Toshiba M7463-55, M7453-42, M7453-47, M7463-42, M7453-55 User Manual

...
0 (0)

USER MANUAL

M74** Digital Series

L74** Digital Series

English

Contents

 

INSTALLING YOUR TV

 

Safety Precautions .......................................................

5

Installation and important information ..........................

6

The remote control .......................................................

8

Inserting batteries and effective range ..................

8

CONNECTING YOUR TV

 

Connecting external equipment....................................

9

Connecting an HDMI® device.....................................

10

To connect an HDMI device................................

10

HDMI’s ARC (Audio Return Channel) feature.....

10

Connecting an HDMI CEC Control compatible

 

device ......................................................................

11

Connecting a computer ..............................................

12

To connect a PC to the HDMI terminal ...............

12

To connect a PC to the RGB/PC terminal...........

12

Connecting a home network.......................................

13

To connect the TV to a home network - Wired....

13

To connect the TV to a home network with an

 

internet connection - Wireless..........................

13

To connect the TV to the Device with

 

Intel® WiDi / wireless display............................

14

Controls and input connections ..................................

15

Switching on........................................................

15

Using the TV controls and connections...............

15

Using the menu system.......................................

16

SETTING UP YOUR TV

 

Startup Application .....................................................

17

Quick Setup.........................................................

17

Ant/Cable/Satellite (if available) ..........................

22

Satellite Settings .................................................

23

Auto Tuning.........................................................

24

ATV Manual Tuning....................................................

25

Tuning .................................................................

25

Skip .....................................................................

26

Sorting positions..................................................

27

DTV Manual Tuning ...................................................

27

Manual Tuning ....................................................

27

Manual Tuning for DVB-C ...................................

28

Manual Tuning for DVB-S ...................................

28

Antenna Amplifier................................................

28

DTV Settings ..............................................................

28

Channels (Antenna/Cable)..................................

28

Channels (Satellite).............................................

29

Standby Channel Update ....................................

30

Location setting ...................................................

30

Analogue switch-off.............................................

30

Data Transfer ......................................................

30

CONTROLS AND FEATURES

 

General controls .........................................................

31

Quick Menu .........................................................

31

Selecting channels ..............................................

31

The Time Display – analogue only.....................

32

Stereo and Bilingual transmissions .....................

32

Using 3D functions .....................................................

32

Viewing 3D images .............................................

32

Switching display mode or selecting

 

3D format .........................................................

33

Setting the auto start mode.................................

34

Adjusting 2D to 3D Depth ...................................

35

Setting the 3D PIN code .....................................

35

Setting 3D Start Message ...................................

35

Setting 3D Lock...................................................

35

Setting 3D Timer Lock ........................................

35

Setting Enable 3D Timer.....................................

36

3D Test Pattern...................................................

36

Displaying 3D Important Info...............................

36

Switching left and right images ...........................

36

Sound controls ...........................................................

36

Volume controls and sound mute .......................

36

Sound Navi .........................................................

36

Sound Mode........................................................

36

Graphic Equaliser ...............................................

36

TruDialog™.........................................................

36

Surround .............................................................

37

Sound Separation Effect.....................................

37

TruVolume™.......................................................

37

Dynamic Range Control......................................

37

Balance ...............................................................

37

Dual.....................................................................

37

Audio Level Offset...............................................

38

TV Speakers .......................................................

38

Headphone Level................................................

38

Audio Description................................................

38

Widescreen viewing ...................................................

39

Picture controls ..........................................................

41

Picture Mode.......................................................

41

Reset...................................................................

41

Picture preferences.............................................

41

ColourMaster ......................................................

41

Base Colour Adjustment .....................................

42

Colour Temperature............................................

42

Auto Brightness Sensor ......................................

42

Active Backlight Control ......................................

42

Black/White Level ...............................................

42

MPEG NR – Noise Reduction.............................

43

DNR – Digital Noise Reduction...........................

43

Resolution +........................................................

43

Scene +...............................................................

43

ClearScan ...........................................................

43

3D Judder Cancellation.......................................

43

Resetting the advanced picture settings .............

43

Expert Picture Settings .......................................

44

Automatic Format (Widescreen) .........................

45

4:3 Stretch...........................................................

45

Picture Position...................................................

46

Picture still...........................................................

46

HDMI Information Display ...................................

46

Wireless LAN Information ..........................................

46

Setting up the Network...............................................

48

Wireless Setup....................................................

48

Advanced Network Setup ...................................

51

2

DNS Setup ..........................................................

52

Network Connection Test....................................

52

Using the software keyboard...............................

53

Network Device Setup................................................

53

Apps Control Profile ............................................

53

External Record Control......................................

54

Companion Device Control .................................

54

Media Renderer Setup ........................................

54

Device Name Setup ............................................

55

USB HDD Record Function........................................

55

Setting up the USB HDD for recording................

56

To record DTV programmes

 

(One Touch Recording)....................................

56

Auto Recording ...................................................

56

How to set recordings via the Programme

 

Guide................................................................

57

To check, edit or delete scheduling

 

information .......................................................

59

To view a recorded programme ..........................

60

Operations from the My TV Library screen .........

60

Recording Setup .................................................

61

Scheduling priority...............................................

62

Using the Smart TV Cloud services ...........................

63

Using Web Browser ............................................

63

Using Hybrid TV Standard (if available) .....................

64

Using Intel® WiDi / wireless display............................

65

Intel® WiDi / wireless display Device Name........

65

Device List...........................................................

66

Using My Contents .....................................................

66

Basic operation ...................................................

67

Viewing photo files

 

(on a media server or USB device) ..................

68

Viewing movie files

 

(on a media server or USB device) ..................

70

Playing music files

 

(on a media server or USB device) ..................

73

Other features ............................................................

74

Panel Lock ..........................................................

74

Blue Screen.........................................................

74

Netflix® ................................................................

74

The timers ..................................................................

75

My TV Timer List – digital only...........................

75

On Timer .............................................................

75

Sleep Timer.........................................................

75

Energy Saving Settings ..............................................

76

Automatic Power Down.......................................

76

No Signal Power Down .......................................

76

Digital on-screen information......................................

76

Information ..........................................................

76

Using EPG (Electronic Programme Guide) ................

77

Using Broadcast Guide .......................................

77

Genre selection/searching ..................................

78

Digital settings – parental control ...............................

78

Parental PIN Setup .............................................

78

Parental Setup ....................................................

79

Digital settings – Channel Options .............................

79

Selecting favourite channels ...............................

79

Favourite Channel List ........................................

79

Skip channels......................................................

80

Locking channels ................................................

80

Digital settings – other settings ..................................

80

Subtitles ..............................................................

80

DVB Character Set .............................................

80

Audio languages .................................................

80

Common Interface ..............................................

81

Stored CICAM PIN..............................................

81

Software Upgrade and Licences ................................

81

Searching for New Software ...............................

81

Network Upgrade ................................................

81

Software Licences...............................................

82

System Information and Reset TV .............................

82

System Information .............................................

82

Reset TV .............................................................

82

PC Settings ................................................................

83

Horizontal and Vertical Position ..........................

83

Clock Phase........................................................

83

Sampling Clock ...................................................

83

Reset...................................................................

83

Input selection and AV connections ...........................

84

Input selection.....................................................

84

Labelling video input sources..............................

84

Digital Audio Output ............................................

85

Using HDMI CEC Control...........................................

86

Enable HDMI CEC Control .................................

86

TV Auto Power....................................................

86

Auto Standby ......................................................

86

Amplifier Control .................................................

86

Initial Speaker Setting.........................................

86

HDMI CEC Control input source selection..........

87

HDMI CEC Control one touch play .....................

87

HDMI CEC Control system standby....................

