TRSYS CP1008, CP1008, CP1001, CP1001, CP1000 Datasheet

CP1000 THRU CP1008

SINGLE-PHASE SILICON BRIDGE

VOLTAGE - 50 to 800 Volts CURRENT - P.C. MTG 3A, HEAT-SINK MTG 10A

FEATURES

CP-10

•Surge overload rating— 200 Amperes peak

•Low forward voltage drop and reverse leakage

•Small size, simple installation

•Plastic package has Underwriter Laboratory Flammability Classification 94V-O

•Reliable low cost construction utilizing molded plastic technique

MECHANICAL DATA

Case: Molded plastic with heatsink integrally mounted in the bridge encapsulation

Terminals: Leads solderable per MIL-STD-202,

Method 208

Weight: 0.21 ounce, 6.1 grams

MACXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

At 25 ambient temperature unless otherwise noted; resistive or inductive load at 60Hz .

		CP1000	CP1001	CP1002			CP1004	CP1006	CP1008	UNITS
Max Recurrent Peak Rev Voltage		50	100	200			400	600	800	V
Max Bridge Input Voltage RMS		35	70	140			280	420	560	V
Max Average Rectified Output at TC=50 *					10.0					A
See Fig. 2	at TC=100 *				3.0					A
	at TA=50 **				3.0
Peak One Cycle Surge Overload Current					200					A
Max Forward Voltage Drop per element at					1.1					V
5.0A DC & 25 . See Fig. 3
Max Rev Leakage at rated Dc Blocking										A
Voltage per element at 25					10.0
See Fig 4	at100				1.0					mA
Typical junction capacitance per leg (Note 4) CJ					200					PF
I2t Rating for fusing ( t<8.3ms)					164					A2S
Typical Thermal Resistance (Note 2) R JA					25					/W
Typical Thermal Resistance (Note 3) R JC						5
Operating Temperature Range				-55	TO +125
Storage Temperature Range				-55	TO +150

NOTES:

*Unit mounted on metal chassis.

**Unit mounted on P.C. board.

1.Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw.

2.Units Mounted in free air, no heatsink. P.C.B at 0.375”(9.5mm) lead length with 0.5×0.5”