Toshiba GD-1150, GD-1201, GD-1151, GD-1260, GD-1160 User Manual

0 (0)

SERVICE MANUAL

FACSIMILE

GD-1150/1151/1200/1201/1160/1260

Model: GD-1150/1151/1200/1201/1160/1260

Publish Date: Novemver 2003

File No. SME030007F0

R03102142202-TTEC

Ver06_2008-12

Trademarks

The official name of Windows 95 is Microsoft Windows 95 Operating System.

The official name of Windows 98 is Microsoft Windows 98 Operating System.

The official name of Windows Me is Microsoft Windows Millennium Edition Operating System.

The official name of Windows 2000 is Microsoft Windows 2000 Operating System.

The official name of Windows XP is Microsoft Windows XP Operating System.

Microsoft, Windows, Windows NT, Windows Vista and the brand names and product names of other Microsoft products are trademarks or registered trademarks of Microsoft Corporation in the U.S. and/or other countries.

Apple, AppleTalk, Macintosh, and Mac are trademarks of Apple Computer, Inc. in the U.S. and other countries.

PostScript is a trademark of Adobe Systems Incorporated.

NOVELL, NetWare, and NDS are trademarks or registered trademarks of Novell, Inc.

Molykote is a registered trademark of Dow Corning Corporation.

Other company names and product names in this manual are the trademarks of their respective companies.

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TOSHIBA TEC CORPORATION. No patent liability is assumed, however, with respect to the use of the information contained herein.

GENERAL PRECAUTIONS REGARDING THE INSTALLATION AND SERVICE FOR e-STUDIO3511/4511, e-STUDIO281c/351c/451c, e-STUDIO350/352/450/452, e-STUDIO200L/202L/230/230L/232/280/280S/282/282S AND GD-1150/1151/1200/1201/1160/1260

The installation and service should be done by a qualified service technician.

1)Transportation/Installation

-Be sure to transport the equipment with the number of people given in the following table holding the positions as indicated below. Pay full attention when handling it because it is quite heavy.

Model

Weight

Number of people

e-STUDIO3511/4511

Approx. 112 kg (246 lb.)

4

e-STUDIO281c/351c/451c

Approx. 113 kg (249 lb.)

4

e-STUDIO350/352/450/452

Approx. 83 kg (182.98 lb.)

2

e-STUDIO200L/202L/230/

Approx. 75 kg (165.34 lb.)

2

230L/232/280/280S/282/282S

 

 

e-STUDIO3511/4511/281c/351c/451c

e-STUDIO350/352/450/452/

200L/202L/230/230L/232/280/280S/282/282S

-Be sure not to hold the movable parts or units (e.g. the control panel, ADU or RADF) when transporting the equipment.

-Be sure to use a dedicated outlet with AC 110/13.2A, 115V or 127V/12A, 220V-240V or 240V/8A for its power source.

-The equipment must be grounded for safety. Never ground it to a gas pipe or a water pipe.

-Select a suitable place for installation.

Avoid excessive heat, high humidity, dust, vibration and direct sunlight.

-Also provide proper ventilation as the equipment emits a slight amount of ozone.

-To insure adequate working space for the copying operation, keep a minimum clearance of 80 cm (32”) on the left, 80 cm (32”) on the right and 10 cm (4”) in the rear.

-The socket-outlet shall be installed near the equipment and shall be easily accessible.

08/03

2)Service of Machines

-Basically, be sure to turn the main switch OFF and unplug the power cord during service.

-Be sure not to touch high-temperature sections such as the exposure lamp, the fuser unit, the damp heater and their periphery.

-Be sure not to touch high-voltage sections such as the chargers, transfer belt, 2nd transfer roller, developer, IH control circuit, high-voltage transformer, exposure lamp control inverter, inverter for the LCD backlight and power supply unit. Especially, the board of these components should not be touched since the electric charge may remain in the capacitors, etc. on them even after the power is turned OFF.

