Platinum Format Subwoofers with HEATT™ Technology
Installation and Operation Guide
Ultimate Sound, Inc |
Ultimate Europe AB |
138 University Parkway |
Flojelbergsgatan 8B |
Pomona, California |
SE 431 37 |
Phone: 909-594-2604 |
Molndal, Sweden |
Fax: 909-594-0191 |
Phone: 46-31 87 64 50 |
Fax: 46-31 87 64 50 |
|
technicalsupport@ultimate-sound.com |
anders.roti@tin.se |
I. Introduction
You have purchased a very sophisticated subwoofer manufactured by Ultimate® Sound. Founded in 1975, Ultimate® Sound makes speakers for every car audio application, speakers for marine environments, enclosed speaker systems, amplifiers, accessories and other products. Our tradition of leadership and innovation in the audio industry continues with innovative products like Platinum Format loudspeakers with HEATT™ Technology.
We recommend you have your new Platinum Format loudspeakers installed by a professional. Professional installation shops have the equipment to do the job correctly, and the experience to recommend the best mounting locations in your vehicle.
Please use your new Platinum Format loudspeakers responsibly. Very loud music can cause permanent hearing loss.
PLATINUM FORMAT FEATURES:
∙HEATT™ Technology means our Platinum Format drivers handle more power with less distortion. A layer of nickel, bonded to an injection molded cone, dissipates heat from the voice coil. The nickel layer also increases the stiffness of the cone for less harmonic distortion at high power.
∙The Butyl Rubber Surround has superior damping characteristics and will last longer than foam surrounds
∙Aluminum Voice Coil Former- Improves thermal power handling by conducting heat away from the coil, into the HEATT™ cone.
∙A Black Chrome Plated Frame provides a striking appearance in keeping with the "Platinum" designation.
∙Spring Loaded Platinum Terminals- Simple, reliable connection and a distinctive look.
∙A Rubber Magnet Cover protects the magnet from chipping or breaking.
II. Package Contents
∙1 pair of Platinum Format subwoofers
∙Instruction manual and warranty card.
2 |
Ultimate® Sound |
III.Specifications
Model |
PS12 |
PS10 |
|
|
|
Size |
12"/310mm |
10"/256mm |
|
|
|
Impedance |
4Ω |
4Ω |
|
|
|
Frequency |
25Hz-500Hz |
30Hz-600Hz |
Response |
|
|
Voice Coil |
2”/50.8mm |
2”/50.8mm |
|
|
|
Magnet |
65 oz. |
50 oz. |
|
|
|
Fs |
28Hz |
32Hz |
|
|
|
Vasft3/Liter |
4.2ft3/118L |
1.8ft3/52L |
|
|
|
Xmax |
6mm |
6mm |
|
|
|
Qts |
.34 |
.39 |
|
|
|
Sensitivity |
92.5dB |
91.3dB |
|
|
|
Driver |
0.09ft3/2.55L |
0.144ft3/4.08L |
Displacement |
|
|
PowerRMS |
160 Watts |
130 Watts |
|
|
|
PowerMAX |
320 Watts |
260 Watts |
|
|
|
Cone |
HEATT™ |
HEATT™ |
|
|
|
Surround |
Butyl |
Butyl |
|
|
|
Frame |
Black Chrome |
Black Chrome |
|
|
|
Magnet Cover |
Rubber |
Rubber |
|
|
|
Mounting |
5.8" |
5.2" |
Depth(In.) |
|
|
Mounting |
147mm |
132mm |
Depth(mm) |
|
|
3 |
Ultimate® Sound |
IV. InstallationSealed Enclosures
1.Sealed enclosures provide excellent performance with Platinum Format subwoofers. They are the simplest enclosures to design and build. We recommend you choose a sealed design if you have not built subwoofer enclosures before. Remember to glue and screw all joints, using enough glue to make sure all joints are air tight. Loosely fill the enclosure with fiberglass, poly-fill, or cotton damping material.
Recommended Sealed Enclosures
|
|
Recommended |
|
Driver |
Total Internal |
||||||
PS12 |
Internal Volume |
Displacement |
|
Volume |
|||||||
Optimum |
1.3ft3/36.8L |
0.144ft3/4.08L |
1.444ft3/40.88L |
||||||||
Minimum |
0.7ft3/19.8L |
0.144ft3/4.08L |
0.844ft3/23.88L |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
PS10 |
|
|
|
|
|
|
|
|
|
|
|
Optimum |
0.75ft3/21.2L |
0.09ft3/2.55L |
0.84ft3/23.75L |
||||||||
Minimum |
0.45ft3/12.7L |
0.09ft3/2.55L |
0.54ft3/15.25L |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Width |
|
|
|
|
|
Depth |
|
|
|
|
|
|
|
|
|
|
|
He
Ultmate igh t
Internal Volume(ft3)= (in Inches)Internal Width X Depth X Height
1728
Internal Volume(L)= (in Centimeters)Internal Width X Depth X Height
1000
4 |
Ultimate® Sound |
V.InstallationPorted Enclosures
1.Ported enclosures use a tuned vent to get additional output at the tuning frequency. Smaller ports than recommended may cause noise from air turbulence. Flared ports will produce less turbulence and noise.
