor.

Then push the OSD menu button and use the Auto Adjust function to find the best mode of your computer.

Page 4

2.Control Functions a. PC,Audio,DVI

Control Button Front View (Model : V150 V171 series)

2 5 1 3 4

1. Power switch

Power switch & LED.

2. Auto adjust

Press this button to obtain the best display quality.

3.Adjust (decrease ) This button is used to decrease the value of selected function.

4.Adjust (increase ) This button is used to increase the value of selected function.

5.OSD menu / Enter Press this button and the OSD menu pops up on the screen. It’s

also used to enter the functions in the OSD.

Page 5

+ 16 hidden pages