Toshiba C655D-S5230, SATELLITE C650, PSC0YU019002, SATELLITE C640, C655D-S5228 User Manual

0 (0)

Satellite® C640/C650

Series User’s Guide

If you need assistance:

Toshiba’s Support Web site pcsupport.toshiba.com

Toshiba Customer Support Center

Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273

For more information, see “If Something Goes Wrong” on page 157 in this guide.

GMAD00246010

03/10

2

Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

Model: Satellite® C640/C650 Series

Recordable and/or ReWritable Drive(s) and Associated Software Warranty

The computer system you purchased may include Recordable and/or ReWritable optical disc drive(s) and associated software, among the most advanced data storage technologies available. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed or provided electronically. If you fail to do so, this product may not function properly and you may lose data or suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.

Protection of Stored Data

For your important data, please make periodic back-up copies of all the data stored on the hard disk or other storage devices as a precaution against possible failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR

LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR THE FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY.

3

Critical Applications

The computer you have purchased is not designed for any “critical applications.” “Critical applications” means life support systems, medical applications, connections to implanted medical devices, commercial transportation, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or loss of life or catastrophic property damage.

ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE OF THE COMPUTER PRODUCTS IN ANY CRITICAL APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE.

FCC Notice “Declaration of Conformity Information”

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTE Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ports. Changes or modifications made to this equipment not expressly approved by Toshiba or parties authorized by Toshiba could void the user's authority to operate the equipment.

4

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including interference that may cause undesired operation.

Contact either:

Toshiba’s Support Web site at pcsupport.toshiba.com.

Or call the Toshiba Customer Support Center: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273

Industry Canada Requirement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.

FCC requirements

The following information is pursuant to FCC CFR 47, Part 68 and refers to internal modems and is only applicable if your computer has a modem.

This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, the information must be provided to the telephone company.

The modem connects to the telephone line by means of a standard jack called the USOC RJ11C.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC part 68 rules and requirements adopted by the ACTA. It is designed to be connected to a compatible modular jack that is also compliant.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by the ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.

5

Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.

Telephone Company Procedures

The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally be necessary for them to make changes in their equipment, operations or procedures. If these changes might affect your service or the operation of your equipment, the telephone company will give you notice, in writing, to allow you to make any changes necessary to maintain uninterrupted service.

If Problems Arise

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advanced notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

If trouble is experienced with this equipment, for repair or standard limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Customer Support Center within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

Disconnection

If you should ever decide to permanently disconnect your modem from its present line, please call the telephone company and let them know of this change.

Fax Branding

The following information is only applicable if your computer has the capability to send and receive fax transmissions.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including Fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

6

In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer.

Alarm Equipment

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Instructions for IC CS-03 Certified Equipment

1NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.

2The user manual of analog equipment must contain the equipment’s Ringer Equivalence Number (REN) and an explanation notice similar to the following:

The Ringer Equivalence Number (REN) of this device can be found on the label affixed to your computer.

NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.

7

3The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C.

Wireless Interoperability

The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to:

The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined and approved by the Institute of Electrical and Electronics Engineers.

The Wireless Fidelity (Wi-Fi®) certification as defined by the Wi-Fi Alliance. The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.

Bluetooth® and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection.

If you should experience any such problem, immediately turn off your

Bluetooth or Wireless LAN device.

Please contact Toshiba computer product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.

NOTE The above caution applies to products that operate with an 802.11a radio device.

8

Wireless LAN and Your Health

Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.

Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

Using the Wireless LAN equipment on board airplanes, or

In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment.

Exposure to Radio Frequency Radiation

The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Regulatory Information

The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.

9

Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be co-located with any other transmitter that has not been tested with this device.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

L’ utilisation de ce dispositif est soumis aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même s’il est susceptible de compromettre son fonctionnement.

The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met.

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Pour empecher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit etre utilize a l’interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d’emission) est installe a l’exterieur, il doit faire l’objet d’une licence.

This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. Industry Canada requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.

NOTE The above caution applies to products that operate with an 802.11a radio device.

