Uniden DECT1580 User Manual

0 (0)

UNIDEN

CORDLESS

TELEPHONES

DECT1580 Series

Table of Contents

 

Welcome.......................................................................

5

Accessibility...............................................................

5

Installing the Phone.....................................................

6

Choosing the Best Location.......................................

6

Installing the Battery..................................................

7

Connecting the AC adapter........................................

8

To the base............................................................

8

To the charging cradle .

 

(for multi-handset packs only).......................

8

Charging the Handset................................................

9

Connecting to the Phone Line.................................

10

Testing the Connection............................................

11

Changing the dial mode......................................

12

Expanding Your Phone............................................

13

Adding accessory handsets................................

13

Registering accessory handsets.........................

13

Using Multiple Bases...............................................

14

Registering the handset to another base............

14

Selecting the base...............................................

15

Getting to Know Your New Phone............................

16

Features...................................................................

16

Answering system features.................................

16

Terminology Used in this Manual.............................

17

Manual Conventions................................................

17

Parts of the Handset................................................

18

Parts of the Base.....................................................

19

Using the Interface.....................................................

20

Reading the Display.................................................

20

Using the Four-way Function Key............................

21

Using the Handset Menu.........................................

21

Entering Text from Your Handset.............................

22

Basic Setup.................................................................

23

Selecting a Language..............................................

23

Setting the Day & Time............................................

23

Activating Personal Ring..........................................

24

Activating the Key Touch Tone.................................

24

Setting Up the Phonebook........................................

25

Creating Phonebook Entries....................................

25

Finding a Phonebook Entry.....................................

26

Editing an Existing Phonebook Entry.......................

26

Storing Caller ID or Redial Numbers .

 

in the Phonebook........................................

27

Deleting a Single Phonebook Entry.........................

27

Deleting all Phonebook Entries................................

28

Copying Phonebook Entries to Another Handset....

28

Customizing Your Handsets.....................................

29

Changing the Handset Banner................................

29

Selecting a Ring Tone..............................................

29

Activating AutoTalk...................................................

30

Activating Any Key Answer......................................

30

Using Your Phone......................................................

31

Making a Call from the Phonebook..........................

32

Chain dialing from the phonebook.......................

32

Switching to the Handset Speakerphone .

 

During a Call................................................

32

Using Caller ID, Call Waiting, and Redial Lists.......

33

Using the Caller ID List ...........................................

33

Making a Call from a Caller ID Record....................

33

Seven-digit dialing...............................................

34

Deleting Caller ID Numbers.....................................

34

Using Call Waiting....................................................

35

Redialing a Number.................................................

35

Deleting a Redial Record.........................................

35

Adjusting the Ringer, Earpiece and

 

Speaker Volume..............................................

36

Adjusting the Ringer Volume...................................

36

Muting the Ringer (One call only)............................

36

Adjusting the Earpiece Volume................................

36

Adjusting the Speaker Volume.................................

36

Adjusting the Audio Tone.........................................

37

Activating T-Coil Mode.............................................

37

Finding a Lost Handset.............................................

38

Using Hold, Conference and Transfer......................

38

Placing a Call on Hold.............................................

38

Conferencing...........................................................

38

Transferring a Call...................................................

39

Answering a transferred call................................

39

Using Special Features..............................................

40

Privacy Mode...........................................................

40

Using the Intercom...................................................

40

Making an intercom page....................................

40

Answering an intercom page...............................

41

Muting the Microphone............................................

41

Tone Dialing Switch Over.........................................

41

Using a Voice Mail Service......................................

42

Resetting the voice message waiting indicator...

42

Setting Up the Answering System............................

43

Recording a Personal Greeting...............................

43

Selecting a Greeting............................................

43

Deleting Your Personal Greeting.........................

44

Selecting the Language for Announcements...........

44

Setting the Number of Rings....................................

45

Setting the Record Time (or Announce only)...........

45

Activating the Message Alert...................................

46

Activating the Base Call Screen..............................

46

Using the Answering System....................................

47

Turning Your Answering System On and Off...........

