Venturer DPF561SE User Manual

4 (1)
Venturer DPF561SE User Manual

Digital Photo Frame

Operating Instructions

DPF561SE

Need More Help?

DO NOT RETURN THIS PRODUCT TO THE STORE Please visit online help at http://www.1800customersupport.com

SAFETY PRECAUTIONS

CAUTION: TO REDUCE THE RISK OF

ELECTRICSHOCK,DONOTREMOVE

COVER (OR BACK).

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIEDSERVICEPERSONNEL.

The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner's manual.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.

On Placement

Do not use the unit in places that are extremely hot, cold, dusty or humid.

Do not restrict the airflow of the unit by placing it in a place with poor airflow, by covering it with a cloth, or by placing it on carpeting.

Keep the stand of the unit clear from cables. Cables could pull the unit to the floor.

The unit should not be exposed to excessive heat such as sunshine, fire or the like.

On Safety

When connecting or disconnecting the AC power adapter, grip the plug and not the cord itself. Pulling the cord may damage it and create a hazard.

When you are not going to use the unit for a long period, disconnect the AC power adapter.

Temperature and Humidity Limitations

Operating temperature: 41°F ~ 95°F (5°C ~ 35°C)

Humidity: 20% ~ 80%

Rating Plate Location

• The rating plate is located on the back of the unit.

WARNING: Should any trouble occur, disconnect the AC power adapter and refer servicing to a qualified technician.

Turn off the unit before inserting or removing the memory card.

Do NOT insert or remove the memory card when the unit is playing files.

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding - type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with a cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

Portable

the apparatus. When a cart is used, use caution

Cart Warning

when moving the cart/apparatus combination to

 

avoid injury from tip-over.

 

13.Unplug this apparatus during lightning storms or when unused for long periods.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC Statements

This device complies with the Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesirable operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an AC power outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

QUICK START GUIDE

For easy removal, memory card will stick out a bit.

Insert a memory card.

 

 

To AC 120V outlet

 

AC Power

Back of Unit

Adapter

OFF ON

Slide the OFF/ON switch to ON

position.

To DC IN 9V jack

ACCESSORIES

Please check and identify the supplied accessories.

To order accessories visit web site (http://www.1800customersupport.com)

AC Power Adapter ....................................................................................

x 1

Stand ........................................................................................................

x 1

CONTROL REFERENCE GUIDE

2

ENTER ROTATE MENU

3

SD

XD

MS

1

 

4

 

DCIN 9V

6

5 OFF ON

OFF

1.LCD Screen

2.Function Buttons

Button

Press to start, pause and resume photo slide show playback.

Press and hold to display the thumbnail menu. Use the , , buttons to select a photo, press the

button to start playback.

ENTER Button

Confirm settings in the Setup Menu.

, , Buttons

Move between selections on the Setup Menu screen.

: Skip to the previous photo.

: Skip to the next photo.

ROTATE Button

Rotate the photo by 90o.

Press and hold the ROTATE button to change the display aspect ratio (Fit Screen or Return to normal).

MENU Button

Enter and exit the Setup Menu.

3.SD / xD / MS Card Slot

4.DC IN 9V Jack

5.OFF / ON Switch

6.Removeable Stand

INSTALLATION

Using the Stand

The unit can be placed either horizontally or vertically to fit the photos on display by its stand.

1. Slide the stand into the slots on the back of the unit as illustrated.

2. Place the unit horizontally or vertically.

Mounting on the Wall

The unit can be mounted either horizontally or vertically on the wall by the mounting holes on the back of the unit.

Caution:

Mounting the unit requires special skills that should only be performed by qualified personnel.

Make sure that the wall mount is being fixed securely enough so that it meets

safety standards.

64mm

 

116mm

 

OFF ON

 

 

ON

 

OFF

POWER SUPPLY

RIGHT SIDE OF UNIT

AC Power Adapter

Back of Unit

OFF ON

Slide the OFF/ON

switch to ON position. To

AC 120V outlet

To DC IN 9V jack

Caution:

The AC power adapter included with this unit is for its use only. Do not use it with other equipment.

Turn off the unit before unplugging the AC power adapter from the unit to avoid the unit being damaged.

When the unit is not going to be used for a long time, disconnect the AC power adapter from the AC power outlet.

Important:

Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from the wall outlet at once.

When the AC power adapter is plugged in, the apparatus is not completely disconnected from the main power source, even when the unit is turned off.

Warning:

The AC power adapter is used as the disconnect device. To completely disconnect the apparatus from the main power supply, the AC power adapter should be disconnected from the AC power outlet completely.

INSERTING MEMORY CARD

Turn off the unit before inserting or removing the memory card.

Do NOT insert or remove the memory card when the unit is playing files.

The unit is compatible with the following Memory Card:

• Secure Digital Card (SD) • Memory Stick Pro (MS Pro) • Extreme Digital (xD)

Insert any compatible memory card with the front label facing the rear of the product. Do not force the memory card into the memory card slot.

For easy removal, memory card will stick out a bit.

SD/MMC

MS Pro

xD

Note:

If you can not easily insert a memory card (not included), try turning the card over and inserting it again.

E - 1

E - 2

E - 3

E - 4

Loading...
+ 1 hidden pages