10

EU Declaration of Conformity

TOSHIBA declares that this product conforms to the following Standards:

Supplementary

*The product complies with the

Information:

requirements of the Low Voltage

 

Directive 73/23/EEC, the EMC Directive

 

89/336/EEC and/or the R&TTE Directive

 

1999/5/EC.

This product is carrying the CE-Mark in accordance with the related European Directives. The party responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany.

The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive Information

The European Union WEEE (Waste from Electrical and Electronic Equipment) Directive is intended to protect the quality of the environment and human health through the responsible use of natural resources and the adoption of waste management strategies that focus on recycling and reuse. This Directive requires producers of electrical and electronic products put on the market in European Union (EU) member countries after August 2005 to mark such products with a crossed-out wheeled bin with a black bar symbol. If the product’s battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled bin symbol on the battery.

Pb, Hg, Cd

In the European Union, these symbols indicate that when the last end user wishes to discard this product, it must be sent to appropriate facilities for recovery and recycling. This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States.

Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products. Please contact your local government for applicable laws and regulations governing the disposal of this product. For information on how to trade-in or recycle your product, visit www.reuse.toshiba.com.

11

VCCI Class B Information

Modem Warning Notice

This information is only applicable if your computer has a modem.

Conformity Statement

The equipment has been approved to [Commission Decision “CTR21”] for panEuropean single terminal connection to the Public Switched Telephone Network (PSTN).

However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

In the event of problems, you should contact your equipment supplier in the first instance.

Taiwan

Article 14

Unless approved, for any model accredited low power radio frequency

 

electric machinery, any company, trader or user shall not change the

 

frequency, increase the power or change the features and functions of the

 

original design.

 

 

Article 17

Any use of low power radio frequency electric machinery shall not affect

 

aviation safety and interfere with legal communications. In the event

 

interference is caused, the use of such electric machinery shall be

 

immediately discontinued. Operation of such products can be resumed

 

only when they are modified and can no longer cause interference.

 

 

The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations.

Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery.

12

Using this Equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification systems (premises radio station and specified low-power radio station).

1. Sticker

Please put the following sticker on devices incorporating this product.

The frequency bandwidth of this equipment may operate within the same range as industrial devices, scientific devices, medical devices, microwave ovens, licensed radio stations and non-licensed specified low-power radio stations for mobile object identification systems (RFID) used in factory product lines (Other Radio Stations).

1.Before using this equipment, ensure that it does not interfere with any of the equipment listed above.

2.If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions.

3.Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.

2.Indication

The indication shown below appears on this equipment.

(1)(2) (3)

2.4DSOF4

(4)

12.4: This equipment uses a frequency of 2.4 GHz.

2DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation.

3The interference range of this equipment is less than 40m.

4 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz.

It is possible to avoid the band of mobile object identification systems.

13

The indication shown below appears on this equipment.

(1)(2) (3)

2.4FH1

(4)

12.4: This equipment uses a frequency of 2.4 GHz.

2FH: This equipment uses FH-SS modulation.

3The interference range of this equipment is less than 10m.

4This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz.

3. TOSHIBA Direct PC

Monday – Friday: 10:00 – 17:00

Toll Free Tel: 0120-15-1048

Direct Dial: 03-3457-4850

Fax: 03-3457-4868

Device Authorization

This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan.

The name of the radio equipment: refer to the equipment label provided on the computer

Approved by both the JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS EQUIPMENT and the TELECOM ENGINEERING CENTER

The following restrictions apply:

Do not disassemble or modify the device.

Do not install the embedded wireless module into other device.

5.17 GHz to 5.23 GHz for indoor use only.

14

Radio Approvals for Wireless Devices

NOTE The following information is dependent on what type of wireless device is in your computer. Not all devices are available on all models.

