Toshiba CSGS15BC23, CSGV90BC3, CSGX36BC3, CSGU15BC18, CSGS20BC2 User Manual

0 (0)
D4153659A
CCD Camera
GiantDragon B/W series
CSGV90BC3
CSGX36BC3
CSGS20BC2
CSGS15BC23
Instruction Manual
Thank you for purchasing our product.
Before using this CCD Color Camera, please read through this instruction manual
carefully in order to use this product correctly and safely.
After reading, keep this instruction manual handy so that you can refer to, whenever
you need it.
Contents
Safety Precautions
1. Overview·····························································································1
2. Features ·······························································································1
3. Configuration ······················································································2
4. Optional part························································································2
5. Explanation rear panel·········································································3
6. Connection ··························································································4
7. Functions·····························································································5
8. Timing chart ························································································8
9. Troubleshooting··················································································10
10. Specifications···················································································11
11. Outline Drawing···············································································17
Printed on recycled paper
D4153659A
Safety Precautions
Before using this product, read these safety precautions carefully. Important information is shown in this Instruction
Manual to protect users from bodily injuries and property damages, and to enable them to use the product safely and
correctly.
Please be sure to thoroughly understand the meanings of the following signs and symbols before reading the main
text that follow, and observe the instructions given herein.
[Definition of Safety Signs]
Notes *1: “Serious injury” refers to cases of loss of eyesight, wounds, burns (high or low temperature),
electric shock, broken bones, poisoning, etc., which leave after-effects or which require
hospitalization or a long period of outpatient treatment of cure.
*2: "Light to moderate injuries" refers to injuries, burns, electric shock etc. that do not require
hospitalization or long-term treatment.
*3: "Property damage" refers to cases of extensive damage involving damage to buildings, equipment,
farm animals, pet animals and other belongings.
[Explanation of Safety Symbols]
Safety Signs Description
WARNING
Indicates a potentially hazardous situation that may result in death or
serious injury (*1) in the event of improper handling.
CAUTION
Indicates a potentially hazardous situation that may result in light to
moderate injuries (*2) or only in property damage (*3)in the event of
improper handling.
Safety Symbols Description
PROHIBITED
This sign indicates PROHIBITION (Do not).
The content of prohibition is shown by a picture or words beside the
symbol.
MANDATORY
This sign indicates MANDATORY ACTION (You are required to
do).
The content of action is shown by a picture or words beside the
symbol.
D4153659A
[General Handing]
WARNING
Unplug
!
!!
! Stop operation immediately when any abnormality or defect occurs.
If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign
matter, or if the equipment is dropped or malfunctions, fire or electric shock may result.
Be always sure to disconnect the power cable from the wall socket at once and contact your
dealer.
Do not get wet
!
!!
! Do not use the equipment in locations subject to water splashes.
Otherwise, fire or electric shock may result.
Never pull apart
!
!!
! Do not disassemble, repair, or modify the equipment.
Otherwise, fire or electric shock may result.
For internal repair, inspection, or cleaning, contact your sales representative.
Avoid
!
!!
! Do not place anything on the equipment.
If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric shock
may result.
Avoid
!
!!
! Do not install the equipment in an unstable or inclined location or locations subject to
vibration or impact.
Otherwise, the equipment may topple over and cause personal injury.
Do not touch
!
!!
! During an electrical storm, do not touch the power cable and the connection cable.
Otherwise, an electric shock may result.
Instruction
!
!!
! Use the specified voltage.
Use of an unspecified voltage may result in fire or electric shock.
Avoid
!
!!
! Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled,
placed under heavy objects or heated the power cable and the connection cable.
Otherwise, fire or electric shock may result.
D4153659A
[General Handing]
CAUTION
Instruction
!
!!
! Observe the following when installing the equipment:
· Do not cover the equipment with a cloth, etc.
· Do not place the equipment in a narrow location where heat is likely to accumulate.
Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.
Avoid
!
!!
! Do not place the equipment in locations subject to high moisture, oil fumes, steam, or
dust.
Otherwise, fire or electric shock may result.