Remember to glue and screw all joints, using enough glue to make sure all joints are air tight.
2.Make sure there is at least 2” between the end of the port and the adjacent wall of the enclosure.
Recommended Vented Enclosures
Maximum Volume PS12
|
Volume |
2.3ft3/65.1L |
|||||||
|
Driver Displacement |
0.144ft3/4.08L |
|||||||
|
Port Displacement |
0.02ft3/0.57L |
|||||||
|
Total Enclosure Volume |
2.46ft3/69.75L |
|||||||
|
Port Diameter |
3”/76mm |
|||||||
|
Port Length |
5”/127mm |
|||||||
|
Tuning |
33Hz |
|||||||
|
F3 |
36Hz |
|||||||
|
|
|
Maximum Volume PS10 |
||||||
|
Volume |
1.5ft3/42.5L |
|||||||
|
Driver Displacement |
0.09ft3/2.55L |
|||||||
|
Port Displacement |
0.03ft3/0.85L |
|||||||
|
Total Enclosure Volume |
1.624ft3/45.9L |
|||||||
|
Port Diameter |
3”/76mm |
|||||||
|
Port Length |
8.4”/213.4mm |
|||||||
|
Tuning |
35Hz |
|||||||
|
F3 |
36Hz |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
Width |
|
|
|
|
Depth |
|
|
|
|
|
|
|
|
Ultimate
Height
|
|
|
5 |
Ultimate® Sound |
Minimum Volume PS12
Volume |
1.4ft3/39.6L |
Driver Displacement |
0.144ft3/4.08L |
Port Displacement |
0.03ft3/0.85L |
Total Enclosure Volume |
1.5724ft3/46.53L |
Port Diameter |
3”/76mm |
Port Length |
6.6”/167.6mm |
Tuning |
39Hz |
F3 |
45Hz |
Minimum Volume PS10 |
|
Volume |
.9ft3/25.5L |
Driver Displacement |
0.09ft3/2.55L |
Port Displacement |
0.04ft3/1.1L |
Total Enclosure Volume |
1.03ft3/29.15L |
Port Diameter |
3”/76mm |
Port Length |
10.3”/261.6mm |
Tuning |
41Hz |
F3 |
45Hz |
See the supplied warranty card for service information
Call 888-909-9988 for technical assistance.
6 |
Ultimate® Sound |
France
I. Introduction
Vous avez acheté un subwoofer de haute qualité, produit par
Ultimate® Sound. Fondé en 1975, Ultimate® Sound fabrique des hautparleurs pour l’usage dans les véhicules, des haut-parleurs pour l’usage dans les bateaux, des systèmes de haut-parleurs en caissons, des amplificateurs, des accessoires et des autres produits. Notre tradition d’être une entreprise de pointe et innovatrice dans l’industrie du car audio continue avec des produits comme les haut-parleurs de la série
Platinum Format avec technologie HEATT™.
Nous vous recommandons l’installation de votre nouveau haut-parleur Platinum Format par un spécialiste du car audio. Les revendeurs spécialisés sont équipés avec les outilles nécessaires pour une installation correcte et ils sont des expertes de trouver les meilleurs emplacements dans votre voiture.
Soyez prudent dans l’usage de votre nouveau haut-parleur de la série Platinum Format. Un niveau sonore excessif peut causer une perte permanente de l’ouïe.
LES CARACTÉRISTIQUES DE LA SÉRIE PLATINUM FORMAT
∙Technologie HEATT™: Les haut-parleurs Platinum Format avec une puissance admise plus haute et moins de distorsions. Une couche en nickel qui est lié à la membrane en alliage injecté enlève de la chaleur de la bobine et elle augmente la rigidité de la membrane et diminue les distorsions harmoniques à hautes puissances.
∙La suspension en gomme butyl avec des caractéristiques d’amortissement meilleures et une duré de vie plus longue que des suspensions en mousse.
∙Le support de la bobine en aluminium- améliore la dispersion de la chaleur: elle enlève la chaleur de la bobine dans la membrane avec technologie HEATT™.
∙Le saladier chromé noir est caractéristique pour l’apparence de la série "Platinum".
∙La connexion amortissants en platine- simple et sûr, connexion avec un look distingué.
∙La protection en gomme protége l’aimant contre rupture.
II. Contenu de l’emballage
∙1 pièce de subwoofer Platinum Format
∙mode d’emploi et carte de garantie
7 |
Ultimate® Sound |