Toshiba 40VL758, 46VL758 User Manual

0 (0)
VL75* Digital
Series
2
English
Contents
INSTALLING YOUR TV
Safety Precautions ...........................................4
Installation and important information ..............5
Inserting batteries and effective range ........ 7
CONNECTING YOUR TV
Connecting external equipment ........................ 8
Bundling the cables ......................................... 9
Connecting an HDMI
®
or DVI device to the HDMI
input .......................................................... 10
To connect an HDMI device ...................... 10
To connect a DVI device ........................... 10
HDMI’s ARC (Audio Return Channel)
feature ................................................. 10
REGZA-LINK connection .................................11
Connecting a computer .................................. 12
To connect a PC to the RGB/PC terminal ...12
To connect a PC to the HDMI terminal ...... 12
Connecting a home network ........................... 13
To connect the TV to a home network -
Wired ................................................... 13
To connect the TV to a home network with an
internet connection - Wireless ................13
Controls and input connections ......................14
Switching on ...........................................14
Using the remote control ..........................14
Using the controls and connections ........... 14
SETTING UP YOUR TV
Startup Application ........................................15
Quick Setup ............................................15
Ant/Cable In (if available) ........................16
Auto Tuning ............................................ 17
ATV Manual Tuning ....................................... 17
Tuning ....................................................17
Skip ........................................................19
Sorting positions ......................................19
DTV Manual Tuning ....................................... 20
Manual Tuning ........................................20
Manual Tuning for DVB-C ........................ 20
DTV Settings .................................................. 20
Channels ................................................ 20
Standby Channel Update ......................... 21
DVB Character Set ...................................21
Dynamic Scan .........................................21
Location setting ....................................... 21
Analogue switch-off ...............................21
CONTROLS AND FEATURES
General controls ............................................ 22
Quick Menu ............................................ 22
Selecting positions ................................... 22
The Time Display – analogue only ........... 22
Stereo and Bilingual transmissions ............ 22
Sound controls ..............................................23
Volume controls and mute sound .............. 23
Dual ....................................................... 23
Balance .................................................. 23
Sound Navi ............................................. 23
Surround Settings .................................... 24
Dolby Volume
®
....................................... 24
Dynamic Range Control ........................... 24
Audio Level Offset ................................... 24
Audio Description .................................... 24
Widescreen viewing .......................................25
Picture controls .............................................. 27
Picture Mode ........................................... 27
Picture preferences .................................. 27
Reset ...................................................... 27
Colour Master ......................................... 27
Base Colour Adjustment ........................... 28
Colour Temperature ................................ 28
Auto Brightness Sensor Settings ................ 28
Active Backlight Control ...........................29
Black/White Level .................................... 29
Static Gamma .........................................29
MPEG NR – Noise Reduction ..................... 29
DNR – Digital Noise Reduction ................. 29
Resolution+ ............................................ 29
Active Vision M100 .................................. 29
Film Stabilization ..................................... 30
Resetting the advanced picture settings ..... 30
Expert Picture Settings .............................. 30
Control Visualization ............................... 31
Automatic Format (Widescreen) ................ 31
4:3 Stretch .............................................. 31
Blue Screen ............................................. 31
Picture Position ........................................32
Picture still ..............................................32
HDMI Information Display ........................ 32
Using your home network .............................. 33
Setting up the Network .................................. 34
Wireless Setup ........................................ 34
Advanced Network Setup ......................... 36
DNS Setup ..............................................37
Network Connection Test ......................... 38
Using the software keyboard .......................... 38
3
English
Setting up the Media Renderer feature ............39
Installation .............................................. 39
Media Renderer ....................................... 39
Device Name Setup .................................39
Web Password Setup ................................ 40
Media Controller Setup ............................40
Maximum Volume Setup ..........................40
Using BBC iPlayer ..........................................41
Using YouTube™ ........................................... 41
Using the Function Menu ......................... 42
Using the Media Player .................................. 44
Basic operation ....................................... 44
Viewing photo files .................................. 46
Viewing movie files (on a DLNA CERTIFIED™
Server or USB device) ............................47
Playing music files (on a DLNA CERTIFIED™
Server or USB device) ............................49
Using the Photo Frame feature ....................... 51
To open Photo Frame ............................... 51