Avoid
!
!!
! Do not install the equipment in locations exposed to direct sunlight or humidity.
Otherwise, the internal temperature of the equipment will rise, which may cause a fire.
Instruction
!
!!
! Use only specified the power cable and the connection cables.
Otherwise, fire or electric shock may result.
Instruction
!
!!
! When performing connection, turn off power.
When connecting the power cable and the connection cable, turn off the equipment power.
Otherwise, fire or electric shock may result.
Avoid
!
!!
! Do not expose its camera head to any intensive light (such as direct sunlight).
Otherwise, its inner image pickup device might get damaged.
Avoid
!
!!
! Avoid short-circuiting signal output.
Otherwise, a malfunction may occur.
Avoid
!
!!
! Avoid giving a strong shock against the camera body.
It might cause a breakdown or damage. If your camera is used in a system where its camera
connector is subjected to strong repetitive shocks, its camera connector is possible to break
down. If you intend to use your camera in such a situation, if possible, bundle and fix a camera
cable in the place near the camera, and do not transmit a shock to the camera connector.
Instruction
!
!!
! Contact your sales representative to request periodic inspection and cleaning (every
approx five years).
Accumulation of dust inside the equipment may result in fire or electric shock.
For inspection and cleaning costs, contact your sales representative.
D4153659A
CASES FOR INDEMNITY (LIMITED WARRANTY)
We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in
the following cases.
! In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party,
deliberate or accidental misuse by the user, or use under extreme operating conditions.
! In the case of indirect, additional, consequential damages (loss of business interests, suspension of business
activities) are incurred as result of malfunction or non-function of the equipment, we shall be exempted from
responsibility for such damages.
! In the case damage or losses are caused by failure to observe the information contained in the instructions in
this instruction manual and specifications.
! In the case damage or losses are caused by use contrary to the instructions in this instruction manual and
specifications.
! In the case damage or losses are caused by malfunction or other problems resulting from use of equipment
(connected equipments including Gigabit Ethernet Interface board, the lens, etc.) or software that is not
specified.
! In the case damage or losses are caused by repair or modification conducted by the customer or any
unauthorized third party (such as an unauthorized service representative).
! Expenses we bear on this product shall be limited to the individual price of the product.
RESTRICTION FOR USE
! Should the equipment be used in the following conditions or environments, give consideration to safety
measures and inform us of such usage:
1. Use of the equipment in the conditions or environment contrary to those specified, or use outdoors.
2. Use of the equipment in applications expected to cause potential hazard to people or property, which
require special safety measures to be adopted.
! This product can be used under diverse operating conditions. Determination of applicability of equipment or
devices concerned shall be determined after analysis or testing as necessary by the designer of such
equipment or devices, or personnel related to the specifications. Such designer or personnel shall assure the
performance and safety of the equipment or devices.
! This product is not designed or manufactured to be used for control of equipment directly concerned with
human life (*1) or equipment relating to maintenance of public services/functions involving factors of
safety (*2). Therefore, the product shall not be used for such applications.
(*1): Equipment directly concerned with human life refers to.
· Medical equipment such as life-support systems, equipment for operating theaters.
· Exhaust control equipment for exhaust gases such as toxic fumes or smoke.
· Equipment mandatory to be installed by various laws and regulations such as the Fire Act or
Building Standard Law
· Equipment related to the above
(*2) :Equipment relating to maintenance of public services/functions involving factors of safety refers to.
· Traffic control systems for air transportation, railways, roads, or marine transportation
· Equipment for nuclear power generation
· Equipment related to the above
D4153659A
Notes on using this product
!
!!
! Handle carefully
Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause
malfunctions. Further, do not damage the connection cable, since this may cause wire breakage.
!
!!
! Environmental operating conditions
Do not use the product in locations where the ambient temperature or humidity exceeds the specifications.
Otherwise, image quality may be degraded or internal components may be adversely affected. In particular,
do not use the product in areas exposed to direct sunlight. Moreover, during shooting under high
temperatures, vertical stripes or white spots (noise) may be produced, depending on the subject or camera
conditions (such as increased gain). However, such phenomena are not malfunctions.