47

Remote Operation from the Handset.......................

48

Reviewing Messages...............................................

49

Screening Calls........................................................

50

Turning Off the Message Alert Tone.........................

50

Operating the Answering System While .

 

You Are Away from Home............................

50

Setting a security code or .

 

Personal Identification Number (PIN)..........

50

Dialing in to your answering system....................

50

Wall Mounting the Base.............................................

52

Maintenance...............................................................

54

Specifications...........................................................

54

Battery Information..................................................

54

Battery life...........................................................

54

Low battery alert .................................................

55

Cleaning the charging contacts...........................

55

Battery replacement and handling ......................

55

Power Failures.........................................................

55

Troubleshooting.........................................................

56

Common Issues.......................................................

56

Weak or Hard to Hear Audio ...................................

59

Noise or Static on the Line.......................................

59

Installing a telephone line filter or DSL filter........

60

Resetting the Handset.............................................

60

Resetting the Handset Without the Base.................

61

Changing the Line Mode for Multiple Extensions....

62

Traveling Out of Range............................................

62

Liquid Damage.........................................................

63

Precautions! ..............................................................

64

Rechargeable Nickel-Cadmium Battery Warning ...

64

Rechargeable Nickel-Cadmium Batteries Must Be

 

Recycled or Disposed of Properly...............

64

Important Safety Instructions ..................................

65

The FCC Wants You To Know ................................

65

Radio interference ..............................................

67

Cordless telephone privacy.................................

67

I.C. Notice................................................................

67

Terminal equipment.............................................

67

Radio equipment.................................................

67

One Year Limited Warranty.......................................

68

Index ..........................................................................

69

Remote Operation Card.............................................

71

Welcome

Thank you for purchasing a Uniden Multi-Handset phone.

Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit.

As an Energy Star® Partner, Uniden has determined that this product or product models meets the Energy Star® guidelines for energy efficiency. Energy Star® is a U.S. registered mark.

Uniden is a registered trademark of Uniden America Corporation.

Accessibility

Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden’s products can accommodate persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314.

Our customer care hours as well as accessibility information can be found on our website, www.uniden.com, under the “Accessibility” link. If your call is received outside of our business hours, you can leave us a message and we will call you back.

Welcome

May be covered under one or more of the following U.S. patents:

 

 

 

 

5,491,745

5,533,010

5,574,727

5,581,598

5,650,790

5,660,269

5,663,981

5,671,248

5,717,312

5,732,355

5,754,407

5,758,289

5,768,345

5,787,356

5,794,152

5,801,466

5,825,161

5,864,619

5,893,034

5,912,968

5,915,227

5,929,598

5,930,720

5,960,358

5,987,330

6,044,281

6,070,082

6,076,052

6,125,277

6,253,088

6,314,278

6,321,068

6,418,209

6,618,015

6,714,630

6,782,098

6,788,920

6,788,953

6,839,550

6,889,184

6,901,271

6,907,094

6,914,940

6,940,867

6,953,118

7,023,176

7,030,819

7,146,160

7,203,307

7,206,403

7,310,398

 

 

 

 

 

Other patents pending.

Installing the Phone

Installing the Phone

Choosing the Best Location

When choosing a location for your new phone, here are some important guidelines you should consider:

PLACE YOUR BASE

 

TRY TO AVOID

Near an AC outlet and a telephone wall jack.

Microwave ovens

Refrigerators

TVs

Other

• Fluorescent

• Other cordless

lighting

telephones

• Personal computers

• Areas with

• Wireless LAN

a lot of

equipment

background

 

noise

 

 

• Dust

• Shock

 

 

• Excessive

 

 

• Vibration

In a centrally-located

• Direct sunlight

moisture

 

open area.

• Extreme temperatures

 

 

Notes: For maximum range:

Keep both the base and handset antennas free of obstruction.

When the handset is not in use, place the handset in an upright position.

Metal and reinforced concrete may affect cordless telephone performance.

Installing the Battery

Use only the Uniden BT-1015 rechargeable battery pack supplied with your cordless telephone.

