Toshiba EO1-19036M, EO1-19036, LS-780 User Manual

TEC Laser Scanner

LS-780 SERIES

Owner’s Manual

CE Compliance (for EU only)

This product complies with the requirements of EMC and Low Voltage Directives including their amendments.

Caution:

For U.S and Canada, use a UL Listed or Recognized, ITE or Class 2 power supply unit having a L-shaped output connector.

For Europe, use a CE marked ITE or Class 2 power supply unit having a L-shaped output connector.

Rated output of the power supply unit shall be 12 Vdc –10% 800 mA or more.

FCC Notice (for USA only)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Changes or modifications not expressly approved by manufacturer for compliance could void the user's authority to operate the equipment.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

ATTENTION

Ce produit est de classe A. Dans un environnement domestique, il peut causer des interférences radio. Auquel cas, l’utilisateur sera amené à prendre les mesures adéquates.

Warnung

Dies ist ein Klasse A Produkt. In einer örtlichen Umgebung kann dieses Gerät Funkstörungen verursachen.

Atención

Este es un producto de la clase A. En ambientes domésticos éste producto puede causar radio interferencias en cuyo caso el usuario deberá tomar las medldas oportunas.

VERWITTIGING

Dit is een klasse A produkt. Het gebruik hiervan kan radio interferenties veroorzaken die de gebruiker ertoe kunnen dwingen sommige maatregelen te moeten treffen.

Copyright©©20011997 bybyTOSHIBATEC CORPORATIONTEC CORPORATION AllAllRightsReserved

5702-6Ohito,-13 Nakameguro,Ohito-cho, TagataMeguro-gun,-ku, Tokyo,ShizuokaJAPAN-ken, JAPAN

Safety Summary	EO1-19036

Safety Summary

Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment.

Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified using the procedures described in this manual, turn off the power, unplug the machine, then contact your authorized TOSHIBA TEC representative for assistance.

Meanings of Each Symbol

This symbol indicates warning items (including cautions). Specific warning contents are drawn inside the symbol. (The symbol on the left indicates a general caution.)

This symbol indicates prohibited actions (prohibited items). Specific prohibited contents are drawn inside or near the symbol. (The symbol on the left indicates “no disassembling”.)

This symbol indicates actions which must be performed. Specific instructions are drawn inside or near thesymbol.

(The symbol on the left indicates “disconnect the power cord plug from the outlet”.)

			This indicates that there is the risk of death or serious injury if the
	WARNING machines are improperly handled contrary to this indication.
	Prohibited		Do not plug in or unplug the power	Any other than the		Do not use voltages other than the
				specified AC voltage
		cord plug with wet hands as this may			voltage (AC) specified on the rating
				is prohibited.
		cause electric shock.			plate, as this may cause fire or
					electric shock.

	Prohibited		If the machines share the same	Prohibited			Do not place metal objects or
		outlet with any other electrical			water-filled containers such as flower
		appliances which consume large			vases, flower pots or mugs, etc. on
		amounts of power, the voltage will			top of the machines. If metal objects
		fluctuate widely each time these			or spilled liquid enter the machines,
		appliances operate. Be sure to			this may cause fire or electric
		provide an exclusive outlet for the			shock.
		machine as this may cause fire or
		electric shock.
	Prohibited		Do not insert or drop metal,	Prohibited			Do not scratch, damage or modify
		flammable or other foreign objects into			the power cords. Also, do not place
		the machines through the ventilation			heavy objects on, pull on, or exces-
		slits, as this may cause fire or electric			sively bend the cords, as this may
		shock.			cause fire or electric shock.

Disconnect		If the machines are dropped or their	Disconnect		Continued use of the machines in an
the plug.	cabinets damaged, first turn off the		the plug.	abnormal condition such as when the
	power switches and disconnect the			machines are producing smoke or strange
	power cord plugs from the outlet, and			smells may cause fire or electric shock. In
	then contact your authorized			these cases, immediately turn off the power
	TOSHIABA TEC representative for			switches and disconnect the power cord
	assistance. Continued use of the			plugs from the outlet. Then, contact your
	machine in that condition may cause			authorized TOSHIABA TEC representative
	fire or electric shock.			for assistance.

(i)

Safety Summary	EO1-19036

				Disconnect		If foreign objects (metal fragments,	Disconnect			When unplugging the power
				the plug.	water, liquids) enter the machines,		the plug.	cords, be sure to hold and pull on
					first turn off the power switches and			the plug portion. Pulling on the cord
					disconnect the power cord plugs from			portion may cut or expose the inter-
					the outlet, and then contact your			nal wires and cause fire or electric
					authorized TOSHIABA TEC repre-			shock.
					sentative for assistance. Continued
					use of the machine in that condition
					may cause fire or electric shock.
				Connect a		Ensure that the equipment is	No			Do not remove covers, repair or
				grounding
					properly grounded. Extension cables		disassembling. modify the machine by yourself. It may
				wire.
					should also be grounded. Fire or			result in hazardous radiation expo-
					electric shock can occur on improp-			sure.
					erly grounded equipment.			Unauthorized modification is prohib-
								ited.

	Prohibited		Do not remove the glass surface (top	Prohibited		Using the laser beam with large
		window) except for cleaning, as using			mirrors or optical equipment will result
		the machine in this condition may			in increased risk to people’s eyes
		adversely affect people’s eyes.			and avoid viewing direct laser beam
					for a long time.

CAUTIONThis indicates that there is the risk of personal Injury or damage to objects if the machines are improperly handled contrary to this indication.

Precaution

The following precautions will help to ensure that this machine will continue to function correctly.

•Try to avoid locations that have the following adverse conditions:

*	Temperatures below 0 C and above 40 C	*	Direct sunlight
*	Shared power socket	*	Excessive vibration

•Do not subject the machine to sudden shocks.

•Clean the cover and Top Window, etc. by wiping with a dry cloth or a cloth soaked with detergent and wrung out thoroughly. Never use thinner or other volatile solvent for cleaning.

•At the end of the day, turn the power OFF, then clean and inspect the exterior of the machine.

•Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to cause mains interference.

•Do not place heavy objects on top of the machines, as these items may become unbalanced and fall causing injury.

•Do not lean against the machine. It may fall on you and could cause injury.

Request Regarding Maintenance

•Utilize our maintenance services.

After purchasing the machines, contact your authorized TOSHIBA TEC representative for assistance once per year.

•Our maintenance service performs the periodic checks and other work required to maintain the quality and performance of the machines, preventing accidents beforehand.

For details, please consult your authorized TOSHIBA TEC representative for assistance.

•Using insecticides and other chemicals

Do not expose the machines to insecticides or other volatile solvents, as this will deteriorate the cabinet or other parts or cause the paint to peel.

(ii)