!
!!
! Check a combination with the lens
Depending on the lens and lighting you use, an image is reflected as a ghost in the imaging area. However,
this is not because of a fault of the camera.
In addition, depending on the lens you use, the performance of the camera may not be brought out fully due
to deterioration in resolution and brightness in the peripheral area, aberration and others.
Be sure to check a combination with the camera by using the lens and lightning you actually use.
When installing a lens in the camera, make sure carefully that it is not tilted.
In addition, use a mounting screw free from defects and dirt. Otherwise, the camera may be unable to be
removed.
!
!!
! Do not shoot under intense light
Avoid intense light such as spot lights on part of the screen because it may cause blooming or smears. If
intense light falls on the screen, vertical stripes may appear on the screen, but this is not a malfunction.
!
!!
! Occurrence of moiré
If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a malfunction.
!
!!
! Occurrence of noise on the screen
If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may
be generated on the screen. If this occurs, move the camera or the cable.
!
!!
! Handling of the protective cap
If the camera is not in use, attach the lens cap to the camera to protect the image pickup surface.
!
!!
! If the equipment is not to be used for a long duration
Turn off power to the camera for safety.
!
!!
! Maintenance
Turn off power to the equipment and wipe it with a dry cloth.
If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted
neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may
damage or discolor the paint and indications.
If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative.
!
!!
! Disposal
When disposing of the camera, it may be necessary to disassemble it into separate parts, in accordance with
the laws and regulations of your country and/or municipality concerning environmental contamination.
D4153659A
Following information is only for EU-member states:
The use of the symbol indicates that this product may not be treated as household waste. By
ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about the
take-back and recycling of this product, please contact your supplier where you purchased the
product.
This equipment has been tested and found to comply with the limits for a class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communication.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be require to correct the interference at his own expense.
D4153659A
环保使用期限标识,是根据电子信息产品污染控制管理办法以及,电
信息产品污染控制标识要求(SJ/T11364-2006)电子信息产品环保使用期
限通则,制定的适用于中国境内销售的电子信息产品的标识。
电子信息产品只要按照安全及使用说明内容,正常使用情况下,从生
期算起,在此期限内,产品中含有的有毒有害物质不致发生外泄或
变,不致对环境造成严重污染或对其人身、财产造成严重损害。
产品正常使用后,要废弃在环保使用年限内或者刚到年限的产品时,
根据国家标准采取适当的方法进行处置。
另外,此期限不同于质量/功能的保证期限。
The Mark and Information are applicable for People's Republic of China
only.
<产品中有毒有害物质或元素的名称及含量
产品中有毒有害物质或元素的名称及含量产品中有毒有害物质或元素的名称及含量
产品中有毒有害物质或元素的名称及含量>
有毒有害物质或元素
部件名称
铅(Pb 汞(Hg 镉(Cd
六价铬
Cr(VI)
多溴联苯
PBB
多溴二苯醚
(PBDE
相机本体
×
:表示该有毒有害物质在该部件所有均质材料中的含量均在电子信息产品中有毒有害物质的
限量要求标准规定的限量要求(SJ/T11363-2006)以下
×表示该有毒有害物质至少在该部件的某一均质材料中的含量超出电子信息产品中有毒有害物
质的限量要求标准规定的限量要求(SJ/T11363-2006)
This information is applicable for People's Republic of China only.