87

Using MHL TV function ..............................................

88

Connecting an MHL-compatible device ..............

88

Operating an MHL-compatible device.................

88

MHL Setup ..........................................................

88

TEXT SERVICES

 

Text services ..............................................................

89

Selecting modes .................................................

89

Text information ..................................................

89

Navigating pages using Auto ..............................

89

Navigating pages using LIST ..............................

89

Control buttons....................................................

90

PROBLEM SOLVING

 

Questions and Answers ..........................................

91

INFORMATION

 

Information .................................................................

94

Licence information ....................................................

99

Cautions and other information for 3D .....................

101

Specifications and accessories ................................

103

English

3

English

During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance:

If your TV is connected to the internet, firmware will be automatically made available.

If your TV is not connected to the internet, you can download the latest version of firmware from www.toshiba-om.net/firmware.php

*Some features are limited due to local legislation and may not be available in all countries.

4

INSTALLING YOUR TV

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.

Air Circulation

Leave more than 10 cm clearance around all the edges when wall mounting the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided. For wall mounted positions at least 2.5 cm gap was retained from the wall and the 10 cm was kept clear around all edges of the TV.

Heat Damage

Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5 °C min. and 35 °C max.

Mains Supply

The mains supply required for this equipment is 220-240 V AC 50 Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead.

DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance.

IF IN DOUBT, PLEASE CONSULT A COMPETENT ELECTRICIAN.

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.

THE MAINS PLUG IS USED AS THE DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.

Do not

DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.

WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all times.

DO NOT use makeshift stands and NEVER fix legs with wood screws.

DO NOT leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, and make sure your family knows how to do this. Special arrangements may need to be made for people with disabilities.

DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.

Do

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

WARNING: To prevent injury, this apparatus must be securely attached in accordance with the installation instructions. See page 6.

DO be careful with glass panels or stands on equipment. DO use a soft, dry cloth to clean the unit.

DO NOT push/pull CI CAM at a tilt to prevent breakdown of COMMON INTERFACE.

WARNING: Excessive sound pressure from earphones or headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially children, push or hit the screen and cabinet back, or push anything into holes, slots or any other openings in the case. These actions will damage screen or internal parts.

NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry.

English

5

English

INSTALLING YOUR TV

Installation and important information

Where to install

 

 

 

 

 

 

 

 

 

 

 

Locate the television away from direct sunlight and strong

 

 

 

 

 

 

 

 

 

 

 

lights. Soft, indirect lighting is recommended for comfortable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

viewing. Use curtains or blinds to prevent direct sunlight

 

 

 

 

 

 

 

 

 

 

 

falling on the screen.

Stand style is dependent on model

Place the TV on a stable, level surface that can support

the weight of the TV. In order to prevent injury and maintain stability of this apparatus, it is recommended to secure the TV using the fixings on the stand strap or “P” clips.

The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.

Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal. Studies indicate that plastics may weaken and crack over time from the combination effects of chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could

result in serious injury and/or permanent damage to TV and TV pedestal.

When using a Wall Bracket

Use a wall bracket appropriate for the size and weight of the LCD TV.

Two people are required for installation.

Install a wall-mount from another manufacturer.

1Unplug and remove any cables and/or other component connectors from the rear of the TV.

2Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.

3Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

4Always use the screws supplied or recommended by the wall mount manufacturer.

Removing the Pedestal Stand:

1Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.

NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

2Remove the cover and screws.

Screws

3Once you have removed all screws holding the pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV.

When using MHL (Mobile High-definition Link)

Interoperability with MHL devices of other manufacturers is not guaranteed.

Toshiba does not provide any guarantee, therefore, against operational failure such as that described below when an MHL source is connected to the TV.

-No picture or sound

-Some of the functions do not work by remote operation from the TV

If the MHL does not work properly, also contact the manufacturer of the source device for advice on its use.

6

INSTALLING YOUR TV

Please take note

The digital reception function of this television is only effective in the countries listed in the “Country” section of the “Installation” menu. Depending on country/area, some of this television’s functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of other size modes (e.g. Super Live) will prevent permanent retention.

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:

i)Fire;

ii)Earthquake;

iii)Accidental damage;

iv)Intentional misuse of the product;

v)Use of the product in improper conditions;

vi)Loss and/or damage caused to the product whilst in the possession of a third party;

vii)Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual;

viii)Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.

English

When Using a USB Hard Drive (HDD)

The recording function has been designed for private use and entertainment in your home environment. Please note that any commercial use of the recording function could lead to copyright infringement of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties.

Before recording to a device connected to the TV, make a test recording and check the recording performance.

Programmes that are prohibited from copying due to copyright protection cannot be recorded.

Toshiba shall not be liable for compensation or incidental damages of any kind whatsoever resulting from content that was not properly recorded on the recording device or that was modified or lost.

Toshiba shall not be liable for damages of any kind whatsoever (breakdown of the recording device, modification or loss of the recorded content, etc.) resulting from malfunction, operating failure or incorrect operation due to combining with another connected device.

If you connect a USB HDD that has been used with a PC or another TV, only programmes which are recorded using this TV can be playback.

Switch the TV to standby before you disconnect the USB HDD.

Not doing so may result in loss of the recorded data or malfunction of the USB HDD.

Please note that recording on the USB HDD is no longer playable after the TV’s main-board is exchanged during service.

To ensure protection of your personal data Toshiba recommends that you reset all TV settings when you recycle your TV or transfer to others. To reset your TV please access via menu settings, selecting ‘Reset TV’. See owner’s manual page 82 for further details.

7

English

INSTALLING YOUR TV

The remote control

19

- Accesses the Smart TV Cloud Home

 

 

20

- Accesses to premium content available

Simple at-a-glance reference of your remote control.

 

online

1

 

21

To access the on-screen Menu

3

22

To display the digital on-screen Programme Guide

2

23

 

To page up, down, left or right

4

6

24

When using menus, the arrows move the cursor on the

5

8

 

screen up, down, left or right. Press OK to confirm your

7

9

 

selection

10

 

25

To return to previous Menu

 

26

To exit menus and applications

 

 

11

12

27

When in TV mode:

 

D Analogue time display

13

15

 

When in Text mode:

14

 

A

To reveal concealed text

16

17

 

B

To hold a wanted page

 

C

To enlarge text display size

18

20

 

D To erase Text pages temporarily when you

19

 

 

 

are viewing in teletext mode.

21

22

 

During Playback:

23

24

 

c

To PLAY

25

 

v

To STOP

26

 

W

To PAUSE

 

 

Z

To SKIP-BACK

27

 

 

CC

To REWIND

 

 

cc

To FAST FORWARD

28

30

 

z

To SKIP FORWARD

 

 

 

29

28

To access the analogue or digital Channel List

31

 

29

To call up text services

 

 

30

To record DTV programmes

 

 

31

Colour buttons: Text and interactive service control

 

 

 

buttons

 

1For On/Standby mode

2To select input sources

3To select TV Mode

4Selectable Picture

5Widescreen viewing

6Picture still

7Digital Subtitles or Analogue TEXT Subtitle pages if available

8sStereo/bilingual transmissions

9To switch between 2D / 3D modes

10Number buttons

11Switch the Audio Description On/Off

12To return to previous channel

13To display on-screen information

To access the index page in Text mode

14To alter the TV volume

15To change programme positions To change TEXT pages

16To mute the TV sound

17To access Quick Menu

18- Accesses the Search Portal

Inserting batteries and effective range

Remove the back cover to reveal the battery

compartment and make sure the batteries are inserted the proper way. Suitable battery

types for this remote control

are AAA, IEC R03 1.5 V.

Do not combine a used, old

battery with a new one or mix battery types. Remove

exhausted batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 100 of this manual.

Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing.

8

CONNECTING YOUR TV

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.

ILLUSTRATION SHOWS 42L.

DVB Common Interface

 

(for Conditional Access

 

Module (CAM))

 

USB 2

 

HDMI 3 (MHL)

 

HDMI 2

Power cord

HDMI 1 (ARC)

Headphones

 

SCART (EXT 1)

USB 1

 

HDMI 4 INPUT

COMPONENT VIDEO/AUDIO INPUT

 

VIDEO/AUDIO INPUT (Y/L/R) (EXT 2)

LAN port

Aerial

 

DIGITAL AUDIO OUTPUT (OPTICAL)

LNB IN SATELLITE ANTENNA

 

(M746*/L746* series only)

RGB/PC INPUT

 

Aerial Cable

Decoder*

* A Decoder can be digital Satellite, free to air or any other compatible decoder / recorder.

Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . .

Connect the aerial to the socket on the rear of the TV. If you use a decoder and/or a media recorder, it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the TV.

Satellite cable: . . . . . . . . . . . . . . . . . . . . . . .

Connect the LNB from the satellite dish to the SATELLITE ANTENNA socket on the TV. You can receive TV, radio, interactive TV, and HD TV with clear reception.

SCART leads: . . . . . . . . . . . . . . . . . . . . . . . .

Connect the media recorder IN/OUT socket to the television.

Connect the decoder TV socket to the television.

Before running Auto Tuning, put your decoder and media recorder to Standby.

The RCA sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.

When connecting the VIDEO/AUDIO devices, connect those cables to Y/L/R sockets.

The Digital Audio Output socket enables the connection of a suitable surround sound system.

NOTE: This output is always active.

Satellite dish

HDMI® (High-Definition Multimedia Interface) is for use with electrical equipment with digital audio and video output. It is designed for best performance with 1080i and 1080p high-definition video signals but will also accept and display VGA, 480i, 480p, 576i, 576p and 720p signals.

PC format signals will also be displayed.

NOTE: Although this television is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly.

LAN port is used to connect the TV to your home network.

A wide variety of external equipment can be connected to the back of the television; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press o to select between TV,

EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC.

When the external input mode is selected while viewing DTV mode, the SCART socket does not output video/ audio signals.

As for SCART output, audio signal may mute or other video signal may output depending on the DTV mode.

English

9

English

CONNECTING YOUR TV

Connecting an HDMI® device

The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device.

This input is designed to accept HDCP (High-Bandwidth Digital Content Protection) programme material in digital form from EIA/CEA-861-D–compliant consumer electronic devices (such as a set-top box or DVD player with HDMI output). For acceptable video signal formats, see page 95.

NOTE: Supported Audio format: Linear PCM, Dolby Digital (AC-3), DTS, sampling rate 32/44.1/48 kHz.

To connect an HDMI device

Connect an HDMI cable (type A connector) to the HDMI terminal.

For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).

If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50 Hz, you will need a Category 2 cable. Conventional HDMI/ DVI cable may not work properly with this model.

HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).

the back and side of your television

HDMI’s ARC (Audio Return Channel)

feature

This feature enables the audio signal of the TV to be sent to the AV amplifier via the HDMI cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier.

the side of your television

HDMI cable

AV amplifier that supports ARC

HDMI device

HDMI cable

To view the HDMI device video, press o to select HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

10

CONNECTING YOUR TV

Connecting an HDMI CEC Control compatible device

You can control the basic functions of connected audio/video devices using the television’s remote control if you connect an HDMI CEC compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 86–87.

the side of your television

AV amplifier

Playback device

Playback device

 

English

For the setup shown above, you will need three HDMI cables.

NOTE:

If several devices are connected, the HDMI CEC Control feature may not operate properly.

For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ).

This function is available when one PC and one AV amplifier are connected separately. However, it may not operate properly if the PC is connected via the AV amplifier.

Before controlling the device(s):

After completing the above connections, set the HDMI CEC Control Setup menu as you desire (see page 86).

The connected devices must also be set. For details, see the operation manual for each device.

The HDMI CEC Control feature uses CEC technology as regulated by the HDMI standard.

This feature is limited to models incorporating Toshiba’s HDMI CEC Control. However, Toshiba is not liable for those operations. Refer to individual instruction manuals for compatibility information.

11

English

CONNECTING YOUR TV

Connecting a computer

With either an HDMI or an RGB/PC connection, you can watch your computer’s display on the television.

To connect a PC to the RGB/PC terminal

When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable.

the back of your television

To connect a PC to the HDMI terminal

When connecting a PC to the HDMI terminal on the television, use an HDMI cable (type A connector).

the side of your television

Computer

HDMI cable

If connecting a PC with DVI terminal, use an HDMI-to-DVI adaptor cable.

the side of your television

Computer

HDMI-to-DVI adaptor cable

For acceptable PC and video signal formats, see page 95.

NOTE:

The edges of the images may be hidden.

If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.

Computer

Mini D-sub

15 pin connector

RGB PC cable (not supplied)

Conversion adaptor if required (not supplied)

To use a PC, set the monitor output resolution on the PC before connecting it to the television. For acceptable PC signal formats, see page 94.

To display the optimum picture, use the PC setting feature (see page 83).

NOTE:

Some PC models cannot be connected to this television.

An adaptor is not needed for computers with a compatible mini D-sub15-pin terminal.

Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction.

When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the AV connection menu.

Some PC models may output unique signals that the television may be unable to detect (see page 94).

If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.

12

CONNECTING YOUR TV

Connecting a home network

The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a media server and play/ display them on your TV.

NOTE:

If you connect to a shared network outside your home, it is advisable to use a router. Always use network media products in private network environments. Connect this TV to the same router as other network media products (server).

If you use a hub or switch to connect the TV to your home network, you may not be able to use the automatic setup and will have to manually set up the network address. See page 51.

If you use a router with built-in DHCP functionality, use the automatic setup. Manual setup may not work.

If you connect the TV and PC directly, use a crossover LAN cable.

Please consult your PC manufacturer about details of PC settings.

Wireless appliances may interfere with Intel® WiDi / wireless display.

To connect the TV to a home network - Wired

 

the back of your television

Modem (if available)

Router with Hub

 

[1]

[2]

 

Server PC

[2][3]

 

Cable or Phone jack

 

 

[2]

To connect the TV to a home network with an internet connection - Wireless

Please refer to “Wireless Setup” section on page 48.

Access point (AP)

Wireless LAN router

Modem

Computer

NOTE:

If this device is going to be operated in the frequency range of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.

If this device is going to be operated for 802.11 b/g/n function in the frequency range of 2.454 GHz to 2.4835 GHz in France, it is restricted to indoor use.

A general authorization is required for using this device outdoors or in public places in Italy.

This device is NOT ALLOWED to be used in the geographical area within a radius of 20 km from the centre of Ny-Alesund in Norway.

Make the wireless LAN appropriate security setting at the time of wireless LAN use to prevent the illegal use, spoofing and interception of communications.

Don’t connect wireless LAN to an outside network directly.

Apply the wireless LAN access point with router function or broadband router. Make the router appropriate security setting to prevent the illegal use.

Refer to the manual of router for a security setting.

English

[1]Coaxial or telephone cable (depending on your modem type)

[2]Standard LAN cable

[3]Do not connect a phone jack directly to the TV’s LAN port.

Warning: This TV complies with the EMC directive only when you use a shielded Cat5 ethernet cable.

13

English

CONNECTING YOUR TV

To connect the TV to the Device with Intel® WiDi / wireless display

Available wireless channel is restricted in the following range in case that you use the Intel® WiDi / wireless display.