Approved Countries/Regions for the Intel® Wireless Wi-Fi® Link 5100/5300 Series

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

Andorra

Argentina CNC:

Australia

 

533AN_HMW: “CNC C-6367”

 

 

533AN_MMW: “CNC C-6366”

 

 

512AN_HMW: “CNC C-6373”

 

 

512AN_MMW: “CNC C-6374”

 

 

 

 

Austria

Azerbaijan

Bahrain

 

 

 

Belgium

Bermuda

Bosnia

 

 

 

Brazil

Bulgaria

Caicos Islands

 

 

 

Cambodia

Canada

Cayman Islands

 

 

 

Chile

China

Colombia

 

 

 

Costa Rica

Croatia

Curacao, Netherlands

 

 

Antilles

 

 

 

Cyprus

Czech Republic

Denmark

 

 

 

Dominican Republic

Ecuador

El Salvador

 

 

 

Egypt

Estonia

Falkland Islands

 

 

 

Finland

France

French Guinea

 

 

 

French Polynesia

Germany

Ghana

 

 

 

Gibraltar

Greece

Guadeloupe

 

 

 

Guam

Guatemala

Herzegovina

 

 

 

Honduras

Hong Kong

Hungary

 

 

 

Iceland

India

Indonesia

 

 

 

Ireland

Israel

Italy

 

 

 

Japan

Jordan

Kenya

 

 

 

Kuwait

Latvia

Lebanon

 

 

 

Liechtenstein

Lithuania

Luxemburg

 

 

 

15

Malawi

Malaysia

Malta

 

 

 

Martinique

Mayotte

Mexico

 

 

 

Monaco

Montenegro

Montserrat

 

 

 

Morocco

Netherlands

New Caledonia

 

 

 

New Zealand

Nicaragua

Norway

 

 

 

Oman

Pakistan

Panama

 

 

 

Paraguay

Peru

Philippines

 

 

 

Poland

Portugal

Puerto Rico

 

 

 

Qatar

Réunion

Romania

 

 

 

Russia

Saint Martin

Saipan

 

 

 

San Marino

Saudi Arabia

Serbia

 

 

 

Singapore

Slovakia

Slovenia

 

 

 

South Africa

South Korea

Spain

 

 

 

Sri Lanka

Sweden

Switzerland

 

 

 

Tahiti

Taiwan

Turkey

 

 

 

Turk Islands

Ukraine

UAE

 

 

(United Arab Emirates)

 

 

 

United Kingdom

Uruguay

USA

 

 

 

Vatican

Venezuela

Vietnam

 

 

 

Virgin Islands

Zimbabwe

 

 

 

 

Approved Countries/Regions for the Intel® Wireless Wi-Fi® Link 622ANHMW and 633ANHMW Series

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

Canada USA

16

Approved Countries/Regions for the Atheros® Wireless Wi-Fi® Link AR5B95 Series

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

Albania

Argentina CNC:

Australia

 

693 GI/2007

 

 

3655 GI/2007

 

 

 

 

Austria

Azerbaijan

Bahrain

Bangladesh

Belgium

Bolivia

Bosnia

Brazil

Brunei

Bulgaria

Cambodia

Canada

Chile

China

Colombia

Croatia

Cyprus

Czech Republic

Denmark

Dominican Republic

Ecuador

Egypt

El Salvador

Estonia

Finland

France

Germany

Ghana

Greece

Guatemala

Herzegovina

Honduras

Hong Kong

Hungary

Iceland

India

Indonesia

Iraq

Ireland

Italy

Jamaica

Japan

Jordan

Kazakhstan

Kenya

Kuwait

Kyrgyzstan

Latvia

Lebanon

Lesotho

Liechtenstein

Lithuania

Luxembourg

Macedonia

Malaysia

Malta

Mexico

Monaco

Montenegro

Mozambique

Nambia

Nepal

Netherlands

New Zealand

Nicaragua

Nigeria

Norway

Oman

Pakistan

Panama

Papua New Guinea

Paraguay

Peru

Philippines

Poland

Portugal

Puerto Rico

Qatar

Romania

Russia

Saudi Arabia

Senegal

Serbia

Singapore

Slovak Republic

Slovenia

South Africa

South Korea

Spain

Sri Lanka

Sweden

Switzerland

Taiwan

Thailand

Turkey

UAE (United Arab

 

 

Emirates)

 

 

 

17

Ukraine

United Kingdom

Uruguay

USA

Venezuela

Vietnam

Yemen

Zimbabwe

 

Europe - Restrictions for use of 2.4 GHz Frequencies in

European Community Countries

 

 

België/

For private usage outside buildings across public grounds over less than

Belgique:

300m no special registration with IBPT/BIPT is required. Registration to

 

IBPT/BIPT is required for private usage outside buildings across public

 

grounds over more than 300m. For registration and license please

 

contact IBPT/BIPT.

