Toshiba RAV-SP1104AT-E, RAV-SP1404AT-E, RAV-SP1104ATZG-E, RAV-SM804UT-E, RAV-SM1104UT-E User Manual

FILE NO. A07-003

SERVICE MANUAL

AIR-CONDITIONER

INDOOR UNIT

<DIGITAL INVERTER>

RAV-SM564UT-E RAV-SM1104UT-E

OUTDOOR UNIT

<SUPER DIGITAL INVERTER>

RAV-SP1104AT-E RAV-SP1104ATZ-E RAV-SP1104ATZG-E

SPLIT TYPE

RAV-SM804UT-E RAV-SM1404UT-E

RAV-SP1404AT-E RAV-SP1404ATZ-E RAV-SP1404ATZG-E

R410A

PRINTED IN JAPAN, Dec., 2007 ToMo

Adoption of New Refrigerant

This Air Conditioner is a new type which adopts a new refrigerant HFC (R410A) instead of the conventional refrigerant R22 in order to prevent destruction of the ozone layer.

WARNING

Cleaning of the air filter and other parts of the air filter involves dangerous work in high places, so be sure to have a service person do it. Do not attempt it yourself.

The cleaning diagram for the air filter is there for the service person, and not for the customer.

CONTENTS

SAFETY CAUTION ............................................................................................			4
1.	SPECIFICATIONS ......................................................................................		9
	1-1.	Indoor Unit...........................................................................................................	9
	1-2.	Outdoor Unit......................................................................................................	21
	1-3.	Operation Characteristic Curve .......................................................................	22
2.	CONSTRUCTION VIEWS (EXTERNAL VIEWS) ......................................		23
	2-1.	Indoor Unit.........................................................................................................	23
	2-2.	Outdoor Unit......................................................................................................	26
3.	SYSTEMATIC REFRIGERATING CYCLE DIAGRAM ..............................		28
	3-1.	Indoor Unit.........................................................................................................	28
	3-2.	Outdoor Unit......................................................................................................	29
	3-3. Systematic Diagram of Refrigerating Cycle ...................................................		29
4.	WIRING DIAGRAM ...................................................................................		30
	4-1.	Indoor Unit.........................................................................................................	30
	4-2. Outdoor Unit (Wiring Diagram) ........................................................................		31
5.	SPECIFICATIONS OF ELECTRICAL PARTS ..........................................		32
	5-1.	Indoor Unit.........................................................................................................	32
	5-2. Outdoor Unit (Parts Ratings) ...........................................................................		32
	5-3.	Accessory Separate Sold Parts .......................................................................	32

– 2 –

6. REFRIGERANT R410A ...........................................................................		33
6-1.	Safety During Installation/Servicing ...............................................................	33
6-2. Refrigerant Piping Installation .......................................................................		33
6-3.	Tools ..................................................................................................................	37
6-4.	Recharging of Refrigerant................................................................................	37
6-5.	Brazing of Pipes................................................................................................	38
6-6.	Instructions for Re-use Piping of R22 or R407C ............................................	40

7. INDOOR CONTROL CIRCUIT .................................................................		43
7-1.	Indoor Controller Block Diagram.....................................................................	43
7-2.	Control Specifications ......................................................................................	46
7-3.	Optional Connector Specifications of Indoor P.C. Board ..............................	58
7-4.	Indoor Print Circuit Board ................................................................................	59

8.	CIRCUIT CONFIGURATION AND CONTROL SPECIFICATIONS		........... 60
	8-1.	Outdoor Controls ..............................................................................................	60
	8-2.	Outline of Main Controls ..................................................................................	61
9.	TROUBLESHOOTING ..............................................................................		66
	9-1.	Summary of Troubleshooting...........................................................................	66
	9-2.	Troubleshooting ................................................................................................	68
10.	REPLACEMENT OF SERVICE P.C. BOARD ...........................................		99
	10-1.	Indoort Unit .......................................................................................................	99
	10-2.	Outdoor Unit....................................................................................................	104
11.	SETUP AT LOCAL SITE AND OTHERS ................................................		105
	11-1.	Indoor Unit.......................................................................................................	105
	11-2.	Setup at Local Site / Others ...........................................................................	116
	11-3.	How to Set up Central Control Address Number .........................................	118
	11-4.	Outdoor Unit....................................................................................................	122
12.	ADDRESS SETUP..................................................................................		129
	12-1.	Address Setup ................................................................................................	129
	12-2.	Address Setup & Group Control....................................................................	130
	12-3.	Address Setup ................................................................................................	132
13.	DETACHMENTS .....................................................................................		135
	13-1.	Indoor Unit......................................................................................................	135
	13-2.	Outdoor Unit....................................................................................................	145
14.	EXPLODED VIEWS AND PARTS LIST ..................................................		153
	14-1.	Indoor Unit.......................................................................................................	153
	14-2.	Outdoor Unit....................................................................................................	158

– 3 –

SAFETY CAUTION

The important contents concerned to the safety are described on the product itself and on this Service Manual.

Please read this Service Manual after understanding the described items thoroughly in the following contents (Indications/Illustrated marks), and keep them.

[Explanation of indications]

Indication	Explanation
DANGER	Indicates contents assumed that an imminent danger causing a death or serious injury of
	the repair engineers and the third parties when an incorrect work has been executed.

Indicates possibilities assumed that a danger causing a death or serious injury of the WARNING repair engineers, the third parties, and the users due to troubles of the product after work

when an incorrect work has been executed.

Indicates contents assumed that an injury or property damage ( ) may be caused on the CAUTION repair engineers, the third parties, and the users due to troubles of the product after work

when an incorrect work has been executed.

Property damage : Enlarged damage concerned to property, furniture, and domestic animal/pet

[Explanation of illustrated marks]

Mark	Explanation

Indicates prohibited items (Forbidden items to do)

The sentences near an illustrated mark describe the concrete prohibited contents.

Indicates mandatory items (Compulsory items to do)

The sentences near an illustrated mark describe the concrete mandatory contents.

Indicates cautions (Including danger/warning)

The sentences or illustration near or in an illustrated mark describe the concrete cautious contents.

[Confirmation of warning label on the main unit]

Confirm that labels are indicated on the specified positions (Refer to the Parts disassembly diagram (Outdoor unit).)

If removing the label during parts replace, stick it as the original.

DANGER

Turn “OFF” the breaker before removing the front panel and cabinet, otherwise an electric shock is caused by high voltage resulted in a death or injury.

During operation, a high voltage with 400V or higher of circuit ( ) at secondary circuit of the high-voltage transformer is applied.

If touching a high voltage with the naked hands or body, an electric shock is caused even if using an Turn off breaker. electric insulator.

: For details, refer to the electric wiring diagram.

When removing the front panel or cabinet, execute short-circuit and discharge between highvoltage capacitor terminals.

If discharge is not executed, an electric shock is caused by high voltage resulted in a death or injury.

Execute discharge After turning off the breaker, high voltage also keeps to apply to the high-voltage capacitor. between terminals.

Do not turn on the breaker under condition that the front panel and cabinet are removed.

An electric shock is caused by high voltage resulted in a death or injury.

Prohibition

– 4 –

WARNING

		Before troubleshooting or repair work, check the earth wire is connected to the earth
		terminals of the main unit, otherwise an electric shock is caused when a leak occurs.
	Check earth wires.	If the earth wire is not correctly connected, contact an electric engineer for rework.
		Do not modify the products.
		Do not also disassemble or modify the parts. It may cause a fire, electric shock or injury.
	Prohibition of modification.
		For spare parts, use those specified ( ).
		If unspecified parts are used, a fire or electric shock may be caused.
	Use specified parts.	: For details, refer to the parts list.
		Before troubleshooting or repair work, do not bring a third party (a child, etc.) except
		the repair engineers close to the equipment.
	Do not bring a child	It causes an injury with tools or disassembled parts.
		Please inform the users so that the third party (a child, etc.) does not approach the equipment.
	close to the equipment.
		Connect the cut-off lead wires with crimp contact, etc, put the closed end side upward
		and then apply a water-cut method, otherwise a leak or production of fire is caused at
		the users’ side.
	Insulating measures

When repairing the refrigerating cycle, take the following measures.

1)Be attentive to fire around the cycle. When using a gas stove, etc, be sure to put out fire before work; otherwise the oil mixed with refrigerant gas may catch fire.

	2) Do not use a welder in the closed room.
No fire	When using it without ventilation, carbon monoxide poisoning may be caused.

3)Do not bring inflammables close to the refrigerant cycle, otherwise fire of the welder may catch the inflammables.