2.4 GHz: 1~11 ch

5 GHz: 36~48 ch

PC with Intel® WiDi / wireless display

Intel® WiDi

/ wireless display

14

CONNECTING YOUR TV

Controls and input connections

A wide variety of external equipment can be connected to the input sockets on the side of the television.

While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.

DVB COMMON INTERFACE

The Common Interface is for a Conditional Access Module (CAM). Contact a service provider.

The software updating of CI Plus CAM may be automatically executed. At this time, your Recording/Reminder programming will be cancelled.

USB port

My Contents/USB HDD connection port

Control panel

ILLUSTRATION SHOWS 42L.

Light sensor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote sensor

 

Power LED

 

 

 

On = Green

 

 

 

Standby = Red

English

Switching on

If the RED LED is not lit, check that the mains plug is connected to the power supply and press 1on the remote control; it may take a few moments. The GREEN LED will be lit.

To put the television into Standby, press 1 on the remote control. To view the television, press 1again. The picture may take a few seconds to appear.

For energy saving:

We recommend that you use the television with the factory settings. The factory settings are for energy saving.

Unplugging the mains plug will cut energy use to zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday. Reducing the brightness of the screen will reduce energy use.

Energy efficiency cuts energy consumption and can save money.

NOTE: Putting the television into Standby will reduce energy consumption, but will still draw some power.

Using the TV controls and connections

To turn on or off the TV, press !.

To alter the volume, press + or .

+ and buttons operate as volume up/down as default.

Press p / o repeatedly to switch the function of 2 +/

button as below.

ChannelInputVolume

The My Contents feature provides access to photo, movie and music files stored on a USB storage device that is connected via the USB 1 or USB 2 port or on a network device.

Please always refer to the owner’s manual of the equipment to be connected for full details.

NOTE:

The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment.

Interactive video games that involve shooting a “gun” at an on-screen target may not work with this TV.

15

Toshiba M7463-55, M7453-42, M7453-47, M7463-42, M7453-55 User Manual

English

CONNECTING YOUR TV

Using the menu system

Press on the remote control to display the menu.

The menu appears as a list of eight topics. As each icon is selected by pressing B / b on the remote control, its respective options will appear on the right.

NOTE: The same menu is displayed in DTV (Digital TV) and ATV (Analogue TV) modes; however, where some items are not available in a mode, they will appear greyed out.

Press B / b and OK or c

Picture Mode

Picture Reset

Backlight

Contrast

Brightness

Colour

Tint

Sharpness

Advanced Picture Settings

Expert Picture Settings

Display Settings

Press B / b Press B / b and OK or c

Sound Navi

Sound Mode

Sound

Advanced Sound Settings

Sound Separation Effect

TruVolume

Dynamic Range Control

Balance

Dual

Audio Level Offset

TV Speakers

Headphone Level

Audio Description

Digital Audio Output

Press B / b

Press B / b and OK or c

 

Recording Setup

Options

My Contents Setup

 

MHL Setup

 

HDMI CEC Control Setup

 

Hybrid TV Standard

 

Teletext

 

Panel Lock

 

AV Connection

 

Power Management

 

Blue Screen

 

HDMI Information Display

Press B / b

Press B / b and OK or c

 

Menu Language

Installation

Country

Location

 

 

Channel Tuning

 

DTV Settings

 

Quick Setup

 

Reset TV

Press B / b

Press B / b and OK or c

 

Network Setup

Network

Network Device Setup

Smart Apps Setup

 

Press B / b

Press B / b and OK or c

 

3D Auto Start

3D

2D to 3D Depth

3D PIN

 

 

3D Safety Settings

 

3D Test Pattern

 

3D Important Info

Press B / b

Press B / b and OK or c

 

On Timer

Timers

Sleep Timer

 

Press B / b

Press B / b and OK or c

 

Software Licences

Get Help

Software Upgrade

System Information

 

 

Store Demo

16

SETTING UP YOUR TV

Startup Application

Before switching on the TV make sure that your aerial is connected and any decoder / media recorder, if applicable is connected and in

Standby.

Quick Setup

a Press the 1button, Toshiba logo will appear. After that, The Menu Language screen will appear. This screen will appear the first time that the television is switched on and each time Reset TV is executed.

b Press BbC c to select the menu language and press OK. The Country/Language screen will appear.

Menu Language

Please press [OK] to proceed.

English

Français

Deutsch

Español

Italiano

Português

Nederlands

Svenska

Dansk

Norsk

Suomi

Polski

Türkçe

Magyar

Slovensky

Český

Pусский

Română

Български

Srpski

Ελληνικά

Hrvatski

Укpaϊнcькa

Slovenščina

c Press B / bto highlight Country and press cand B / b to select your country.

The country will be changed, and all existing channels (ATV and DTV) will be cleared even though tuning has not been executed ever.

Quick Setup

Country/Language

1/3

 

Welcome

 

Country

 

 

Thank you for choosing Toshiba TV

 

d Press BbC c to highlight Next and press OK. The Location screen will appear.

Quick Setup

Country

Location

Network

Smart TV

Channel Tuning

Location

1/2

To set up the TV for use within a showroom, please select [Store] from the menu below.

[Home] is recommended for normal use.

*Power requirement for Store mode will be higher due to automatic store demos.

Home

Store

Previous Next

e Press B / b to select Home or Store and press OK. For normal home use, select Home.

f Press BbC c to highlight Next and press OK. The Auto View screen will appear.

Press C / c to select Yes or No and Press OK.

g Press B / b to select Stand or Wall and press

OK.

Press BbC c to highlight Next and press OK. The Network Type screen will appear.

h Press Bto highlight Network Type and then press c and B / b to select Wireless. Press OK.

Quick Setup

Country

Location

Network

Smart TV

Channel Tuning

Network Type

1/5

Network setup allows you to access content on your home network and the Internet. Enjoy online video, music, games, news and more provided by Smart TV portal* and keep your TV up to date with new software.

* Availability is dependant on country selection

Please select from Wired or Wireless

Network Type

 

Wired

Wired

Previous

Next

Skip

Wireless

 

Location

Network

 

 

Smart TV

 

Country

Germany

 

German

 

 

Primary Subtitle Language

German

 

 

 

 

 

 

Greek

 

 

 

Channel Tuning

Secondary Subtitle Language

Turkish

 

 

 

 

 

Greenlandic

 

 

 

Primary Audio Language

German

 

 

 

 

 

 

 

Hungarian

 

 

 

 

 

 

 

 

 

 

 

Secondary Audio Language

English

 

 

 

 

 

 

 

 

 

Icelandic

 

 

 

 

 

 

Previous

Next

 

Irish

 

 

 

 

 

 

 

Italian

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Kurdish

 

 

 

 

 

 

 

 

 

 

 

NOTE:

The following display menus will differ slightly according to the country you selected.

If there is not a country that you want to select in the list, select Others.

i j

When you select Wired (LAN cable connection), skip to step 15.

Press BbC c to highlight Next and press OK. The Wireless Setup screen will appear.

Press B to highlight Wireless Setup and then press c and B / b to select the Wireless Setup type. Press OK.

Quick Setup

Country

Location

Network

Smart TV

Channel Tuning

Wireless Setup

2/5

Please select a wireless network setup option. Assisted Setup is recommended.

Wireless Setup

Easy Setup

 

Easy Setup

 

 

 

Assisted Setup

 

 

 

Manual Setup

 

 

 

 

 

 

Previous

Next

English

17

English

SETTING UP YOUR TV

There are 3 methods for Wireless Setup:

Easy Setup - If the AP supports Wi-Fi Protected Setup, this method can be used. Wi-Fi Protected Setup is an industry standard designed to make connection of wireless LAN equipment and security setup easy. Wi-Fi Protected Setup will automatically configure all wireless settings.