 

 

 

Voor privé-gebruik buiten gebouw over publieke groud over afstand

 

kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik

 

over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig.

 

Voor registratie of licentie kunt u contact opnemen met BIPT.

 

 

 

Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, au-

 

dessus d’un espace public, aucun enregistrement n’est nécessaire pour

 

une distance de moins de 300m. Pour une distance supérieure à 300m un

 

enregistrement auprès de l’IBPT est requise. Pour les enregistrements et

 

licences, veuillez contacter l’IBPT.

 

 

Deutschland:

License required for outdoor installations. Check with reseller for

 

procedure to follow.

 

 

 

Anmeldung im Outdoor-Bereich notwendig, aber nicht

 

genehmigungspflichtig. Bitte mit Händler die Vorgehensweise

 

abstimmen.

 

 

France:

Restricted frequency band: only channels 1 to 7 (2400 MHz and 2454

 

MHz respectively) may be used outdoors in France. Please contact

 

A.R.T. (http://www.art-telecom.fr) for applicable procedures to follow.

 

 

 

Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz

 

respectivement) doivent être utilisés endroits extérieur en France. Vous

 

pouvez contacter l’Autorité de Régulation des Télécommunications

 

(http://www.art-telecom.fr) pour la procédure à suivre.

 

 

Italia:

License required for indoor use. Use with outdoor installations not

 

allowed.

 

 

 

È necessaria la concessione ministeriale anche per l’uso interno.

 

Verificare con i rivenditori la procedura da seguire.

 

 

Nederland:

License required for outdoor installations. Check with reseller for

 

procedure to follow.

 

 

 

Licentie verplicht voor gebruik met buitenantennes. Neem contact op

 

met verkoper voor juiste procedure.

 

 

18

Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries

European Community

 

5150-5250 MHz

5250-5350 MHz

5470-5725 MHz

Countries

 

Channels: 36, 40, 44,

Channels: 52, 56, 60,

Channels: 100, 104, 108, 112,

 

 

48

64

116, 120, 124, 128, 132, 136, 140

 

 

Indoor Only

Indoor Only

Indoor/Outdoor

 

 

 

 

 

Austria

 

O

x

x

 

 

 

 

 

Belgium, France,

 

O

O

x

Switzerland/Liechtenstein

 

 

 

 

 

 

 

 

Denmark, Finland,

 

O

O

O

Germany, Greece,

 

 

 

 

Ireland, Italy,

 

 

 

 

Luxembourg,

 

 

 

 

Netherlands, Norway,

 

 

 

 

Portugal, Sweden, UK

 

 

 

 

 

 

 

 

 

Iceland, Spain

 

O

O

O

 

 

 

 

 

O: allowed

x: forbidden

 

 

To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply. The user should use the wireless LAN utility to check the current channel of operation. If operation is occurring outside of the allowable frequencies as listed above, the user must cease operating the Wireless LAN at that location and consult the local technical support staff responsible for the wireless network.

The 5 GHz Turbo mode feature is not allowed for operation in any European Community country.

This device must not be operated in ad-hoc mode using channels in the

5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point.

This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands. This device will operate under the control of the Access Point in order to avoid operating on a channel occupied by any radar system in the area. The presence of nearby radar operation may result in temporary interruption of operation of this device. The Access Point’s radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation.