Unpack all handsets,

Line up the red and black wires on

battery packs, and battery

the battery pack connector with the

covers. (If the battery cover

sticker in the handset’s battery

is on the handset, press in

compartment.

on the notch and slide the

 

cover off.)

 

 

RED

 

BLACK

Push the battery pack connector in firmly. (You should hear it click into place.) Gently tug on the battery wires to make sure the connection is secure.

Place the cover over the battery compartment and slide it up into place.

Phone the Installing

Installing the Phone

Connecting the AC adapter

To the base

To avoid risk of fire and shock, only use the Uniden PS-0009 AC adapter with the base.

Connect the AC adapter to the DC IN 9V jack

 

on the back of the base.

Connect the AC

 

 

adapter to a

 

standard 120V

 

AC wall outlet.

 

Don’t put any power cord where it people might

 

trip over it or step on it. If a power cord becomes

Route the cord through the

chafed or worn out, it can create a fire or

molded wiring channel.

electrical hazard.

To the DCX150 charging cradle (for multi-handset packs only)

Use only the Uniden PS-0007 AC adapter with the DCX150 charging cradle.

Connect the AC adapter to the

Connect the AC adapter

DC IN 9V jack as shown.

to a standard 120V AC

(It may already be connected.)

wall outlet.

Uniden DECT1580 User Manual

Charging the Handset

Place the handset in the base cradle with the display facing forward.

If you have an accessory handset, place it in the charging cradle with the display facing forward.

Make sure that the charge LED illuminates when the handset is seated.

Make sure that the charge LED illuminates when the handset is seated.

What if the charge LED doesn’t light up?

Reseat the handset; make sure the contacts on the bottom of the handset are lined up with the contacts in the charging cradle.

Check the AC adapter connection.

Make sure you are not using an outlet that’s controlled by a wall switch.

Charge your handset at least 15 to 20 hours before plugging into the phone line.

Phone the Installing

Connecting to the Phone Line

Make sure that the battery pack is fully charged.

Connect the telephone cord to the TEL LINE jack.

Installing the Phone

Do you have DSL or any high-speed Internet service delivered through your phone line?

Try putting a DSL filter between the base and the wall jack. Without a filter, telephone-line- based Internet services can interfere with standard phones.

Connect the telephone cord to a telephone wall jack.

lephone

What if Check TEL Line appears on the handset display?

The telephone cord may not be connected correctly. Check the telephone cord connection.

Telephone wall jack

DSL filter

10

Testing the Connection

Pick up the handset from the cradle and press TALK/FLASH. You should hear a dial tone, and the display should show Talk.

What if I can’t hear a dial tone?

Check the telephone cord connection on the base.

What if the display doesn’t show Talk?

• Check the battery pack connection in the handset.

• Make sure the battery pack is fully charged.

• Make sure the AC adapter cord is securely connected to the . DC IN 9V jack and a standard power outlet.

• Try resetting the handset (see page 60).

Make a quick test call, and then press END to hang up.

What if there is a lot of static?

Check the sources of interference described in Choosing the

Best Location (see page 6): is the base near any of those?

What if the call doesn’t go through?

Try changing the dialing mode (see the next section).

Note: Make sure you can get a dial tone on any accessory handsets that were packaged with your phone.

Phone the Installing

11

Installing the Phone

Changing the dial mode

Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most base networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your phone’s dial mode. If you don’t get a dial tone or can’t connect to the telephone network, please follow the steps below to modify your phone’s settings:

1) Press MENU/SELECT.

) Select the Global Setup menu, and then the Dial Mode submenu.

3)Scroll to highlight Pulse.

4)Press MENU/SELECT. You will hear a confirmation tone.

If you ever need to change the dial mode back to tone dialing, follow the same procedure, but select Tone in step 3.

NOW YOU ARE READY TO USE YOUR PHONE!

12

Expanding Your Phone

Adding accessory handsets

Your phone supports a total of six cordless handsets, including any that were supplied with your phone. You can now place a fully-featured cordless handset anywhere AC power is available to connect the charging cradle.