NOTE: WEP or TKIP encryption may not be able to configured by easy setup.

Assisted Setup - follow step 12. Input the Security Key only.

Manual Setup, skip to step 13. Input the all settings.

-AES, AES/TKIP: 8-63 ASCII or 64 Hex characters

-WEP: 5 or 13 ASCII or 10 or 26 Hex characters

There is only one key ID to set for WEP encryption.

Press B / b to highlight Done and press OK.

NOTE:

If Network Name is not displayed, see Manual Setup below to set Network Name before Done is selected.

If BACK is pressed before Done is selected, settings are not saved.

When the message “Wireless configuration is

NOTE: EXIT is available during settings.

complete.” appears on screen, press OK.

k In step 10, when you select Easy Setup;

The screen will skip to step 14.

m In step 10, when you select Manual Setup;

Press BbC c to highlight Next and press OK.

 

The Easy Setup screen will appear.

Press c and B / b to select PBC (Push Button Configuration) or PIN (Personal Identification Number) and press OK.

Press b to highlight Start Scan and press OK.

PBC - Following the on-screen instructions, push the appropriate button on your AP. When a window reporting that the setup is complete appears, press

Press BbC c to highlight Next and press OK. The Manual Setup screen will appear. Press B / b to select Network Name and press OK.

The Software Keyboard window will appear (page 53).

Input the Network Name by using the Software Keyboard. To save your setting, press the GREEN button.

OK.

PIN - When the PIN code window appears, enter the displayed PIN into your AP, and then press OK to continue the PIN Setup. When a message displays to report that the setup is complete, press

OK.

To cancel searching for the AP:

Press BACK while searching for the AP. A message will appear, and then press C / cto select Yes and press OK.

l In step 10, when you select Assisted Setup;

Press BbC c to highlight Next and press OK. The Assisted Setup screen will appear.

Press B / b to select the desired AP and press

OK.

NOTE: Check the MAC address on the label of the AP or in the manual, and select your AP.

Press B / bto select Security Key and press OK. The Software Keyboard window will appear (page 53).

Input the Security Key by using the Software Keyboard. To save your setting, press the GREEN button.

NOTE:

The Security Key must adhere to these conditions:

Press B / b to select Authentication and then press c and B / b to select Open System,

Shared Key, WPA2/WPA-PSK (mixed mode WPA2/WPA) or WPA2-PSK. Press OK.

Press B / bto select Encryption, and then press c and B / b to select None, WEP, AES/TKIP or AES. Press OK.

NOTE:

Certain encryption types are only compatible with specific authentication types.

-When Authentication is Open System, only WEP or None is compatible.

-When Authentication is Shared Key, only WEP or None is compatible.

-When Authentication is WPA2/WPA-PSK (mixed mode WPA2/WPA), only AES/TKIP is compatible.

-When Authentication is WPA2-PSK, only AES is compatible.

When incompatible Authentication/Encryption pairings are detected, a warning message will be displayed, and no connection attempt will be made until the incompatibility is resolved.

There is only one key ID to set for WEP encryption.

Press B / bto select Security Key and press OK. Input the Security Key by using the Software Keyboard (page 53).

18

SETTING UP YOUR TV

To save your setting, press the GREEN button. This item is greyed out when Encryption is None.

When Encryption is WEP, Key ID setting is available. Press B / b to select Key ID and press c and B / b to select 1 (default), 2, 3 or 4.

Press B / b to highlight Done and press OK. When the message “Wireless configuration is complete.” appears on screen, press OK.

NOTE: Settings are not saved if BACK is pressed before Done is selected.

n The Advanced Network Setup screen will appear.

When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (This should usually be set to On.)

When the DHCP function of the router is Off, set Auto Setup to Off, and set the IP Address DNS address(es) manually.

Quick Setup

Advanced Network Setup

3/5

 

 

Country

 

 

 

 

 

Auto Setup

 

On

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Location

 

IP Address

xxx . xxx . xx . x

 

 

 

 

Subnet Mask

xxx . xxx . xx . x

 

 

Network

 

 

 

 

Default Gateway

xxx . xxx . xx . x

 

 

 

 

Auto Setup

 

On

 

 

Smart TV

 

 

 

 

 

Primary DNS Address

xxx . xxx . xx . x

 

 

 

 

 

 

Channel Tuning

 

Secondary DNS Address

xxx . xxx . xx . x

 

 

 

 

Previous

 

Next

 

 

 

 

 

You can view the fixed MAC address for the TV, if one is installed.

Press B / b to highlight Next.

o Press OK, and Network Connection Test will start.

A message will appear to indicate if the connection was successful or if could not be completed.

Network Connection Test

5/5

p Press OK, and Power Management screen will appear. Press B / b to highlight the External Record Control. Press c and B / b to select Off or On and press OK.

q Press B / b to highlight the Companion Device Control. Press c and B / b to select Off or On and highlight Next.

r Press OK. If the Ant/Cable/Satellite screen appears, press B / bto select Antenna, Cable or Satellite, and then press OK to check ().

Antenna

 

Cable

 

Satellite

 

Previous

Next

When you select Antenna or Cable, follow step 19 to 22.

When you select Satellite, skip to step 23.

When you select Antenna (or Cable) and Satellite, the Satellite Settings startup screen will appear automatically after completing the Antenna (or Cable) scan and pressing OK.

s Press BbC c to highlight Next and press OK. The Auto Tuning start up screen will appear with the option to select between DTV and ATV, DTV or ATV if available. Press c and B / b to select the appropriate mode and press OK.

T Press b to highlight Start Scan, and press OK.

The television will start to search for available DTV and/or ATV channels. The progress bar will indicate the scan status.

You must allow the television to complete the search.

Auto Tuning - Antenna

 

 

Progress

Found

DTV Tune

4 %

 

0

ATV Tune

Waiting...

 

0

 

 

Channel: 23

 

 

 

 

 

Network connection was completed successfully.

OK

NOTE: The result of Network Connection Test does not always guarantee the connection.

To cancel the Network Connection Test:

Press EXIT while testing.

When the network can be accessed, Software Upgrade starts automatically. When Software Upgrade is completed, proceed to the next step.

When the search is complete, the television will automatically select channel one.

The Auto Tuning screen will display the total number of services found.

u Press C / c to view the DTV (digital channel) or ATV (analogue channel) lists.

English

19

English

SETTING UP YOUR TV

v Press B / b to move through the list to select a channel, and then press OK to view.

In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning.

REMEMBER: Press TV at any time to select between ATV and DTV modes.

NOTE: The time will be set automatically by transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen.

w Select Next and press OK. The Satellite Settings screen will appear. From this window, you can add the satellites that you wish to tune and configure detailed settings for each one individually.

Select Switch Type and choose the correct switch configuration for your satellite dish from the settings None, ToneBurst, DiSEqC 2way, DiSEqC 4way or Single cable.

Satellite Settings

 

 

 

 

 

 

Switch Type

 

None

 

 

None

 

LNB Power

 

On

 

 

ToneBurst

 

 

No.

Satellite

Dish

LNB

DiSEqC 2way

 

 

 

1

Astra 19.2E

1

1

 

DiSEqC 4way

 

 

 

2

 

 

 

 

Single Cable

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

Done

NOTE:

None is being used when the satellite dish will control only one universal Low Noise Block (LNB) with a single satellite (e.g. Astra 19.2°). As a rule, most households use just one satellite.

ToneBurst controls the ToneBurst switch. It is able to switch two LNBs automatically.

DiSEqC 2way automatically switches between two LNBs, which receive different satellites at the same time (e.g. Astra 19.2° and Hotbird 13°).

DiSEqC 4way automatically switches between up to four LNBs / satellites.

