Quick Installation Guide
TE100-MP1U
TE100-MP2U
TEW-MP2U
Table of Contents
English ....................................................................................................................................................... |
1 |
|
1. |
Before You Start ................................................................................................................................ |
1 |
2. |
How to Connect ................................................................................................................................. |
3 |
3. |
Configure the Print Server ................................................................................................................. |
4 |
4. |
Configure Wireless Settings (TEW-MP2U only) ................................................................................ |
6 |
5. |
Printing .............................................................................................................................................. |
8 |
6. |
Faxing ................................................................................................................................................ |
10 |
7. |
Scanning ........................................................................................................................................... |
11 |
8. |
Storage .............................................................................................................................................. |
12 |
Troubleshooting ........................................................................................................................................... |
14 |
|
Version 04.06.07
1. Before You Start
Package Contents
System Requirements
Note:
1.Do not install MFP Server Control Center, connect printer to print server and connect the computer to the print server until instructed to do so.
2.The MFP Server Control Center must be installed on each computer in order to use your multi-function printer.
1
English
Application
54Mbps 802.11g Wireless 2-Port Multi-Function USB 2.0 Print Server
(TEW-MP2U)
|
|
|
Workstation with |
|
|
|
Wireless PCI Adapter |
Multi-Functional |
External USB 2.0 |
|
(TEW-423PI) |
|
|
||
USB 2.0 Printer |
Storage Drive |
|
|
|
|
|
Internet |
|
Notebook with |
54Mbps 802.11g |
Cable/DSL Modem |
Wireless PC Card |
Wireless Firewall Router |
||
|
(TEW-421PC) |
(TEW-432BRP) |
|
1 or 2 Port 10/100Mbps Multi-Function USB 2.0 Print Server
(TE100-MP1U/TE100-MP2U)
Internet
Cable/DSL
Modem
Cable/DSL 4-Port
Broadband Router
(TW100-S4W1CA)
Multi-Functional |
External USB 2.0 |
Workstations with Fast Ethernet Adapter |
USB 2.0 Printer |
Storage Drive |
(TE100-PCIWN) |
2
English
2. How to Connect
1.Install the printer drivers to your computer. Then shutdown the printer and disconnect the printer from your computer.
Note: Please refer to your printer's manual for printer installation instructions.
2.Connect the Power Adapter to the Print Server and then to a power outlet.
3.Connect a RJ-45 network cable from a Switch/Router to the LAN port of the Print Server.
4.Connect the USB Printer to the USB port of the Print Server.
5.Power ON printer.
6.Verify the Power, Link and USB1 or USB2 LEDs are lit on the Print Server.
3
English
3. Configure the Print Server
1. Insert the Utility CD-ROM into your computer's CD-ROM Drive and then click Install Utility.
2.Follow the InstallShield Wizard instructions. Then click Finish.
3.Click the Print Server and click
Configure Server.
4.Enter the User name and Password, and then click Login. User Name: admin
Password: admin
4
English
Loading...