Size:
7.82 Mb
Download

UW Series Hardmount

Washer-Extractors

35 lb Washer-Extractor

60 lb Washer-Extractor

80 lb Washer-Extractor

100 lb Washer-Extractor

125 lb Washer-Extractor

150 lb Washer-Extractor

Expert Solutions from the Laundry Experts

Your

Solution

Starts Here

5key points:

Labor-CostSavings

Utility-CostSavings

Value For Your Money

Proven Performance

Warranty

Labor-CostSavings

Did you know labor costs eat up 50% of your laundry dollar? Imagine the thousands of dollars you’d save if you could reduce your laundry labor by 30 minutes per day!

UniMac’s UWTV Series Washer-Extractortransforms your dream into reality.

Four Fast-FillWater Valves(instead of the customary two) fill UWTV models much faster, shaving valuable minutes off every cycle.

Extraction Speeds of up to 300 G-Force — that’s2-3times the G’s of most machines — aid UniMac’s UWTV models in reducing the amount of moisture left in washloads. This greatly reduces drying time, saving significantly on labor costs.

 

Advanced

Computer

 

 

 

 

Control, UniLinc™ boldly

 

 

displayscycletime remaining

 

 

tomoreefficiently utilize labor.

 

 

The easy-to-usedisplay

 

 

makes training simple, and

 

 

ensures the proper cycles

 

 

 

are used each time. The management reports provide

 

time and date stamps of each cycle, including the idle

 

time between cycles. The UniLinc™ control is your

 

laundry partner helping lower labor costs.

 

A Rapid Jetspray Rinsesaves nearly

three minutes on every rinse step! The spray rinse pulls water through linens, allowing it to drain immediately, rather than cycling through the timeconsuming fill, agitation and drain phases of the traditional bath rinse.

This is one of UniMac’s most impressive timesaving features.

The UWTV Overnight Delayed Startfeature gives you a 30-minute head start each day! By loading the washer and selecting the programmable delayed start cycle, your linens will be ready for the dryer immediately the next morning.

UWTV models can be programmed with the shortest wash cycles in the industry. When the four Fast-Fill Water Valves are combined withRapid Jetspray Rinse,Smart Drain, and our end-of-Cycle Rotation Sensor, you will cut laundry operating time. Saving time will save labor costs.

Utility-CostSavings

Utility costs account for approximately 10% of your laundry dollar. By selecting laundry equipment with advanced features, utility costs can be controlled. If a typical laundry facility processes around 4,000 cycles per year, even small savings per cycle will really add up. UniMac’s UWTV series has the solution for controlling your utility costs:

Electricity

Save 40% or more with our state-of-the-art

Frequency Drive System. It saves money by graduallyand efficiently ramping up to extraction speed. You’ll also save electricity with our industry-leading short cycle tim created with our Rapid Jetspray Rinse, fo Fast-Fill Water Valves and Smart Drains.

Gas

Dryer time is shorter due to 300 G-Forcesuper-highextraction speeds. By operating your dryer less each day, you reduce yourcost of energy by $100’s per year.

Water

Large wash capacity and UniLinc’s30 programmable water levels can save thousands of gallons of water annually. These savings can be as much as 10% versus competitors’ models. Our special water management leak detection system wil assist in further reducing water use.

Conserve. Save. Green.

Long before “being green” be-

came trendy, UniMac was marketing energy and water saving products for the commercial laun-

dry industry. Today, we’ve taken our green story further with the cutting-edgeUniLincTM control forwasher-extrac-tors. This control, combined with the otherenergy-savingfeatures on our washers, can help laundries make tremendous strides toward energy and water conservation. Add a highly efficient hot water heater andfast-dryingUniMac tumbler, and your facility has all the pieces in place for aneco-friendlylaundry.

Value For YourMoney

Often the lowest-pricedlaundry equipment ends up being the most expensive to own in terms of maintenance, performance andease-of-use.One way of measuring awasher-ex-tractor’s value is to take a look atstandard features.