Single cable is selection and control of plural Satellite antennas through the combined single antenna cable.

The setting LNB Power enables you to switch on or off the LNB’s power supply by means of the TV. When your satellite dish consists of only one LNB, LNB Power should generally be activated (On).

When using more than two LNBs, it is recommendable to use external power supply for these.

Satellite Settings

 

 

 

 

 

 

Switch Type

 

None

 

 

 

 

 

LNB Power

 

On

 

 

 

On

 

No.

Satellite

Dish

LNB

 

Off

 

1

Astra 19.2E

1

1

 

 

 

 

 

2

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

4

 

 

 

 

 

 

Done

It is possible to select up to four satellites. Please note that the number of available LNBs and the adjustment of your satellite dish determines the number of satellites found. For example, it is not possible to receive more than one satellite if your dish is directed to a single satellite. For further information on satellite signal technology, please contact your local dealer.

Satellite Settings

 

 

 

 

 

Switch Type

 

None

 

 

 

 

LNB Power

 

On

 

 

 

 

No.

Satellite

Dish

LNB

 

1

Astra 19.2E

1

1

 

 

 

2

 

 

 

 

 

 

3

 

 

 

 

 

 

4

 

 

 

 

 

Transponder : 1/120 (10729) MHz

Dish Type : Fixed

Lower LOF : 9750

Upper LOF : 10600

Done

Once you have selected a satellite, you can change further settings under Dish and LNB. Press OK and C / c to select Dish or LNB and press GREEN button.

Under Dish you choose the dish type that will be used (fixed or moveable dish). The majority of households have a fixed satellite dish.

20

 

SETTING UP YOUR TV

LNB allows you to determine the lower and higher

If you select Single Cable in step 23, the Single

Local Oscillator Frequency (LOF). Usually, the

Cable Settings screen will appear. You can set

factory settings do not need to be changed. You

the appropriate value for each item and highlight

can find the parameters of the lower and higher

Done.

LOF on the specification sheet of your LNB.

 

 

 

Single Cable Settings

 

 

 

 

Satellite Settings

 

 

 

 

 

Switch Type

 

None

 

 

 

 

LNB Power

 

On

 

 

 

 

 

No.

Satellite

Dish

LNB

 

1

Astra 19.2E

1

1

 

 

2

 

 

 

 

 

 

3

 

 

 

 

 

 

4

 

 

 

 

 

Transponder : 1/120 (10729) MHz

Dish Type : Fixed

Lower LOF : 9750

Upper LOF : 10600

Done

Press B / b to highlight Done and press OK.

x If your satellite dish is moveable, the following Positioning screen will appear.

Positioning

 

 

 

 

 

Satellite : ASTRA 23.5°E

 

 

 

 

 

Transponder

1/3(5MHz H(R))

 

Go to 0

 

 

 

 

 

Go to Stored Position

 

 

 

 

 

Step Size

 

1

 

 

 

Positioning

W

E

 

 

 

 

 

 

 

 

Satellite : ASTRA 19.2°E

 

 

 

 

 

Signal Level

 

 

 

0%

 

 

 

 

 

 

 

 

Quality GOOD

Store Position

Press B / b to highlight Positioning, and then press C / c to find the dish position with the strongest signal level.

Press B / bto highlight Store Position and press OK to store the dish position. Repeat steps 23 and 24 for the next satellite as necessary.

Adjust the dish position manually for the maximum Signal Level strength. The signal level strength is displayed from 0 % to 100 %. A high signal level can be achieved by adjusting the satellite dish the best way possible.

User Slot Number

0

User Slot Frequency

1284

Password PIN

None

Verify Slot Frequency

Done

y If the reception testing completes successfully, the Auto Tuning startup screen will display.

Auto Tuning - Satellite

 

Scan Type

Quick Scan

Search Option

Free to Air

Start Scan

 

You can select Search Option from Free to Air or All.

When choosing the search option All, all channels (including encrypted ones) of the satellite will be searched for. If you wish to only search for unencrypted (free) channels, please select Free to Air. In this case, the channel scan will be completed faster.

z Press b to highlight Start Scan, and press OK.

The television will start to search for available DVB-S channels. The progress bar will indicate the scan status.

When the search is complete, the Auto Tuning results screen will display the total number of services found.

Use B / b to move through the list to select a channel, and then press OK to view.

PLEASE NOTE

The Quick Setup menu can also be accessed at any time from the Installation menu.

Signal Level

 

 

30%

 

 

 

 

Press B / b to highlight Done and press OK.

If your satellite dish is not movable, please adjust the dish manually and press Done.

English

21

English

SETTING UP YOUR TV

Ant/Cable/Satellite (if available)

From this menu, you can set the RF input configuration.

a Press

and B / b to highlight Installation

icon.

 

b Press cand B / bto select Channel Tuning and press OK.

c Press B / b to select Ant/Cable/Satellite and press OK.

d Press B / b to select Antenna, Cable or

Satellite.

e Press B / b to highlight Next and press OK.

NOTE: When you attempt to change the Ant/ Cable/Satellite setting, a warning message will appear followed by PIN entry (if PIN has been set) and a prompt for Auto Tuning.

f When Ant/Cable/Satellite is set to Cable, the following setting options will be provided in the

Auto Tuning screen.

Press B / bto select an item and press c and B / b to select your desired option.

Auto Tuning - Cable

 

 

 

Tuning Mode

DTV and ATV

 

 

Start Scan

 

DTV

 

 

 

Operator Selection

Others

 

 

Scan Type

Quick Scan

 

 

Start Frequency

Auto

 

 

End Frequency

Auto

 

 

Modulation

Auto

 

 

Symbol Rate

Auto

 

 

Network ID

Auto

 

With the exception of DTV Scan Type and DTV Modulation items, all of the following items will have 2 operating modes. The first is Auto where the values for each item are preset by the system. The second is an Input mode where you will be able to enter a single value in place of the pre-set value. If no channel is currently tuned and the Input state is chosen, a system default value will be shown. However, if a channel is currently tuned when the item is accessed, the value of the current channel will be displayed.

Operator Selection:

You can choose the Cable operator depending on the

Country you set.

DTV Scan Type:

This item determines whether a Quick Scan or a Full Scan will be executed.

The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time.

DTV Start Frequency:

This sets the frequency from which the scan will begin.

DTV End Frequency:

This sets the frequency at which the scan will end.

DTV Modulation:

You can choose from six QAM modulation settings.

DTV Symbol Rate:

This is the baud rate (KS/s) of the scan.

DTV Network ID:

This is the Network ID to be utilized for the scan. This item is greyed out when DTV Scan Type is set to “Full Scan”.

22

SETTING UP YOUR TV

Satellite Settings

From the System Setup menu, you can add the satellites that you wish to tune and configure detailed settings for each one individually.

To add a satellite:

a Press

and B / b to highlight Installation

icon.

 

b Press cand B / bto select Channel Tuning and press OK.

c Press b to select Satellite Settings and press

OK.

Satellite Settings

 

 

 

 

Switch Type

 

None

 

 

 

LNB Power

 

On

 

 

 

No.

Satellite

Dish

LNB

 

1

Astra 19.2E

1

1

 

2

 

 

 

 

3

4

Transponder : 1/120 (10729) MHz

Dish Type : Fixed

Lower LOF : 9750

Upper LOF : 10600

Done

d Press b to highlight a new line to add an another satellite and press OK.

e Press B / buntil the required satellite is displayed and press OK.

To delete a satellite:

a In the Satellite Settings menu, press B / b to select the satellite you want to delete.

b Press the RED button. A confirmation window will appear.

c Press C / c to select Yes and press OK.

