Tyco 912, 911, 913, 916, 917 User Manual

...
0 (0)

Features

Available with soft seats.

Threaded cap standard (back pressure tight). Maximum back pressure 50 psig [3.4 barg].

Hex on valve nozzle provides for easy installation.

Single control ring offers easy adjustability of blowdown.

Pivoting disc design offers exceptional seat alignment.

Guide to nozzle ratio reduces friction.

Valve bodies are heavy duty casting.

Full nozzle design for optimum flow performance.

Threaded side outlet for piped off discharge to eliminate fugitive emissions.

Model Descriptions

Model 910: CS body and bonnet with SS trim.

Model 911: All SS construction.

Model 916: Same as Model 910 except resilient seat/seals. Superior ‘leak-free’ performance.

Model 917: Same as Model 911 except resilient seat/seals. Superior ‘leak-free’ performance.

Model 920: Steel body and bonnet with screwed cap and stainless steel spring for organic fluid vaporizers (ASME Section I -‘V’ Special Use or application). 800 psig [55.2 barg] maximum set pressure.

Model 921: Steel body and bonnet with plain lift lever and stainless steel spring for forced flow steam generators (ASME Section I -‘V’ Special Use or application). 800 psig [55.2 barg] maximum set pressure.

Kunkle Safety and Relief Products

Models 910, 911, 912, 913, 916, 917, 918, 919, 920, 921 and 927

ASME Section VIII, Air/Gas/Steam/Liquid, ‘UV’ National Board Certified. Also available for Vacuum Service

Model 910

Model 927: Steel body and bonnet with packed lift lever and SS spring for high temperature/pressure hot water boilers (ASME Section I -‘V’ Special Use or application). 800 psig [55.2 barg] maximum set pressure.

Applications

Air/gas compressors, intercoolers, aftercoolers.

Liquid filled pressure vessels/systems, ASME Section VIII (UV).

Vacuum systems including pumps, tanks and equipment.

Pressure vessels - containing gas, air, liquid or steam, including tanks and receivers.

Oil/gas separators.

Overpressure relief and protection of pumps, tanks, lines and hydraulic systems.

Bypass relief or pressure regulation.

All SS Model 911 may be suitable for sanitary/edible applications.

Process and industrial corrosive applications.

Total Flow Control Solutions

Tyco reserves the right to change product design and specifications

KUKMC-0392-US-0207

without notice. Copyright © 2002 by Tyco International Ltd.

 

 

 

1” D 1” 1” E 11/4” 11/2” F 11/2” 11/2” G 2” 2” G 2” 2” H 21/2” 21/2” J 3”

Kunkle Safety and Relief Products

Models 910, 911, 912, 913, 916, 917, 918, 919, 920, 921 and 927

Options

Threaded cap. (Variation 01)

Threaded cap with gag. (Variation 02)

Plain lever. (Variation 03)

Plain lever with gag. (Variation 04)

Plain lever with vibration dampener. (Variation 05)

Packed lever. (Variation 06)

Packed lever with gag. (Variation 07)

Models 910 and 911 available with 150#, 300# and 600# inlet flanges and 150# outlet flange per ANSI B16.5.

Model 911 available with Tri-Clover Adapter Inlet.

‘911 ZDE’ ‘911 ZEE’ ‘911 ZFG’ ‘911 ZGG’ ‘911 ZGH’ ‘911 ZHH’ ‘911 ZJJ’

Pressure Limits

See Specification Table

Temperature Limits

Model 910:

-20°/800°F [-28.9°/427°C]

Model 911:

-320°/800°F [-195°/427°C]

Models 916 and 917:

Temperatures limited by Elastomer seat material.

Note

1.ASME standard valves for air, steam and hot water above 140°F [60°C] must have lift lever.

Tyco reserves the right to change product design and specifications

KUKMC-0392

without notice. Copyright © 2002 by Tyco International Ltd.