-Be sure not to touch rotating/operating sections such as gears, belts, pulleys, fan, etc.

-Be careful when removing the covers since there might be the parts with very sharp edges underneath.

-When servicing the machines with the main switch turned ON, be sure not to touch live sections and rotating/operating sections. Avoid exposure to laser radiation.

-Use suitable measuring instruments and tools.

-Avoid exposure to laser radiation during servicing.

Avoid direct exposure to the beam.

Do not insert tools, parts, etc. that are reflective into the path of the laser beam. Remove all watches, rings, bracelets, etc. that are reflective.

-Unplug the power cable and clean the area around the prongs of the plug once a year or more. A fire may occur when dust lies on this area.

3)Main Service Parts for Safety

-The breaker, door switch, fuse, thermostat, thermofuse, thermistor, etc. are particularly important for safety. Be sure to handle/install them properly. If these parts are shorted circuit and/or made their functions out, they may burn down, for instance, and may result in fatal accidents. Do not allow a short circuit to occur. Do not use the parts not recommended by Toshiba TEC Corporation.

4)Cautionary Labels

-During servicing, be sure to check the rating plate and the cautionary labels such as “Unplug the power cord during service”, “Hot area”, “Laser warning label” etc. to see if there is any dirt on their surface and whether they are properly stuck to the equipment.

5)Disposition of Consumable Parts, Packing Materials, Used Batteries and RAM-ICs

-Regarding the recovery and disposal of the equipment, supplies, consumable parts, packing materials, used batteries and RAM-ICs including lithium batteries, follow the relevant local regulations or rules.

6)When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise noted in this manual or other related documents. Be careful not to reassemble small parts such as screws, washers, pins, E-rings, star washers in the wrong places.

7)Basically, the machine should not be operated with any parts removed or disassembled.

8)Precautions against Static Electricity

-The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband, because the ICs on it may become damaged due to static electricity.

Caution:

Before using the wristband, pull out the power cord plug of the equipment and make sure that there are no uninsulated charged objects in the vicinity.

Caution: Dispose of used batteries and RAM-ICs including lithium batteries according to this manual.

Attention: Se débarrasser de batteries et RAM-ICs usés y compris les batteries en lithium selon ce manuel.

Vorsicht: Entsorgung des gebrauchten Batterien und RAM-ICs (inklusive der Lithium-Batterie) nach diessem Handbuch.

CONTENTS

1. SPECIFICATIONS AND OUTLINE OF SYSTEM

......................................................... 1-1

1.1

FAX Options ........................................................................................................................

1-1

1.2

Specifications.......................................................................................................................

1-2

1.3

Features ..............................................................................................................................

1-5

1.4

Accessories and Parts .........................................................................................................

1-7

1.5

Options ................................................................................................................................

1-8

1.6

System List ........................................................................................................................

1-10

1.7

Units and Components ......................................................................................................

1-15

1.8

Layout of PC Boards..........................................................................................................

1-16

2. LSU-RELATED FUNCTIONS .......................................................................................

2-1

2.1

Recording Mode ..................................................................................................................

2-1

2.2

Recording Paper Selection Algorithm and Printing Algorithm .............................................

2-2

 

2.2.1 Recording paper selection algorithm........................................................................

2-2

 

2.2.2 Printing algorithm .....................................................................................................

2-2

 

2.2.3 Setting for the split recording....................................................................................

2-6

2.3

Recording Paper and Function ............................................................................................

2-7

 

2.3.1 Table of the recording paper selection modes .........................................................

2-8

 

2.3.2 Others.......................................................................................................................

2-8

2.4

Energy Saver Mode.............................................................................................................

2-9

2.5

Memory Reception.............................................................................................................

2-10

3. DIALING/COMMUNICATION CONTROL.....................................................................

3-1

3.1

Circuit Connection and Procedure to Change Mode ...........................................................