To edit the satellite settings:

a In the Satellite Settings menu, press c to edit

Switch Type.

b Press B / bto select None, ToneBurst, DiSEqC 2way, DiSEqC 4way or Single Cable as your satellite switch type.

c Press b to highlight LNB Power, press c to edit LNB Power and press B / b to select On or Off.

To add a transponder:

a In the Satellite Settings menu, press B / b to highlight the line you want to edit and press OK.

1

Astra 19.2E

1

1

b Press the GREEN button. The Transponder Settings screen will appear.

Transponder Settings

 

Frequency

Polarisation

Symbol Rate

S/S2

1

10743

H

22000

S

2

10773

H

22000

S

3

10788

V

22000

S

4

10817

V

22000

S

5

10832

H

22000

S

6

10847

V

22000

S

7

10861

H

22000

S

8

10876

V

22000

S

c Press B to highlight a new line.

Transponder Settings

 

Frequency

Polarisation

Symbol Rate

S/S2

76

12640

H

22000

S

77

12662

H

22000

S

78

12669

V

22000

S

79

12692

H

22000

S

80

12699

V

22000

S

81

12721

H

22000

S

82

12728

V

22000

S

83

 

 

 

 

d Press OK.

83

0

H

0

S

NOTE: It is not possible to delete position No.1.

e Edit each parameter as required and press OK.

83

1231

H

0

S2

English

23

English

SETTING UP YOUR TV

To delete a transponder:

a In the Transponder Settings menu, press B / b to highlight the line you want to delete.

b Press the RED button.

To edit the Transponder Settings:

a In the Transponder Settings menu, press B / b to highlight the line you want to edit and press OK.

b Press C / c to select Frequency, Polarisation,

Symbol Rate or S/S2, and set the item using the number buttons and B / b if necessary.

c Press OK to save your settings.

d Repeat steps 1 through 3 for other lines.

e Press the BLUE button to finish editing and return to Satellite Settings.

c Press B / b to select Lower LOF or Upper LOF and use the number buttons (0-9) to input the appropriate frequencies.

Auto Tuning

NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them.

Auto Tuning will completely re-tune the television and can be used to update the channel list. It is recommended that Auto Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost.

a Press

and B / b to highlight Installation

icon.

 

b Press cand B / bto select Channel Tuning and press OK.

c Press B / bto select Auto Tuning and press OK.

< Channel Tuning

Press the GREEN button to cancel any edits that were made.

Press the YELLOW button to reset all transponder settings to their initial default settings.

To select the Dish Type:

a In the Satellite Settings menu, press B / b to select the required satellite line and press OK.

b Press C / c to highlight Dish and press the GREEN button.

Dish Settings

 

Dish : 1

 

Dish Type

Fixed

c Press c and B / b to select Dish Type. You can select Movable or Fixed as the Dish Type.

To select the LNB Settings:

a In the Satellite Settings menu, press B / b to select the required satellite line and press OK.

b Press C / c to highlight LNB and press the GREEN button.

LNB Settings

 

LNB : 1

 

Lower LOF

9750

Upper LOF

10600

Ant/Cable/Satellite

Satellite Settings

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

Antenna Amplifier

A message will appear, and then press C / c to select Yes and press OK.

d Press c and B / b to select DTV, ATV or DTV and ATV, if available, then highlight Start Scan and press OK to continue with the Auto Tuning.

Auto Tuning - Antenna

 

 

 

 

 

Tuning Mode

DTV

 

DTV

 

 

 

ATV

 

 

 

DTV and ATV

 

 

Start Scan

NOTE: If you have selected Others for the

Country field in the Installation menu, and selected a tuning mode other than DTV, choose the optimum ATV broadcasting system (B/G, I, D/ K or L).

The television will start to search for all available DTV and/or ATV services.

You must allow the television to complete the search.

When the search is complete, the Auto Tuning screen will display the services found.

e Press B / b to move through the list to select a channel and press OK to view.

24

 

SETTING UP YOUR TV

ATV Manual Tuning

a In the Channel Tuning menu, press b to select

 

ATV Manual Tuning and press OK.

Tuning

The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/ decoder with a SCART lead or when you want to tune-in a station on another System.

Use C / cto move across the screen and select any of the ATV Manual Tuning options. Then use B / bto adjust the settings.

ATV Manual Tuning

System

 

1

 

I

A

 

 

 

 

C

 

2

 

 

 

 

0

 

V

 

C

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 2 3 4 5 6 7 8 9

1Position

The number to be pressed on the remote control to tune the channel.

2System

Specific to certain areas.

3Colour System

Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.

4Skip

Set Skip to On (8) or Off (() for the selected channel. See page 26.

5Signal Class

The channel classification.

6Channel

The channel number on which a station is being broadcast.

7Search

Search up and down for a signal.

8Manual Fine Tuning

Only used if interference/weak signal is experienced. See page 91.

9Station

Station identification. Use the Bb and C cbuttons to enter up to seven characters.

To allocate a position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film in the media recorder, press PLAY and manually tune.

< Channel Tuning

Ant/Cable/Satellite

Satellite Settings

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

Antenna Amplifier

b Press B / b to select the desired position. We suggest Pos. 0 for a media recorder.

ATV Manual Tuning

Pos.

Channel

Station

0 C2

1S10

2C7

3S40

4C22

5C25

6C28

7C30

Different Channel numbers may be displayed.

c Press OK to select. If the channel chosen for the media recorder is set to skip, Skip should be removed before storing.

d Press c to select System and press B / b to change if required.

ATV Manual Tuning

 

 

System

 

 

1 I A

C 2

0

e Then press c to select Search.

f Press B / b to begin the search. The search symbol will flash.

ATV Manual Tuning

 

 

Search

 

 

1 I A

C 2

0

English

25

English

SETTING UP YOUR TV

g Each signal will show on the television. If it is not your media recorder, press B / b again to restart the search.

h When your media recorder signal is found, press c to move along to Station. Use BbC c to put in the required characters, e.g. VCR.

ATV Manual Tuning

Station

1

 

I

 

A

 

 

 

C

 

2

 

 

 

0

 

V

 

C

 

R

 

 

 

 

 

 

 

i Press OK to save.

j Repeat for each position you want to tune. k Press EXIT when you have finished.

PLEASE NOTE

This television has direct channel entry if the channel numbers are known.

Select the ATV Manual Tuning screen in Step 3. Enter the Position number, the System, then

C for standard (terrestrial) channels or S for cable channels and the Channel number. Press OK to save.

Skip

To prevent certain channels from being viewed, positions can be skipped.

a Select ATV Manual Tuning from the Channel Tuning menu.

b Press B / bto highlight the position to be skipped and press OK.

ATV Manual Tuning

Pos.

Channel

Station

0 C2

1S10

2C7

3S40

4C22

5C25

6C28

7C30

c Press c to select Skip.

d Press B / b to turn Skip on and press OK.

8 on the screen indicates a skipped position.

ATV Manual Tuning

Skip: On

1

 

I

 

A

 

 

C

 

2

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

e Press BACK and repeat from Step 2 or press

EXIT.

Each position has to be individually selected. To turn Skip off, repeat the procedure for each position.

Skipped positions cannot be selected by PU and Puor by the controls on the television but can still be accessed by the number buttons on the remote control.

26

SETTING UP YOUR TV

 

DTV Manual Tuning

Sorting positions

Channels may be moved and saved to the position of your choice.

a Select ATV Manual Tuning from the Channel Tuning menu.

b With the list of channels showing, press B / b to highlight the position to be moved and press c.

ATV Manual Tuning

 

 

Pos.

Channel

Station

0

C - 69

 

 

 

 

1

C - 31

BBC1

 

2

C - 43

BBC1

3C - 7

4C - 9

5C - 12

6C - 23

7C - 2

c Press B / b to move through the list to your preferred position. As you do so, the other channels will move to make room.

d Press C to save your move.