Check the used refrigerant name and use tools and materials of the parts which match with it.

For the products which use R410A refrigerant, the refrigerant name is indicated at a position on the outdoor unit where is easy to see. To prevent miss-charging, the route of the service port is changed from one of the former R22.

		For an air conditioner which uses R410A, never use other refrigerant than R410A.
		For an air conditioner which uses other refrigerant (R22, etc.), never use R410A.
		If different types of refrigerant are mixed, abnormal high pressure generates in the
		refrigerating cycle and an injury due to breakage may be caused.
		Do not charge refrigerant additionally.
		If charging refrigerant additionally when refrigerant gas leaks, the refrigerant composition in
		the refrigerating cycle changes resulted in change of air conditioner characteristics or
		refrigerant over the specified standard amount is charged and an abnormal high pressure is
		applied to the inside of the refrigerating cycle resulted in cause of breakage or injury.
		Therefore if the refrigerant gas leaks, recover the refrigerant in the air conditioner, execute
	Refrigerant	vacuuming, and then newly recharge the specified amount of liquid refrigerant.
		In this time, never charge the refrigerant over the specified amount.
		When recharging the refrigerant in the refrigerating cycle, do not mix the refrigerant
		or air other than R410A into the specified refrigerant.
		If air or others is mixed with the refrigerant, abnormal high pressure generates in the
		refrigerating cycle resulted in cause of injury due to breakage.
		After installation work, check the refrigerant gas does not leak.
		If the refrigerant gas leaks in the room, poisonous gas generates when gas touches to fire
		such as fan heater, stove or cocking stove though the refrigerant gas itself is innocuous.
		Never recover the refrigerant into the outdoor unit.
		When the equipment is moved or repaired, be sure to recover the refrigerant with recovering
		device. The refrigerant cannot be recovered in the outdoor unit; otherwise a serious accident
		such as breakage or injury is caused.
		After repair work, surely assemble the disassembled parts, and connect and lead the
		removed wires as before. Perform the work so that the cabinet or panel does not
		catch the inner wires.
	Assembly/Cabling	If incorrect assembly or incorrect wire connection was done, a disaster such as a leak or fire
		is caused at user’s side.

– 5 –

WARNING

		After the work has finished, be sure to use an insulation tester set (500V Megger) to
		check the resistance is 2MΩ or more between the charge section and the non-charge
		metal section (Earth position).
	Insulator check	If the resistance value is low, a disaster such as a leak or electric shock is caused at user’s
		side.

When the refrigerant gas leaks during work, execute ventilation.

	If the refrigerant gas touches to a fire, poisonous gas generates.
	A case of leakage of the refrigerant and the closed room full with gas is dangerous because
Ventilation	a shortage of oxygen occurs. Be sure to execute ventilation.

When checking the circuit inevitably under condition of the power-ON, use rubber gloves and others not to touch to the charging section.

If touching to the charging section, an electric shock may be caused.

Be attentive to electric shock

When the refrigerant gas leaks, find up the leaked position and repair it surely.

If the leaked position cannot be found up and the repair work is interrupted, pump-down and tighten the service valve, otherwise the refrigerant gas may leak into the room.

The poisonous gas generates when gas touches to fire such as fan heater, stove or cocking stove though the refrigerant gas itself is innocuous.

	When installing equipment which includes a large amount of charged refrigerant such
	as a multi air conditioner in a sub-room, it is necessary that the density does not the
Compulsion	limit even if the refrigerant leaks.

If the refrigerant leaks and exceeds the limit density, an accident of shortage of oxygen is caused.

		For the installation/moving/reinstallation work, follow to the Installation Manual.
		If an incorrect installation is done, a trouble of the refrigerating cycle, water leak, electric
		shock or fire is caused.
		After repair work has finished, check there is no trouble.
		If check is not executed, a fire, electric shock or injury may be caused.
		For a check, turn off the power breaker.
	Check after rerair	After repair work (installation of front panel and cabinet) has finished, execute a test
		run to check there is no generation of smoke or abnormal sound.
		If check is not executed, a fire or an electric shock is caused.
		Before test run, install the front panel and cabinet.
		Check the following items after reinstallation.
		1) The earth wire is correctly connected.
		2) The power cord is not caught in the product.
	Check after reinstallation	3) There is no inclination or unsteadiness and the installation is stable.
		If check is not executed, a fire, an electric shock or an injury is caused.

CAUTION

	Be sure to put on gloves ( ) during repair work.
	If not putting on gloves, an injury may be caused with the parts, etc.
Put on gloves	( ) Heavy gloves such as work gloves
	When the power was turned on, start to work after the equipment has been
	sufficiently cooled.
Cooling check	As temperature of the compressor pipes and others became high due to cooling/heating
	operation, a burn may be caused.

– 6 –

• New Refrigerant (R410A)

This air conditioner adopts a new HFC type refrigerant (R410A) which does not deplete the ozone layer.

1. Safety Caution Concerned to New Refrigerant

The pressure of R410A is high 1.6 times of that of the former refrigerant (R22).

Accompanied with change of refrigerant, the refrigerating oil has been also changed.

Therefore, be sure that water, dust, the former refrigerant or the former refrigerating oil is not mixed into the refrigerating cycle of the air conditioner with new refrigerant during installation work or service work.

If an incorrect work or incorrect service is performed, there is a possibility to cause a serious accident.

Use the tools and materials exclusive to R410A to purpose a safe work.

2.Cautions on Installation/Service

1)Do not mix the other refrigerant or refrigerating oil.

For the tools exclusive to R410A, shapes of all the joints including the service port differ from those of the former refrigerant in order to prevent mixture of them.

2)As the use pressure of the new refrigerant is high, use material thickness of the pipe and tools which are specified for R410A.

3)In the installation time, use clean pipe materials and work with great attention so that water and others do not mix in because pipes are affected by impurities such as water, oxide scales, oil, etc.

Use the clean pipes.

Be sure to brazing with flowing nitrogen gas. (Never use gas other than nitrogen gas.)

4)For the earth protection, use a vacuum pump for air purge.

5)R410A refrigerant is azeotropic mixture type refrigerant.

Therefore use liquid type to charge the refrigerant. (If using gas for charging, composition of the refrigerant changes and then characteristics of the air conditioner change.)

3.Pipe Materials

For the refrigerant pipes, copper pipe and joints are mainly used.

It is necessary to select the most appropriate pipes to conform to the standard.

Use clean material in which impurities adhere inside of pipe or joint to a minimum.

1) Copper pipe

<Piping>

The pipe thickness, flare finishing size, flare nut and others differ according to a refrigerant type.

When us#ing a long copper pipe for R410A, it is recommended to select “Copper or copper-base pipe without seam” and one with bonded oil amount 40mg/10m or less.

Also do not use crushed, deformed, discolored (especially inside) pipes. (Impurities cause clogging of expansion valves and capillary tubes.)

<Flare nut>

Use the flare nuts which are attached to the air conditioner unit.

2)Joint

The flare joint and socket joint are used for joints of the copper pipe.

The joints are rarely used for installation of the air conditioner. However clear impurities when using them.

–7 –

4.Tools

1.Required Tools for R410A

Mixing of different types of oil may cause a trouble such as generation of sludge, clogging of capillary, etc. Accordingly, the tools to be used are classified into the following three types.

1)Tools exclusive for R410A (Those which cannot be used for conventional refrigerant (R22))

2)Tools exclusive for R410A, but can be also used for conventional refrigerant (R22)

3)Tools commonly used for R410A and for conventional refrigerant (R22)

The table below shows the tools exclusive for R410A and their interchangeability.

Tools exclusive for R410A (The following tools for R410A are required.)

Tools whose specifications are changed for R410A and their interchangeability

				R410A		Conventional air
				air conditioner installation		conditioner installation
	No.	Used tool	Usage
				Existence of	Whether conven-	Whether conventional
				new equipment	tional equipment	equipment can be used
				for R410A	can be used
	•	Flare tool	Pipe flaring	Yes	*(Note)	Yes
	‚	Copper pipe gauge for	Flaring by conventional	Yes	*(Note)	*(Note)
		adjusting projection margin	flare tool
	ƒ	Torque wrench	Connection of flare nut	Yes	No	No
	„	Gauge manifold	Evacuating, refrigerant	Yes	No	No
	…	Charge hose	charge, run check, etc.
	†	Vacuum pump adapter	Vacuum evacuating	Yes	No	Yes
	‡	Electronic balance for	Refrigerant charge	Yes	Yes	Yes
		refrigerant charging
	ˆ	Refrigerant cylinder	Refrigerant charge	Yes	No	No
	‰	Leakage detector	Gas leakage check	Yes	No	Yes
	Š	Charging cylinder	Refrigerant charge	No	No	No

(Note) When flaring is carried out for R410A using the conventional flare tools, adjustment of projection margin is necessary. For this adjustment, a copper pipe gauge, etc. are necessary.

