Vestax CDX-15 User Manual

394.84 Kb
Loading...

Professional Dual CD Player

OWNER'S MANUAL

VESTAX CORPORATION

VESTAX America

VESTAX (Europe)Ltd.

CONGRATULATIONS!

Thank you for purchasing the VESTAX CDX-15, DUAL CD PLAYER. Please read this owner's manual carefully before you start to use the machine, so that you will fully understand all of the special features and enjoy the full use of the product.

C A U T I O N

1

F C C

2

IMPORTANT SAFEGUARDS

4

F E A T U R E S

4

C D S E C T I O N

5

MIXER SECTION

9

REAR PANAEL

10

CONNECTION EXAMPLE

10

O P E R A T I O N

11

SPECIFICATIONS

12

C A U T I O N

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTl0N TO REDUCE THE RlSK OF ELECTRlC SHOCK

DO NOT REMOVE COVER OR BACK

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVlCING T0 QUALIFIED SERVlCE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated“dangerous voltage”within the product's enclosure that may be of sufficient magnitude to consitute a risk of electric shock to persons

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance

T0 REDUCE THE RISK 0F FIRE 0R ELECTRlC SHOCK DO NOT EXPOSE THIS APPLIANCE T0 RAIN 0R M0ISTURE

CAUTION TO PREVENT ELECTRIC SHOCK,MATCH BLADE OF PLUG TO WIDE SLOT FULLY INSERT

ATTENTION P0UR EVITER LES CH0CS ELECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESP0NDANTE DE LA PRISE ET P0USSER JUSQU’AU F0ND

1

N O T E

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequeney energy and, If not installed and used in accordance with the lnstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the recelving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experiencced radio/TV technician for help.

N O T E

Changes or modifications may cause this unit to fail to comply wiht Part 15 of the FCC Rules and may void the user's authority to operate the equipment.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la Classe B respecte toutesles exigences du Réglement sur le matérier brouilleur du Canada.

IMPORTANT

This apparatus is fitted with an approved moulded 13 Amp plug.To change a fuse in this type of plug proceed as follows:

1.Remove fuse cover and fuse.

2.Fix new fuse which should be a BS1362 5A. A.S.T.A. or BSI approved type.

3.Refit the fuse cover.

If the fitted plug is not suitable for your sockel outlets, It should be cut off and an appropriate plug fitted in its place. It the mains plug conlains a fuse. this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.

N O T E

The severed plug must be destroyed to avoid a possible shock hazard it be inserted into a 13A socket elsewhere.

CLASS 1 LASEN PNOOCUT LUOKAN 1 LASENLAITE KLASS 1 LASENAPPANAT

HOW TO CONNECT A PLUG

The wires in the mains lead are coloured in accordance with the following code: BLUE-"NEUTRAL"("N")

BROWN-"LIVE"(L")

1.The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured BLACK.

2.The BROWN wire must be connected to the terminal which is marked with the letter "L" or coloured RED.

3.Do not connect either wires to the earth terminal in the plug which is marked by the letter "E" or by the safely earth symbol or coloured green or green- and-yellow.

Betore replacing the plug cover, make cenain that the cord grip is clamped over the sheath of the lead-not simply over the two wires.

2

IMPORTANT SAFEGUARDS

READ BEFORE OPERATING EQUIPMENT

T h i s p r o d u c t w a s d e s i g n e d a n d m a n u f a c t u r e d t o m e e t s t r i c t q u a l i t y a n d s a f e t y s t a n d a r d s . T h e r e a r e , h o w e v e r , s o m e i n s t a l l a t i o n a n d o p e r a t i o n p r e c a u t i o n s w h i c h y o u s h o u l d b e p a r t i c u l a r l y a w a r e o f .

1.Read instructions-All the safety and operating instructions should be read before the appliance is operated.

2.Retain instructions-The safety and operating instructions should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions should be followed.

5.Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6.Attachments-Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this product near water-for example, near a dath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories-Do not place this product on an unstable cart, stand, tripod, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart,. stand, tripod, bracket, or table recommended by the manufacturer, or sold with product. Any mounting of the appliance should follow the manufacturer's instructions, and sholud use a mounting accessory recommended by the manufacturer.

9.Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placting the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

10.Power sources-This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.

11.Grounding or Polarization-This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This piug will fit into the power outlet only one way. This is safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If this should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power-Cord Protection-Power supply cords should be routed so that they are not likely to be walked on or pinched by intems placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Protective Attachment Plug-The appliance is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.

14.Lightning-For added protection for this product during lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.

15.Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

3

16.Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

17.Servicing-Do not attempt to service product yourself as opening or removing covers may expose you to dangerrous voltage or other hazards. Refer all servicing to qualified sersonnel.

18.Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supply cord or plug is damage.

b.If liquid has been spilled or objects have fallen into the product.

c.If the product has been exposed to rain or water.

d.If the product dose not operate normally by following the operating instructions. Adjust only those controls that are coverd by the operating instructions as an improper adjustment of other, controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

e.If the product has been dropped or cabinet has been damaged.

f.When the product exhibits a distinct change in perfromance-this indicates need for service.

19.Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characterristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards.

20.Safety Check-Upon completion of any service or repairs to product, ask the service technician to perfrom sefety checks to determine that the product is in proper operating condition.

21.Carts and Stands-The appliance should be used only with a cart stand that is recommended by manufacturer.

22.An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

F E A T U R E S

The combination of a 10 second buffer memory and the shockproof mechanism support system prevents the CDX-15 from skipping caused by physical and acoustic vibration. This feature enables the CDX-15 to be used in any situation, such as professional, club or mobile application.

CD mixing can be done without an external mixer by using the built-in crossfader. The CD signal can be monitored through headphones without reproduction from the Master output, by using the monitor select switch.20

Last stop position can be recalled instantly for replay with the Cue button.

+/-10% pitch control fader is provided for quick and accurate beat matching.

Dual function joystick is provided for easy cueing and pitch bending.

Single / All repeat switch enables repeat play of either one song or the whole CD. Top loading type dual CD Player system features combined high performance CD Players and controllers.

4

+ 11 hidden pages