Repeat as necessary and press EXIT.

NOTE: This feature varies depending on the Ant/Cable/ Satellite setting.

Manual Tuning

This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.

a Select DTV Manual Tuning from the Channel Tuning menu and press OK.

DTV Manual Tuning - Antenna

WEAK AVERAGE STRONG

Signal Strength

 

 

Quality

 

GOOD

 

Channel

67

Frequency

842.00 MHz

Bandwidth

8 MHz

Start Scan

 

 

b Press B / b to select Channel and press c to display the Channel Number list. Use the number buttons to enter the number.

c Press B / b to select Frequency and press C / c to adjust the value. When there is no Channel corresponding to the Frequency, “--” is displayed to the Channel.

d Highlight Start Scan and press OK. The television will automatically search for that multiplex.

DTV Manual Tuning - Antenna

0 New Channels - Total 6

New

Pos.

Name

Type

 

1

ABC ONE

 

 

 

 

 

 

 

 

2

ABC TWO

 

 

 

 

 

 

 

 

7

ABC THREE

 

 

 

 

 

 

 

 

40

ABC NEWS 24

 

 

 

 

 

 

 

 

51

ABCi

 

 

 

 

 

 

 

When the multiplex is found, any channels that are not currently in the channel list will be added and the channel information at the top of the screen will be updated.

e Repeat as necessary. Press EXIT to finish.

English

27

English

SETTING UP YOUR TV

Manual Tuning for DVB-C

When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows:

Frequency: Input a specific frequency to be scanned

Modulation: Choose from one of five QAM modulation options

Symbol Rate: Input a specific baud rate (KS/s) to be used for the manual scan

Highlight Start Scan and press OK.

Manual Tuning for DVB-S

When Ant/Cable/Satellite is set to Satellite, DTV Manual Tuning items are as follows:

DTV Manual Tuning - Satellite

WEAK AVERAGE STRONG

Signal Strength

 

 

 

Quality

 

 

POOR

 

Satellite

ASTRA 28.2°E

Transponder

1/83

Frequency

10714 MHz

Symbol Rate

22000 KS/s

Polarisation

 

H

Search Option

Free to Air

Start Scan

Press B / bto highlight an item (Satellite, Transponder,

Frequency, Symbol Rate, Polarisation or Search Option) and press C / c to select the required option.

Highlight Start Scan and press OK.

Antenna Amplifier

a Select Antenna Amplifier from the Channel Tuning menu and press OK.

b Press B / b to select DTV and press OK. Press B / b to select On or Off.

c Press B / b to select ATV and press OK. Press B / b to select On or Off.

DTV Settings

Channels (Antenna/Cable)

The channel order may be changed to suit your personal preference.

a Select DTV Settings from the Installation menu and press OK.

b Press B / b to select Channels and press OK.

< DTV Settings

Channels

Subtitle and Audio

Parental PIN Setup

Parental Control

Local Time Setting

DVB Character Set

Standby Channel Update

Dynamic Scan

Data Transfer

Common Interface

Stored CICAM PIN

c For your convenience, you can jump to specific places in the list by one of two methods.

Channels

Antenna TV

 

 

Line No.

1/10

 

 

Pos. Name

1ABC ONE

2ABC TWO

7

ABC THREE

30

CABC Channel

40

ABC NEWS 24

51

ABCi

822AA

823AC

Line Number Jump — Use the number buttons (0-9) to input the line number you want to select and press OK.

It is also possible to change the Position number of a particular channel.

Renumber — Press the RED button to renumber the highlighted channel. Edit the channel number using the number buttons and press OK. If the position number you input already exists, a confirmation window will appear.

Pos. Name

ABC ONE

28

SETTING UP YOUR TV

Move — Press the GREEN button to activate the Move feature. Press B / b to select the channel you wish to move and press OK to check.

If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary.

Once all desired channels have been checked, press B / b to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.

Channels

Antenna TV

 

 

 

 

 

Line No.

1/10

 

 

 

 

 

 

 

 

Pos.

Name

 

 

 

1

ABC ONE

 

 

 

 

 

2

ABC TWO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

ABC THREE

 

 

 

 

 

 

 

 

 

 

 

 

 

30

CABC Channel

 

 

 

 

 

 

 

 

 

 

 

 

 

40

ABC NEWS 24

 

 

 

 

 

 

 

 

 

 

 

 

 

51

ABCi

 

 

 

 

 

 

 

 

 

 

 

 

 

822

AA

 

 

 

 

 

 

 

 

 

 

 

 

823

AC

 

 

 

 

 

 

 

 

 

 

Delete — Press the BLUE button to activate the Delete feature. Press B / b to select the channel you wish to delete and press OK. Press the BLUE button and select "Yes" on Confirmation Message to execute the Delete.

Sort — Press the YELLOW button.

A confirmation window message will appear. In the window, if you select Yes, it will transit to “Sort Type Selection” window.

In the “Sort Type Selection” window, there are 3 kinds of sort type.

-Number (default)

-A - Z Sort

-Z - A Sort

Your existing channel order will be lost. Do you wish to continue?

Yes

Renumber, Move, Sort and Delete functions are not available for Antenna channels. Renumber, Move, Sort and Delete functions are available only for the DVB-C in Germany.

Channels (Satellite)

a Select DTV Settings from the Installation menu and press OK.

b Select Channels and press OK.

The satellite channel list will appear.

Channels

 

Satellite TV

 

 

 

 

 

 

 

 

 

Line No.

1/10

 

 

 

 

 

Pos.

Name

Satellite

1

DDD

19.2°E

 

2

AB

19.2°E

 

3

E

19.2°E

801

BBC

22.5°E

 

802

BB

22.5°E

 

 

803

BA

22.5°E

 

 

822

AA

25.6°E

 

 

823

AC

25.6°E

 

 

 

 

 

 

 

 

c For your convenience, you can edit and sort your channel list.

Line Number Jump — Press the number buttons (0-9) to input the line number you want to select and press OK.

Satellite Jump — Press Z / z to jump to the next channel on a different Satellite.

Renumber — Same as Antenna/Cable channels. See page 28.

Move — Same as Antenna/Cable channels. See page 29.

Sort — Press the YELLOW button.

A confirmation window message will appear. In the window, if you select Yes, it will transit to “Sort Type Selection” window.

In the “Sort Type Selection” window, there are 3 kinds of sort type.

-Number (default)

-A - Z Sort

-Z - A Sort

Delete — Press the BLUE button to activate the Delete feature. Press B / b to select the channel you wish to delete and press OK. Press the BLUE button and select "Yes" on Confirmation Message to execute the Delete.

English

29

English

SETTING UP YOUR TV

Standby Channel Update

If the Standby Channel Update is set to On, when the TV is in Standby, Digital Tuning is automatically executed.

a Select DTV Settings from the Installation menu and press OK.

b Press b to select Standby Channel Update and press c and B / b to select On or Off.

Location setting

You can select either Home or Store mode. Home is recommended for normal home use. Select Store when using the television for displaying in a shop, etc.

a Select Location from the Installation menu.

b Press c or OK to edit Location and press B / b to select Home or Store.

Analogue switch-off

Data Transfer

You can copy channel information from TV to USB memory and edit the channel information by using your PC and updates channel information to your TV.

a Select DTV Settings from the Installation menu and press OK.

b Press B / b to select Data Transfer and press c and B / b to select Channel List, Transponder Table (if available) or Preset Order.

c In case of Channel List and Transponder Table, press cto select USB to TV or TV to USB. In case of Preset Order, select USB to TV.

This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.

This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is retuned to ensure that existing and new digital services can be viewed without disruption.

30

Loading...
+ 74 hidden pages