General tools (Conventional tools can be used.)

In addition to the above exclusive tools, the following equipments which serve also for R22 are necessary as the general tools.

1)Vacuum pump

Use vacuum pump by

attaching vacuum pump adapter.

2)Torque wrench

3)Pipe cutter

4)Reamer

5)Pipe bender

6)Level vial

7)Screwdriver (+, –)

8)Spanner or Monkey wrench

9)Hole core drill

10)Hexagon wrench (Opposite side 4mm)

11)Tape measure

12)Metal saw

Also prepare the following equipments for other installation method and run check.

1)	Clamp meter	3)	IInsulation resistance tester (Megger)
2)	Thermometer	4)	Electroscope

– 8 –

1. SPECIFICATIONS

1-1. Indoor Unit

1-1-1. 4-Way Air Discharge Cassette Type

<Single type>

Model		Indoor unit		RAV-SM	564UT-E		804UT-E	1104UT-E	1404UT-E
		Outdoor unit		RAV-SP	562AT(Z)(ZG)-E		802AT(Z)(ZG)-E	1104AT(Z)(ZG)-E	1404AT(Z)(ZG)-E
Cooling capacity				(kW)	5.3		7.1	10.0	12.5
Heating capacity				(kW)	5.6		8.0	11.2	14.0
Power supply							1 phase 230V (220 – 240V) 50Hz
			Running current	(A)	7.17 – 6.57		8.95 – 8.21	10.36 – 9.49	14.66 – 13.44
			Power consumption(kW)		1.53		1.93	2.21	3.16
		Cooling	Power factor	(%)	97		98	97	98
			EER		3.46		3.68	4.52	3.96
			Energy efficiency class		A		A	A	A
			Energy rating		—		—	—	—
Electrical
			Running current	(A)	5.62 – 5.15		9.42 – 8.63	10.96 – 10.05	14.89 – 13.65
characteristics
			Power consumption(kW)		1.20		2.03	2.34	3.21
		Heating	Power factor	(%)	97		98	97	98
			COP		4.67		3.94	4.79	4.36
			Energy efficiency class		A		A	A	A
			Energy rating		—		—	—	—
		Maximum current			15.33		15.33	20.50	20.50
		Main unit					Zinc hot dipping steel plate
Appearance		Ceiling panel	Model			RBC-U31PG (W)-E, RBC-U31PG (WS)-E
		(Sold separately)	Panel color		W: Moon-white (2.5GY 9.0/0.5), WS: Stripe-white (2.5GY 9.0/0.5, (Gray: 8B 3/0.3))
			Height	(mm)	256		256	319	319
		Main unit	Width	(mm)	840		840	840	840
Outer			Depth	(mm)	840		840	840	840
dimension			Height	(mm)	30		30	30	30
		Ceiling panel
			Width	(mm)	950		950	950	950
		(Sold separately)
			Depth	(mm)	950		950	950	950
Total weight		Main unit		(kg)	20		20	24	24
		Ceiling panel (Sold separately)		(kg)	4.2		4.2	4.2	4.2
Heat exchanger							Finned tube
		Fan			Turbo fan		Turbo fan	Turbo fan	Turbo fan
Fan unit		Standard air flow	H/M/L	(m³/min.)	17.5/14.5/13.0		20.5/16.0/13.5	33.5/24.0/19.5	35.0/24.0/20.5
		Motor		(W)	14		20	68	72
Air filter							Standard filter attached (Long life filter)
Controller (Sold separately)							RBC-AMT32E, AS21E2, AX31U (W)-E
Sound pressure level			H/M/L	(dB•A)	32 / 29 / 28		35 / 31 / 28	43 / 38 / 33	44 / 38 / 34
Sound power level			H/M/L	(dB•A)	47 / 44 / 43		50 / 46 / 43	58 / 53 / 48	59 / 53 / 49
			Gas side	(mm)	12.7		15.9	15.9	15.9
Connecting pipe			Liquid side	(mm)	6.4		9.5	9.5	9.5
			Drain port	(mm)			VP25

: IEC standard, : AS standard

– 9 –

Model		Indoor unit		RAV-	SM564UT-E		SM804UT-E	SM1104UT-E		SM1404UT-E
		Outdoor unit		RAV-	SM563AT-E		SM803AT-E	SM1103AT-E		SM1403AT-E
Cooling capacity				(kW)	5.3		6.7	10.0		12.0
Heating capacity				(kW)	5.6		8.0	11.2		14.0
Power supply							1 phase 230V (220 – 240V) 50Hz
			Running current	(A)	7.89 – 7.24		9.97 – 9.12	14.61 – 13.40		17.62 – 16.14
			Power consumption(kW)		1.65		2.09	3.11		3.74
		Cooling	Power factor	(%)	95		95	97		96
			EER		3.21		3.21	3.22		3.21
			Energy efficiency class		A		A	A		A
			Energy rating		—		—	—		—
Electrical
			Running current	(A)	6.89 – 6.32		10.83 – 9.90	13.38 – 12.38		17.88 – 15.87
characteristics
			Power consumption(kW)		1.44		2.21	2.93		3.80
		Heating	Power factor	(%)	95		93	99		98
			COP		3.89		3.62	3.82		3.68
			Energy efficiency class		A		A	A		A
			Energy rating		—		—	—		—
		Maximum current			15.33		15.33	20.50		20.50
		Main unit					Zinc hot dipping steel plate
Appearance		Ceiling panel	Model			RBC-U31PG (W)-E, RBC-U31PG (WS)-E
		(Sold separately)	Panel color		W: Moon-white (2.5GY 9.0/0.5), WS: Stripe-white (2.5GY 9.0/0.5, (Gray: 8B 3/0.3))
			Height	(mm)	256		256	319		319
		Main unit	Width	(mm)	840		840	840		840
Outer			Depth	(mm)	840		840	840		840
dimension			Height	(mm)	30		30	30		30
		Ceiling panel
			Width	(mm)	950		950	950		950
		(Sold separately)
			Depth	(mm)	950		950	950		950
Total weight		Main unit		(kg)	24		24	24		24
		Ceiling panel (Sold separately)		(kg)	4.2		4.2	4.2		4.2
Heat exchanger							Finned tube
		Fan			Turbo fan		Turbo fan	Turbo fan		Turbo fan
Fan unit		Standard air flow	H/M/L	(m³/min.)	17.5/14.5/13.0		20.5/16.0/13.5	33.5/24.0/19.5		35.0/24.0/20.5
		Motor		(W)	14		20	68		72
Air filter							Standard filter attached (Long life filter)
Controller (Sold separately)							RBC-AMT32E, AS21E2, AX31U (W)-E
Sound pressure level			H/M/L	(dB•A)	32 / 29 / 28		35 / 31 / 28	43 / 38 / 33		44 / 38 / 34
Sound power level			H/M/L	(dB•A)	47 / 44 / 43		50 / 46 / 43	58 / 53 / 48		59 / 53 / 49
			Gas side	(mm)	12.7		15.9	15.9		15.9
Connecting pipe			Liquid side	(mm)	6.4		9.5	9.5		9.5
			Drain port	(mm)			VP25

: IEC standard, : AS standard

– 10 –

<Twin type>

		Indoor unit 1		RAV-		SM564UT-E	SM804UT-E
Model		Indoor unit 2		RAV-		SM564UT-E	SM804UT-E
		Outdoor unit		RAV-		SP1104AT(Z)(ZG)-E	SP1404AT(Z)(ZG)-E
Cooling capacity				(kW)		10.0	12.5
Heating capacity				(kW)		11.2	14.0
				Indoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
			Running current	(A)		10.36 – 9.49	14.66 – 13.44
			Power consumption	(kW)		2.21	3.16
		Cooling	Power factor	(%)		97	98
			EER			4.52	3.96
Electrical			Energy efficiency class			A	A
characteristics			Running current	(A)		10.96 – 10.05	14.89 – 13.65
			Power consumption	(kW)		2.34	3.21
		Heating	Power factor	(%)		97	98
			COP			4.79	4.36
			Energy efficiency class			A	A
		Fan				Turbo fan	Turbo fan
Fan unit		Standard air flow	H/M/L	(m³/min.)		17.5 / 14.5 / 13.0	20.5 / 16.0 / 13.5
		Motor		(W)		14	20
Sound pressure level			H/M/L	(dB•A)		32 / 29 / 28	35 / 31 / 28
Sound power level			H/M/L	(dB•A)		47 / 44 / 43	50 / 46 / 43
				Outdoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
		Standard length		(m)		7.5	7.5
		Min. length		(m)		3	3
Outer		Max. total length		(m)		50	50
dimension		Over 30m				40g/m (31m to 50m)	40g/m (31m to 50m)
		Height	Outdoor lower	(m)		30	30
		difference	Outdoor higher	(m)		30	30
		Fan				Propeller fan	Propeller fan
Fan unit		Standard air flow volume		(m³/min.)		101	103
		Motor		(W)		100 + 100	100 + 100
		Gas side	Main	(mm)		15.9	15.9
Connecting			Sub	(mm)		12.7	15.9
pipe		Liquid side	Main	(mm)		9.5	9.5
			Sub	(mm)		6.4	9.5
Sound pressure level			Cooling/Heating	(dB•A)		49 / 50	51 / 52
Sound power level			Cooling/Heating	(dB•A)		66 / 67	68 / 69

