Uniflame Gbc1030wrs, Gbc1030w Owner's Manual

Loading...

OWNER’S MANUAL

Outdoor LP Gas Barbecue Grill

Model No. GBC1030W, GBC1030WRS

WARNING

FOR YOUR SAFETY:

For Outdoor Use Only

(outside any enclosure)

WARNING

FOR YOUR SAFETY:

1.Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage.

2.Read the installation, operation and maintenance instructions thoroughly before installing or servicing this equipment.

3.Failure to follow these instructions could result in fire or explosion, which could cause property damage, personal injury or death.

Save these instructions for future reference.

If you are assembling this unit for someone else, give this manual to him or her to read and save for future reference.

Made from 70% Bagasse

(Environmentally Friendly Sugar

Cane Pulp By-product)

Table of Contents

 

Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Page 2

Exploded View & Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . 3

Assembly Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 4

Installling LP Gas Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 8

Insert LP Gas Tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 8

Secure LP Gas Tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 8

Connect LP Gas Tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 8

Disconnect LP Gas Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 8

Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 8

Checking for Leaks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 8

Operating Main Burners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 8

Operating Side Burner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 9

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . 10

Product Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . 10

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . 10

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . 11

The use and installation of this product must conform to local codes. In absence

of local codes, use the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas

and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code,

B149.2.

 

California Proposition 65: Combustion by-products produced when using this product

contain chemicals known to the State of California to cause cancer, birth defects, and

other reproductive harm.

 

California Proposition 65: This product contains chemicals, including lead and lead

compounds, known to the State of California to cause cancer, birth defects or other

reproductive harm.

 

California Proposition 65: Wash your hands after handling this product.

 

Manufactured in China for: Blue Rhino Global Sourcing, Inc

Winston-Salem, NC USA • 1.800.762.1142, www.bluerhino.com

© 2010 Blue Rhino Global Sourcing, Inc. All Rights Reserved

 

UniFlame® is a Registered Trademark of Blue Rhino Global Sourcing, Inc.. All Rights Reserved.

GBC1030W_WRS-OM-102 ES

Outdoor LP Gas Barbecue Grill Model No. GBC1030W, GBC1030WRS

DANGER

If you smell gas -

1.Shut off gas to appliance.

2.Extinguish any open flame.

3.Open lid.

4.If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.

WARNING

FOR YOUR SAFETY

1.Do not store or use gasoline or other flammable liquids or vapors in the vincinity of this or any other appliance.

2.An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

DANGER: Failure to follow the dangers, warning and cautions in this manual may result in serious bodily injury or death, or in a fire or an explosion causing damage to property.

WARNING:

This grill is for outdoor use only, and shall not be used in a building, garage or any other enclosed area.

Do NOT operate, light or use this appliance within 8 feet of walls, structures or buildings.

For residential use only. This grill is NOT for commercial use.

This grill is safety certified for use in the United States and/or Canada only. Do not modify for use in any other location. Modification will result in a safety hazard.

This grill is for use with liquid propane (LP) gas only. The conversion to or attempted use of natural gas in this LP gas grill is dangerous and will void your warranty.

LP gas Characteristics:

a.LP gas is flammable and hazardous if handled improperly. Become aware of the characteristics before using any LP gas product.

b.LP gas is explosive under pressure, heavier than air and settles and pools in low areas.

c.LP gas in its natural state has no odor. For your safety, an odorant is added that smells like rotten cabbage.

d.Contact with LP gas can cause freeze burns to skin.

LP gas tank needed to operate. Only tanks marked “propane” may be used.

The LP gas supply tank must be constructed and marked in accordance with the

Specifications for LP gas Cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods; and Commission.

LP gas tank must be arranged for vapor withdrawal.

The LP gas tank must have a listed overfilling prevention device (OPD).

Only use LP gas cylinders equipped with a cylinder connection device compatible with the connection for outdoor cooking appliances.

The LP gas tank must have a tank collar to protect the tank valve. Never use an LP gas tank with a damaged body, valve, collar, or footing.

Dented or rusted LP gas tanks may be hazardous and should be checked by your LP gas supplier prior to use.

The LP gas tank should not be dropped or handled roughly.