3-1

 

3.1.1 Dial call-up transmission to a telephone circuit ........................................................

3-1

 

3.1.2 Selection of the communication mode .....................................................................

3-2

 

3.1.3 Procedure to select the transmission mode .............................................................

3-2

3.2

Signaling System Diagram and Signal Forms .....................................................................

3-3

 

3.2.1

Circuit control signals ...............................................................................................

3-3

 

3.2.2 Communication with the binary signals ....................................................................

3-4

 

3.2.3

V.8/V.34 communication sequence........................................................................

3-13

3.3

FAX Automatic Switching ..................................................................................................

3-26

 

3.3.1

General functions ...................................................................................................

3-26

 

3.3.2

TEL mode...............................................................................................................

3-26

 

3.3.3

FAX mode ..............................................................................................................

3-26

4. ELECTRICAL CIRCUITS ..............................................................................................

4-1

4.1

Configuration .......................................................................................................................

4-1

4.2

Description of Circuits..........................................................................................................

4-5

 

4.2.1

Configuration ............................................................................................................

4-5

 

4.2.2 Line path switching control circuit.............................................................................

4-7

 

4.2.3 Dial pulse generation circuit .....................................................................................

4-9

 

4.2.4 Line current detection circuit ..................................................................................

4-11

 

4.2.5

CI detection circuit..................................................................................................

4-13

 

4.2.6

Line monitor circuit .................................................................................................

4-15

4.3

PC Boards .........................................................................................................................

4-18

5. INSTALLATION ............................................................................................................

5-1

5.1 Explanation to the Users......................................................................................................

5-1

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

CONTENTS

1

05/06

GD-1150/1151/1200/1201/1160/1260

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

CONTENTS

 

2

1. SPECIFICATIONS AND OUTLINE OF SYSTEM

 

1.1

FAX Options

1

 

e-STUDIO3511/4511/350/450/200L/202L/203L/230/232/233/280/282/283 can be used as a FAX by

installing the FAX unit (GD-1150/1151).

 

e-STUDIO281c/351c/451c/352/353/452/453 can be used as a FAX by installing the FAX unit (GD-

1200/1201).

 

Some options can be added when the FAX unit is installed or to extend the FAX functions (

P. 1-8

"1.5 Options").

 

Be sure to use the FAX unit and the 2nd line for the FAX board only in the following combinations.

FAX unit

2nd line for FAX board

 

 

GD-1150

GD-1160

 

 

GD-1151

GD-1260

 

 

GD-1200

GD-1160

 

 

GD-1201

GD-1260

 

 

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 1

08/03

1.2Specifications

1)Main system

-Type

Desktop type transceiver

-Operation

Transmission Manual/Automatic

Reception Manual/Automatic

2) Scanner

<Scanning density> [ ]: at rotation transmission

-Horizontal direction

16 lines/mm, 8 lines/mm

[15.4 lines/mm, 7.7 lines/mm, 3.85 lines/mm]

-Vertical direction

15.4 lines/mm, 7.7 lines/mm, 3.85 lines/mm [16 lines/mm, 8 lines/mm]

-Combination

U-Fine: 16 x 15.4 lines/mm [15.4 x 16 lines/mm] Semi-U-Fine:8 x 15.4 lines/mm [15.4 x 8 lines/mm]

Note:

Operation from the panel is automatically converted at the receiving capability of “U-Fine” combination.

Fine:

8 x 7.7 lines/mm [7.7 x 8 lines/mm]

Normal:

8 x 3.85 lines/mm [3.85 x 8 lines/mm]

-Effective scanning area

A

2

Scanning

direction

3

B

 

 

3

2.5

 

 

 

(Mechanical system error ±2 mm included)

 

 

 

(mm)

Original size

 

A

B

 

A4

 

210

204.5

 

B4

 

364

358.5

 

A3

 

420

414.5

 

FOLIO

 

330

324.5

 

LT

 

216

210.5

 

LG

 

355.6

350.1

 

LD

 

431.8

426.3

 

GD-1150/1151/1200/1201/1160/1260

 