: IEC standard

– 11 –

		Indoor unit 1		RAV-		SM564UT-E	SM804UT-E
Model		Indoor unit 2		RAV-		SM564UT-E	SM804UT-E
		Outdoor unit		RAV-		SM1103AT-E	SM1403AT-E
Cooling capacity				(kW)		10.0	12.5
Heating capacity				(kW)		11.2	14.0
				Indoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
			Running current	(A)		14.40 – 13.20	20.57 – 18.97
			Power consumption	(kW)		3.11	4.09
		Cooling	Power factor	(%)		98	95
			EER			3.22	3.06
Electrical			Energy efficiency class			A	B
characteristics			Running current	(A)		14.40 – 13.20	17.74– 16.08
			Power consumption	(kW)		2.93	4.00
		Heating	Power factor	(%)		98	99
			COP			3.82	3.50
			Energy efficiency class			A	B
		Fan				Turbo fan	Turbo fan
Fan unit		Standard air flow	H/M/L	(m³/min.)		17.5 / 14.5 / 13.0	20.5 / 16.0 / 13.5
		Motor		(W)		14	20
Sound pressure level			H/M/L	(dB•A)		32 / 29 / 28	35 / 31 / 28
Sound power level			H/M/L	(dB•A)		47 / 44 / 43	50 / 46 / 43
				Outdoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
		Standard length		(m)		7.5	7.5
		Min. length		(m)		5	5
Outer		Max. total length		(m)		50	50
dimension		Over 30m				40g/m (31m to 50m)	40g/m (31m to 50m)
		Height	Outdoor lower	(m)		30	30
		difference	Outdoor higher	(m)		30	30
		Fan				Propeller fan	Propeller fan
Fan unit		Standard air flow volume		(m³/min.)		75	75
		Motor		(W)		63	100
		Gas side	Main	(mm)		15.9	15.9
Connecting			Sub	(mm)		12.7	15.9
pipe		Liquid side	Main	(mm)		9.5	9.5
			Sub	(mm)		6.4	9.5
Sound pressure level			Cooling/Heating	(dB•A)		53 / 54	54 / 54
Sound power level			Cooling/Heating	(dB•A)		70 / 71	71 / 71

: IEC standard

– 12 –

1-1-2. Concealed Duct Type

<Single type>

Model		Indoor unit		RAV-SM	562BT-E	802BT-E			1102BT-E		1402BT-E
		Outdoor unit		RAV-SP	562AT(Z)(ZG)-E	802AT(Z)(ZG)-E			1104AT(Z)(ZG)-E	1404AT(Z)(ZG)-E
Cooling capacity				(kW)	5.0	7.1		10.0			12.5
Heating capacity				(kW)	5.6	8.0		11.2			14.0
Power supply						1 phase 230V (220 – 240V) 50Hz
			Running current	(A)	6.51 – 5.97	9.74 – 8.93			13.78 – 12.63		17.76 – 16.28
			Power consumption(kW)		1.39	2.10		2.94			3.83
		Cooling	Power factor	(%)	97	98		97			98
			EER		3.60	3.38		3.40			3.26
			Energy efficiency class		A	A			A		A
			Energy rating		—	—			—		—
Electrical
			Running current	(A)	7.26 – 6.66	9.74 – 8.93			12.98 – 11.90		15.82 – 14.50
characteristics
			Power consumption(kW)		1.55	2.41		2.77			3.41
		Heating	Power factor	(%)	97	94		97			98
			COP		3.61	3.32		4.04			4.11
			Energy efficiency class		A	A			A		A
			Energy rating		—	—			—		—
		Maximum current			15.86	16.30		21.73			22.13
		Main unit				Zinc hot dipping steel plate
Appearance		Ceiling panel	Model				—
		(Sold separately)	Panel color				—
			Height	(mm)	320	320		320			320
		Main unit	Width	(mm)	700	1000		1350			1350
Outer			Depth	(mm)	800	800		800			800
dimension			Height	(mm)	—	—			—		—
		Ceiling panel
			Width	(mm)	—	—			—		—
		(Sold separately)
			Depth	(mm)	—	—			—		—
Total weight		Main unit		(kg)	30	39		54			54
		Ceiling panel (Sold separately)		(kg)	—	—			—		—
Heat exchanger						Finned tube
		Fan			Centrifugal	Centrifugal			Centrifugal		Centrifugal
Fan unit		Standard air flow	H/M/L	(m³/min.)	13.0/11.9/9.8	19.0/16.2/13.3			27.0/23.0/18.9		33.0/28.0/23.1
		Motor		(W)	120	120			120		120
						UFM11BFCE			UFM21BFCE
Air filter				TCB-	UFM21BE	UFM31BE			UFM41BE
					UFM61BE	UFM51BFCE			UFM61BFCE
						UFM71BE			UFM81BE
Controller (Sold separately)						RBC-AMT31E, AS21E2, AX21U(W)-E2
Sound pressure level			H/M/L	(dB•A)	40 / 37 / 33	40 / 37 / 34		42 / 39 / 36			44 / 41 / 38
Sound power level			H/M/L	(dB•A)	55 / 52 / 48	55 / 52 / 49		57 / 54 / 51			59 / 56 / 53
			Gas side	(mm)	12.7	15.9		15.9			15.9
Connecting pipe			Liquid side	(mm)	6.4	9.5		9.5			9.5
			Drain port	(mm)		VP25

: IEC standard, : AS standard

– 13 –

<Twin type>

		Indoor unit 1		RAV-		SM562BT-E	SM802BT-E
Model		Indoor unit 2		RAV-		SM562BT-E	SM802BT-E
		Outdoor unit		RAV-		SP1104AT(Z)(ZG)-E	SP1404AT(Z)(ZG)-E
Cooling capacity				(kW)		10.0	12.5
Heating capacity				(kW)		11.2	14.0
				Indoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
			Running current	(A)		13.78 – 12.63	17.76 – 16.28
			Power consumption	(kW)		2.94	3.83
		Cooling	Power factor	(%)		97	98
			EER			3.4	3.26
Electrical			Energy efficiency class			A	A
characteristics			Running current	(A)		12.98 – 11.90	15.82 – 14.50
			Power consumption	(kW)		2.77	3.41
		Heating	Power factor	(%)		97	98
			COP			4.04	4.11
			Energy efficiency class			A	A
		Fan				Centrifugal	Centrifugal
Fan unit		Standard air flow	H/M/L	(m³/min.)		13.0 / 11.9 / 9.8	19.0 / 16.2 / 13.3
		Motor		(W)		120	120
Sound pressure level			H/M/L	(dB•A)		40 / 37 / 33	40 / 37 / 34
Sound power level			H/M/L	(dB•A)		55 / 52 / 48	55 / 52 / 49
				Outdoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
		Standard length		(m)		7.5	7.5
		Min. length		(m)		3	3
Outer		Max. total length		(m)		50	50
dimension		Over 30m				40g/m (31m to 50m)	40g/m (31m to 50m)
		Height	Outdoor lower	(m)		30	30
		difference	Outdoor higher	(m)		30	30
		Fan				Propeller fan	Propeller fan
Fan unit		Standard air flow volume		(m³/min.)		101	103
		Motor		(W)		100 + 100	100 + 100
		Gas side	Main	(mm)		15.9	15.9
Connecting			Sub	(mm)		12.7	15.9
pipe		Liquid side	Main	(mm)		9.5	9.5
			Sub	(mm)		6.4	9.5
Sound pressure level			Cooling/Heating	(dB•A)		49 / 50	51 / 52
Sound power level			Cooling/Heating	(dB•A)		66 / 67	68 / 69

