Venturer PLV76198E User Manual

0 (0)

19” LCD TV

PLV76198E

OWNER’S MANUAL

PLV76198S23E10 IB ENG.indd 1

 

 

9/8/2009 9:57:23 AM

 

 

 

 

 

 

Safety Precautions

caution

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE AVIS RISQUE DE CHOC ÉLECTRIQUE -NE PAS OUVRIR

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual.

The symbol for Class II (Double Insulation)

CAUTION:

•DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY

WITH THE SAME OR EQUIVALENT TYPE.

•TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF WALL OUTLET, THEN FULLY INSERT.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

WARNING:

To reduce the risk of fire or shock hazard, do not expose this unit to rain or moisture.

Main plug is used as disconnect device and it should remain readily operable during intended use.

The unit shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on unit.

In order to disconnected the unit from the mains completely, the AC power cord should be disconnected from the mains socket outlet completely.

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

PLACEMENT INFORMATION

Do not use this unit in places which are extremely hot, cold, dusty or humid.

Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, by placing it on bedding or carpeting.

SAFETY INFORMATION

When connecting or disconnecting the AC power cord, grip the plug and not the cord itself. Pulling the cord may damage it and create a hazard.

When you are not going to use the unit for a long period of time, disconnect the AC power cord.

CONDENSATION INFORMATION

When left in a heated room where it is warm and damp, water droplets or condensation may form inside the equipment. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1-2 hours before turning the power on or gradually heat the room and let the unit dry before use.

RATING PLATE LOCATION

The rating plate is located on the rear of the unit.

FCC STATEMENTS

This device complies with Part 15 of the FCC Rules. Operationissubjecttothefollowingtwoconditions:(1)This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is not guarantee that interference will not occur in a particular installation. If this unit does cause harmful interference to radio or television reception, which can be determined by turning the unit off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the unit and receiver.

-Connect the unit into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

-Shielded cables must be used with this unit to ensure compliance with the Class B FCC limit.

-This television receiver provides display of television closed captioning in accordance with Section 15.119 of the FCC rules.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the unit.

GB - 2

PLV76198S23E10 IB ENG.indd 2

 

 

9/8/2009 9:57:24 AM

 

 

 

 

 

 

IMPORTANT SAFETY INSTRUCTIONS

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with a dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat.

9)Do not defect the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your wall outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments / accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

GB - 3

PLV76198S23E10 IB ENG.indd 3

 

 

9/8/2009 9:57:24 AM

 

 

 

 

 

 

Table of Contents

Safety Precautions..............

2

IMPORTANT SAFETY

 

INSTRUCTIONS............................

3

Table of Contents.................

4

QUICK INSTALLATION.................

5

Turning On the Unit for the first

time...............................................................

5

ACCESSORIES.............................

6

GETTING STARTED......................

6

USING THE REMOTE CONTROL..................

6

CONTROL REFERENCE

 

GUIDE........................................

7-8

Remote Control......................................

7

TV...................................................................

8

CONNECTIONS ......................

9-10

CONNECTING A TV ANTENNA / CABLE /

SATELLITE.....................................................

9

CONNECTING TO A VCR / CAMCORDER /

VIDEO GAME SYSTEM / CABLE / SATELLITE

SYSTEM.........................................................

9

CONNECT THE POWER CORD..................

10

USING HEADPHONES...............

10

INSTALLATION...........................

11

INSTALLING / REMOVING THE BASE

STAND..........................................................

11

MOUNTING ON THE WALL.........................

11

TV SETUP..............................

12-13

PICTURE MENU..........................................

12

AUDIO MENU..............................................

12

TV MENU.....................................................

13

SETUP MENU..............................................

13

TROUBLESHOOTING GUIDE.... 14

MAINTENANCE..........................

14

limited warranty............

15-16

GB - 4

PLV76198S23E10 IB ENG.indd 4

 

 

9/8/2009 9:57:24 AM

 

 

 

 

 

 

Venturer PLV76198E User Manual

QUICK INSTALLATION

When you turn on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit as shown.

2 3/8”

7 7/8”

2 3/8”

1. Connect an antenna or Cable TV COAX cable to the TV's antenna input jack.

2. Connect the power cord.

3. Press the / ON button to turn on the unit.

4. Use the/button to highlight OSD Language, then press the ENTER or button to select the menu language from English / Español / Français.

5.Press the / button to highlight Antenna, then use the ENTER orbutton to select “Air”, “Cable STD”, “Cable HRC”, “Cable IRC” or “Cable Auto“.

6.Use the / button to highlight Auto Scan, then press the

ENTER orbutton to confirm.

7. The unit will immediately search all channels for those with adequate signal strength and store those channels with signals in memory. The unit will take a few minutes to finish auto scan and after this is completed, the unit will switch to the first channel found.

If you subscribe to Cable TV Service, we recommend you pick "Cable Auto", however you might find you get improved results using "Cable STD", "Cable IRC", or "Cable HRC" - these are different standards used by various Cable Systems.

Turning On the Unit for the first time

The first time you turn on the unit, the unit will enter the setup mode. You can easily follow the prompt message on the screen to complete basic TV settings.

Make sure the TV antenna or CATV cable has been connected properly to the TV antenna input jack on the rear of the system.

GB - 5

PLV76198S23E10 IB ENG.indd 5

 

 

9/8/2009 9:57:24 AM

 

 

 

 

 

 

Loading...
+ 11 hidden pages