2

 

 

Kunkle Safety and Relief Products

Models 910, 911, 912, 913, 916, 917, 918, 919, 920, 921 and 927

ASME Section VIII, Non-Code Air/Gas/Steam/Liquid, ‘UV’ National Board Certified. 920 is ASME Section I Special Purpose, Steam, ‘UV’ National Board Certified. 910, 911 Available for Vacuum Service

Service Recommendations for Resilient Seat/Seal Materials

Seat/Seal Materials

Service Recommendation

 

Air, Anhydrous Ammonia, Butane, Carbon Dioxide, Diesel Oil, Ethyl Chloride, Ethyl Ether,

BUNA-N (-40° to 275°F) [-40° to 135°C]

Freons #11 and 12, Fuel Oil, Gasoline, Helium, Hydrogen Sulphide, Kerosene, Lube Oil,

 

Natural Gas, Nitrogen, Oxygen (Gas), Propane, Propylene, Sulphur Dioxide, Vinyl Chloride

 

 

 

Acetone, Air, Amyl Alcohol, Aniline, Benzine, Butane, Carbon Disulphide, Carbon Tetrachloride

 

Dowtherm ‘A’ and ‘J,’ Ethyl Chloride, Ethylene, Ethylene Glycol, Ethyl Alcohol, Gasoline, Hexane,

Viton® A (-10° to 406°F) [-23° to 208°C]

Hydrogen Sulphide, Isobutyl Alcohol, JP - 4 Fuel, JP - 5 Fuel, Kerosene, Lube Oil, Natural Gas,

 

Naphtha, Nitrogen, Propane, Propylene, Propyl Alcohol, Sulphur Dioxide, Toluene,

 

Trichloroethylene,Turpentine, Water, Xylene

Silicone (-100° to 406°F) [-73° to 208°C]

Air, Helium, Nitrogen, Oxygen (Gas)

 

 

Ethylene Propylene (-70° to 400°F) [-57° to 205°C]

Steam, Hot Water

Neoprene (-45° to 300°F) [-43° to 149°C]

Air, Anhydrous Ammonia, Butane, Butyl Alcohol, Castor Oil, Denatured Alcohol, Ethanol, Ethyl

Alcohol, Freons (12, 13, 14 and 22), Glycols, Natural Gas and Silicate Esters

 

 

 

Specifications

Model

Orifice Connections

Min/Max

Min/Max

––––—––––– Dimensions, in [mm] –––––—––––

Approx.

Number1

 

ANSI Standard

Set Pressure

Temp.

A

B

C

C

C

Weight

 

 

Inlet

Outlet

psig [barg]

(°F)2 [°C]

 

 

Threaded

Plain

Packed

lb [kg]

 

 

 

 

 

 

 

 

Cap

Lever

Lever

 

 

 

 

 

 

 

 

 

 

 

 

 

9*BDC#

D

1/2

1”

3/900

-320/800

23/8

15/8

71/4

83/8

9

3

[12.7]

[25.4]

[0.2/62]

[-195/427]

[60.3]

[41.3]

[184.2]

[212.7]

[228.6]

[1.4]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9*BDD#

D

3/4

1”

3/900

-320/800

23/8

15/8

71/4

83/8

9

3

[ 19.0]

[25.4]

[0.2/62]

[-195/427]

[60.3]

[41.3]

[184.2]

[212.7]

[228.6]

[1.4]

 

 

9*BED#

E

3/4

11/4

3/900

-320/800

25/8

2

75/8

83/4

93/8

4

[19.0]

[31.8]

[0.2/62]

[-195/427]

[66.7]

[50.8]

[193.7]

[222.3]

[238.1]

[1.8]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9*BFE#

F

1”

11/2

3/600

-320/800

27/8

23/8

83/4

97/8

101/2

6

[25.4]

[38.1]

[0.2/41.4]

[-195/427]

[73.0]

[60.3]

[222.3]

[250.8]

[266.7]

[2.7]

 

 

9*BGF#

G

11/4

2”

3/600

-320/800

31/4

25/8

101/8

111/4

113/4

8

[31.8]

[50.8]

[0.2/41.4]

[-195/427]

[82.6]