: IEC standard

– 14 –

1-1-3. Under Ceiling Type

<Single type>

Model		Indoor unit		RAV-SM	562CT-E	802CT-E		1102CT-E	1402CT-E
		Outdoor unit		RAV-SP	562AT(Z)(ZG)-E	802AT(Z)(ZG)-E		1104AT(Z)(ZG)-E	1404AT(Z)(ZG)-E
Cooling capacity				(kW)	5.0	7.1		10.0	12.5
Heating capacity				(kW)	5.6	8.0		11.2	14.0
Power supply						1 phase 230V (220 – 240V) 50Hz
			Running current	(A)	6.61 – 6.06	9.47 – 8.93		12.51 – 11.47	17.30 – 15.86
			Power consumption(kW)		1.41	2.1		2.67	3.73
		Cooling	Power factor	(%)	97	98		97	98
			EER		3.55	3.38		3.75	3.35
			Energy efficiency class		A	A		A	A
			Energy rating
Electrical
			Running current	(A)	7.03 – 6.44	10.20 – 9.35		12.28 – 11.25	16.93 – 15.52
characteristics
			Power consumption(kW)		1.50	2.20		2.62	3.65
		Heating	Power factor	(%)	97	98		97	98
			COP		3.73	3.64		4.27	3.84
			Energy efficiency class		A	A		A	A
			Energy rating		—	—		—	—
		Maximum current			15.48	15.90		21.35	21.35
		Main unit				Shine white
Appearance		Ceiling panel	Model				—
		(Sold separately)	Panel color				—
			Height	(mm)	210	210		210	210
		Main unit	Width	(mm)	910	1180		1595	1595
Outer			Depth	(mm)	680	680		680	680
dimension			Height	(mm)	—	—		—	—
		Ceiling panel
			Width	(mm)	—	—		—	—
		(Sold separately)
			Depth	(mm)	—	—		—	—
Total weight		Main unit		(kg)	21	25		33	33
		Ceiling panel (Sold separately)		(kg)	—	—		—	—
Heat exchanger						Finned tube
		Fan			Centrifugal	Centrifugal		Centrifugal	Centrifugal
Fan unit		Standard air flow	H/M/L	(m³/min.)	13.0/11.2/10.0	18.5/16.7/14.6		27.5/24.0/21.2	30.0/26.0/23.1
		Motor		(W)	60	60		120	120
Air filter						Attached main unit
Controller (Sold separately)					RBC-AMT31E, AS21E2, TCB-SC642TLE2, AX21UCE2
Sound pressure level			H/M/L	(dB•A)	36 / 33 / 30	38 / 36 / 33		41 / 38 / 36	43 / 40 / 37
Sound power level			H/M/L	(dB•A)	51 / 48 / 45	53 / 51 / 48		56 / 53 / 50	58 / 55 / 52
			Gas side	(mm)	12.7	15.9		15.9	15.9
Connecting pipe			Liquid side	(mm)	6.4	9.5		9.5	9.5
			Drain port	(mm)		VP25

: IEC standard, : AS standard

– 15 –

<Twin type>

		Indoor unit 1		RAV-		SM562CT-E	SM802CT-E
Model		Indoor unit 2		RAV-		SM562CT-E	SM802CT-E
		Outdoor unit		RAV-		SP1104AT(Z)(ZG)-E	SP1404A(Z)(ZG)-E
Cooling capacity				(kW)		10.0	12.5
Heating capacity				(kW)		11.2	14.0
				Indoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
			Running current	(A)		12.51 – 11.47	17.30 – 15.86
			Power consumption	(kW)		2.67	3.73
		Cooling	Power factor	(%)		97	98
			EER			3.75	3.35
Electrical			Energy efficiency class			A	A
characteristics			Running current	(A)		12.28 – 11.25	16.93 – 15.52
			Power consumption	(kW)		2.62	3.65
		Heating	Power factor	(%)		97	98
			COP			4.27	3.84
			Energy efficiency class			A	A
		Fan				Centrifugal	Centrifugal
Fan unit		Standard air flow	H/M/L	(m³/min.)		13.0 / 11.2 / 10.0	18.5 / 16.7 / 14.6
		Motor		(W)		60	60
Sound pressure level			H/M/L	(dB•A)		36 / 33 / 30	38 / 36 / 33
Sound power level			H/M/L	(dB•A)		51 / 48 / 45	53 / 51 / 48
				Outdoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
		Standard length		(m)		7.5	7.5
		Min. length		(m)		3	3
Outer		Max. total length		(m)		50	50
dimension		Over 30m				40g/m (31m to 50m)	40g/m (31m to 50m)
		Height	Outdoor lower	(m)		30	30
		difference	Outdoor higher	(m)		30	30
		Fan				Propeller fan	Propeller fan
Fan unit		Standard air flow volume		(m³/min.)		101	103
		Motor		(W)		100 + 100	100 + 100
		Gas side	Main	(mm)		15.9	15.9
Connecting			Sub	(mm)		12.7	15.9
pipe		Liquid side	Main	(mm)		9.5	9.5
			Sub	(mm)		6.4	9.5
Sound pressure level			Cooling/Heating	(dB•A)		49 / 50	51 / 52
Sound power level			Cooling/Heating	(dB•A)		66 / 67	68 / 69

: IEC standard

– 16 –

1-1-4. High Wall Type

<Single type>

Model		Indoor unit		RAV-	SM562KRT-E		SM802KRT-E
		Outdoor unit		RAV-	SP562AT(Z)(ZG)-E		SP802AT(Z)(ZG)-E
Cooling capacity				(kW)	5.0		6.9
Heating capacity				(kW)	5.6		8.0
Power supply					1 phase 230V (220 – 240V) 50Hz
			Running current	(A)	8.33 – 7.63		13.15 – 12.05
			Power consumption(kW)		1.39		2.4
		Cooling	Power factor	(%)	95		94
			EER		3.60		2.88
			Energy efficiency class		A		C
			Energy rating		—		—
Electrical
			Running current	(A)	8.14 – 7.46		12.91 – 11.84
characteristics
			Power consumption(kW)		1.55		2.4
		Heating	Power factor	(%)	95		94
			COP		3.61		3.33
			Energy efficiency class		A		C
			Energy rating		—		—
		Maximum current			15.34		15.47
		Main unit				Pure white
Appearance		Ceiling panel	Model			—
		(Sold separately)	Panel color			—
			Height	(mm)	298		298
		Main unit	Width	(mm)	998		998
Outer			Depth	(mm)	221		221
dimension			Height	(mm)	—		—
		Ceiling panel
			Width	(mm)	—		—
		(Sold separately)
			Depth	(mm)	—		—
Total weight		Main unit		(kg)	12		12
		Ceiling panel (Sold separately)		(kg)	—		—
Heat exchanger						Finned tube
		Fan			Cross flow fan		Cross flow fan
Fan unit		Standard air flow	H/M/L	(m³/min.)	14.0 / 12.5 / 10.7		18.5 / 14.6 / 12.2
		Motor		(W)	30		30
Air filter					Attached main unit
Controller (Sold separately)					RBC-AMT31E, AS21E2, TCB-SC642TLE2, AX21UCE2
					(FCU comes with WH-H2UE)
Sound pressure level			H/M/L	(dB•A)	39 / 36 / 33		45 / 41 / 36
Sound power level			H/M/L	(dB•A)	54 / 51 / 48		60 / 56 / 51
			Gas side	(mm)	12.7		15.9
Connecting pipe			Liquid side	(mm)	6.4		9.5
			Drain port	(mm)		VP16

