Toyota Yaris iA 2018 Owners Manual

Table of contents

1 Warnings and Safety information.................................	4
2 Getting started ................................................................	6
2.1 Before using the navigation system ..................................................	6
2.2 Navigation menu ................................................................................	8
2.3 Buttons and other controls on the screen ......................................	10
2.3.1 Using keyboards ..................................................................................	10
2.3.2 Press and Hold .....................................................................................	11
2.4 Map screen........................................................................................	12
2.4.1 Navigating on the map.........................................................................	12
2.4.2 Position markers ..................................................................................	13
2.4.2.1 Selected map location (Cursor) and selected map object........	13
2.4.3 Objects on the map ..............................................................................	13
2.4.3.1 Streets and roads......................................................................	13
2.4.3.2 Turn preview and Next street ..................................................	14
2.4.3.3 Lane information and Signposts..............................................	16
2.4.3.4 Junction view...........................................................................	17
2.4.3.5 Highway/Freeway exit services...............................................	17
2.4.3.6 Elements of the active route ....................................................	19
2.4.4 Manipulating the map ..........................................................................	20
2.4.5 Checking the details of the current position (Where Am I?)...............	23
2.5 Voice Recognition.............................................................................	24
2.5.1 Voice command list .............................................................................	24
3 On-road navigation ......................................................	26
3.1 Selecting the destination of a route.................................................	26
3.1.1 Entering an address or a part of the address ........................................	27
3.1.1.1 Entering an address .................................................................	27
3.1.1.2 Entering the midpoint of a street as the destination ................	32
3.1.1.3 Selecting an intersection as the destination.............................	35
3.1.1.4 Selecting a city center as the destination.................................	38
3.1.2 Selecting the destination from the POI (point of interest) ...................	40
3.1.2.1 Quick search for a POI (point of interest) ...............................	40
3.1.2.2 Searching for Help nearby.......................................................	43
3.1.2.3 Searching for a POI (point of interest) by category ................	46
3.1.2.4 Searching for a POI (point of interest) by name .....................	50
2

Yaris iA_Navi_OM99Q50z_(U)

3.1.3 Searching for a Place using Local Search (Only some countries and
regions) ................................................................................................	54
3.1.4 Selecting a map location as the destination .........................................	56
3.1.5 Selecting the destination from your Favorites .....................................	58
3.1.6 Selecting a recent destination from the History...................................	60
3.1.7 Entering the coordinate of the destination ...........................................	62
3.2 Checking route parameters and accessing route related
functions............................................................................................	64
3.3 Modifying the route .........................................................................	66
3.3.1 Selecting a new destination when already having a route:
New Route, Waypoint or Final Destination.........................................	66
3.3.2 Editing the list of destinations (Edit Route).........................................	67
3.3.3 Checking route alternatives when planning the route..........................	68
3.3.4 Changing the road types used in route planning..................................	70
3.4 Saving a location as a Favorite destination....................................	72
3.4.1 Editing the details of a Favorite destination ........................................	72
4 Reference Guide ...........................................................	74
4.1 Concepts............................................................................................	74
4.1.1 Smart Zoom .........................................................................................	74
4.1.2 Route calculation and recalculation.....................................................	74
4.1.3 Road safety cameras and other proximity alert points (Only some
countries and regions)..........................................................................	76
4.1.4 Speed limit warning (Only some countries and regions).....................	77
4.1.5 Traffic information in route planning (Only some countries and
regions) ................................................................................................	78
4.1.5.1 Historical traffic ......................................................................	78
4.2 Settings menu ...................................................................................	79
4.2.1 Guidance Settings ................................................................................	80
4.2.2 Warning Settings..................................................................................	80
4.2.3 Traffic Settings ....................................................................................	81
4.2.4 Route Settings ......................................................................................	82
4.2.5 Map Settings ........................................................................................	83
4.2.6 Visual Guidance settings .....................................................................	85
5 Glossary.........................................................................	86
6 End-User Terms ...........................................................	88

3

Yaris iA_Navi_OM99Q50z_(U)

1 Warnings and Safety information

The navigation system guides you to your destination using the GPS receiver. The navigation system does not transmit your GPS position and you cannot be tracked.