Your phone is compatible with the following Uniden DECT6.0 accessory handsets: DCX150, DCX200, and DCX300. (Please visit our website at www.uniden.com for the most up-to-date list of compatible handsets.)

If you purchase any accessory handsets separately, you must register the handsets to the base before you can use them. (Accessory handsets that come packaged with a base are already registered to that base.)

Registering accessory handsets

When charged, registered handsets display a handset ID number. Handsets that have not been registered display:

To register a DCX150 accessory handset:

1)Charge the handset completely. (See page 8 for instructions on connecting the charger and page 9 for instructions on charging the handset.)

) Place the handset in the base cradle for about thirty seconds. Handset Registering will appear in the LCD.

3)When the handset has registered to the base, the LCD will display Registration complete then show the handset ID number.

If the display shows Registration failed, repeat the process again.

To register a DCX200 or DCX300 accessory handset:

1)Charge the handset completely. (See the manual supplied with the accessory handset for instructions on connecting the charger and charging the handset.)

) Disconnect the base AC adapter. Then press and hold find while you reconnect the adapter. Keep holding find until the charge LED starts to blink.

Phone the Installing

13

Installing the Phone

3)On the handset, press and hold # until the handset beeps and displays Handset Registering.

4)When the handset has registered to the base, the LCD will display Registration complete then show the handset ID number.

If the display shows Registration failed, repeat the process again.

Note: If a handset has ever been registered to a base, reset the handset before you register it to a new base (see Resetting the Handset on page 60). Or to use multiple bases, see the next section.

Using Multiple Bases

The handsets supplied with your phone can be registered to a total of four different bases. Compatible bases include the DECT1500 series and the WXI2077 series. (See our website or contact Customer Service for an up-to-date list of compatible models.)

Note: To confirm how many bases the handset is registered to, open the Select Base submenu (follow the step 1 of Selecting the base on page 15). Press END to close the list and return to standby.

Registering the handset to another base

To register a handset to another base:

1) Make sure the handset battery is fully charged.) If the other base has an LCD display:

With the phone in standby, press MENU/SELECT on the base. Move the cursor to select the Register Handset menu, and then press MENU/SELECT. Handset Registering will appear.

If the other base does not have an LCD display:

Disconnect the base AC adapter. Then press and hold the Find Handset key* while you reconnect the adapter. Keep holding the Find Handset key until the charge LED starts to blink..

*This key might be labeled Find or Find HS.

3)On the handset, press MENU/SELECT. Select the Register Base menu. Handset Registering will appear in the display. (After step 2, you have thirty seconds to complete this step 3 before the system returns to standby.)

14

4)Wait approximately thirty seconds. Registration complete will be displayed to indicate the handset has been registered to the base and a handset ID will be automatically assigned. The handset assigns its own ID to this base, too. (Since the base ID is based on the order in which the handset was registered to the different bases, a base may have different IDs on each handset.)

If Registration failed appears in the LCD, please try these steps again.

Note: The handset will stay connected to the new base until you select a different base (see below).

Selecting the base

After you register your handset to more than one base, you can set the handset to automatically search for a new base if the base it’s currently connected is unavailable or out of range. You can also manually select which base you want the handset to connect to; for example, if you have one base with an answering machine, you can connect to that base to check messages from the handset.

1)With the phone in standby, press MENU/SELECT. Select the Handset Setup menu, and then the Select Base submenu.

) Move the cursor to select the base you want to connect to, or choose Auto to have the handset automatically search for and select base.

3)Press MENU/SELECT. Searching will appear in the display.

4)When the base is found, the handset will return to standby. If the base is not found, “Searching” continues to appear. You can repeat the procedure listed above to return back to the original connection or to find the different base.

Note: You cannot change bases during a call.

