45 M-FIAM5
Military 28Vin Filter Input Attenuator Module
Features
•EMI filtering-MIL-STD-461E
•Transient protection-MIL-STD-704E 1
•Environments-MIL-STD-810, MIL-STD-202
•Environmental stress screening
•Low profile mounting options
• |
Output current up to 20 Amps |
Shown actual size: |
• |
Mini sized package |
2.28 x 2.2 x 0.5 in |
• |
Inrush current limiting |
57,9 x 55,9 x 12,7 mm |
• |
Reverse polarity protection |
|
Product Highlights
The M-FIAM5 is a DC front-end module that provides EMI filtering and transient protection required in military applications. The M-FIAM5 enables designers using Vicor 2nd Generation 24V DC-DC converters to meet conducted emission/conducted susceptibility per MIL-STD-461E; and input transients per MIL-STD-704E1 . The M-FIAM5 accepts an input voltage of 18-36Vdc and delivers output current
up to 20 Amps.
M-FIAM5 is housed in an industry standard "half brick" module measuring 2.28" x 2.2" x 0.5" and depending upon model selected, may be mounted on-board or in-board for height critical applications.
Compatible Products
•2nd Generation 24V Input DC-DC converters
Part Number Format
M-FIAM5 M 2 1
Product |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pin Style |
|
|
|
|
Product Grade(°C) |
|
1 |
= Short |
|
|
Baseplate |
|
H = –40 to +100 |
|
2 |
= Long |
|
1 |
= Slotted |
|
M = –55 to +100 |
|
*S=Short ModuMate |
|
2 |
= Threaded |
||
|
|
|
*N=Long ModuMate |
|
3 |
= Thru-hole |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*Compatible with SurfMate and InMate socketing system.
Absolute Maximum Rating
Parameter |
Rating |
Unit |
Notes |
+In to –In |
36 |
Vdc |
Continuous |
+In to –In |
50 |
Vdc |
100ms |
Mounting torque |
5(0.57) |
in-lbs |
6 each, #4-40 or M3 |
Pin Soldering temperature |
500 (260) |
°F(°C) |
<5 sec; wave solder |
Pin Soldering temperature |
750 (390) |
°F(°C) |
<7 sec; hand solder |
Operating temperature H–Grade |
-40 to +100 |
°C |
Baseplate |
Storage temperature H–Grade |
-55 to +125 |
°C |
|
Operating temperature M–Grade |
-55 to +100 |
°C |
Baseplate |
Storage temperature M–Grade |
-65 to +125 |
°C |
|
|
|
|
|
Specifications
(typical at TBP = 25ºC, nominal line, 75% load, unless otherwise specified)
Parameter |
Min |
Typ |
Max |
Remarks |
Input voltage |
18Vdc |
28Vdc |
36Vdc |
Continuous |
Output current |
|
|
20A |
|
Inrush limiting |
|
|
0.007A/µF |
|
Transient immunity |
MIL-STD-704E |
|
See footnote 1 |
|
EMI:MIL-STD-461E |
|
|
|
|
Conducted emissions: |
CE101, CE102 |
|
|
|
Conducted susceptibility: CS101, CS114, CS115, CS116 |
|
|||
Dielectric withstand |
|
1,500Vrms |
|
Input/Output to Base |
|
|
2,121Vdc |
|
Input/Output to Base |
Efficiency |
96% |
98% |
|
|
Internal voltage drop |
|
0.5 |
1.0 |
@20A, 100°C baseplate |
ON/OFF control |
|
|
|
|
Enable (ON) |
0.0Vdc |
|
1.0Vdc |
Referenced to –Vout. |
Disable (OFF) |
3.5Vdc |
|
5.0Vdc |
100kΩ internal pull-up resistor |
