TEW-654TR
Quick Installation Guide
TEW-654TR
1.01
Table of Contents
Table of Contents
Version 06.16.2009
English ......................................................................................................
Troubleshooting ........................................................................................
1
1
3
5
9
1. Before You Start
2. Hardware Installation .........................................................................
3.
.................................................................................
Configure the TEW-654TR ................................................................
1. Before You Start
English
1
Installation Requirements
Package Contents
?
?
?
?
?
?
?
TEW-654TR
CD-ROM (User’s Guide)
Multi-Language Quick Installation
Guide
Travel case
USB to power-pin cable
(0.45m/2.5ft.)
Cat. 5 Ethernet cable (1.1m/3.6ft.)
Power adapter (5V, 1.2A)
?
?
?
?
A computer with a wireless network adapter properly installed
Web Browser: Internet Explorer (6.0 or higher)
Broadband Internet
Installed Cable or DSL Modem
Note: For AP and AP Client mode instructions, please refer to the
troubleshooting section and User's guide.
English
2
Application
300Mbps Wireless N
Travel Router Kit
(TEW-654TR)
Laptop with
Wireless N USB Adapter
(TEW-624UB)
Laptop with Wireless N
USB Adapter
(TEW-644UB)
Laptops with
Wireless N USB Adapters
(TEW-644UB)
300Mbps Wireless N
ADSL2/2+ Modem Router
(TEW-635BRM)
Internet
Router Mode
AP Client Mode
Modem
Router
AP Mode
Laptop with
Wireless N USB Adapter
(TEW-624UB)
300Mbps Wireless N
Travel Router Kit
(TEW-654TR)
300Mbps Wireless N
Travel Router Kit
(TEW-654TR)
Internet
Internet
English
3
2. Hardware Installation
Note:
1. Gather all information related to your Internet Connection before you start. If
necessary, contact your Internet Service Provider (ISP).
2. The below steps is for router mode configuration. For AP and client mode
instructions, please refer to the User's Guide.
1. Verify that you have an Internet
connection when connecting your
computer directly to the Cable or
DSL modem or Ethernet jack. Open
your browser (e.g. Internet
Explorer) and type in a URL (e.g.)
in the address bar.
Cable/DSL Modem
Internet
S/N:
TEW-654TR H/W:V1.0R
FCC ID: S9Z TEW654TR
0470
CA09210122334
3. Connect one end of the provided
RJ-45 cable to the TEW-654TR's
LAN port. Connect the other end
of the cable to your modem or
Ethernet jack (e.g. in a hotel room).
2. Move the switch on the bottom of
the TEW-654TR to RT mode.
English
4
5. Verify that the following panel lights
are on: POWER, LAN and WLAN.
6. Press the WPS button on the
TEW-654TR for 5 seconds, then let
go. The WLAN LED will be blinking
amber.
7. Follow the WPS push button setup
instructions for your Wireless
Adapter's configuration utility to
connect to the TEW-654TR.
4. Connect the AC Power Adapter to
the wireless router and then to a
power outlet.
Loading...