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 2

3) Transmission system

 

Circuits to be used: Subscriber line/FAX communication network (G3)

 

-

Calling automatic transmission (including the sequential multi-address transmission)

1

- Calling automatic reception (polling reception)

 

- Called automatic transmission (polling transmission)

 

-

Called automatic reception

 

-

Calling manual transmission

 

-

Calling manual reception

 

-

Called manual transmission

 

-

Called manual reception

 

Communication mode

High-speed mode (Toshiba original procedure mode)

G3 mode

ECM (Error Correction Mode)

Circuit carrier link equalization function

Embedded

Output level

–16 dBm to –8 dBm (The setting can be changed by “1 dB”.)

Input level

–43 dBm to 0 dBm

(Level –55 dBm or lower cannot be detected)

Specifications of the communication mode

 

High-speed mode

G3 mode

ECM

 

(Toshiba original procedure mode)

 

 

 

 

 

 

 

Horizontal scanning den-

8 dots/mm

Same as on the left

Same as on the left

sity

300 dpi (Reception only)

 

 

 

16 dots/mm

 

 

 

 

 

 

Vertical scanning density

3.85 lines/mm

Same as on the left

Same as on the left

 

7.7 lines/mm

 

 

 

300 dpi (Reception only)

 

 

 

15.4 lines/mm

 

 

 

 

 

 

Encoding system

MH/MR/MMR/JBIG

MH/MR

MH/MR/MMR/JBIG

 

 

 

 

Minimum transmission

2.5 ms

Same as on the left

Same as on the left

time for 1 line

 

 

 

 

 

 

 

Transmission speed

14.4 k/12 k/9600

Same as on the left

33.6 k/31.2 k/28.8 k/

(image signal) and modu-

7200/4800/2400 bps

 

26.4 k/24 k/21.6 k/

lation method

Conformance to V.17/V.29/V.27 ter

 

19.2 k/16.8 k/14.4 k/

 

 

 

12 k/9600/7200/

 

 

 

4800/2400 bps

 

 

 

 

Control signal

300 bps

Same as on the left

2400/1200/600/

 

V.21

 

300 bps

 

 

 

V.34/V.8/V.21

 

 

 

 

Procedure to control the

Toshiba original procedure

T.30 conformance

Same as on the left

transmission

 

 

 

 

 

 

 

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 3

4)Recording paper

-Recording method

Electrophotographic recording method by LSU (Laser Scanning Unit)

-Horizontal printing density

24 lines/mm (96 lines/mm with the smoothing processing) [23.1 lines/mm (92.4 lines/mm with the smoothing processing)]

-Vertical printing density

23.1 lines/mm (24 lines/mm with the smoothing processing)

-Recording paper size and the effective printing area

 

 

Unit: mm (inch)

Paper size

Dimension (width x length)

Printing area

 

 

 

A5-R

148 x 210

143 x 204.5

 

 

 

B5-R

182 x 257

177 x 251.5

 

 

 

B5

257 x 182

252 x 176.5

 

 

 

A4-R

210 x 297

205 x 291.5

 

 

 

A4

297 x 210

292 x 204.5

 

 

 

B4

257 x 364

252 x 358.5

 

 

 

A3

297 x 420

292 x 414.5

 

 

 

FOLIO

210 x 330

205 x 324.5

 

 

 

ST-R

139.7 x 216 (5.5 x 8.5)

134.7 x 210.5

 

 

 

LT-R

216 x 279.4 (8.5 x 11)

211 x 273.9

 

 

 

LT

279.4 x 216 (11 x 8.5)

274.4 x 210.5

 

 

 

LG

216 x 355.6 (8.5 x 14)

211 x 350.1

 

 

 

LD

279.4 x 431.8 (11 x 17)

274.4 x 426.3

 

 

 

COMP

257 x 356 (10.125 x 14)

252 x 350.5

 

 

 

GD-1150/1151/1200/1201/1160/1260

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

SPECIFICATIONS AND OUTLINE OF SYSTEM

 

1 - 4

1.3

Features

 

 

• A3/LD scanning

1

Scans data across A3/LD width and transmits in A3/LD actual size.