19

Approved Countries/Regions for the Realtek® RTL8192E

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

Albania

Argentina

Australia

 

 

 

Austria

Azerbaijan

Bahrain

 

 

 

Bangladesh

Belgium

Bolivia

 

 

 

Bosnia

Brazil

Bulgaria

 

 

 

Cambodia

Canada

Chile

 

 

 

China

Colombia

Costa Rica

 

 

 

Croatia

Cyprus

Czech Republic

 

 

 

Denmark

Dominican Republic

Ecuador

 

 

 

Egypt

El Salvador

Estonia

 

 

 

Finland

France

Germany

 

 

 

Ghana

Greece

Herzegovina

 

 

 

Honduras

Hong Kong

Hungary

 

 

 

Iceland

India

Indonesia

 

 

 

Ireland

Israel

Italy

 

 

 

Japan

Jordan

Kazakhstan

 

 

 

Kenya

Kuwait

Kyrgyzstan

 

 

 

Latvia

Lebanon

Lesotho

 

 

 

Liechtenstein

Lithuania

Luxembourg

 

 

 

Macedonia

Malaysia

Malta

 

 

 

Mexico

Monaco

Morocco

 

 

 

Mozambique

Netherlands

New Zealand

 

 

 

Nicaragua

Norway

Oman

 

 

 

Pakistan

Panama

Papua New Guinea

 

 

 

Paraguay

Peru

Philippines

 

 

 

Poland

Portugal

Puerto Rico

 

 

 

Qatar

Romania

Saudi Arabia

 

 

 

Serbia

Singapore

Slovak Republic

 

 

 

Slovenia

South Africa

South Korea

 

 

 

Spain

Sri Lanka

Sweden

 

 

 

Switzerland

Taiwan

Thailand

 

 

 

Trinidad

Turkey

UAE (United Arab

 

 

Emirates)

 

 

 

United Kingdom

Uruguay

USA

 

 

 

Venezuela

Vietnam

Zimbabwe

 

 

 

20

Approved Countries/Regions for the Realtek® RTL8191SE

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

Albania

Argentina

Australia

 

 

 

Austria

Azerbaijan

Bahrain

 

 

 

Bangladesh

Belgium

Bolivia

 

 

 

Bosnia

Brazil

Bulgaria

 

 

 

Cambodia

Canada

Chile

 

 

 

China

Colombia

Costa Rica

 

 

 

Croatia

Cyprus

Czech Republic

 

 

 

Denmark

Dominican Republic

Ecuador

 

 

 

Egypt

El Salvador

Estonia

 

 

 

Finland

France

Ghana

 

 

 

Germany

Greece

Herzegovina

 

 

 

Hong Kong

Hungary

Iceland

 

 

 

India

Indonesia

Ireland

 

 

 

Israel

Italy

Jamaica

 

 

 

Japan

Jordan

Kazakhstan

 

 

 

Kenya

Kuwait

Kyrgyzstan

 

 

 

Latvia

Lebanon

Liechtenstein

 

 

 

Lithuania

Luxembourg

Macedonia

 

 

 

Malaysia

Malta

Mexico

 

 

 

Monaco

Morocco

Mozambique

 

 

 

Netherlands Antilles

Netherlands

New Zealand

 

 

 

Norway

Oman

Pakistan

 

 

 

Panama

Papua New Guinea

Paraguay

 

 

 

Peru

Philippines

Poland

 

 

 

Portugal

Puerto Rico

Qatar

 

 

 

Romania

Russia

Saudi Arabia

 

 

 

Serbia

Singapore

Slovak Republic

 

 

 

Slovenia

South Africa

South Korea

 

 

 

Spain

Sri Lanka

Sweden

 

 

 

Switzerland

Taiwan

Thailand

 

 

 

Trinidad

Tunisia

Turkey

 

 

 

21

UAE (United Arab

Ukraine

United Kingdom

Emirates)

 

 

 

 

 

Uruguay

USA

Venezuela

 

 

 

Vietnam

Zimbabwe

 

 

 

 