[66.7]

[257.2]

[285.8]

[298.5]

[3.6]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9*BHG#

H

11/2

21/2

3/500

-320/800

31/2

23/4

111/8

13

121/2

11

[38.1]

[63.5]

[0.2/34.5]

[-195/427]

[88.9]

[69.9]

[282.6]

[330.2]

[317.5]

[5.0]

 

 

9*BJH#

J3

2”

3”

3/500

-320/800

4

31/4

121/2

141/2

151/8

15

[50.8]

[76.2]

[0.2/34.5]

[-195/427]

[101.6]

[82.6]

[317.5]

[368.3]

[384.2]

[6.8]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes

1.Replace asterisk with desired Model Number. Replace # with seat material designation. Data applicable to all models.

2.Temperature limits for Model 910 = -20°/800°F [-28.9°/427°C]; for Model 911 = -320°/800°F [-195°/427°C].

Temperature limits for elastomer seats per above table.

3.For C dimensions: pressures above 200 psig [14 barg] add 1.25-inch [31.8 mm] to the overall height.

C

C

C

 

A

A

 

A

 

 

B

B

B

Plain Lever

Threaded Cap

Packed Lever

Tyco reserves the right to change product design and specifications

KUKMC-0392

without notice. Copyright © 2002 by Tyco International Ltd.

3

 

 

Kunkle Safety and Relief Products

Models 910, 911, 912, 913, 916, 917, 918, 919, 920, 921 and 927

910, 911, 916 and 917 Available for Vacuum Service

Parts and Materials - Models 910 and 911 Threaded Cap

No. Part Name

910

911

 

1

Nozzle

SS, SA351-CF8M

SS, SA35-CF8M

 

 

 

 

 

 

2

Body O-ring

Teflon®

Teflon®

 

3

Body

Steel, SA216 Gr. WCB

SS, SA351-CF8M

 

 

 

 

 

 

4

Warn Ring

SS, A743-CF8M

SS, A743-CF8M

 

5

Disc

SS, A479-316

SS, A479-316

 

 

 

 

 

 

6

Set Screw Nut

SS, A479-316

SS, A479-316

 

7

Set Screw

SS, Commercial Gr. 18-8

SS, A479-316

 

 

 

 

 

 

8

Set Screw Seal

Teflon®

Teflon®

 

9

Retainer Ring

SS, A303-316

SS, A313-316

 

 

 

 

 

 

10

Disc Holder

SS, A351-CF8M

SS, A35-CF8M

 

11

Guide

SS, A743-CF8M

SS, A743-CF8M

 

 

 

 

 

12

Screw

SS, Commercial Gr. 18-8

SS, Commercial Gr. 18-8

13

Coiled Spring Pin

SS, A313-302

SS, A313-302

 

 

 

 

 

 

14

Spring

SS: A313-316 or A313-T621

 

 

Alloy steel: A681-H12 or B637-X750

 

 

 

 

 

 

15

Bonnet

Steel, A108 Gr. 1117

SS, SA479-316

 

 

 

 

 

 

16

Spring Step

SS, A479-316

SS, A479-316

 

17

Stem

SS, A479-316

SS, A479-316

 

 

 

 

 

18

Wire and Seal

SS wire and Lead seal, Commercial

SS wire and Lead seal, Commercial

19

Cap

Steel, A108 Gr. C1018

SS, A479-316

 

 

 

 

 

20

Compression Screw

SS, A479-316

SS, A479-316

21

Jam Nut

SS, A479-316

SS, A479-316

 

 

 

 

 

 

22

Cap O-ring

BUNA-N

BUNA-N

 

23

Body Plug

Steel, A108 Gr. C1018

SS, Commercial Gr. 18-8

 

 

 

 

 

 

Guide

SS, A479-316

SS, A479-316

 

24

Guide Locknut

SS, A479-316

SS, A479-316

 

 

Shield

SS, A167-316

SS, A167-316

 

25

Bonnet Gasket

Teflon®

Teflon®

 

 