• High-speed scanning

 

Inputs an A4/LT-size transmitted document in about 0.7 seconds (A4/LT document transmitted

 

widthwise).

 

• High-speed transmission

 

33.6 Kbps high speed modem

 

Toshiba original high-speed communication modes EX and HS

 

JBIG encoding system

 

Dual Access

-FAX transmission

There are two types of FAX transmission: Page-by-page direct transmission and memory transmission that all pages are stored in the memory before being transmitted.

-FAX reception

Basically, all pages are input in the memory before being output. This reduces the time that the FAX communication occupies the machine, making Dual Access between the copying/faxing and printing operation possible.

Namely, the followings are possible:

-Memory input during the memory transmission

-Memory input during the memory reception

-Copying during the memory transmission

-Reception during the copying

-Reception during the memory output

-Reception during the list output

Laser printing on plain paper

Printing is made on the standard size paper (A3/LD, B4/COMP, A4/LT/LG, A4-R/LT-R, B5, B5-R, FOLIO, and A5-R/ST-R) with the laser system.

Gradation

256 tones, error diffusion method

Memory communication function

Image data can be stored in the HDD. In the delayed transmission, image data read from an original are stored in the memory, then sent when the specified time comes.

Other memory functions: multi transmission, memory reception, ECM communication, etc.

Smoothing

The smoothing process is applied to the received images so that they are changed from 8 × 3.85, 8 × 7.7, 8 × 15.4 or 16 × 15.4 to 24 × 92.4 (equivalent to 600 × 2400dpi), then printed out.

Editing function

Duplex transmission and duplex printing are possible.

FAX data file storage capacity

360 MB file storage capacity is added (for transmission: 240 MB, for reception: 120 MB)

Note:

Note: For hard drivers, GB means 1 billion bytes.

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 5

Phone Book (1,000 addresses)

Up to 1,000 addresses can be registered in the Phone Book using the large LCD control panel.

Multi-address transmission function

Data are sent to multiple addresses (400 destinations) in sequence in a single operation. There are three ways to choose/enter the address

-Choose from the Phone Book (up to 400 destinations)

-Direct dialing (up to 400 destinations)

-Mix operation (Phone Book, Direct dialing, Group destinations: up to 400 destinations)

Memory reception function

When the recording paper has run out or a paper jam has occurred, the memory receives and stores the data.

Auto-dialing function

-Delayed dialing

Documents are transmitted automatically to the preset number at the preset time.

-Redialing

When the receiving side is busy during the automatic dialing, the machine keeps dialing at a fixed interval for a specified number of times.

Receiving tone/completion tone

Sound notifies that the reception of a FAX document or printing of a received document has been completed.

List output

The following data stored in the RAM can be printed out

-Phone book information

-Function list

-Transmission journal

-Reception journal

-Memory transmission report

- Power failure list

etc.

Power saver mode

During hours in which the reception amount is small, the weekly timer works to shut off the main power and the heater power to save power consumption.

Drawer selection

It is possible to choose a drawer on to whose paper the received images are to be printed.

[Options]

2nd line

One extra line can be added by installing the 2nd line unit (option).

GD-1150/1151/1200/1201/1160/1260

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

SPECIFICATIONS AND OUTLINE OF SYSTEM

 

1 - 6

1.4

Accessories and Parts

 

The following accessories and parts come with the FAX unit:

1

 

Accessory

 

Qty

Operator’s manual (for facsimile function)

1 pc.

Modular cord (2 m)

1 pc.

Unpacking instruction

1 set

 

Parts

Qty

Fax unit

 

1 pc.

SG3 label

1 pc.

FCC Part 68 label (U.S.A.): NA only

1 pc.

IC label (Canada): NA only

1 pc.