Tanks must be stored outdoors out of the reach of children and must not be stored in a building, garage or any other enclosed area. Your tank must never be stored where temperatures can reach over 125°F.

Do not insert any tool or foreign object into the valve outlet or safety relief valve. You may damage the valve and cause a leak. Leaking propane may result in explosion, fire, severe personal injury or death.

Do not block holes in sides or back of grill.

Never keep a filled LP gas tank in a hot car or car trunk. Heat will cause the gas pressure to increase, which may open the relief valve and allow gas to escape.

Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

Disconnect cylinder when not in use.

Do not store a spare LP gas tank under or near this appliance. Never fill the tank beyond 80 percent full.

A fire causing, serious injury or damage to property may occur if the above is not followed exactly.

Never attempt to attach this grill to the self-contained LP gas system of a camper trailer, motor home or house.

The use of alcohol, prescription or non-prescription drugs may impair the consumer’s ability to properly assemble or safely operate the appliance.

Strong odors, colds, sinus congestion, etc. may prevent the detection of propane. Use caution and common sense when testing for leaks.

Never use charcoal, lighter fluid, lava rocks, gasoline, kerosene or alcohol with this product.

Your grill has been checked at all factory connections for leaks. Recheck all connections as described in the “Operating Instructions” section of the manual, as movement in shipping can loosen connections.

Check for leaks even if your unit was assembled for you by someone else.

Do not operate if gas leak is present. Gas leaks may cause a fire or explosion.

You must follow all leak-checking procedures before operating. To prevent fire or explosion hazard when testing for a leak:

a.Always perform leak test before lighting the grill and each time the tank is connected for use.

b.No smoking. Do not use or permit sources of ignition in the area while conducting a leak test.

c.Conduct the leak test outdoors in a well-ventilated area.

d.Do not use matches, lighters or a flame to check for leaks.

e.Do not use grill until any and all leaks are corrected.

If you are unable to stop a leak, disconnect the LP gas supply. Call a gas appliance serviceman or your local LP gas supplier.

Do not store or use gasoline or other flammable liquids or vapors within 25 feet (7.62 m) of this appliance.

Do not use in an explosive atmosphere. Keep grill area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

Minimum clearance from sides and back of unit to combustible construction, 36 inches from side and 36 inches from back. Do not use this appliance under overhead combustible surfaces.

It is essential to keep the grill’s valve compartment, burners, and circulating air passages clean. Inspect grill before each use.

Do not alter grill in any manner. Any alteration will void your warranty.

Do not use the grill unless it is COMPLETELY assembled and all parts are securely fastened and tightened.

Do not build this model of grill in any built-in or slide in construction. Ignoring this warning could cause a fire or an explosion that can damage property and cause serious bodily injury or death.

This grill should be thoroughly cleaned and inspected on a regular basis. Clean and inspect the hose before each use of the appliance. If there is evidence of abrasion, wear, cuts or leaks, the hose must be replaced prior to the appliance being put into operation.

Use only the regulator and hose assembly provided. The replacement regulator and hose assembly shall be that specified by the manufacturer.

Use only Blue Rhino Global Sourcing, Inc. factory authorized parts. The use of any part that is not factory authorized can be dangerous. This will also void your warranty.

Do not use this appliance without reading “Operating Instructions” in this manual.

Do not touch metal parts of grill until it has completely cooled (about 45 min.) to avoid burns, unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc.).

When cooking, fire extinguishing materials shall be readily accessible. In the event of an oil/grease fire, do not attempt to extinguish with water. Use type BC dry chemical fire extinguisher or smother with dirt, sand or baking soda.

Do not install or use in or on boats or recreational vehicles. Do not use grill in high winds.

Never lean over the grill when lighting.

Do not leave a lit grill unattended, especially keep children and pets away from grill at all times.

Do not attempt to move grill when in use. Allow the grill to cool before moving or storing.

LP gas tank must be properly disconnected and removed prior to moving this grill.

Storage of grill indoors is permissible only if the tank is disconnected, removed from the grill and properly stored outdoors.

Always open grill lid carefully and slowly as heat and steam trapped within grill can severely burn you.

Do not attempt to disconnect the gas regulator from the tank or any gas fitting while the grill is in use.

Always place your grill on a hard, non-combustible, level surface. An asphalt or blacktop surface may not be acceptable for this purpose.