Setting the features ................................. 51
Other features ...............................................53
Panel Lock ..............................................53
The timers .....................................................53
Programme Timers – digital only ............. 53
On Timer ................................................ 54
Sleep Timer .............................................54
Energy Saving Settings ...................................55
Automatic Power Down ............................ 55
No Signal Power Down ............................55
Digital on-screen information and Programme
Guide .........................................................55
Information .............................................55
Guide ..................................................... 56
Genre selection/searching .......................57
Digital settings – parental control ................... 57
Setting the PIN ........................................57
Parental Setup .........................................58
Network Lock ..........................................58
Digital settings – Channel Options ..................58
Selecting favourite channels ..................... 58
Favourite Channel Lists ............................58
Skip channels .......................................... 59
Locking channels .....................................59
Digital settings – other settings .......................59
Subtitles .................................................. 59
Audio languages ..................................... 59
Common Interface ................................... 60
Software Upgrade and Licences ......................60
Auto Upgrade ......................................... 60
Searching for New Software .....................60
Network Upgrade .................................... 61
Software Licences .................................... 61
System Information and Reset TV .................... 61
System Information .................................. 61
Reset TV .................................................. 61
PC Settings ................................................... 62
Horizontal and Vertical Position ................ 62
Clock Phase ............................................62
Sampling Clock ....................................... 62
Reset ...................................................... 62
Input selection and AV connections ................. 63
Input selection ........................................ 63
External input skip ...................................63
Labeling video input sources .................... 64
Colour Decoding ..................................... 64
PC Audio ................................................ 64
HDMI 2 Audio .........................................64
Side Shared Audio ................................... 64
HDMI Settings .........................................65
Digital Audio Output ...............................65
Using REGZA-LINK ........................................66
Enable REGZA-LINK ................................. 66
TV Auto Power ......................................... 66
Auto Standby .......................................... 66
Amplifier Control ..................................... 66
Speaker Preference .................................. 66
REGZA-LINK input source selection ........... 66
REGZA-LINK playback device control ........ 67
REGZA-LINK one touch play ..................... 67
REGZA-LINK system standby ..................... 67
REGZA-LINK system audio control ............. 67
Toshiba PC compatible with REGZA-LINK ....... 67
TEXT SERVICES
Text services ..................................................68
Selecting modes ...................................... 68
Text information ...................................... 68
Navigating pages using Auto ................... 68
Navigating pages using LIST .................... 68
Control buttons ....................................... 69
PROBLEM SOLVING
Questions and Answers .............................. 70
INFORMATION
License Information ....................................... 73
Information ................................................... 75
Specifications and accessories ........................ 78
4
English
INSTALLING YOUR TV
Safety Precautions
This equipment has been designed and manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the
best results and for safety to be assured. Please read
the points below for your own safety. They are of a
general nature, intended to help with all electronic
consumer products, and some points may not apply to
the goods you have just purchased.
Leave more than 10cm clearance around the television
to allow adequate ventilation. This will prevent
overheating and possible damage to the television.
Dusty places should also be avoided.
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.
The mains supply required for this equipment is 220-
240v AC 50/60Hz. Never connect to a DC supply or
any other power source. DO ensure that the television
is not standing on the mains lead. Use only the
supplied lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter, the
removal of which will impair its performance.
In the UK, the fuse fitted in the plug is approved by
ASTA or B SI to BS1 362. It s hould on ly be rep laced by a
correctly rated and approved type and the fuse cover
must be refitted.
IF IN DOUBT, PLEASE CONSULT A COMPETENT
ELECTRICIAN.
DO
read the operating instructions before you attempt
to use the equipment.
DO
ensure that all electrical connections (including the
mains plug, extension leads and inter-connections
between pieces of equipment) are properly made and
in accordance with the manufacturers’ instructions.
Switch off and withdraw the mains plug before making
or changing connections.
DO
consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO
be careful with glass panels or doors on
equipment.
DO NOT
obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DO NOT
allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids, such
as vases, to be placed on the equipment.
DO NOT
place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
DO NOT
use makeshift stands and NEVER fix legs with
wood screws. To ensure complete safety, always fit the
manufacturer’s approved stand, bracket or legs with
the fixings provided according to the instructions.