Phone the Installing

15

Getting to Know Your New Phone

Getting to Know Your New Phone

Features

• 1.9GHz DECT 6.0 expandable system

• Speakerphone on handset

• Expands up to 6 handsets

• 7 ringer options on handset (3 tones/4 melodies)

• Caller ID/Call Waiting with phonebook match

• Last 5 number redial

• Store 30 Caller ID numbers

• Trilingual menu displays (English, Spanish, or French)

• 70-number phonebook with alphabetical search

• Call transfer

• Personalized ring and display name by party

• Conferencing

• Transfer single listing or entire phonebook

• Intercom

Answering system features

• Digital tapeless recording

• Day and time announcement

• Up to 14 minutes of recording time

• Remote message retrieval

• Call screening

• Toll saver

• Personal or pre-recorded outgoing messages

• Message alert

• Bilingual voice prompts .

• Records up to 59 messages.

(for US models: English and Spanish, .

 

for Canadian models: English and French)

 

16

Terminology Used in this Manual

Accessory

Additional handsets that can register to the base, allowing you to add handsets without connecting another

Handsets

phone line. This base supports a total of six cordless handsets; see page 13 for compatible handsets.

Base

The main part of the phone that connects to your phone line and lets you make and receive calls.

Charging

A cradle that comes with an accessory handset and charges the handset battery pack.

cradle

It connects to power but does not connect to a phone line.

CID

Caller ID is available from your telephone provider and is offered to users on a subscription basis.

With this service, you will be able to see the incoming caller information such as name and phone number.

 

CID/CW

Caller ID with Call Waiting is available by subscription from your telephone provider.

With this service, you will be able to view incoming caller information while on a call with another user.

 

 

Any settings that apply to all registered handsets and the base.

Global

These features are available by selecting “Global Setup” or “Day & Time” in the handset menu. Only one

handset can change global settings at a time, and you have to make sure the phone is not currently being

Settings

used. If you have multiple bases, the different bases have each global settings; select the base before

 

 

changing the global setting (see Selecting the base on page 15).

Standby

The handset and the base are not in use. (It doesn’t matter whether the handset is in the cradle: the TALK/

FLASH or

 

hasn’t been pressed, and there is no dial tone.)

 

 

 

 

Talk

A dial tone has been enabled, so you can dial and carry on a conversation with an outside party.

Manual Conventions

This manual uses several different type styles to help you distinguish between different parts of the phone:

Bold italic text indicates a key or button on the phone

Italic text indicates text on the display, such as menu options, prompts, and confirmation messages

lower case bold text indicates a status light on the phone

ALL CAPITALS BOLD indicates a connection jack on the base or charging cradle

17

Phone New Your Know to Getting

Parts of the Handset

 

new message LED

 

 

Earpiece

 

 

Display (LCD)

 

 

CLEAR/INT'COM key

key (up)

 

 

 

(clear/intercom)

MENU/SELECT key

 

 

 

key (phonebook/left)

key (caller ID/right)

 

TALK/FLASH key

END key

 

key (down)

 

 

 

key (speaker)

 

 

 

Twelve-key dial pad

 

/TONE key

# key

Phone

REDIAL/PAUSE key

/MUTE key

Microphone

(messages/mute)

New

 

Charging contacts

to Know Your

 

 

 

Getting

 

18

 

 

Speakerphone

speaker and ringer

Battery compartment

Parts of the Base

Speaker

 

 

 

 

 

key (delete)

FIND key

message counter LED

 

key (skip)

 

ANSWER

 

VOLUME

key

ON/OFF key

 

(volume up)

Charging contacts

charge LED

VOLUME key (volume down)

key (play/stop) key (repeat)

19

Phone New Your Know to Getting

Using the Interface

Using the Interface

Reading the Display

In standby

 

Time

 

During a call

 

 

 

 

 

 

 

 

 

Handset ID and banner

1(( #

 

6CNM 2

*CPFUGV

 

Call duration

Number of new

0GY %+&

 

 

 

 

 

Caller ID calls received

 

 

 

 

 

 

 

 

The ringer off icon indicates that the ringer is turned off.

The voice mail icon appears when you have messages waiting in your voice mailbox.

The privacy icon appears when the Privacy Mode is turned on.

The speaker icon appears when the speaker phone is in use.

The T-coil icon appears when the T-coil Mode is turned on.