: IEC standard, : AS standard

– 17 –

<Twin type>

		Indoor unit 1		RAV-		SM562KRT-E	SM802KRT-E
Model		Indoor unit 2		RAV-		SM562KRT-E	SM802KRT-E
		Outdoor unit		RAV-		SP1104AT(Z)(ZG)-E	SP1404AT(Z)(ZG)-E
Cooling capacity				(kW)		10.0	12.3
Heating capacity				(kW)		11.2	14.0
				Indoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
			Running current	(A)		12.98 – 11.90	18.00 – 16.50
			Power consumption	(kW)		2.77	3.88
		Cooling	Power factor	(%)		97	98
			EER			3.61	3.17
Electrical			Energy efficiency class			A	B
characteristics			Running current	(A)		13.12 – 12.03	17.76 – 16.28
			Power consumption	(kW)		2.80	3.83
		Heating	Power factor	(%)		97	98
			COP			4.00	3.66
			Energy efficiency class			A	A
		Fan				Cross flow fan	Cross flow fan
Fan unit		Standard air flow	H/M/L	(m³/min.)		14.0 / 12.5 / 10.7	18.5 / 14.6 / 12.2
		Motor		(W)		30	30
Sound pressure level			H/M/L	(dB•A)		39 / 36 / 33	45 / 41 / 36
Sound power level			H/M/L	(dB•A)		54 / 51 / 48	60 / 56 / 51
				Outdoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
		Standard length		(m)		7.5	7.5
		Min. length		(m)		3	3
Outer		Max. total length		(m)		50	50
dimension		Over 30m				40g/m (31m to 50m)	40g/m (31m to 50m)
		Height	Outdoor lower	(m)		30	30
		difference	Outdoor higher	(m)		30	30
		Fan				Propeller fan	Propeller fan
Fan unit		Standard air flow volume		(m³/min.)		101	103
		Motor		(W)		100 + 100	100 + 100
		Gas side	Main	(mm)		15.9	15.9
Connecting			Sub	(mm)		12.7	15.9
pipe		Liquid side	Main	(mm)		9.5	9.5
			Sub	(mm)		6.4	9.5
Sound pressure level			Cooling/Heating	(dB•A)		49 / 50	51 / 52
Sound power level			Cooling/Heating	(dB•A)		66 / 67	68 / 69

: IEC standard

– 18 –

1-1-5. Compact 4-Way Cassette (600 × 600) Type

<Single type>

Model		Indoor unit			RAV-SM562MUT-E
		Outdoor unit			RAV-SP562AT(Z)(ZG)-E
Cooling capacity				(kW)	5.0
Heating capacity				(kW)	5.6
Power supply					1 phase 230V
			Running current	(A)	6.6 – 7.15
			Power consumption(kW)		1.53
		Cooling	Power factor	(%)	97
			EER		3.27
			Energy efficiency class		A
			Energy rating		4.5
Electrical
			Running current	(A)	6.62 – 7.21
characteristics
			Power consumption(kW)		1.54
		Heating	Power factor	(%)	97
			COP		3.64
			Energy efficiency class		A
			Energy rating		4.5
		Maximum current			15.53
		Main unit			Zinc hot dipping steel plate
Appearance		Ceiling panel	Model		RBC-UM11PG(W)-E
		(Sold separately)	Panel color		Moon-white (Muncel 2.5GY 9.0 / 0.5)
			Height	(mm)	268
		Main unit	Width	(mm)	575
Outer			Depth	(mm)	575
dimension			Height	(mm)	27
		Ceiling panel
			Width	(mm)	700
		(Sold separately)
			Depth	(mm)	700
Total weight		Main unit		(kg)	17
		Ceiling panel (Sold separately)		(kg)	3
Heat exchanger					Finned tube
		Fan			Turbo fan
Fan unit		Standard air flow	H/M/L	(m³/min.)	13.3 / 11.2 / 9.1
		Motor		(W)	60
Air filter					—
Controller (Sold separately)					As per enclosure
Sound pressure level			H/M/L	(dB•A)	43 / 39 / 34
Sound power level			H/M/L	(dB•A)	58 / 54 / 49
			Gas side	(mm)	12.7
Connecting pipe			Liquid side	(mm)	6.4
			Drain port	(mm)	VP25

– 19 –

<Twin type>

		Indoor unit 1		RAV-		SM562MUT-E
Model		Indoor unit 2		RAV-		SM562MUT-E
		Outdoor unit		RAV-		SP1104(Z)(ZG)-E
Cooling capacity				(kW)		10.0
Heating capacity				(kW)		11.2
				Indoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
			Running current	(A)		12.51 – 11.47
			Power consumption	(kW)		2.67
		Cooling	Power factor	(%)		97
			EER			3.75
Electrical			Energy efficiency class			A
characteristics			Running current	(A)		12.51 – 11.47
			Power consumption	(kW)		2.67
		Heating	Power factor	(%)		97
			COP			4.19
			Energy efficiency class			A
		Fan				Turbo fan
Fan unit		Standard air flow	H/M/L	(m³/min.)		13.3 / 11.2 / 9.1
		Motor		(W)		60
Sound pressure level			H/M/L	(dB•A)		43 / 39 / 34
Sound power level			H/M/L	(dB•A)		58 / 54 / 49
				Outdoor unit
Power supply						1 phase 230V (220 – 240V) 50Hz
		Standard length		(m)		7.5
		Min. length		(m)		3
Outer		Max. total length		(m)		50
dimension		Over 30m				40g/m (31m to 50m)
		Height	Outdoor lower	(m)		30
		difference	Outdoor higher	(m)		30
		Fan				Propeller fan
Fan unit		Standard air flow volume		(m³/min.)		101
		Motor		(W)		100 + 100
		Gas side	Main	(mm)		15.9
Connecting			Sub	(mm)		12.7
pipe			Main	(mm)		9.5
		Liquid side
			Sub	(mm)		6.4
Sound pressure level			Cooling/Heating	(dB•A)		49 / 50
Sound power level			Cooling/Heating	(dB•A)		66 / 67

: IEC standard

– 20 –

1-2. Outdoor Unit

<Super Digital Inverter>

Model name		Outdoor unit		RAV-SP	562AT(Z)(ZG)-E		802AT(Z)(ZG)-E	1104AT(Z)(ZG)-E	1404AT(Z)(ZG)-E
Power supply							1 phase 230V (220 – 240V) 50Hz
						(Power exclusive to outdoor is required.)
		Type					Hermetic compressor
Compressor		Motor		(kW)	2		2	3.75		3.75
		Pole			4		4	4		4
Refrigerant charged				(kg)	1.5		2.1	3.1		3.1
Refrigerant control							Pulse motor valve
		Standard length		(m)	7.5		7.5	7.5		7.5
		Max. total length		(m)	50		50	75		75
Inter
		Additional refrigerant charge			20g/m		40g/m	40g/m		40g/m
connecting pipe
		under long piping connector			(21m to 50m)		(31m to 50m)	(31m to 75m)		(31m to 75m)
		Height	Outdoor lower	(m)	30		30	30		30
		difference	Outdoor higher	(m)	30		30	30		30
		Height		(mm)	795		795	1340		1340
Outer dimension		Width		(mm)	900		900	900		900
		Depth		(mm)	320		320	320		320
Appearance							Silky shade (Muncel 1Y8.5/0.5)
Total weight				(kg)	55		62	93		93
Heat exchanger							Finned tube
		Fan					Propeller fan
Fan unit		Standard air flow		(m³/h)	57		57	101		103
		Motor		(W)	63		63	100 + 100		100 + 100
		Gas side		(mm)	12.7		15.9	15.9		15.9
Connecting pipe
		Liquid side		(mm)	6.4		9.5	9.5		9.5
Sound pressure level			Cooling/Heating	(dB•A)	46 / 47		47 / 49	49 / 50		51 / 52
Sound power level			Cooling/Heating	(dB•A)	63 / 64		64 / 66	66 / 67		68 / 69
Outside air temperature, Cooling				(°C)			43 to –15°C
Outside air temperature, Heating				(°C)	15 to –15°C			15 to –20°C

– 21 –

1-3. Operation Characteristic Curve

• Operation characteristic curve <Super Digital Inverter>

RAV-SP1104AT-E, SP1404AT-E / RAV-SP1104ATZ-E, SP1404ATZ-E / RAV-SP1104ATZG-E, SP1404ATZG-E
<Cooling>						<Heating>
	22						22
	20						20
	18	RAV-SP1404					18	RAV-SP1104
	16						16
	14						14
(A)	12					(A)	12			RAV-SP1404
Current						Current
	10						10
	8						8
			RAV-SP1104
	6						6
	4		• Conditions				4		• Conditions
			Indoor : DB27˚C/WB19˚C						Indoor : DB20˚C
			Outdoor : DB35˚C						Outdoor : DB7˚C/WB6˚C
	2		Air flow : High				2		Air flow : High
			Pipe length : 7.5m						Pipe length : 7.5m
			230V						230V
	0	20	40	60	80		0	20	40	60	80
	0						0

Compressor speed (rps)

Compressor speed (rps)