DTS label (EU): EU only

1 pc.

Teleprompt label (New Zealand): AU only

1 pc.

Notice to users label (New Zealand): AU only

1 pc.

Screw

 

4 pc.

Ground plate

1 pc.

*Apply the each label to the specified positions following the Unpacking/Setup Instruction.

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 7

04/06

1.5Options

Extends the FAX functions when the FAX unit is installed.

e-STUDIO3511/4511/350/450

Option

Function

Model

 

 

 

Reversing Automatic

Feeds originals

MR-3015

Document Feeder (RADF)

 

 

 

 

 

Finisher

Sorts out documents to be output for the

MJ-1022

 

FAX/copying operation

(e-STUDIO3511/350)

 

 

MJ-1023/1024

 

 

 

2nd line for FAX board

Adds one extra communication line

GD-1160NA/TW/EU/C

 

 

 

Job Separator

Sorts out documents to be output for the

MJ-5004

 

FAX/copying operation

 

 

 

 

e-STUDIO230/280

Option

Function

Model

 

 

 

Reversing Automatic

Feeds originals

MR-3016

Document Feeder (RADF)

 

 

 

 

 

Finisher

Sorts out documents to be output for the

MJ-1022

 

FAX/copying operation

MJ-1025

 

 

 

2nd line for FAX board

Adds one extra communication line

GD-1160NA/TW/EU/C

 

 

 

Job Separator

Sorts out documents to be output for the

MJ-5004

 

FAX/copying operation

 

 

 

 

e-STUDIO281c/351c/451c

Option

Function

Model

 

 

 

Reversing Automatic

Feeds originals

MR-3018

Document Feeder (RADF)

 

 

 

 

 

Finisher

Sorts out documents to be output for the

MJ-1022

 

FAX/copying operation

(e-STUDIO281c/351c)

 

 

MJ-1023/1024

 

 

 

2nd line for FAX board

Adds one extra communication line

GD-1160NA/TW/EU-N/C

 

 

GD-1260NA/TW/EU-N/C

 

 

 

GD-1150/1151/1200/1201/1160/1260

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

SPECIFICATIONS AND OUTLINE OF SYSTEM

 

1 - 8

08/12

e-STUDIO352/353/452/453

 

 

Option

Function

Model

1

Reversing Automatic

Feeds originals

MR-3018

 

Document Feeder (RADF)

 

 

 

Finisher

Sorts out documents to be output for the

MJ-1022/1101

 

 

FAX/copying operation

(e-STUDIO352)

 

 

 

MJ-1023/1024

 

2nd line for FAX board

Adds one extra communication line

GD-1160NA/TW/EU/C

 

 

 

GD-1260NA/TW/EU/C

 

Job Separator

Sorts out documents to be output for the

MJ-5004

 

 

FAX/copying operation

 

 

e-STUDIO202L/203L/232/233/282/283 series

Option

Function

Model

 

 

 

Reversing Automatic

Feeds originals

MR-3020

Document Feeder (RADF)

 

 

 

 

 

Finisher

Sorts out documents to be output for the

MJ-1022

 

FAX/copying operation

MJ-1025

 

 

 

2nd line for FAX board

Adds one extra communication line

GD-1160NA/TW/EU/C

 

 

GD-1260NA/TW/EU/C

 

 

 

Job Separator

Sorts out documents to be output for the

MJ-5004

 

FAX/copying operation

 

 

 

 

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 9

08/03

1.6System List

e-STUDIO3511/4511/350/450

Finisher

(Hanging type) e-STUDIO3511/350 only MJ-1022

 

Reversing Automatic

 

Document Feeder

 

MR-3015

Finisher

 

(Console type)

 

MJ-1023

 

Finisher

 

(Console saddle stitch type)

 

MJ-1024

 

Bridge Kit

 

KN-3511

 

e-STUDIO3511/4511

 

only

 

 