The mute icon appears while the microphone is muted.

The battery icon indicates the handset battery status: full, medium, low, and empty.

20

Using the Four-way Function Key

Your handset has a four-way function key that allows you to move the cursor on the display and access the most commonly used features at the touch of a button.

Press the left side of the key to open the phonebook.

Press the right side of the key to open the Caller ID list.

Press the top of the key to increase the ringer volume (while the phone is in standby) or speaker volume (while you are on a call).

Press the bottom of the key to decrease the ringer volume (while the phone is in standby) or speaker volume (while you are on a call).

Using the Handset Menu

Increase the volume

Open the

Open the

phonebook

Caller ID list

Four-way

 

Function Key

 

 

Decrease the volume

To open the menu, press the Menu/Select key.

The arrow cursor on the left side of the line shows which menu item is currently highlighted. Use on the fourway function key to move the cursor up and to move the cursor down.

To select the highlighted option, press Menu/Select.

To go back to the previous screen, press left on the four-way function key.

To exit the menu, press END.

If you don’t press any keys for thirty seconds, the phone will time out and exit the menu. (When setting the day and time, the time-out period is extended to two minutes.)

For Ans. Setup, Global Setup and Day & Time menu options, make sure the line is not in use and the handsets are within range of the base.

Interface the Using

21

Using the Interface

Entering Text from Your Handset

You can use the number keypad on your handset to enter text by referring to the letters printed on each number key.

When you press the number key in a text entry field, the phone displays the first letter printed on the number key.

Press the number key twice to display the second letter and three times to display the third.

When [Aa] appears on the display, capital letters are displayed first, then lower case letters, and then the number on the key.

When [aA] appears on the display, lower case letters are displayed first, then the number on the key, and then capital letters.

When you input the first letter or a letter after a blank space, the default mode is [Aa]. From the next letter, the mode changes to [aA] automatically.

You can switch back and forth the mode manually between [Aa] and [aA]. Press /tone; the case (small/capital) of the letter entered changes also.

If two letters in a row use the same number key, enter the first letter, then use right on the four-way function key to move the cursor to the next position to enter the second letter.

For example, to enter the word “Movies”: 1) Press 6 once to enter M.

) Use right on the four-way function key to move the cursor to the right.

3)Press 6 three times to enter o.

4)Press 8 three times to enter v.

5)Press 4 three times to enter i.

6)Press 3 two times to enter e.

7)Press 7 four times to enter s.

8)Press Menu/Select to end your text entry.

Number of times key is pressed (when [Aa] appears on the display)

1

2 ABC

3 DEF

4 GHI

5 JKL

6 MNO

7 PQRS

8 TUV

9 WXYZ

0 OPER

If you make a mistake while entering a name, use right or left on the four-way function key to move the cursor to the incorrect character. Press Clear/Int’com to erase the wrong character, and then enter the correct character. To delete all characters, press and hold Clear/Int’com.

22

Basic Setup

Selecting a Language

Your handset supports three languages: English, French and Spanish. You can set the handset’s language individually. Once you select a language, the menus on the handset will display in that language. The default language is English.

1) Press Menu/Select.

) Select the Handset Setup menu, and then the Handset Language submenu.

3)Move the cursor to choose English, Français (French) or Español (Spanish).

4)Press Menu/Select. You will hear a confirmation tone.

*CPFUGV .CPIWCIG

'PINKUJ

(TCP CKU

Setting the Day & Time

To change the time shown in the display, follow the steps listed below.

If you do not set the clock on your answering system, your messages on the answering system may not have the correct time and day stamp.

1) Press MENU/SELECT.

) Move the cursor to Day & Time and press MENU/SELECT.

3)Use and to select the day of the week, and press MENU/ SELECT.

Note: The day of the week does not appear on the handset display.

&C[ 6KOG

570 #/ = UGNGEV?

4)Use the number keypad (0 through 9) to enter the hour and minutes.

5)Use and to select AM or PM, and press MENU/SELECT. You hear a confirmation tone.

Setup Basic

23

Loading...
+ 53 hidden pages