Approved Countries/Regions for the Realtek® RTL8187B

This equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

Albania

Algeria

Argentina

Australia

Austria

Azerbaijan

Bahrain

Bangladesh

Belgium

Bolivia

Bosnia

Brazil

Brunei

Bulgaria

Cambodia

Canada

Chile

China

Colombia

Costa Rica

Croatia

Cyprus

Czech Republic

Denmark

Dominican Republic

Ecuador

Egypt

El Salvador

Estonia

Finland

France

Germany

Ghana

Greece

Guatemala

Herzegovina

Honduras

Hong Kong

Hungary

Iceland

India

Indonesia

Ireland

Israel

Italy

Japan - Jate

Japan - Teleco

Jordan

Kazakhstan

Kenya

Kyrgyzstan

Kuwait

Latvia

Lebanon

Lesotho

Liechtenstein

Lithuania

Luxembourg

Macedonia

Malaysia

Malta

Mexico

Monaco

Morocco

Mozambique

Netherlands

New Zealand

Nicaragua

Nigeria

Norway

Oman

Pakistan

Panama

Papua New Guinea

Paraguay

Peru

Philippines

Poland

Portugal

Puerto Rico

Qatar

Romania

Russia

Saudi Arabia

Senegal

Serbia and Montenegro

Singapore

Slovak Republic

Slovenia

South Africa

South Korea

Spain

Sri Lanka

22

Sweden

Switzerland

Taiwan

Thailand

Turkey

Ukraine

 

 

 

UAE (United Arab

United Kingdom

Uruguay

Emirates)

 

 

 

 

 

USA

Venezuela

Vietnam

Yemen

Zimbabwe

 

Bluetooth® Wireless Technology Interoperability

Bluetooth® Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to:

Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group.

Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special Interest Group.

Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth products with all computers and/or equipment using Bluetooth wireless technology other than TOSHIBA portable computers.

Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

When you use Bluetooth cards from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth cards from TOSHIBA, always change the frequency, move your computer to the area outside of the interference range of 2.4 GHz Wireless LAN devices (40 meters/43.74 yards or more) or stop transmitting from your computer. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/ computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either one of your Bluetooth or Wireless LAN. Please contact Toshiba computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.

23

Approved Countries/Regions for use (Bluetooth® wireless technology)

Bluetooth® Card from Toshiba equipment is approved to the radio standard by the countries/regions in the following table.

Do not use this equipment except in the countries/regions in the following table.

Argentina

Australia

Austria

 

 

 

Belgium

Bulgaria

Canada

 

 

 

Chile

China

Cyprus

 

 

 

Czech Republic

Denmark

Egypt

 

 

 

Estonia

Finland

France

 

 

 

Germany

Greece

Hong Kong

 

 

 

Hungary

Iceland

Ireland

 

 

 

Italy

Japan

Jordan

 

 

 

Korea

Kuwait

Latvia

 

 

 

Lebanon

Liechtenstein

Lithuania

 

 

 

Luxembourg

Malta

Netherlands

 

 

 

New Zealand

Norway

Oman

 

 

 

Peru

Philippines

Poland

 

 

 

Portugal

Singapore

Slovakia

 

 

 

Slovenia

Spain

Sweden

 

 

 

Switzerland

Thailand

UK

 

 

 

Uruguay

USA

Venezuela

 

 

 

24

Bluetooth® Wireless Technology and Your Health

The products with Bluetooth® wireless technology, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by devices with Bluetooth wireless technology however is much less than the electromagnetic energy emitted by wireless devices such as mobile phones.

Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include:

Using the equipment with Bluetooth wireless technology on board airplanes, or

In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask for authorization to use the device with Bluetooth wireless technology prior to turning on the equipment.

Exposure to Radio Frequency Radiation

The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.

25

Regulatory statements

This product complies with any mandatory product specification in any country/ region where the product is sold. In addition, the product complies with the following:

European Union (EU) and EFTA

This equipment complies with the R&TTE directive 1999/5/EC and has been provided with the CE mark accordingly.

Canada — Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

Taiwan

Article 14

Unless approved, for any model accredited low power radio frequency

 

electric machinery, any company, trader or user shall not change the

 

frequency, increase the power or change the features and functions of the

 

original design.

 

 

Article 17

Any use of low power radio frequency electric machinery shall not affect

 

aviation safety and interfere with legal communications. In the event

 

interference is caused, the use of such electric machinery shall be

 

immediately discontinued. Operation of such products can be resumed

 

only when they are modified and can no longer cause interference.

 

 

The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations.

Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery.