It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate the navigation system before you start your journey. Plan the route before your departure and stop if you need to change the route.

Drive the vehicle according to the road signs and the road shape. If you deviate from the recommended route, the navigation system changes the instructions accordingly. For more information, consult the End-User Terms (page 88).

4

Yaris iA_Navi_OM99Q50z_(U)

Memo

1

2

3

4

5

6

5

Yaris iA_Navi_OM99Q50z_(U)

2 Getting started

2.1 Before using the navigation system

To use the navigation system, the SD card containing the map information needs to be inserted in the SD card slot.

Type A	Type B
SD card slot	SD card slot

Type C	Type D
SD card slot	SD card slot

Type E	Type F
SD card slot	SD card slot

6

Yaris iA_Navi_OM99Q50z_(U)

When inserting the SD card, never move the slider on the side of the SD card to the LOCK position. If the slider is set to LOCK, the SD card cannot be read and the navigation system will not operate.

This SD card is valid for use in only one vehicle. Never use it in another vehicle. If the SD card is used first in one vehicle and then in another, the navigation system for either one of the vehicles may become inoperable.

7

1

2

3

4

5

6

Yaris iA_Navi_OM99Q50z_(U)

2.2 Navigation menu

You can reach all parts of the navigation system from the Navigation menu. Select and open the navigation menu.

You have the following options:

• / : Open/close

Opens and closes the UMP (menu bar).

The UMP (menu bar) is displayed on the lower part of the screen.

•: Adds a destination.

Select your destination by entering an address or selecting a POI (point of interest), a location on the map or one of your Favorite destinations. You can also look up your recent destinations from the Smart History by entering the coordinates. If an Internet connection is available, Local Search can be of further help to find your destination.

8

Yaris iA_Navi_OM99Q50z_(U)

•: Displays the screen where traffic information and the GPS reception conditions can be set and verified.

•: Cancels waypoint/route

•: Finds Places nearby

You can search for points of interest (POI) near the vehicle position.

•: Displays the route parameters and the route in its full length on the map. You can also perform route-related actions such as editing or canceling your route, picking route alternatives, avoiding parts of the route, simulating navigation or adding the destination to your Favorites.

• / / : Changes View mode

The map view mode can be changed (2D north up/2D heading up/3D).

•: Switches to the Settings screen where you change navigation settings.

Some functions are not available depending on some countries and regions.

9

1

2

3

4

5

6

Yaris iA_Navi_OM99Q50z_(U)

2.3 Buttons and other controls on the screen

2.3.1 Using keyboards

You only need to enter letters or numbers when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch between various keyboard layouts, for example English, Greek or numerical.

	Task			Instruction
	Correcting your entry on	Select		to remove the unneeded character(s).
	the keyboard
		Select and hold the button to delete several characters
		or the entire input string.
	Entering a space, for	Select the		button at the
	example between a first
		bottom center of the screen.
	name and a family name
	or in multi-word street
	names
	Entering upper and lower	When entering a text, the first character appears in
	case letters	upper case while the rest of the text is in lower case.
		Select		to enter an upper case letter or select twice
		to turn on Caps Lock. Select again and lower case
		letters return.
	Finalizing the keyboard	Select		.
	entry
		•	Accepting the suggested search result
		•	Saving your input
		Select		.
		•	Opening the list of search results
	Canceling the keyboard	Select		.
	entry (returning to the
	previous screen)

10

Yaris iA_Navi_OM99Q50z_(U)

2.3.2 Press and Hold

You usually need to select the screen only once, however, some useful features can be accessed with combined touch screen selecting. Those are as follows:

	Action	Button(s)	Details
	Continue	,	Touching the button on the map screen once
	pressing the		changes the scale in one step. Continuously
	button.		touching the button changes the scale sequentially.
		,	Touching the button on the map screen once
			changes the point of view in one step.
			Continuously touching the button changes the
			point of view sequentially.
		,	Touching the button on the map screen once
			rotates the map. Continuously touching the button
			rotates the map sequentially.
			Touching the button on the keyboard screen once
			erases one character. Continuously touching the
			button erases several characters rapidly.