Move gas hoses as far away as possible from hot surfaces and dripping hot grease. Keep all electrical cords away from a hot grill.

All electrical accessories (such as rotisserie) must be electrically grounded in accordance with local codes, or National Electrical Code, ANSI / NFPA 70 or Canadian Electrical Code, CSA C22.1. Keep any electrical cords and/or fuel supply hoses away from any hot surfaces.

Do not use grill for indoor cooking or heating. TOXIC fumes can accumulate and cause asphyxiation.

After a period of storage and/or nonuse, check for leaks, burner obstructions and inspect for any abrasion, wear or cuts to the hose.

Failure to open lid while igniting the grill’s burners, or not waiting 5 minutes to allow the gas to clear if the grill does not light, may result in an explosive flame-up.

If grill is not in use, the gas must be turned off at the supply tank. Never operate grill without heat plates installed.

Always use a meat thermometer to ensure food is cooked to a safe temperature. Use protective gloves when assembling this product.

Do not force parts together as this can result in personal injury or damage to the product.

Never cover entire cooking area with aluminum foil.

Deaths, serious injury or damage to property may occur if the above is not followed exactly.

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

page no.

3

For great recipes and tips, visit recipes.uniflame.com

 

 

 

Parts List

1

Lid Handle

55-10-039

 

 

 

2

Temperature Gauge

55-10-040

 

 

 

3

Lid Handle Side (2)*

55-10-041

 

 

 

4

Cooking Grid (3)

55-10-042

 

 

 

5

Warming Rack

55-10-043

 

 

 

6

Lid

55-10-044

55-10-070 (WRS)

 

 

 

 

 

7

Heat Plate (3)

55-10-045

 

 

 

8

Grill Body

55-10-046

 

 

 

9

Side Burner Grid

55-10-047

 

 

 

10

Burner (3)*

55-10-048

 

 

 

11

Right Side Shelf

55-10-049

Assembly

 

 

 

 

 

12

Left Side Shelf

55-10-050

Assembly

 

 

13

Main Control Knob

55-10-051

Bezel (3)*

 

 

14

Side Burner

55-10-052

 

 

 

15

Side Burner Control

55-08-132

Knob Bezel*

 

 

 

 

 

16

Side Burner Control

55-09-398

Knob

 

 

 

 

 

17

Right Side Shelf Front*

55-10-053

 

 

 

18

Left Side Shelf Front*

55-10-054

 

 

 

19

Igniter Button*

55-07-387

 

 

 

20

Main Burner Control

55-10-055

Knob (3)

 

 

 

 

 

21

Regulator/Hose

55-08-128

Assembly*

 

 

 

 

 

22

Grease Cup Support

55-07-379

 

 

 

23

Grease Cup

55-08-130

 

 

 

24

Lighing Rod*

55-07-520

 

 

 

25

Left Cart Frame

55-10-057

 

 

 

26

Rear Panel

55-10-058

55-10-345 (WRS)

 

 

 

 

 

27

Right Cart Frame

55-10-059

 

 

 

28

LP Gas Tank Heat Plate

55-10-060

 

 

 

29

Upper Front Cart Panel

55-10-061

55-10-071 (WRS)

 

 

 

 

 

30

LP Gas Tank Retainer

55-10-062

Wire

 

 

31

Hub Cap (2)

55-15-170

 

 

 

32

Wheel (2)

55-15-211

 

 

 

33

Axle

55-10-063

 

 

 

34

Cart Frame Support

55-10-064

Wire (2)

 

 

 

 

 

35

Lower Front Cart Panel

55-10-065

 

 

 

36

Foot

55-10-066

* Pre assembled

Exploded View

4

3

1

 

3

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

5

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

9

12

13

 

10

 

11

 

 

 

 

 

 

 

 

18

 

 

 

21

 

15

14

 

 

 

 

 

 

 

 

20

19

 

24

17

16

 

 

 

 

 

 

 

 

 

26

 

22

23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

 

 

 

27

28

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30

31

 

29

 

 

 

 

 

 

32

36

33

34

35

32

 

31

Hardware

 

A

Screw

M4x10 Nickel Plated Phillips Truss Head

4 pcs

 

 

 

 

 

 