Toshiba C655D-S5230, SATELLITE C650, PSC0YU019002, SATELLITE C640, C655D-S5228 User Manual

26

Optical Disc Drive Safety Instructions

This appliance contains a laser system and is classified as a CLASS 1 LASER PRODUCT. To use this model properly, read the user’s guide carefully and keep it for your future reference.

Never attempt to disassemble, adjust or repair an optical disc drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.

Location of the Required Label

(Sample shown below. Location of the label and manufacturing information may vary.)

Copyright

This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.

©2010 by Toshiba America Information Systems, Inc. All rights reserved.

27

Export Administration Regulation

This document contains technical data that may be controlled under the U.S. Export Administration Regulations, and may be subject to the approval of the U.S. Department of Commerce prior to export. Any export, directly or indirectly, in contravention of the U.S. Export Administration Regulations is prohibited.

Notice

The information contained in this manual, including but not limited to any product specifications, is subject to change without notice.

TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.

28

Trademarks

Satellite is a registered trademark of Toshiba America Information Systems, Inc. and/or Toshiba Corporation.

Adobe and Photoshop are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

Atheros is a registered trademark of Atheros Communications, Inc.

Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.

Intel, Intel Core, Celeron, Centrino and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Microsoft, Outlook, Windows, and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

MultiMediaCard and MMC are registered trademarks of MultiMediaCard Association.

Secure Digital and SD are trademarks of SD Card Association.

TouchPad is a trademark of Synaptics, Inc.

Wi-Fi is a registered trademark of the Wi-Fi Alliance.

All other brand and product names are trademarks or registered trademarks of their respective companies.

Computer Disposal Information

The LCD display lamp in this product may contain mercury. Disposal of this product may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.

As part of Toshiba’s commitment to preserving the environment, Toshiba supports various trade-in and recycling programs. For details, please visit www.laptops.toshiba.com/green.

Contents

 

Introduction................................................................................

36

This guide ...............................................................

38

Safety icons ............................................................

39

Other icons used...............................................

39

Your computer’s features and specifications ....

40

Other documentation ..............................................

40

Service options .......................................................

40

Chapter 1: Getting Started.........................................................

41

Selecting a place to work ........................................

41

Setting up a work environment .........................

41

Keeping yourself comfortable ...........................

42

Precautions.......................................................

42

Important information on your computer’s

 

cooling fan ..................................................

44

Setting up your computer .......................................

44

Connecting to a power source ................................

45

Charging the main battery.......................................

47

Using the computer for the first time ......................

48

Opening the display panel .................................

48

29

30

Contents

 

 

 

 

 

 

 

Turning on the power .......................................

49

 

Setting up your software...................................

49

 

Registering your computer with Toshiba ................

50

 

Adding optional external devices.............................

50

 

Adding memory (optional) ......................................

50

 

Installing a memory module .............................

51

 

Removing a memory module............................

57

 

Checking total memory .....................................

59

 

Recovering the Internal Storage Drive ....................

59

 

Recovering to out-of-box state

 

 

(recommended recovery method)...............

61

 

Recovering to a custom size partition ...............

63

 

Recovering without changing the internal

 

 

storage drive partitions ...............................

66

 

Creating recovery DVDs/media .........................

68

 

Restoring from recovery DVDs/media...............

71

 

Erasing the Internal Storage Drive ..........................

73

 

Checking the internal storage drive operating

 

 

status ................................................................

74

 

Installing drivers and applications.....................

75

 

Using the TouchPad™.............................................

75

 

Adjusting TouchPad™ settings .........................

78

 

Disabling or enabling the TouchPad™ ..............

79

 

Using external display devices ................................

79

 

Connecting an external monitor or projector.....

79

 

Directing the display output when you

 

 

turn on the computer ..................................

80

 

Adjusting the quality of the external display......

81

 

Using an external keyboard.....................................

81

 

Using a mouse ........................................................

81

 

Connecting a printer ...............................................

81

 

Setting up a printer ...........................................

82

 

Turning off the computer ........................................

83

 

Options for turning off the computer ................

83

 

Using the Shut down command........................

85

 

Using and configuring Hibernation mode .........

88

Loading...
+ 193 hidden pages