• Capacity variation ratio according to temperature

RAV-SP1104AT-E, SP1404AT-E / RAV-SP1104ATZ-E, SP1404ATZ-E / RAV-SP1104ATZG-E, SP1404ATZG-E

<Cooling>												<Heating>
	105												120
	100												110
	95												100
	90												90
(%)	85											(%)	80
ratio	80											ratio	70
Capacity	70											Capacity	60
	75												50
													40
	65												30
	60					• Conditions							20		• Conditions
	55					Indoor : DB27˚C/WB19˚C									Indoor : DB20˚C
						Indoor air flow : High							10		Indoor air flow : High
						Pipe length : 7.5m									Pipe length : 7.5m
	50	33	34	35	36	37	38 39	40	41	42	43		0	-6	-4 -2 0	2	4	6	8	10
	32												-20 -18 -16 -14 -12 -10 -8

Outdoor temp. (˚C)

Outdoor temp. (˚C)

– 22 –

2. CONSTRUCTION VIEWS (EXTERNAL VIEWS)

2-1. Indoor Unit

RAV-SM564UT-E

860 to 910 Ceiling open dimension

Take-in port of wiring				30
	44
172	112	77	105
Refrigerant pipe connecting port			74
Ø6.4 (Liquid side)
Refrigerant pipe connecting port		397.5		105	337.5
Ø12.7 (Gas side)	157	263

		1000 or more
openCeilingdimension	1000 or more	15 or more
		moreor15
		An obstacle
		1000 or more

910		The space that is necessary
		for equipping and service
to				Standing 661or less
860			300
Bottom face of ceiling				Standing 850 or less
129	189
		Indoor unit		Bottom face of ceiling
Drain pipe		Drain upstanding size
connecting port
(Meterial : PP)

Bottom face of ceiling 129

77 10 5

74

Ø162

80	240	135 105 287.5	external dimension
		105	Unit
		207.5	840

106.5 72 241.5

For branch duct knockout square hole Ø150

Electric parts box

950 Panel external dimension

780 Hanging bolt pitch

323

408

Hanging bolt M10 or Ø3/8(procured by locally)

256

132

416.5	pitchboltHanging	dimension	74
			351		129 For branch duct
				105	77	knockout square
						hole Ø150
	690 ± 20	950Panel external	384 105		16.5	Ceiling panel
45˚						(sold separately)

105

Ø162	269

Z

57

64

	Bottom face
29	of ceiling

For branch duct knockout square hole Ø150

(2 positions)

For branch duct knockout square hole Ø150

Bottom face of ceiling

840 Unit external dimension

362.5 105 372.5

		74
		105
129	5	77

32	61
		.5	Knockout for simple
	28

0A for Ø100

155 187

Indoor unit

Bottom face of ceiling

Bottom face of ceiling

Z view

12

Unit : mm

– 23 –

RAV-SM804UT-E

Take-in port of wiring

44

172

112

Refrigerant pipe connecting port Ø9.5 (Liquid side)

Refrigerant pipe connecting port Ø15.9 (Gas side)

860 to 910 Ceiling open dimension

Bottom face of ceiling

30

77	105
	74

397.5 105 337.5

157 263

			15 or more		1000 or more
dimensionopen		more
		1000or	moreor15		An obstacle
					1000 or more
Ceiling			The space that is necessary
910			for equipping and service
					Standing 661or less
860 to				300
					Standing 850 or less
129	189	Indoor unit			Bottom face of ceiling

Drain upstanding size

Drain pipe connecting port (Meterial : PP)

Bottom face of ceiling

129
77 10 5	74

Ø162

	287.5
80
	105
240	135
	105
	207.5

106.5 72 241.5

For branch duct knockout square hole Ø150

Electric parts box

950 Panel external dimension

780 Hanging bolt pitch

323

dimension	408
840 Unit external

Hanging bolt M10 or Ø3/8 (procured by locally)

256

132

416.5	pitchboltHanging	dimension	74
			351		129 For branch duct
				105	77	knockout square
						hole Ø150
	690 ± 20	950Panel external	384 105		16.5	Ceiling panel
45˚						(sold separately)

105

Ø162	269

Z

57

	Bottom face
29	of ceiling

64

For branch duct knockout square hole Ø150

(2 positions)

For branch duct knockout square hole Ø150

Bottom face of ceiling

840 Unit external dimension

362.5 105 372.5

		74
		105
129	5	77

32	61
		.5
	28

Knockout for simple 0A for Ø100

155 187

Bottom face of ceiling

Z view

Indoor unit
Bottom face of ceiling	12

Unit : mm

– 24 –

RAV-SM1104UT-E, RAV-SM1404UT-E

860 to 910 Ceiling open dimension

Take-in port of wiring				30
	44
172	112	77	105
Refrigerant pipe connecting port			137
Ø9.5 (Liquid side)
Refrigerant pipe connecting port		397.5		105	337.5
Ø15.9 (Gas side)
	157	263

		15 or more		1000 or more
dimensionopen	1000or more
		moreor		An obstacle
				1000 or more
Ceiling		15
910		The space that is necessary
		for equipping and service
860 to			300	Standing 661 or less
129 189				Standing lessor850
Bottom face of ceiling
	Indoor unit			Bottom face of ceiling
Drain pipe		Drain upstanding size
connecting port

(Meterial : PP)

Bottom face of ceiling

129
77 10 5	137

Ø162

80	240 135 105 287.5	external dimension
	105	Unit
	207.5	840

105

Ø162

For branch duct

knockout square hole Ø150 (2 positions)

For branch duct knockout square hole Ø150

106.5 72 241.5

For branch duct knockout square hole Ø150

Electric parts box

950 Panel external dimension

780 Hanging bolt pitch

323

408

269

840 Unit external dimension

362.5 105 372.5

105 137

Hanging bolt M10 or Ø3/8 (procured by locally)

319

132

416.5		pitchboltHanging	dimension	137
				351		129	For branch duct
					105	77	knockout square
							hole Ø150
		690 ± 20	950Panel external	384 105		16.5	Ceiling panel
45˚							(sold separately)
							Bottom face
Z					29		of ceiling
		57		64
32	61
		.5
	28
			155		Knockout for simple 0A for Ø100
		187

Bottom face of ceiling

Bottom face of ceiling

129

5

77

Z view

Indoor unit

Bottom face of ceiling

Unit : mm

– 25 –

2-2. Outdoor Unit

RAV-SP1104AT-E, RAV-SP1404AT-E / RAV-SP1104ATZ-E, RAV-SP1404ATZ-E / RAV-SP1104ATZG-E, RAV-SP1404ATZG-E

		Note		——		Kockout hole
						Ø38
		Name	Refrigerant piping hole	1 Indoor/Outdoor unit	connecting wire inlet hole	2 Power supply inlet hole	Mounting bolt hole		(Ø12 × 17 U-shape hole)
		Mounting bolt hole	(Ø12 × 17 long hole)	12		40				legs Details of B legs	320
						40				Details of A
	(Ø25)	B legs			54				39	96
					48
	Drain hole		170				legs
							A
	60		34
							Air outlet		70	600	900
	200	Air inlet port	46					port
380					75							550
									383
										150
			port									52
			Air inlet
			128		118
						74					88)
	5.17			365				5.17
											Drain hole (Ø28 ×

1340

side)	side)	30
Refrigerant pipe connecting port (Ø9.5 flare at liquid	Refrigerant pipe connecting port (Ø15.9 flare at gas

581	74
534	121
	655

Unit : mm

				64
		5595		12
	1
		24
				151	400
			80
2	1		18
			94
		5595
	613
	605	155
2	1	5595	18
			80	135	Z
			178
			178	518
			178		327
			60	68	piping
581		70			downward
534		85
		360			Knockout for

837	7	viewsZ
		65

– 26 –

RAV-TWP30E2, RAV-TWP50E2 (Simultaneous Twin)

Inner diameter Ø C

	B
Inner	Inner
diameter Ø D	diameter Ø D

A

	Model (RBC-)		A	B	C	D
	TWP30E2	Liquid side	36	14	Ø9.5	Ø6.4
		Gas side	43	23	Ø15.9	Ø12.7
	TWP50E2	Liquid side	34	14	Ø9.5	Ø9.5
		Gas side	44	21	Ø15.9	Ø15.9

– 27 –

3. SYSTEMATIC REFRIGERATING CYCLE DIAGRAM

3-1. Indoor Unit

• Single type (Combination of 1 indoor unit and 1 outdoor unit)

(Indoor unit)

Distributor

(Strainer incorporated)

TCJ sensor

Strainer

Air heat

exchanger

TC sensor

Refrigerant pipe at liquid side (Outer dia : ØB)

Refrigerant pipe at gas side (Outer dia : ØA)

To outdoor unit

To outdoor unit

Dimension table

	Indoor unit		Outer diameter of refrigerant pipe
			Gas side ØA	Liquid side ØB
	SM56,	80 type	12.7	6.4
	SM110,	140 type	15.9	9.5