11

1

2

3

4

5

6

Yaris iA_Navi_OM99Q50z_(U)

2.4 Map screen

2.4.1 Navigating on the map

The data fields are different when you are navigating an active route and when you have no specified destination (the burgundy line is not displayed).

Field	Description
	Shows the speed limit of the current road if the map contains
	it.
* For vehicles with
the Traffic Sign
Recognition
System (TSR), it
does not display
in the center
display, only the
active driving
display.
	Shows the distance you need to travel on the route before
	reaching your final destination.
	Shows the estimated arrival time at the final destination of
	the route.
	If the navigation system is capable of receiving live traffic
	information, the calculation takes into account traffic delays
	affecting your route.
	This estimation can be inaccurate at times.

12

Yaris iA_Navi_OM99Q50z_(U)

Some functions are not available depending on some countries and regions.

2.4.2 Position markers

2.4.2.1 Selected map location (Cursor) and selected map object

You can mark a map location in the following ways:

•	Select the map during route guidance.
•	Select the map when asked so that the destination can be confirmed after the search
	is completed.
•	Select the destination from the map. (page 56)

When a map location is selected, the Cursor appears at the selected point on the map.

A symbol

with a combined crosshair and red circle is displayed for easy

visibility of any map scale size.

The location of the Cursor can be used as the destination of the route.

You can search for a POI (point of interest), or you can save it as one of your Favorites destinations.

You can also select some of the objects on the map. If you select the map at the icon of a POI (point of interest) or a traffic event, the object will be selected. You can then get information about this object or use it as a route point.

Some functions are not available depending on some countries and regions.

2.4.3 Objects on the map

2.4.3.1 Streets and roads

The navigation system shows the roads in different widths and colors so that they can be easily identified. A highway/freeway will be thicker and a different color than a small street.

13

1

2

3

4

5

6

Yaris iA_Navi_OM99Q50z_(U)

2.4.3.2 Turn preview and Next street

When navigating a route, the top section of the Map screen shows information about the next maneuver, street or city.

There is an area at the top left part of screen which indicates the next operation. Displays both the event type (such as turning, detouring, exiting expressways) and the distance from the current position.

When the next event approaches, the second event is displayed using a small icon. If there is no second event, only the next event is displayed.

Most of these icons are very intuitive. The same symbols are used in both fields:

Icon	Description

Turn left.

Turn right.

Turn back.

Bear right.

Turn sharp left.

Keep left.

Continue straight in the intersection.

14

Yaris iA_Navi_OM99Q50z_(U)

Icon	Description
	Go right on the roundabout, 3rd exit
	(next maneuver).
	Enter highway/freeway.
	Exit highway/freeway.
	Board ferry.
	Leave ferry.
	Approaching a waypoint.
	Approaching the destination.

15

1

2

3

4

5

6

Yaris iA_Navi_OM99Q50z_(U)

2.4.3.3 Lane information and Signposts

When navigating on multilane roads, it is important to take the appropriate lane in order to follow the recommended route. If lane information is available in the map data, the navigation system displays the lanes and their directions using small arrows at the bottom of the map. Highlighted arrows represent the lanes and direction you need to take.

Lane guidance is provided constantly if there is map information. Signposts are displayed at the top of the map. The color and style of the signposts are similar to the real ones you see above road or by the roadside. They show the available destinations and the number of the road the lane leads to.

When navigating a route, only the signpost that points to the lane(s) to be taken is displayed in bright colors; all others are darker. All signposts and lane guidance arrows are displayed in vivid colors while driving (when there is no recommended route).

If you want to hide the currently displayed signposts, touch anywhere and the normal Map screen returns until new signpost information is received.

16

Yaris iA_Navi_OM99Q50z_(U)

2.4.3.4 Junction view

If you are approaching a highway/freeway exit or a complex intersection and the needed information exists, the map is replaced with a 3D view of the junction. The optimum driving lane is indicated by an arrow, and road signs are displayed as additional information at the top of the screen.

2.4.3.5 Highway/Freeway exit services

You may need a gasoline station or a restaurant during your journey. This feature displays a new button on the map when you are driving on highways/freeways.

