Tripp Lite PDUMH30NET User Manual

0 (0)
Tripp Lite PDUMH30NET User Manual

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA Telephone: +(773) 869 1234 E-mail: saleshelp@tripplite.com

Model #: PDUMH30NET

Switched, Metered PDU with Remote Monitoring - 2U Rackmount Power Distribution Unit for Networks with Individually Switchable Outlets, Current Metering, Remote Monitoring and Control

Highlights

2U rackmount switched PDU with digital current monitoring, remote control and temperature / humidity montitoring capability

120V 30A maximum total capacity with L5-30P input plug and 16 5-15/20R controllable outlets

Enables ability to turn on, turn off, recycle or lock-out power to each individual outlet

Programmable or real-time outlet power control via built-in web/network monitoring and control card

Automatic sequential outlet turn-on prevents inrush-related equipment interaction on startup

Cord retention brackets keep vital equipment plugs connected

Description

Tripp Lite Switched, Metered Rack Power Distribution Units enable a variety of advanced network control and monitoring functions by giving IT Managers the ability to turn on, turn off, recycle or lock-out power to each individual receptacle and remotely monitor PDU power consumption and in-rack environmental conditions. Switched PDU systems can be accessed, configured and controlled through secure web, SNMP or Telnet Interface. Individually switched outlets can be controlled via a built-in web/network interface, enabling remote reboot of unresponsive network hardware. User defined power-up and power-down outlet sequences ensure proper operation of interdependent IT systems and prevent inrush-related overloads as devices are powered on. Programmable load-shedding of less critical devices at user-defined intervals extends UPS uptime in response to power failures. Unused PDU outlets can be electronically locked-off to prevent powering of unauthorized hardware. PDU power consumption (current) is displayed locally and can be monitored via the web/network interface, with user-defined alarms to warn of potential overloads before critical IT mains or branch breakers trip. Optional ENVIROSENSE temperature/humidity probe enables remote monitoring of in-rack environmental conditions and alarms for up to 3 user supplied contact-closure sensors. Supports real-time monitoring, notification and logging of all on-board reporting functions with user-specified alarm thresholds and actions for each reported condition. Switched PDU systems can be accessed, configured and controlled through secure web, SNMP or Telnet Interface.

PDUMH30NET Switched, Metered, 2U rack PDU supports 30A maximum capacity at 120V (agency de-rated to 24 amps). Includes attached L5-30P input plug and 16 5-15/20R switched outlets arranged in two separately breakered 8 outlet banks. Visual and remote current monitoring tracks the current for each 8 outlet bank separately, plus offers total power consumption for all 16 outlets combined. Supports 2U rackmount installation in 19 inch 4 post rack enclosures. 2POSTRMKITWM enables installation in 2 post relay racks. Included cord retention brackets keep vital network equipment plugged in and continuously powered.

Applications

Ideal for network configurations requiring a switched, metered and monitored PDU supporting individual outlet rebooting, load shedding and remote web/network current monitoring of critical networking components

Package Includes

Rackmount PDU

4 post compatible mounting brackets

Features

120V 30A maximum capacity (agency de-rated to 24 amps) Switched, Metered and Monitored Power Distribution Unit (PDU) with built-in web/network interface in 2U rackmount form factor

L5-30P input plug and 16 5-15/20R controllable outlets

Supports individually controllable output receptacles, current metering, network monitoring and remote control via built-in web/network monitoring and control card

Offers the ability to turn on, turn off, recycle or lock-out power to each individual PDU receptacle on a programmable or real-time basis Switchable outlets enable a number of advanced networking abilities, such as remote reboot on-demand of locked IT equipment, custom power-on/power-off outlet sequencing, automatic load-shedding of optional loads during power failures and disabling unused outlets to prevent the connection of unauthorized equipment loads

Remote interface provides data regarding input power conditions, load level and individual outlet power status via secure network or web browser interface

Supports notification and logging of all major power events and user specified alarm thresholds

Optional ENVIROSENSE temperature and humidity probe enables remote monitoring of environmental conditions and the ability to report conditions from up to two contact-closure sensors

Optional ENVIROSENSE accessory also supports the connection of up to three user supplied contact-closure sensors to selectively notify, monitor and log reported conditions, such as rack door access

DHCP/Manual configuration support provides the ability to have network settings automatically assigned to the card, or manually assigned via permanent IP addresses

10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network

Real-time clock support maintains the time of day and date even if the PDU is shut down and unpowered

2-tier level access allows an administrator and a guest to log into the web browser for monitoring and/or management of all intelligent PDUs and similarly equipped UPS systems

Alert notifications via email or SNMP traps give users the added advantage of having an immediate event notification

Protocols supported include HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP, NTP

Front panel ammeter with push-button toggle switch displays power consumption for all 3 loading segments (8 outlets in bank 1, 8 outlets in bank 2 and total load of bank 1&2 combined)

On initial power-up, outlets are automatically energized at 250 millisecond intervals to prevent inrush-related equipment interaction and mains circuit overloads

Included cord retention brackets keep vital network equipment plugged in and continuously powered

2U rackmount installation supported in 4 post rack enclosures

Optional 2POSTRMKITWM enables installation in 2 post relay racks

Specifications

SYSTEM OVERVIEW

Voltage compatibility

120V

 

 

Frequency

50/60 Hz

compatibility

 

 

 

OUTPUT

 

Output nominal

120V

voltage

 

 

 

Outlet quantity / type

16 5-20R outlets

 

 

Customized load

Each outlet is individually controllable via remote interface

management

 

receptacles

 

 

 

Overload protection

Outlets are arranged in two banks of 8. Each bank is protected by a separate 20A circuit breaker

 

 

INPUT

 

Maximum input amps

30A maximum (Agency de-rated to 24A continuous)

 

 

Input connection type

L5-30P

 

 

Input cord length

10 ft / 3m

 

 

Recommended

120V

Electrical Service

 

 

 

Loading...
+ 2 hidden pages