Important standard features include:

Temperature Controlled Fill

Programmable Drive

Overflow Rinse

System

Two Wash Speeds

Brass Fill Valves

(TV Models)

 

Polypropylene Chemical

Laundry Operation

Supply Dispenser

Reports

Proven Perform-

ance

You want your decision to be a las ing one, so choose a washer-extractor that is durable and virtuallymaintenance-free,with a proven performance history.

You won’t find another washerextractor with the durability and

performance record of UniMac’s UWTV series.

Our heavy-dutyGamma A-frame,made of4" H-beam,has been the industry model of strength and durability. Our low maintenanceV-Belt Drive provides highefficiency, dependability and smooth operation, without unnecessary transmissions or clutches. With fewer moving parts, our drive system requires less maintenance.

UniMac’s expertise is the result of over 60 years as the leader in technological innovation. We’ve led the industry in developing technologically advanced solutions, such as

Microprocessor Controls, Frequency Drive System, Rapid Jetspray Rinse, Super-highG-Forceand two wash speeds.

We receive high marks from our customers and peers within the commercial laundry industry, and most agree: UniMac is the industry leader because we’ve set the standards for quality with products guaranteed to lower costs and constructed to perform every time!

Warranty

Our warranty is your insurance policy. We demonstrate our confidence in our UWTV by giving you the best warranty in the industry. UniMac provides a five-year warranty on the frame, basket, shaft, bearings and seals if failure or breakage should occur during normal operation due to defects in material or workmanship. A fullthree-yearwarranty also is is-

sued to the original purchaser on all other parts.

Specifications

 

 

 

UW35

 

UW60

 

UW80

UW100

UW125

UW150

 

 

 

 

 

 

 

 

 

 

Control Options

 

UniLinc™

 

UniLinc™

 

UniLinc™

UniLinc™

UniLinc™

UniLinc™

 

 

 

 

 

 

 

 

 

 

Capacity - lb (kg)

 

35 (16)

 

60 (27)

 

80 (36)

100 (45)

125 (57)

150 (68)

 

 

 

 

 

 

 

 

 

Cylinder Diameter -

26 1/4" (667)

 

32" (813)

 

36" (914)

36" (914)

42" (1067)

43" (1093)

in (mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cylinder Depthin(mm)

18 3/8" (467)

 

20" (508)

 

21" (533)

27" (686)

24" (610)

27 13/16" (706)

 

 

 

 

 

 

 

 

 

 

Cylinder Volume -

 

5.76 (163)

 

9.31 (264)

 

12.4 (350)

15.9 (450)

19.24 (544)

23.38 (662)

cu. ft. (liters)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Height - in (mm)

 

55 1/2" (1410)

 

64 1/2" (1638)

 

68 1/2" (1740)

68 1/2" (1740)

72" (1829)

79" (2007)

 

 

 

 

 

 

 

 

 

 

Width - in (mm)

 

32 1/2" (826)

 

36 5/8" (930)

 

411/2"(1054)

41 1/2"(1054)

48" (1219)

50" (1270)

 

 

 

 

 

 

 

 

 

 

Depth - in (mm)

 

38 1/4" (972)

 

45" (1143)

 

51 1/2" (1308)

541/2"(1384)

58" (1473)

63" (1600)

 

 

 

 

 

 

 

 

 

Door Opening Size -

14 3/8" (364)

 

17 1/2" (445)

 

17 1/2" (445)

17 1/2" (445)

20" (508)

24 3/4" (629)

in (mm)

 

 

 

 

 

 

 

 

 

 

Door Bottom To Floor -

23 3/4" (603)

 

28 1/4" (718)

 

29" (737)

29" (737)

29" (737)

32" (813)

in (mm)

 

 

 

 

 

 

 

 

 

 

Motor Size - HP (kW)

3 (2.2)

 

5 (3.7)

 

7.5(5.6)

7.5(5.6)

10 (7.5)

