INSTUCTION MANUAL MOD. R-675
2000W Ionic Hair Dryer
------------------------------------------------
Use and Care Instruction Manual
Before using the appliance for the first time please read the
instruction manual carefully!
Operating Instructions
This appliance is intended for household use only
A
Appliance Features:
A — Air-outlet
B — Air intake cap and removable air filter
C — Cool shot button
D — Heat & speed control buttons
E — Decoration
F — Hang-up loop
SAVE THIS INSTRUCTIONS
Important Safety Instructions
WARNING: Do not use this appliance near water contained in bath-tubs, basins or
other vessels. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance.
WARNING: This appliance must not be taken into the bathroom. When the appliance is
used in a bathroom, unplug it after use since the proximity of water presents a hazard
even when the appliance is switched off. For additional protection, the installation of a
residual current device (RCD) with a rated residual operating current not exceeding
30mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for
advice.
WARNING: If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in order to avoid a hazard.
Keep this appliance away from water. Plug your hair dryer into an alternating
current (~) outlet only. Be sure that household voltage corresponds to voltage marked
on the hair dryer. Neither should the appliance be used with wet hands nor immersed in
water, held in running water, or allowed to become wet (e.g., as in splashing). Always
unplug appliance when not in use. Do not place heated appliance on any heat-sensitive
surface when hot or when plugged in. When using the appliance, care must be taken to
prevent hair ingress into the air inlet openings.
Note: Use on towel dried hair only.
B
C
D
E
F
Overheating Cutoff
This appliance is equipped with a thermostat that will cycle OFF(O)if the temperature
exceeds the comfort level due to partially blocked air inlet or outlet openings. In the
event that the appliance only produces cool air, turn the appliance OFF(O)and allow it to
cool down. Once the appliance cools, the thermostat will automatically reset and usage
may resume. During use, do not block the air openings. Periodic cleaning of the rear
intake cap is required to maintain proper performance. While using this hair dryer, it will
get hot at the air outlet. Avoid touching the air outlet or any accessories attached to the
outlet.
Storage
When not in use “unplug it.”
Allow the appliance to cool and store in a dry location. Never wrap the cable around the
appliance. Since this will cause the cable to wear prematurely and break. If the supply
cable of this appliance becomes damaged. It must be replaced by returning to the
retailer from which the product was purchased or a similarly qualified person in order to
avoid a hazard. Regularly check the main cable for wear and damage. particularly where
it enters the appliance and the plug.
This product carries the CE mark and is manufactured in conformity with the
Electromagnetic Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC.
New Ionic Technology
This new anti-static ionic hair appliance dries your hair faster. Negative ions reduce the
size of water droplets on the air. Allowing more water to be absorbed. This helps
condition, soften and make the hair shinier. The ionic function automatically operates
when the unit is switched ‘On’.
Ionic Technology-how it works.
1. Negative ions cause large water droplets on the hair to be broken up in to smaller
drops.
2. When droplets are smaller, more water is absorbed into the hair, hence the hair is
dried quicker.
3. This also adds more moisture to the hair follicle, which has a conditioning and
smoothing effect.
4. More light is reflected off a smooth surface, which will therefore make the hair look
shinier.
Styling
Towel dry hair before using the hair dryer, Set the dryer on High set setting and speed
and circulate airflow through hair, but do not concentrate airflow on any one area for a
long period of time. As soon as hair is almost completely dry, lower the speed and setting
and use a styling brush to shape hair.
Heat and Speed Control Button
High temperatures and speed settings are ideal for fast drying or pre-drying; low
temperatures and speed settings are ideal for styling.
Heat-switch Control:
●=cold S=warm SS=hot
Speed-switch Control:
0=off
ⅠⅠⅠⅠ
=gentle airflow
ⅡⅡⅡⅡ
= strong airflow
Airflow Concentrator Nozzle
Before drying thick hair with this attachment, use the dryer on the high setting to remove
excess moisture. The airflow concentrator nozzle attachment channels airflow for
smooth, manageable drying. Do not concentrate the airflow on any one area for an
extended period of time. If you desire to dry your hair quickly, remove the attachment
and set the dryer at the highest heat and speed setting.
Cleaning the Hair Dryer and Air Intake Cap
Wipe the outlet surface of the hair dryer with a slightly moist cloth, then wipe dry. This
dryer is a precision-designed professional tool. It must breathe to operate at peak
efficiency. To ensure this, be sure the air intake cap is always free from lint, hair, and
other matter. Ensure the unit is not operating or connected to the mains supply. To clean,
remove the air intake cap, then clean the air intake cap with a vacuum or brush. This
should be done regularly.
Cool Shot Button
Once the desired style is achieved, push the Cool Shot button to set the style with a flow
of cool air.
Hang-up Loop
This hair dryer features a loop allowing it to be conveniently hung on a hook for easy
access.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a
dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for
the environment and health, deriving form inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of household appliances separately, the
product is marked with a crossed-out wheeled dustbin.
Loading...