Bonnet Cap

Steel, A108 Gr. 1117

SS, A479-316

 

26

Cap O-ring

BUNA-N

BUNA-N

 

 

Bonnet

Steel, A108-1018

SS, A312-316

 

No. Part Name

910 Flanged

1

Inlet Flange

CS, A105

 

 

 

2

Inlet Stub End

SS, A479-316

3

Outlet Flange

CS, A105

 

 

 

4

Outlet Stub End

SS, A479-316

18

17

16

15

14

16

13

12

11

10

9

8

7

6

5

4

3

2

1

2

1

Inlet

19

20

21

22

23

Outlet

4

3

Tyco reserves the right to change product design and specifications

KUKMC-0392

without notice. Copyright © 2002 by Tyco International Ltd.

4

 

 

Tyco 912, 911, 913, 916, 917 User Manual

Kunkle Safety and Relief Products

Models 910, 911, 912, 913, 916, 917, 918, 919, 920, 921 and 927

Models 910, 911, 916 and 917 Available for Vacuum Service

24

25

26

Parts and Materials - Models 910 and 911 Packed Lever

23

 

 

22

 

27

No.

Part Name

Materials

 

18

Cap O-ring

BUNA-N 70

21

 

28

 

 

 

 

20

 

19

Jam Nut

SS, A479-316

 

29

19

 

 

20

Lift Cam

SS, A743-CF8M

 

 

21

Cotter Pin

CS, Commercial

18

 

 

 

 

22

Lever

Steel, Zinc Plated A108-GR. 1018

 

 

 

 

 

30

23

Drive Screw

SS, Commercial

 

 

31

24

Retainer Nut

SS, A479-316

 

 

25

Retainer O-ring

BUNA-N

 

 

 

 

 

 

26

Lift Cam O-ring

BUNA-N

 

 

 

27

Cap

(Model 910) Steel, A216 GR. WCB, (Model 911) SS, A743-CF8M

 

 

 

28

Lift Nut

SS, A479-316

 

 

 

29

Lift Washer

SS, A479-316

 

 

 

30

Stem

SS, A479-316

 

 

 

31

Compression Screw

SS, A479-316

 

 

 

32

Bonnet Gasket

Teflon®

 

 

 

 

Guide

(Model 910) SS, A479-316, (Model 911) SS A743-CF8M

 

 

 

33

Guide Locknut

SS, A479-316

 

 

 

 

Shield

SS, A167-316

 

 

 

 

Bonnet Cap

(Model 910) Steel, A108 GR. 1117, (Model 911) SS, A479-316

 

 

 

34

Cap O-ring

BUNA-N

 

 

 

 

Bonnet

(Model 910) Steel, A106 GR. 8, (Model 911) SS, A312-316

 

 

 

Parts and Materials - Models 910 and 911 Plain Lever

 

 

 

No.

Part Name

Materials

 

 

16

 

 

Cadmium plated steel: A231/A231M

15

 

 

11

Spring

SS: A313-302

 

17

SS: A313-316

 

 

 

 

14

 

18

 

 

Alloy steel: A681-H12

13

 

 

12

Bonnet

(Model 910) Steel, A108-1117, (Model 911) SS, A479-316

 

 

13

Jam Nut

SS, A479-316

 

 

19

 

 

14

Compression Screw

SS, A479-316

12

 

 

11

 

 

15

Lever

Steel, A109 Cadmium Plated

 

 

16

Cap

Brass, B176

 

 

20

 

 

17

Lift Nut

SS, A479-316

 

 

 

 

 

21

18

Lift Washer

SS, A479-316

 

 

 

 

 

 

 

 

19

Rivet

Steel, Commercial

 

 

 

20

Cap Screw

SS, Commercial 18-8

 

 

 

21

Spring Step

SS, A479-316

Tyco reserves the right to change product design and specifications

KUKMC-0392

without notice. Copyright © 2002 by Tyco International Ltd.