リサイクル
リサイクルリサイクル
リサイクルに
に関
関する
するする
する情報
情報情報
情報(
(包装物
包装物包装物
包装物)
有关再利用的信息
有关再利用的信息有关再利用的信息
有关再利用的信息(包装物
包装物包装物
包装物)
Information on recycling of wrapping composition
中华人民共和国
环保使用期限
10
段ボール
ボールボール
ボール
瓦楞纸板
瓦楞纸板瓦楞纸板
瓦楞纸板
Corrugated
Corrugated Corrugated
Corrugated
cardboard
cardboardcardboard
cardboard
CB
箱/
箱子
箱子箱子
箱子
Box
BoxBox
Box
内部緩衝材料
内部緩衝材料内部緩衝材料
内部緩衝材料
内部缓冲材料
内部缓冲材料内部缓冲材料
内部缓冲材料
Internal buffer
Internal buffer Internal buffer
Internal buffer
materials
materialsmaterials
materials
OTHERS
D4153659A
1
1. Overview
This GiantDragon B/W series is an integrated-(one-body)-type monochrome camera that adopts all pixel data
readout inter line CCD. There are 4 models according to the sensor type. These are CSGV90BC3 (VGA),
CSGX36BC3 (XGA), CSGS20BC2 (SXGA: 1/2 type), CSGU15BC18 (UXGA), and CSGS15BC23 (SXGA: 2/3
type). For video output, the Gigabit Ethernet
®*
interface standard “IEEE802.3ab” is adopted for high transfer rate,
and it is easy to integrate into industrial equipment.
* Ethernet
®
is a registered trademark of XEROX Corporation.
2. Features
!
High frame rate and high resolution
Supported high frame rate CSGV90BC3 (90fps/VGA), CSGX36BC3 (36fps/XGA), CSGS20BC2
(20fps/SXGA: 1/2 type), CSGU15BC18 (15fps/UXGA), and CSGS15BC23 (15fps/SXGA: 2/3 type).
!
All pixel readout
All pixel signals (in the effective area) are output in one frame processing.
!
Full frame shutter
Since all pixels are output even by shutter operation, high resolution can be achieved, without deteriorating
the vertical resolution.
!
Square grids
The CCD pixels arrayed in square grids facilitates computation for image processing.
!
Gigabit Ethernet i nterface
Performs video output and camera control via the Gigabit Ethernet standard IEEE802.3ab interface. Data
transfer is at 1Gbps that can output uncompressed video data of high frame rate.
!
GigEVision Ver 1.0 conformity
This product is based on GigEVision Camera Interface Standard for Machine Vision Ver 1.0 that is industrial
camera standard. Therefore, control of this camera is easy.
!
GenICam Ver 1.0 conformity
This product is based on GenICam Generic Interface for Cameras Ver 1.0 that is industrial camera standard.
Therefore, control of this camera is easy.
!
Binning mode
This mode realizes high-speed frame rate by adding two vertical lines or four vertical lines.
D4153659A
2
!
Random trigger shutter
The random trigger shutter function provides images in any timing by input of an external trigger signal.
Trigger control from PC is possible.
!
Scalable
Selectable video output area. It can be higher frame rate by reducing vertical output area. And can be reduce
occupied data rate of Gigabit Ethernet by reducing horizontal output area.
!
Compact and lightweight
This camera is compact and lightweight, and it is easy to integrate into industrial equipment.
!
EU RoHS & Chinese ROHS compliant
3. Configuration
(1) Camera body ············································ 1
(2) Accessories
-Instruction Manual (Japanese) ·················· 1
-Instruction Manual (English) ···················· 1
* No application software is attached to this camera.
4. Optional part
(1) Camera mounting kit·································· Model name: CPT8420
(2) Camera cable············································· Model name: CPRC3910-**
(3) Camera adapter·········································· Model name: CA130C
* Contact your dealer / distributor for details of option units.
D4153659A
3
5. Explanation rear panel
(1) Ethernet Gigabit Ethernet Interface connector
- Connector model P65-P01-19V8 (Supplied by SpeedTech Corp.)
- Pin assignment
Pin No. I/O Function
1 I/O BI_DA+
2 I/O BI_DA-
3 I/O BI_DB+
4 I/O BI_DC+
5 I/O BI_DC-
6 I/O BI_DB-
7 I/O BI_DD+
8 I/O BI_DD-
- Indication LED1: GREEN (ACT LED) LED1 indicates the state of ACT.
During transfer: Lighting
- Indication LED2: YELLOW (LINK LED) LED2 indicates the state of LINK.