Capillary tube specifications

	Model AIU-	Inner dia. × Length × Q’ty
	SM56 type	Ø2 × 250 × 2, Ø2 × 350 × 1
		Ø2 × 700	× 1
	SM80 type	Ø2 × 250	× 3, Ø2 × 500 × 1
	SM110, 140 type	Ø2 × 200	× 1, Ø2 × 300 × 2
		Ø2 × 350	× 2, Ø2 × 700 × 1

• Twin type (Combination of 2 indoor units and 1 outdoor unit)

(Indoor unit A)

Distributor

(Strainer incorporated)

	TCJ sensor
	Strainer
	Air heat
TC sensor	exchanger
Refrigerant pipe	Refrigerant pipe
at liquid side	at gas side
(Outer dia : ØA)	(Outer dia : ØB)
Branch pipe

Refrigerant pipe at liquid side (Outer dia : ØC)

(Indoor unit B)

Distributor

(Strainer incorporated)

	TCJ sensor
	Strainer
	Air heat
TC sensor	exchanger
Refrigerant pipe	Refrigerant pipe
at liquid side	at gas side
(Outer dia : ØA)	(Outer dia : ØB)

Branch pipe

Refrigerant pipe at liquid side (Outer dia : ØD)

To outdoor unit						To outdoor unit
Indoor unit	Branch pipe RBC-	A	B	C	D
SM56 × 2	TWP30E2	6.4	12.7	9.5	15.9
SM80 × 2	TWP50E2	9.5	15.9	9.5	15.9

– 28 –

3-2. Outdoor Unit

RAV-SP1104AT-E, SP1104ATZ-E, SP1104ATZG-E, RAV-SP1404AT-E, SP1404ATZ-E, SP1404ATZG-E

	TS sensor	TO sensor
			PMV
		TL sensor
			Strainer
	Check joint		TE sensor	Capillary
	Cooling: High pressure
				Ø4 ×Ø3 (6 pcs.)
	Heating: Low pressure
		Heat exchanger	Distributor	Refrigerant pipe
	TD sensor	Ø8, 2 rows, 52 stages
		FP1.45, flat fin		at liquid side Ø9.5
				Packed valve
		In cooling operation
		In heating operation		Refrigerant pipe
			Strainer	at gas side Ø15.9
				Ball valve
	Muffler		Cooling: Low pressure
		Ø25 × L180	Heating: High pressure
	Ø25 × L210
Accumulator	Rotary compressor
(2500cc)	(DA422A3F-25M)

3-3. Systematic Diagram of Refrigerating Cycle

RAV-SP1104AT-E, RAV-SP1104ATZ-E, RAV-SP1104ATZG-E

			Pressure				Pipe surface temperature (°C)				Compressor		Indoor/Outdoor
		(MPa)		(kg/cm²g)		Discharge	Suction	Indoor heat	Outdoor heat		drive revolution	Indoor	temp. conditions
													(DB/WB) (°C)
								exchanger	exchanger		frequency	fan
											(rps)
		Pd	Ps	Pd	Ps	(TD)	(TS)	(TC)	(TL)	(TE)			Indoor	Outdoor
	Standard	2.57	0.99	26.2	10.1	66	14	12	44	38	38	HIGH	27/19	35/–
Cooling	Overload	3.30	1.09	33.7	11.1	78	9	13	49	43	53	HIGH	32/24	43/–
	Low load	1.74	0.75	17.8	7.7	46	7	5	32	25	21	LOW	18/15.5	–5/–
	Standard	2.32	0.73	23.7	7.4	65	3	39	2	3	43	HIGH	20/–	7/6
Heating	Overload	3.22	1.17	32.9	11.9	73	19	54	14	15	26	LOW	30/–	24/18
	Low load	2.17	0.30	22.1	3.1	87	–15	38	–14	–13	71	HIGH	15/–	–15/–

*This compressor has 4-pole motor. The value when compressor frequency (Hz) is measured by a clamp meter becomes 2 times of No. of compressor revolutions (rps).

RAV-SP1404AT-E, RAV-SP1404ATZ-E, RAV-SP1404ATZG-E

			Pressure				Pipe surface temperature (°C)				Compressor		Indoor/Outdoor
		(MPa)		(kg/cm²g)		Discharge	Suction	Indoor heat	Outdoor heat		drive revolution	Indoor	temp. conditions
													(DB/WB) (°C)
								exchanger	exchanger		frequency	fan
											(rps)
		Pd	Ps	Pd	Ps	(TD)	(TS)	(TC)	(TL)	(TE)			Indoor	Outdoor
	Standard	2.72	0.90	27.8	9.2	73	12	10	46	38	51	HIGH	27/19	35/–
Cooling	Overload	3.34	1.07	34.1	10.9	80	9	13	51	45	55	HIGH	32/24	43/–
	Low load	1.75	0.76	17.9	7.8	47	8	6	33	25	21	LOW	18/15.5	–5/–
	Standard	2.59	0.69	26.4	7.0	75	3	43	2	2	53	HIGH	20/–	7/6
Heating	Overload	3.13	1.05	31.9	10.7	72	16	53	12	13	26	LOW	30/–	24/18
	Low load	2.40	0.21	24.5	2.1	97	–22	42	–19	–18	90	HIGH	15/–	–15/–

*This compressor has 4-pole motor. The value when compressor frequency (Hz) is measured by a clamp meter becomes two times of No. of compressor revolutions (rps).

–29 –

4. WIRING DIAGRAM

4-1. Indoor Unit

RAV-SM564UT-E, RAV-SM804UT-E, RAV-SM1104UT-E, RAV-SM1404UT-E

RED

WHI

BLK

Indoor unit earth screw

1 2 3

						LM1							LM3					LM2					LM4
		FM			1	2	3	4	5			1	2	3	4	5	1	2	3	4	5	1	2	3	4	5
					1	2	3	4	5			1	2	3	4	5	1	2	3	4	5	1	2	3	4	5
					(BLU)						(WHI)						(RED)					(BLK)				DM
																															FS
		1	3	5	CN333		1	2	3	4	5	6	7	8	9	10 11 12 13 14 15 16 17 18 19 20										1	2	1	2	3
		1	3	5	(WHI)		1	2	3	4	5	6	7	8	9 10 11 12 13 14 15 16 17 18 19 20											1	2	1	2	3
																	CN510									CN504		CN34
												Motor drive					(WHI)									(WHI)		(RED)
																												CN104			1	1
												circuit
																												(YEL)			2	2
3	3	CN334																														TA
2	2																											CN102			1	1
1	1	(WHI)																										(RED)			2	2
																																TCJ
																												CN101			1	1
		Fuse, F01														Fuse, F02												(BLK)			2	2
																																TC
		T6.3A, 250V~						~				+			T3.15A, 250V~
1	1																					Power				DC20V		CN519			1
																															2
																					supply					DC15V		(WHI)
																										DC12V					3
3	3																					circuit
		CN67						~				–														DC7V					4
5	5	(BLK)																										CN508			1
																												(RED)			2
		P01							Control P.C. Board																			CN80			1
BLK											for Indoor Unit																				2
																												(GRN)			3
												MCC-1570
																												CN73			1
																																(EXCT)
		CN66																										(RED)			2
	1
	2	(WHI)																										CN70			1
																												(WHI)			2
		CN41			CN309					CN61				CN32				CN60						CN50			CN20
		(BLU)			(YEL)					(YEL)				(WHI)				(WHI)						(WHI)			(BLU)

1	2	3	1	3	1	2	3	4	5	6	1	2	1	2	3	4	5	6	1	2	3	4	5	1	2	3	4	5
1		3					(T10)				(Fan drive)								1	2	3	4	5

	BLK	BLK	CN51	1	2	3	4	5
			(RED) 1		2	3	4	5
	A	B		P.C. board
				MCC-1440

1 2 3

Serial signal

L N

Signal phase 220–240V~, 50Hz

Outdoor unit

Outdoor unit earth screw

1 2

1 2

A B

CN001 (WHI)

Wired	Adapter for
remote controller	wireless remote controller

Color

Identification

BLK : BLACK

BLU : BLUE

RED : RED

GRN : GREEN

WHI : WHITE

YEL : YELLOW

		1		2
		1		2
	Terminal
	for central U3			U4
remote controller
Connection interface
	(Option)
	Symbol					Parts name
	FM					Fan Motor
	TA					Indoor temp. sensor
	TC, TCJ					Temp. sensor
	LM1, LM2, LM3, LM4					Louver motor
	DM					Drain pump Motor
	FS					Float Switch

– 30 –