5

 

 

Kunkle Safety and Relief Products

Models 910, 911, 912, 913, 916, 917, 918, 919, 920, 921 and 927

Model Number/Order Guide

Model

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Number

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example

9

1

0

B

J

H

M

0

1

A

K

E

0

3

0

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model

910

917

927

911

920

 

916

921

 

Connection Model

B

-

Male x Female NPT

J

-

150# Flange x 150# Flange

L

-

300# Flange x 150# Flange

N

-

600# Flange x 150# Flange

Z

-

Tri-clover (911)

Orifice

D F H

E G J

Inlet Size

C - 1/2-inch [12.7 mm]

F - 11/4-inch [31.8 mm]

D - 3/4-inch [19.1 mm]

G - 11/2-inch [38.1 mm]

E - 1-inch [25.4 mm]

H - 2-inch [50.8 mm]

Seat/Seal Material

M- Metal-to-metal – Models 910, 911, 920, 921, 927

B- BUNA-N – Models 916, 917 only

E- EPR – Models 916, 917 only

S- Silicone – Models 916, 917 only

V- Viton® – Models 916, 917 only

N- Neoprene – Models 916, 917 only

Variation (01 through 99)

Number provided only by Kunkle to cover specific feature or option.

01

-

Threaded cap

05

-

Plain lever with vibration

02

- Threaded cap with gag

 

 

dampener

03

-

Plain lever

06

-

Packed lever

04

-

Plain lever with gag

07

-

Packed lever with gag

 

 

 

60 -

BSP Threads

Design Revision

Indicates non-interchangeable revision. Revision A

Valve Service

B- High-temperature Hot Water ASME Sect. I (Model 927 only) - Packed lever only

C- Organic Fluid ASME Section I (Threaded Cap only)

(Model 920 only)

J- Liquid ASME Section VIII (Threaded Cap/Packed Lever only)

K- Air/Gas ASME Section VIII (Plain Lever/Packed Lever required for air)

L- Steam ASME Section VIII (Plain Lever/Packed Lever required)

M- Non-code Liquid (Threaded Cap/Packed Lever only)

N- Non-code Air/Gas

P - Non-code Steam

Q- Vacuum (Threaded Cap/Packed Lever only)

R- Forced Flow Steam ASME Section I (Plain Lever only) (Model 921 only)

Spring Material

E- SS (-60° to 550°F) [-51° to 288°C]

F- High-temperature Alloy Steel (-60° to 800°F) [-51° to 427°C]

Set Pressure

3 psig (0003) through 900 psig (0900) [0.48 barg through 62 barg]

Vacuum 6-inch [200 mbarg] HG (inches of Mercury) (0006) through 29-inch [1000 mbarg] HG (0029) Models 910, 911, 920, 921

Tyco reserves the right to change product design and specifications

KUKMC-0392

without notice. Copyright © 2002 by Tyco International Ltd.

6

 

 

Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/Steam/Liquid, ‘UV’ National Board Certified. 927 is ASME Section I Special Purpose, Steam, ‘UV’ National Board Certified. 910, 911 Available for Vacuum Service

Features

Available with soft seat.

Threaded cap is standard (back pressure tight).

Hex on valve nozzle provides for easy installation.

Single control ring offers easy adjustability of blowdown.

Pivoting disc design corrects misalignment and offers exceptional performance.

Guide to nozzle ratio reduces friction.

Full nozzle design for optimum flow performance.

Threaded side outlet for piped off discharge to eliminate fugitive emissions.

Model Descriptions

Model 912: Full nozzle design. SS warn ring and disc with brass/bronze base. Bronze/ brass body and bonnet.

Model 913: Full nozzle design. Bronze/ brass body and bonnet. 316 SS trim (base, disc and disc holder).

Model 918: Same as Model 912 except resilient seat/seal. Superior ‘leak-free’ performance.

Model 919: Same as Model 913 except resilient seat/seal. Superior ‘leak-free’ performance. Bronze body and bonnet. 316 SS trim (base, disc and disc holder).

Applications

Air/gas compressors - intercoolers - aftercoolers.

Liquid filled pressure vessels/systems -

ASME Section VIII (UV).