During Link: Lighting
* LINK LED indicates establishment of Link of 1000BASE. Therefore, in the case of 100BASE/10BASE,
LINK LED does not light.
(2) DC_IN / TRIGGER
- Connector (Camera side) HR10A-7R-6PB(73)
(Supplied by HIROSE ELECTRIC CO., LTD.)
- Plug (Cable side) HR10A-7P-6S(73)
(Supplied by HIROSE ELECTRIC CO., LTD.)
or equivalents
* This camera cable is not an accessory of this product.
- Pin assignment
Pin No.
Signal Name
[Standard specification]
1 BUSY_OUT
2 GND
3 GND
4 TRIG_IN
5 EXPOSE_OUT
6 +12V
(2)(1)
Rear View
LED1
LED2
*Above figure is connector view from insert side.
1 6
2
3 4
5
D4153659A
4
6. Connection
Connect this camera as shown in the figure below.
(The figure below shows an example of connection. For details, contact our sales representative.)
Notes on Connection:
- If your camera is used in a system where its connectors are subjected to strong repetitive shocks,
its connectors are possible to break down. If you use your camera in such a situation, use an
LAN cable with a lock screw, and secure the camera cable as close as possible to the camera
body for avoid physical shock to the camera connector.
- Since the Optional parts and Gigabit Ethernet interface board, cable not attached to this product,
please prepare it if necessary.
PC
CCD Camera
GiantDragon
(Rear-side)
Option
Camera Cable
CPRC3910-**
LAN Cab le
Camera Adapter
CA130C
Gigabit Ethernet
interface board
Tw is t-pair
Category 5e or over
Option
SERIAL No.
CA130C
CAMERAVDHDTRIGG ER
CLOCK OUTAC100V IN
WEN VIDEO OUT
TYPE 2232A5 900
AC100V 0.15A
AC100V
50/60Hz
D4153659A
5
7. Functions
Control and setting of functions can be done by the camera control based on the Gigabit Ethernet digital camera
protocol (GigEVision Ver.1.00).
(1) Image output
A format of the output image and frame rate which this GiantDragon B/W series supports is as follows.
Model CSGV90BC3 CSGX36BC3 CSGS20BC2 CSGU15BC18 CSGS15BC23
GVSP_PIX_MONO8: Mono 8 bit
Image output format
GVSP_PIX_MONO10:Mono 10 bit
Frame rate
(at the all pixel readout)
Maximum
90fps
Maximum
36fps
Maximum
20fps
Maximum
15fps
Maximum
15fps
Notes on Frame Drops of Image:
- Depends on your PC or Gigabit Ethernet interface board configurations, images may not be
captured normally (e.g. frame drops may occur). In this case, change to frame rate setting
lower.
(2) Setup-level setting
You can set the Setup-level in 192 steps in the range between 6.3 and 25%.
(3) Gain setting
When shipping it, the gain is set to 0dB. You can set the gain in 91 steps in the range between 0 and +12dB.
(4) Binning mode
This mode realizes high-speed frame rate by adding two vertical lines or four vertical lines.
CSGV90BC3 CSGX36BC3 CSGS20BC2 CSGU15BC18 CSGS15BC23
Binning mode
1/2 1/2 1/2 1/4 1/2
Readout vertical line number
240 384 480 300 512
Maximum frame rate
170fps 64 fps 34fps 46fps 32fps
(5) Image resending control
As the resending control of the image, this camera resends the packet which suffered a loss.
D4153659A
6
(6) Electronic shutter mode switching
You can switch the shutter modes by adjusting the setting value of the command status register of the
camera via the Gigabit Ethernet. The setting method has two kinds of the following.
- Normal shutter
Performs exposure control via the internal synchronization signal.
PRESET mode 1/100, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000
and 1/20,000s
Absolute value setting Any value is set up in 32-bit floating point form within the range
of 1/20000s to 2s
- Random trigger shutter:
Random trigger shutter can capture images at any timing using the external trigger signal and soft trigger
input. It is effective for image input of moving objects and obtaining images of the same timing using
multiple cameras. But there is an exposure delay time.
