ADR136A
Unit Cooler
4184 E. Conant St.
Long Beach, CA 90808
Tel. 888-900-1002
Fax. 310-900-1088
www.turboairinc.net
Project :
Model # :
Item # : Qty :
Approval :
Model : ADR136A
Blue anti-corrosion-fin increases the life span of the coil.
Air-pass guard is located at the bottom of the coil to
improve heat exchange rate.
Easy to replace defrost heater. (LED model)
Corrugated fin is used to increase heat exchanges rate
by expanding the surface area.
Even in confined space, all parts can be reached easily
by opening the front cover.
Location of power connector makes replacement of
motor convenient.
Seamless inner groove copper tube increases the heat
exchange rate by reducing the space between the fin
and copper tube.
Venturi type distributor and precise orifice hole are used
to minimize the pressure drop and maximize the
freezing capacity respectively.
Even in confined space, all parts can be reached easily
by opening the front cover.
Ver.201401
Thermostat is installed to prevent over temperature on
heater.
Circuit opens automatically over 50°F.
Parts available :
Expansion Valve (Sporlan) (Pre Mounted)
Solenoid Valve (Sporlan)
Thermostat (Johnson Control)
The spiral fan guard enables cold air to be delivered
efficiently and thoroughly.
The protruding fan and motor placement substantially
reduce vibration and noise.
PSC fan motor, which prevents oil evaporation, is used
for long life expectancy.
EC Motor (optional) for high energy efficiency.
Unique air flow system (patent pending) results in
improved circulation within crowded walk-in
cooler/freezer.
Anti-oxidizing stainless steel mounting and bolts.
1 YEAR
(
)
U.S.A only
Loading...