Pressure vessels - containing gas, air, liquid or steam. Including tanks and receivers.

Vacuum systems including pumps, tanks and equipment.

Optional materials for low temperature - cryogenic applications.

Oil/gas separators.

Overpressure relief and protection of pumps, tanks, lines and hydraulic systems.

By-pass relief or pressure regulation.

Kunkle Safety and Relief Products

Models 910, 911, 912, 913, 916, 917, 918, 919, 920, 921 and 927

Models 912, 913, 918 and 919 ASME Section VIII, Air/Steam/Gas/Liquid, ‘UV’ National Board Certified. Also available for Vacuum Service

Model 912

Options

Threaded cap. (Variation 01)

Threaded cap with gag. (Variation 02)

Plain lever. (Variation 03)

Plain lever with gag. (Variation 04)

Plain lever with vibration dampener. (Variation 05)

Packed lever. (Variation 06)

Packed lever with gag. (Variation 07)

Pressure and Temperature Limits

Models 912, 918: – Steam

3 to 250 psig [-0.2 to 17 barg]1 -320° to 406°F [-195° to 208°C]

Models 913, 919: – Steam

3 to 300 psig [-0.2 to 17 barg]1 -320° to 425°F [-195° to 219°C]

Models 912, 918: – Air/Gas/Liquid 3 to 300 psig [-0.2 to 21 barg] -320° to 406°F [-195° to 208°C]

Models 913, 919: – Air/Gas/Liquid

3 to 900 psig [-0.2 to 62 barg]

-320° to 425°F [-195° to 219°C]

Vacuum – 6- through 29-inch HG

[200 through 1000 mbarg] – 300°F [149°C]

Maximum back pressure 50 psig [3 barg] - threaded cap and packed lever

Note

1.ASME standard valves for air or steam service must have lift lever. For steam boilers and generators.

Tyco reserves the right to change product design and specifications

KUKMC-0392

without notice. Copyright © 2002 by Tyco International Ltd.

7

 

 

Kunkle Safety and Relief Products

Models 910, 911, 912, 913, 916, 917, 918, 919, 920, 921 and 927

Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/ Liquid, ‘UV’ National Board Certified. Also available for Vacuum Service

Service Recommendations for Resilient Seat/Seal Materials

Seat/Seal Materials1

Service Recommendation

 

Air, Anhydrous Ammonia, Butane, Carbon Dioxide, Diesel Oil, Ethyl Chloride, Ethyl Ether, Freons #11

BUNA-N (-40° to 275°F) [-40° to 135°C]

and 12, Fuel Oil, Gasoline, Helium, Hydrogen Sulphide, Kerosene, Lube Oil, Natural Gas, Nitrogen,

 

Oxygen (Gas), Propane, Propylene, Sulphur Dioxide, Vinyl Chloride

 

 

 

Acetone, Air, Amyl Alcohol, Aniline, Benzine, Butane, Carbon Disulphide, Carbon Tetrachloride

 

Dowtherm ‘A’ and ‘E’, Ethyl Chloride, Ethylene, Ethylene Glycol, Ethyl Alcohol, Gasoline, Hexane,

Viton® A (-10° to 406°F) [-23° to 208°C]

Hydrogen Sulphide, Isobutyl Alcohol, JP - 4 Fuel, JP - 5 Fuel, Kerosene, Lube Oil, Natural Gas,

 

Naphtha, Nitrogen, Propane, Propylene, Propyl Alcohol, Sulphur Dioxide, Toluene, Trichloroethylene,

 

Turpentine, Water, Xylene

Silicone (-100° to 406°F) [-73° to 208°C]

Air, Helium, Nitrogen, Oxygen (Gas)

Ethylene Propylene (-70° to 400°F) [-57° to 205°C] Steam, Hot Water

Neoprene (-45° to 300°F) [-43° to 149°C]

Air, Anhydrous Ammonia, Butane, Butyl Alcohol, Castor Oil Denatured Alcohol, Ethanol, Ethyl

Alcohol, Freons (12, 13, 14 and 22), Glycols, Natural Gas and Silicate Esters

 

 

 

Note

1.These recommendations are a guide only. For the final selection of the proper material, your experience with available elastomers of various lading fluids should be considered.