FAX Board

Job Separator

GD-1150NA/TW/EU

/AU/AS/C

MJ-5004

 

e-STUDIO350/450

2nd Line for FAX Board

only

GD-1160NA/TW/EU/C

 

Bridge Kit

 

KN-3520

 

e-STUDIO350/450

 

only

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drawer Module

 

 

 

 

 

 

Paper Feed

 

 

 

 

Large Capacity

 

 

 

 

 

 

 

 

Desk

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MY-1021

 

 

 

Pedestal (PFP)

 

 

 

 

Feeder (LCF)

 

 

 

 

 

MH-1700

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

KD-1011

 

 

KD-1012 A4/LT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 1-1

GD-1150/1151/1200/1201/1160/1260

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

SPECIFICATIONS AND OUTLINE OF SYSTEM

 

1 - 10

e-STUDIO230/280

Finisher

(Hanging type) Reversing Automatic Document Feeder

MJ-1022

MR-3016

 

Finisher

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Console saddle stitch type)

 

 

 

 

 

 

 

 

 

Bridge Kit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MJ-1025

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

KN-3520

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Job Separator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FAX Board

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GD-1150NA/TW/EU

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MJ-5004

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/AU/AS/C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2nd Line for FAX Board

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GD-1160NA/TW/EU/C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drawer Module

 

 

 

Paper Feed

 

 

 

Large Capacity

 

 

 

Desk

 

 

 

 

 

MY-1021

 

 

Pedestal (PFP)

 

 

Feeder (LCF)

 

 

MH-1700

 

 

 

 

 

KD-1011

 

 

KD-1012 A4/LT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 1-2

1

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 11

e-STUDIO281c/351c/451c

Finisher

(Hanging type) e-STUDIO281c/351c only MJ-1022

Reversing Automatic

Document Feeder

MR-3018

 

Finisher

 

(Console type)

 

MJ-1023

Finisher

 

(Console saddle stitch type)

 

MJ-1024

Bridge Kit

 

KN-3511

FAX Board

GD-1200

FAX Board

GD-1201

2nd Line for FAX Board GD-1160

2nd Line for FAX Board GD-1260

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Drawer Module

 

 

 

 

 

 

Paper Feed

 

 

 

 

Large Capacity

 

 

 

 

 

 

 

 

Desk

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MY-1021

 

 

 

 

Pedestal (PFP)

 

 

 

 

Feeder (LCF)

 

 

 

 

 

MH-1700

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

KD-1011

 

 

KD-1012 A4/LT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 1-3

GD-1150/1151/1200/1201/1160/1260

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

SPECIFICATIONS AND OUTLINE OF SYSTEM

 

1 - 12

08/12

e-STUDIO352/353/452/453

Finisher

(Hanging type) e-STUDIO352/353 only MJ-1022

 

 

 

Reversing Automatic

 

 

 

Document Feeder

 

 

 

MR-3018

 

Finisher

 

 

 

(Console type)

 

 

 

MJ-1023

 

 

Finisher

 

 

 

(Console saddle stitch type)

 

Bridge Kit

 

MJ-1024

 

 

 

KN-3520

 

 

 

 

 

Finisher

Job Separator

 

 

MJ-5004

 

 

(Console type)

 

 

 

 

 

MJ-1101

 

FAX Board

 

 

 

 

 

 

GD-1200NA/TW/EU

 

 

 

/AU/AS/C/KR

 

 

 

2nd Line for FAX Board

 

 

 

GD-1160NA/TW/EU/C

 

 

 

FAX Board

 

 

 

GD-1201NA/TW/EU

 

 

 

/AU/AS/C/KR

 

 

 

2nd Line for FAX Board

 

 

 

GD-1260NA/TW/EU/C

Drawer Module

Paper Feed

Large Capacity

Desk

MY-1021

Pedestal (PFP)

Feeder (LCF)

MH-1700

 

KD-1011

KD-1012 A4/LT

 

Fig. 1-4

1

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 13

08/03

e-STUDIO202L/203L/232/233/282/283 series

 