17

1

2

3

4

5

6

Yaris iA_Navi_OM99Q50z_(U)

Select this Open button to open a panel with the details of the next few exits or service stations.

Applicable only when the setting is “Only when menu is open”.

Select any of them to display the exit area on the map. You can now easily add this exit as a waypoint to your route if needed.

There are two types of settings for displaying the next expressway exit; one which constantly displays the next expressway exit while traveling on an expressway, or the other which displays the next expressway exit only when the menu panel is open. You can change the settings in Visual Guidance settings (page 85).

18

Yaris iA_Navi_OM99Q50z_(U)

2.4.3.6 Elements of the active route

The navigation system shows the route in the following way:

	Symbol		Name	Description
		Current car position		If there is a road close by, a blue-colored arrow
		marker		symbol moves to the road which is the closest.
				The red mark present around a blue-colored
				arrow symbol indicates the correct GPS
				information. It may be indicated away from the
				road because there is no existing road
				information.
		Waypoint		An intermediate destination of the route before
		(intermediate		reaching the final destination.
		destination)
		Destination (end		The final destination of the route.
		point)
		Route color		The route always stands out with its color on
				the map, both in daytime and in nighttime
				mode.
		Streets and roads that		You can choose whether you want to use or
		are excluded from the		avoid certain road types (page 82). However,
		navigation		when the navigation system cannot avoid such
				roads, the route will include them and it will
				show them in a color that is different from the
				route color.
		Streets and roads that		Road segments may be affected by traffic
		are affected by traffic		events received. These streets and roads are
		events		displayed in an alternate color, and small
				symbols displayed along the route show the
				type of traffic event.

Some functions are not available depending on some countries and regions.

19

1

2

3

4

5

6

Yaris iA_Navi_OM99Q50z_(U)

2.4.4 Manipulating the map

By touching and dragging any part of the map screen, it can be moved to a location close to the currently displayed map.

In addition, the map operation button is displayed, and by touching each of the buttons, you can zoom in and out of maps, change the map perspective and select a destination.

	Action	Button(s)	Description
	Map movement	No buttons	You can move the map in any direction: select and
	using touch and		hold the map, and move your finger towards the
	drag		direction you want to move the map.
	Zooming in	,	Changes how much of the map is displayed on the
	and out		screen.
			The navigation system uses high-quality vector
			maps that let you examine the map at various
			zoom levels, always with optimized content.
			Map scaling has a limit in 3D map view mode. If
			you zoom out further, the map switches to 2D view
			mode.
			Select the button once to modify the view in large
			steps, or select and hold the button to modify it
			continuously and smoothly.

20

Yaris iA_Navi_OM99Q50z_(U)

Action	Button(s)	Description		1
Tilting up and	,	Changes the vertical view angle of the map in 3D
down		mode.
				2
		Select the button once to modify the view in large
		steps, or select and hold the button to modify it
		continuously and smoothly.
				3
Rotating left	,	Changes the horizontal view angle of the map.
and right		Select the button once to modify the view in large
		steps, or select and hold the button to modify it		4
		continuously and smoothly.
Compass		The direction of the compass shows North. Select
				5
		the button to switch to North-up view, and then
		select again to rotate the map in the previous
		direction.		6
Open/close	,	The UMP (menu bar) is displayed on the lower
		part of the screen.
		Hides the displayed UMP if the UMP has been
		displayed.
Select		Select this button to select the Cursor as a new
destination		destination. The route is automatically calculated.
Return to		Select this button to move the map back to follow
normal		the current GPS position. Automatic map rotation
navigation		is also re-enabled.
		The map manipulation buttons disappear and
		navigation continues.

21

Yaris iA_Navi_OM99Q50z_(U)

Action	Button(s)			Description
2D or 3D view	,	,	When this button is selected, the map view mode
			can be changed.
			•	: The map is displayed so that north is up
				regardless of the direction of travel.
			•	: The map is rotated so that the direction of
				travel is displayed in the upward direction.
			•	: Displays things such as actual construction
				sites three dimensionally on the map.
Zoom-in/			You can zoom-in/zoom-out of maps.
zoom-out mode
Rotate mode			Rotates maps.
Perspective			You can change the angle of perspective on a map.
angle mode

22

Yaris iA_Navi_OM99Q50z_(U)

2.4.5 Checking the details of the current position (Where Am I?)

This screen contains information about the current position (or about the last known position if GPS reception is not available).