Specifications

Model2

Orifice

Connections

Maximum Set Pressure

 

––-––––––––

Dimensions, in [mm]

–––-––––––––

Approx.

Number

 

 

ANSI Standard

 

psig [barg]

 

 

A

B

 

 

C

C

 

C

 

Weight

 

 

 

Inlet

 

Outlet

912-9184

913-9195

 

 

 

 

Plain

Threaded

Packed

lb

[kg]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lever

Cap

Lever

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9*BDC

D

1/2

[12.7]

3/4” [19.0]

300

[20.7]

900

[62.1]

23/8 [60]

15/8

[41]

83/8 [213]

71/4

[184]

9

[229]

3

[1.4]

9*BDC7

D

1/2

[12.7]

1”

[25.4]

300

[20.7]

900

[62.1]

23/8 [60]

15/8

[41]

83/8 [213]

71/4

[184]

9

[229]

3

[1.4]

9*BDD3

D

3/4

[19.0]

3/4” [19.0]

900

[62.1]

23/8 [60]

15/8

[41]

83/8 [213]

71/4 [184]

9

[229]

3

[1.4]

9*BDE3

D

1”

[25.4]

1”

[25.4]

900

[62.1]

25/8 [67]

15/8

[41]

85/8 [219]

71/2 [191]

91/8 [232]

3

[1.4]

9*BED

E

3/4

[19.0] 11/4” [31.8]

300

[20.7]

900

[62.1]

25/8 [67]

2

[51]

83/4 [222]

75/8 [194]

93/8 [238]

4

[1.8]

9*BEF3

E

11/4

[31.8] 11/4” [31.8]

900

[62.1]

3

[76]

2

[51]

91/8 [232]

8

[203]

93/4 [248]

4

[1.8]

9*BFE

F

1”

[25.4] 11/2” [38.1]

300

[20.7]

600

[41.4]

27/8 [73]

23/8

[60]

97/8 [251]

83/4 [222]

101/2 [267]

6

[2.7]

9*BFG3

F

11/2

[38.1] 11/2” [38.1]

600

[41.4]

3

[76]

23/8

[60]

10

[254]

87/8 [225]

105/8 [270]

6

[2.7]

9*BGF

G 11/4

[31.8]

2”

[50.8]

300

[20.7]

600

[41.4]

31/4 [89]

25/8

[67]

111/4 [286]

101/8 [257]

113/4 [298]

8

[3.6]

9*BGH3

G

2”

[50.8]

2”

[50.8]

600

[41.4]

31/4 [89]

25/8

[67]

111/4 [286]

101/8 [257]

113/4 [298]

8

[3.6]

9*BHG

H

11/2

[38.1] 21/2” [63.5]

300

[20.7]

500

[34.5]

31/2 [89]

23/4

[70]

13

[330]

111/8 [283]

121/2 [318]

11

[5.0]

9*BJH

J6

2”

[50.8]

3”

[76.2]

300

[20.7]

500

[34.5]

4

[102]

31/4

[89]

141/2

[368]

121/2

[318]

151/8

[384]

15

[6.8]

Notes

1.Maximum temperature controlled by resilient seat/seal material.

2.Replace asterisk with desired Model Number. Data applicable to all models.

3.Available with SS trim only.

4.Maximum pressure on steam is 250 psig.

5.Maximum pressure on steam is 300 psig.

6.For C dimensions: pressures above 200 psig [14 barg] add 1.25-inch [31.8 mm] to the overall height.

7.Special variation required. Consult factory.

C

C

C

 

 

A

A

A

 

 

B

B

B

Plain Lever

Packed Lever

Threaded Cap

Tyco reserves the right to change product design and specifications

KUKMC-0392

without notice. Copyright © 2002 by Tyco International Ltd.

8

 

 

Loading...
+ 16 hidden pages