Finisher

 

 

Reversing Automatic

 

 

(Hanging type)

 

 

 

Document Feeder

 

 

 

MJ-1022

 

 

MR-3020

 

Automatic

 

Duplexing Unit

 

MD-0102

Finisher

Bridge Kit

(Console saddle stitch type)

KN-3520

MJ-1025

 

 

Job Separator

 

MJ-5004

 

FAX Board

 

GD-1150NA/TW/EU

 

/AU/AS/C/KR

 

2nd Line for FAX Board

 

GD-1160NA/TW/EU/C

 

FAX Board

 

GD-1151NA/TW/EU

 

/AU/AS/C/KR

2nd Line for FAX Board GD-1260NA/TW/EU/C

 

Drawer Module

 

 

 

Paper Feed

 

 

 

Large Capacity

 

 

 

Desk

 

 

 

 

 

MY-1021

 

 

Pedestal (PFP)

 

 

Feeder (LCF)

 

 

MH-1700

 

 

 

 

 

KD-1011

 

 

KD-1012 A4/LT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 1-5

GD-1150/1151/1200/1201/1160/1260

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

SPECIFICATIONS AND OUTLINE OF SYSTEM

 

1 - 14

08/03

Toshiba GD-1150, GD-1201, GD-1151, GD-1260, GD-1160 User Manual

1.7

Units and Components

 

 

Reversing Automatic

1

 

Document Feeder (RADF)

 

Control panel

1st Drawer 2nd Drawer

Fig. 1-6

Fig. 1-7

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 15

1.8Layout of PC Boards

e-STUDIO3511/4511/350/450/200L/202L/203L/230/232/233/280/282/283

MDM

FAX

NCU

Fig. 1-8 Rear side of the equipment

Symbol

Name

Function

Remarks

 

 

 

 

FAX

FAX control board

Control the FAX function

 

 

 

 

 

MDM

Telephone circuit control board

Controls dialing for the analog cir-

 

 

 

cuit (for 2nd line)

 

 

 

 

 

NCU

Telephone circuit control board

Controls dialing for the analog cir-

 

 

 

cuit (Lower board: standard 1st

 

 

 

line, Upper board: for 2nd line)

 

 

 

 

 

GD-1150/1151/1200/1201/1160/1260

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

SPECIFICATIONS AND OUTLINE OF SYSTEM

 

1 - 16

08/03

e-STUDIO281c/351c/451c, e-STUDIO352/353/452/453

MDM

FAX

1

FAX PWR

NCU

Fig. 1-9 Rear side of the equipment

Symbol

Name

Function

Remarks

 

 

 

 

FAX

FAX control board

Controls the FAX function

 

 

 

 

 

MDM

Telephone circuit control board

Controls dialing for the analog cir-

 

 

 

cuit (for 2nd line)

 

 

 

 

 

NCU

Telephone circuit control board

Controls dialing for the analog cir-

 

 

 

cuit (Lower board: standard 1st

 

 

 

line, Upper board: for 2nd line)

 

 

 

 

 

FAX PWR

FAX power board

Supplies the power (-12V, +24V)

 

 

 

of FAX

 

 

 

 

 

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

SPECIFICATIONS AND OUTLINE OF SYSTEM

1 - 17

08/03

GD-1150/1151/1200/1201/1160/1260

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

SPECIFICATIONS AND OUTLINE OF SYSTEM

 

1 - 18

2.LSU-RELATED FUNCTIONS

2.1Recording Mode

This machine offers various printing modes such as the selection of the applicable recording paper and

 

the recording method, etc. to meet users’ needs. To take full advantage of these features, it is important

 

to understand the concepts of the recording paper selection algorithm and printing algorithm as

2

described in 2. 2.

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved

GD-1150/1151/1200/1201/1160/1260

 

LSU-RELATED FUNCTIONS

2 - 1

04/06

Loading...
+ 63 hidden pages