 

 

 

 

B

Screw

M6x16 Nickel Plated Phillips Truss Head

25 pcs

 

 

 

 

 

 

 

 

 

 

C

Screw

M6x25 Nickel Plated Phillips Truss Head

4 pcs

 

 

 

 

 

 

 

 

 

 

D

Nut

M10 Nickel Plated Hex

2 pcs

 

 

 

 

 

 

 

 

 

 

E

Wing Nut

M5 Nickel Plated

2 pcs

 

 

 

 

 

 

 

 

 

 

F

Wing Nut

M6 Nickel Plated

4 pcs

 

 

 

 

 

 

 

 

 

 

G

Washer

ø6.4 Nickel Plated

6 pcs

 

 

 

 

 

 

 

 

 

 

H

Lock Washer

ø6.4 Nickel Plated

6 pcs

 

 

 

 

 

 

 

 

 

 

I

Rubber Spacer

 

2 pcs

 

J

AA Battery

 

1 pc

 

 

Tools Required for Assembly (Included)

 

 

#2 Phillips Head Screwdriver

 

1 pc

M10-M6 Wrench

2 pcs

Outdoor LP Gas Barbecue Grill Model No. GBC1030W, GBC1030WRS

Assembly Instructions

1

DO NOT RETURN PRODUCT TO STORE.

2

Attach Foot

For assistance call 1.800.762.1142 toll free. Please have

 

your owner’s manual and model number available for

 

reference.

Note: The model number can be found on the back of the cart assembly.

For Easiest Assembly:

To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings.

Clear an area large enough to layout all components and hardware.

When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware.

Follow all steps in order to properly assemble your product.

To complete assembly you will need:

(1) Leak Detection Solution (Instructions on how to make solution are included in the “Operating Instructions” section of this manual)

(1) Precision Filled LP Gas Grill Tank with Acme Type 1 external threaded valve connection (4-5 gallon size)

Typical assembly: approximately 1 (one) hour.

 

 

 

 

 

3

Caps

4

Assemble Cart

 

Attach LP Gas Tank Retainer Wire, Axle, Wheels and Hub

 

D

F

x 2

I

x 2

 

 

 

 

x 1

B

x 13

F

x 1

 

 

Uniflame Gbc1030wrs, Gbc1030w Owner's Manual

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

page no.

5

 

For great recipes and tips, visit recipes.uniflame.com

 

 

 

 

 

 

 

 

 

 

 

5

Attach Cart Frame Support Wires

6

Attach Lid Handle, Temperature Gauge and Main Burner

 

Control Knobs

F

x 2

H

x 2

 

 

 

B

x 2

E

x 2

G

x 2

 

 

 

 

7 Attach Grill Body Assembly

 

8 Attach Left Side Shelf Assembly

B

G

x 4

x 4

H

x 4

B

x 2

C

x 2

 

 

 

Outdoor LP Gas Barbecue Grill Model No. GBC1030W, GBC1030WRS

Assembly Instructions (continued)

9

Attach Right Side Shelf Assembly

10

Attach Side Burner Control Knob Bezel and Side Burner

 

Control Knob

B

x 2

C

x 2

A

x 2

 

 

 

 

 

 

 

 

 

 

11 Attach Side Burner, Igniter Wire and Side Burner Grid

12 Insert Heat Plates and Cooking Grids

A x 2

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

page no.

7

 

For great recipes and tips, visit recipes.uniflame.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13 Insert Warming Rack

 

14 Attach LP Gas Tank Heat Plate

B

x 2

15

Insert Battery

16

Insert Grease Cup Support and Grease Cup

Note: Remove protective film from battery before inserting.

 

J

 

 

x 1

 

 

Outdoor LP Gas Barbecue Grill Model No. GBC1030W, GBC1030WRS

Installing LP Gas Tank

To operate you will need (1) precision-filled standard grill LP gas tank (20#) with external valve threads.

Note: An empty standard grill LP gas tank weighs approximately 18 lbs. A precision-filled standard grill LP gas tank should weigh no more than 38 lbs.

Caution: LP gas tank must be properly disconnected and removed prior to moving this grill.

Insert LP Gas Tank

Place precision filled LP gas tank upright into the notches in the right cart frame so the tank valve is facing the gas line connection.