The random trigger shutter of this camera can be operated in two types of mode. How to determine the
exposure time differs depending on the mode.
Fixed mode: The exposure time depends on the normal shutter speed setting.
Pulse width mode: The exposure time depends on the pulse width.
Notes on long exposure:
- When you set the exposure time longer than approximately 1 second, white spots and the
unevenness in highlight portion might occasionally be observed on screen. This phenomenon
is due to the characteristics of the CCD image-pickup device, and do not reflect performance
error in the pickup device or CCD Camera itself.
D4153659A
7
(7) Scalable mode
This camera has the scalable mode that can read out defined area of the screen. Only continuous rectangle
units can be selected, concave or convex shape cannot be selected.
- Window size: {A x m(H)} x {B x n(V)}
* A and B are minimum unit size.
* m, n=integer
* The image of maximum unit size or less can be selected.
* Only one window can be selected.
CSGV90BC3 CSGX36BC3 CSGS20BC2 CSGU15BC18 CSGS15BC23
Minimum unit size
(H) x (V)
160 x 120 256 x 192 160 x 120 200 x 150 170 x 128
Maximum unit size
(H) x (V)
640 x 480 1024 x 768 1280 x 960 1600 x 1200 1360 x 1024
- Start address: {32 x i(H)} x {24 x j(V)}
* i, j=integer
* The image of maximum unit size or less can be selected.
( X , Y )=( 32 * i , 24 * j )
A * m
B * n
In the scalable mode, this camera reads out only the necessary portions at the standard speed while it scans
through other unnecessary portions at high speed, so the trigger interval can be shorter if the vertical cutout
width is small. However, the trigger interval cannot be short in the horizontal direction even if the cutout
width is small due to the operation mechanism of the CCD sensor.
Notes on scalable mode:
- White lines may occur in the upper portions of the screen when strong light exists in a wide area
during the scalable mode. This is not a malfunction. If white lines occur, adjust the amount of
incident light using the lens.
(X, Y) = (32 x i, 24 x j)
A x m
B x n
D4153659A
8
8. Timing chart
Image data outputs of this camera series are transferred with the UDP protocol of Gigabit Ethernet. Timing
numerical value below is prescribed by absolute prerequisite that GiantDragon series use transmission band
without restriction of other node. When there is a node transferring with GiantDragon concerned, it is not same the
numerical value prescribed below.
(1) In the normal shutter mode
Video format: MONO 8, all pixel readout
T2T1
GbE bus
Expose
Image
Image Image
T
DLY1
T
DLY2
T2
Model name T1 [ms] T2 [ms] Frame rate [ms]
CSGV90BC3 0.5 2.8 11.1
CSGX36BC3 0.5 6.7 27.8
CSGS20BC2 1.0 10.4 50.0
CSGU15BC18 1.0 16.0 66.7
CSGS15BC23 1.0 11.7 56.7
* T1 is the maximum value, and T2 (GVSP_FRAME_RATE) is the minimum value.
* Frame rate is maximum speed.
* At the setting the GVSP_SIZE (SCPSx) = 1500 byte / packet.
(T2 is changed by GVSP_SIZE (SCPSx).)
* Set the value that T
DLY1
(GVSP_BLOOK_START_DELAY) to satisfy the next numerical formula;
T1 + T
DLY1
+ T2 >= Frame rate
D4153659A
9
(2) In the random trigger shutter mode
- When fixed mode (Video format: MONO 8, all pixel readout);
Image
GbE bus
Expose
TRIG_IN
T3
T1 T2T
DLY1
- When pulse width mode (Video format: MONO 8, all pixel readout);
Image
GbE bus
Expose
TRIG_IN
T4
T3
T1 T2T
DLY1
Model name T3 [us] T4 [us]
CSGV90BC3 0.9 2.8
CSGX36BC3 1.5 25.2
CSGS20BC2 3.4 5.1
CSGU15BC18 1.9 7.5
CSGS15BC23 3.8 23.8
* The value of T1 and T2 are the same as the value at the of the normal shutter setting.
Loading...
+ 39 hidden pages