10 (7.5)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V Sp

L Sp

M Sp

V Sp

V Sp

V Sp

V Sp

V Sp

 

 

 

 

 

 

 

 

 

 

Total # of Speeds

 

8

5

6

8

8

8

8

8

 

 

 

 

 

 

 

 

 

 

 

Gentle

26 (.25)

26 (.31)

26 (.31)

26 (.31)

26 (.35)

26 (.35)

26 (.40)

23 (.32)

 

 

 

 

 

 

 

 

 

 

 

 

 

Wash

44 (.73)

40 (.73)

40 (.73)

40 (.73)

40 (.80)

40 (.80)

37 (.80)

36 (.80)

 

 

 

 

 

 

 

 

 

 

 

Distribution

83 (2.55)

71 (2.3)

71 (2.3)

71 (2.3)

70 (2.5)

70 (2.5)

62 (2.3)

61 (2.3)

Cylinder

 

 

 

 

 

 

 

 

 

 

Very Low

401 (60)

364 (60)

364 (60)

364 (60)

343 (60)

343 (60)

317 (60)

314 (60)

Speed -

 

 

 

 

 

 

 

 

 

 

 

Low

568 (120)

470 (100)

514 (120)

514 (120)

485 (120)

485 (120)

449 (120)

444 (120)

RPM (G-Force)

 

 

 

 

 

 

 

 

 

 

Medium

695 (180)

630 (180)

630 (180)

594 (180)

594 (180)

550 (180)

543 (180)

 

 

 

 

 

 

 

 

 

 

 

 

 

High

803 (240)

727 (240)

686 (240)

686 (240)

565 (190)

627 (240)

 

 

 

 

 

 

 

 

 

 

 

Very High

898 (300)

813 (300)

766 (300)

766 (300)

579 (200)

701 (300)

 

 

 

 

 

 

 

 

 

 

Drain Diameter -

 

1 @ 2 3/8" (60)

 

1 @ 3" (76)

 

2 @ 3" (76)

2 @ 3" (76)

2 @ 3" (76)

2 @ 3" (76)

in (mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Steam Connection -

1/2" (13)

 

1/2" (13)

 

1/2" (13)

1/2" (13)

3/4" (19)

3/4" (19)

in (mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water Inlet Connection-

4 @ 3/4" (19)

 

4 @ 3/4" (19)

 

4 @ 3/4" (19)

4 @ 3/4" (19)

2 @ 3/4"(19)

2 @ 3/4"(19)

in (mm)

 

 

 

 

 

 

 

 

2 @ 1"(25)

2 @ 1"(25)

 

 

 

 

 

 

 

 

 

Net Weight - lb (kg)

1030 (468)

 

1300 (785)

 

1730 (785)

1770 (805)

2420 (1100)

2970 (1347)

 

 

 

 

 

 

 

 

 

Agency Approvals*

cETLus, CE

 

cETLus, CE

 

cETLus, CE

cETLus, CE

cETLus, CE

cETLus, CE

*Agency approvals may vary depending on configuration.

Consult factory for details. Standard domestic voltage 208-240/60/3.230V/50Hz/1&3 phase and 380V/50Hz/3 phase units are available. All CE approved models available in50-cycle.Contact your distributor for specificmodelsavailable with CE. For electrical specifications,circuitbreakerrequirementsand full load amperages, see your authorized UniMac distributor. Manufacturer strongly recommends using a circuit breaker instead of fuses. Use3-polecircuit breakers for3-phasemachines.

For the most accurate information, the installationguide shouldbe used for all design and construction purposes. Due to continuous product improvements, design and specifications subject to change without notice. The quality managementsystems at all Alliance Laundry Systems’ Ripon facility has been registered to ISO 9001:2000.

©Copyright 2009 Alliance Laundry Systems LLC

Printed in the U.S.A.

www.unimac.com

Alliance Laundry Systems

Shepard Street, Ripon, WI 54971 Telephone: 1-800-587-5458

®

AU09-203