Secure LP Gas Tank

Secure tank by sliding tank retainer wire over shoulder of LP gas tank.

Connect LP Gas Tank

Before connecting, be sure that there is no debris caught in the head of the LP gas tank, head of the regulator valve or in the head of the burner and burner ports.

Connect gas line to tank by turning knob clockwise until it stops.

Disconnect LP Gas Tank

Before disconnecting make sure the LP gas tank valve is “CLOSED”.

Disconnect gas line from LP gas tank by turning knob counterclockwise until it is loose.

Caution: LP gas tank must be properly disconnected and removed prior to moving this grill.

Need a tank of gas? Try tank exchange service. It’s easy, fast, safe, and available at tens of thousands of conveniently located retail outlets

nationwide. You can purchase a new full tank or exchange your empty for a precision filled one.

Operating Instructions

Checking for Leaks

Burner Connections

1.Make sure the regulator valve and hose connections are securely fastened to the burner and the tank. (Figures 1 and 2)

If your unit was assembled for you, visually check the connection between the burner venturi pipe and orifice. Make sure the burner venturi pipe fits over the orifice.

WARNING: Failure to inspect this connection or follow these instructions could cause a fire or an explosion which can cause death, serious bodily injury, or damage to property.

2.Please refer to diagram for proper installation. (Figures 1 and 2)

3.If the burner pipe does not rest flush to the orifice, please contact 1.800.762.1142 for assistance.

Tank/Gas Line Connection

1.Make 2-3 oz. of leak solution by mixing one part liquid dishwashing soap with three parts water.

2.Make sure control knobs are (OFF) position. (Figure 3)

3.Turn LP gas tank valve to “OPEN”.

4.Spoon leak check solution at all “X” locations (Figures 1, 2 and 4)

a.If any bubbles appear turn LP gas tank valve to “CLOSED”, reconnect and re-test.

b.If you continue to see bubbles after several attempts, turn LP gas tank valve to “CLOSED” and disconnect LP gas tank and contact 1.800.762.1142 for assistance.

c.If no bubbles appear after one minute turn LP gas tank valve to “CLOSED”, wipe away solution and proceed.

 

Figure 1

LP Gas Valve

Burner

Connection

venturi

 

pipe

 

X

 

 

LP Gas

 

Main Burners

Valve with

 

Orifice

 

 

 

Figure 2

 

LP Gas Valve

 

LP Gas

with Orifice

 

Connection

X

Burner

Side Burner venturi pipe

Figure 3

Operating Main Burners

First Use

1.Make sure all labels, packaging and protective films have been removed from the grill.

2.Remove manufacturing oils before cooking on this grill for the first time by operating the grill for at least 15 minutes on (HIGH) with the lid closed. This will “heat clean” the internal parts and dissipate odors.

Lighting

1.Open lid. Attempting to light the burner with the lid closed may cause an explosion!

2.Make sure there are no obstructions of airflow to the burners. Spiders and insects can nest within and clog the burner / venturi tube at the orifice. A clogged burner tube can lead to a fire beneath the appliance.

3.All control knobs must be in the (OFF) position. (Figure 3)

4.Turn LP gas tank valve to “OPEN”.

5.Select burner to light. Push and turn control knob to (HIGH).

6.Press the (electronic igniter) button and hold for up to 5 seconds to light burner.

7.If ignition does not occur in 5 seconds, turn burner control knob (OFF), wait 5 minutes and repeat lighting procedure.

8.If igniter does not light burner, use a lit match secured with the lighting rod provided to light burners manually. Access the burners through the cooking grid and heat plates. Position the lit match near side of the burner. (Figure 5)

Important: Always use the lighting rod provided when lighting burners with a match.

9.After lighting, observe the burner flame, make sure all burner ports are lit and flame height matches illustration. (Figure 6)

Note: Each burner lights independently - repeat steps 5-9 for the other burners.

Figure 4

X

X

X

X

X

Figure 5

Figure 6

Flame Slight

Yellow

Slight

Blue

Burner

Dark

Blue

Caution: If burner flame goes out during operation, immediately turn the gas “OFF” and open lid to let the gas clear for about 5 minutes before re-lighting.

+ 16 hidden pages