You can access this screen from the map in one of the following ways:

1.Select after selecting on the MAP screen.

2.Select the Where Am I? screen.

23

1

2

3

4

5

6

Yaris iA_Navi_OM99Q50z_(U)

2.5 Voice Recognition

Some items can be operated by voice using the vehicle’s microphone.

1.Press the talk button on the steering switch.

2.After “Say a command” is output from the speaker and the beep sound is heard, say your commands.

<Example voice recognition> Set a new destination, “Gas station” (on navigation screen).

1)Press the talk button on the steering switch.

2)After “Say a command” is output from the speaker and the beep sound is heard, say, “New Destination”.

3)After “Which type of destination would you like?” is output from the speaker and the beep sound is heard, say, “Gas station”.

4)After “Gas station, say the desired line number. You can also say: Try again” is output from the speaker and the beep sound is heard, say, “Number one” (Destination is gas station on the first row).

5)After “To begin navigation, say start” is output from the speaker and the beep sound is heard, say, “Start” to start route guidance.

2.5.1 Voice command list

If you have seven or more candidates, say the command, “Page down” to move the list.

Function operation	Voice command
Switches to the screen where	New Destination
new destinations can be selected.
Displays the route to your home.	Take me home
Specifies the destination using	Navigate to an address
the address.
Displays the history of the	Navigate to a recent destination
recently specified destinations.
Displays the current location.	Where am I?
Reads out the previous guidance	Repeat instruction
again.
Adds a route using keywords.	Add way Point ~
Zooms in/out of the map screen.	Zoom in/Zoom out
Adds the route using the address.	Add way point address/Travel via address
	24

Yaris iA_Navi_OM99Q50z_(U)

Memo

1

2

3

4

5

6

25

Yaris iA_Navi_OM99Q50z_(U)

3 On-road navigation

You can set up your route in different ways:

If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation).

You can plan routes with multiple destinations. Select the first destination. Then select a second destination and add it to your route to create a multi-point route. You can add as many destinations to your route as you like.

3.1 Selecting the destination of a route

The navigation system offers you several ways of choosing your destination:

•Enter a full address or a part of an address (page 27).

•Select a POI (point of interest) from a database as your destination (page 40).

•Searches the destination from the map (page 56).

•Use a previously saved Favorite destination (page 58).

•Select a location from the History of previously used destinations (page 60).

•Enter the coordinate of the destination (page 62).

There are other convenient functions.

26

Yaris iA_Navi_OM99Q50z_(U)

3.1.1 Entering an address or a part of the address

If you know at least a part of the address, it is the quickest way to select the destination of the route.

Using the same screen, you can find an address by entering:

•Destination address

•The center of a city

•An intersection

•The midpoint of a street

If an address or part of a facility name is input, a search candidate list including the input characters is displayed. The greater the number of characters input the more the list is refined.

3.1.1.1 Entering an address

To enter an address as the destination, do as follows:

1.Select after selecting on the MAP screen.

2.Select .

3.By default, the navigation system proposes the country and city where you

are. If needed, select , enter the first few letters of the country name on the keyboard, and select one country from the list of results.

27

1

2

3

4

5

6

Yaris iA_Navi_OM99Q50z_(U)

4.If needed, select a new city:

a.Select .

b.Start entering the name of the city on the keyboard.

c.Find the city you need:

•The most likely city name is always shown in the input field. To accept it, select .

•If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of

results before it appears automatically, select ). Select the city from the list.

28

Yaris iA_Navi_OM99Q50z_(U)

5.Enter the street name:

a.Select .

b.Start entering the street name on the keyboard.

c.Find the street you need:

•The most likely street name is always shown in the input field. To accept it, select .

•If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of

results before it appears automatically, select ). Select the street from the list.

29

1

2

3

4

5

6

Yaris iA_Navi_OM99Q50z_(U)