External capacitance |
|
|
|
See illustration C1 on page 3. |
|
330µF |
|
1000µF |
50V |
Weight |
|
3.1 (88) |
4 (113) |
Ounces (grams) |
Warranty |
|
|
2 |
Years |
1 MIL-STD-704E Compliance requires an external circuit. See addendum A
Thermal Resistance
Parameter |
Typ |
Baseplate to sink; flat, greased surface |
0.16°C/Watt |
Baseplate to sink; thermal pad (P/N 20264) |
0.1°C/Watt |
Baseplate to ambient |
7.9°C/Watt |
Baseplate to sink; 1000 LFM |
2.2°C/Watt |
|
|
MTBF per MIL-HDBK-217F
Temp |
Environment |
MTBF |
Unit |
25°C |
Ground Benign:G.B. |
3,334,295 |
Hrs |
50°C |
Naval Sheltered:N.S. |
786,893 |
Hrs |
65°C |
Airborne Inhabited Cargo:A.I.C. |
650,187 |
Hrs |
|
|
|
|
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 |
MFIAM5 |
Rev. 1.7 |
Page 1 of 5 |
Set your site on VICOR at www.vicorpower.com
Environmental Qualification
Altitude
MIL-STD-810C, Method 500.2, Procedure I & II, 40,000 ft. and 70,000 ft. Operational.
Explosive Atmosphere
MIL-STD-810F, Method 511.4, Procedure I, Operational.
Vibration
MIL-STD-810F, Method 514.5, Procedure I, Category 14, Sine and Random vibration per Table 514.5C for Helicopter AH-6J Main Rotor with overall level of 5.6 grams for 4 hours per axis. MIL-STD-810F, Method 514.5C, General Minimum Integrity Curve per Figure 514.5C-17 with overall level of 7.7 grams
for 1 hour per axis.
Shock
MIL-STD-810-F, Method 516.5, Procedure I, Functional Shock,40 G's. MIL-S-901D, Lightweight Hammer Shock, 3 impacts/axis, 1,3,5 ft. MIL-STD-202F, Method 213B, 60 G's, 9ms half sine. MIL-STD-202F, Method 213B, 75 G's, 11ms Saw Tooth Shock.
Acceleration
MIL-STD-810F, Method 513.5, Procedure II, table 513.5-II, Operational, 2-7 G's, 6 directions.
Humidity
MIL-STD-810F, Method 507.4, Procedure I, Cycle I, 240 hrs, 95% RH.
Solder Test
MIL-STD-202F, Method 208, 8 hour aging.
Environmental Stress Screening
|
H Grade |
M Grade |
|
Operating Temp. |
-40°C to +100°C |
-55°C to +100°C |
|
Storage Temp. |
-55°C to +125°C |
-65°C to +125°C |
|
Temp. Cycling:* |
12 cycles |
12 cycles |
|
-65°C to +100°C |
-65°C to +100°C |
||
|
|||
Ambient Test |
Yes |
Yes |
|
@ 25°C |
|||
|
|
||
Power Cycling |
12 hours, |
24 hours, |
|
Burn-In: |
28 cycles |
56 cycles |
|
Functional and |
-40°C and |
-55°C and |
|
Parametric |
|||
+100°C |
+100°C |
||
ATE Tests: |
|||
|
|
||
Hi-Pot Test |
Yes |
Yes |
|
Visual Inspection: |
Yes |
Yes |
|
Test Data |
vicorpower.com |
vicorpower.com |
|
|
|
|
*Temperature cycled with power off, 17°C per minute rate of change.
Conducted Noise
Transient Immunity
Figure 1– M-FIAM5 and Model V24A12M400A DC-DC converter operating at 28Vdc, 400W.
Inrush Limiting
Figure 2 – Transient Immunity: M-FIAM5 output response to an input transient.
Figure 3– Inrush Limiting: Inrush current with 1000µF external capacitance.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 |
MFIAM5 |
Rev. 1.7 |
Page 2 of 5 |
Set your site on VICOR at www.vicorpower.com