DO NOT
leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, and make
sure your family knows how to do this. Special
arrangements may need to be made for people with
disabilities.
DO NOT
continue to operate the equipment if you are
in any doubt about it working normally, or if it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
ABOVE ALL – NEVER let anyone, especially
children, push or hit the screen and cabinet back,
or push anything into holes, slots or any other
openings in the case. These actions will damage
screen or internal parts.
NEVER connect the supplied COMPONENT
Adaptor cable or AV Adaptor cable to a wall
outlet. These cables are ONLY for insertion into
the socket provided for the purpose on the rear/
side of the TV.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
Air Circulation
Heat Damage
Mains Supply
Do
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND 'LIVE' PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY
OPERABLE.
Do not
WARNING:
To prevent the spread of
fire, keep candles or other open
flames away from this product at all
times.
5
INSTALLING YOUR TV
English
Installation and important information
Locate the television away from direct sunlight and strong
lights. Soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent
direct sunlight falling on the screen.
Place the TV on a stable, level surface that can
support the weight of the TV. In order to prevent
Injury and maintain stability of this apparatus,
secure the TV to the level surface using the strap if
fitted, or to a wall using a sturdy tie to the P clips
provided.
The LCD display panels are manufactured using an
extremely high level of precision technology; however,
sometimes some parts of the screen may be missing picture
elements or have luminous spots. This is not a sign of a
malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break
or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. The enclosed cleaning cloth is for cabinet cleaning.
We recommend that you
do not
use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Please use a wall bracket appropriate for the size and weight
of the LCD TV.
Two people are required for installation.
Never use the four screws attached to the TV.
To install a wall-mount from another manufacturer, use the
SPACERS
(supplied).
1
Unplug and remove any cables and/or other component
connectors from the rear of the TV.
2
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket.
3
Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate bracket(s)
are attached to the wall and the back of the TV as
described in the instructions provided with the wall
bracket.
4
Make sure to place the spacers supplied between the
bracket and the back of the TV.
5
Always use the screws supplied or recommended by the
wall mount manufacturer.
Removing the Pedestal Stand:
1
Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the
stand protruding over the edge of the surface.
NOTE:
Extreme care should always be used when
removing the pedestal stand to avoid damage to the LCD
panel.
2
Remove the five screws.
3
Once you have removed all five screws holding the
pedestal stand in place, remove the pedestal stand from
the TV by sliding the pedestal stand away from the TV.
Where to install
Stand clip
‘P’ Clip
Sturdy tie (as short as possible)
Fixing strap
Stand style is dependent on model
Fixing strap
When using a Wall Bracket
Remove four screws.
(Do not reuse these screws for
attaching a wall bracket.)
Place four spacers (supplied).
Screw
Spacer
(supplied)
TV back panel
Wall bracket
Five screws
6
INSTALLING YOUR TV
English
The digital reception function of this television is only effective in the countries listed in the “Country” section of
the “SETUP” menu. Depending on country/area, some of this television's functions may not be available. Reception
of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on-screen menus, etc. are left on the television screen for any length of time, they could become
conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3
outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of
other size modes (eg: Super Live) will prevent permanent retention.
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) fire;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited
to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or
misuse of the product.
NOTE:
A Toshiba wall bracket or stand, where available, must be used to maintain the product's BEAB approval.
7
INSTALLING YOUR TV
English
The remote control
Simple at-a-glance reference for your remote
control.
1
For On/Standby mode
2
To select external input sources
3
Selectable Picture preferences
4
Widescreen viewing
5
s
Stereo/bilingual transmissions
6
To select TV Mode
7
To access the analogue or digital Channel List
8
To access More Information Menu
9
Number buttons
10
Switch the Audio Description On/Off
11
To return to previous programme position
12
To alter the TV volume
13
To display on-screen information
To access the index page in Text mode
14
To mute the TV sound
15
To access Quick Menu
16
To change programme positions
To change TEXT pages
17
To display the digital on-screen Programme Guide
18
To exit menus
19
To page up, down, left or right
20
When using menus, the arrows move the cursor on the screen
up, down, left or right. Press
OK
to confirm your selection
21
On-screen Menus
22
To return to previous Menu
23
Colour buttons:
Text and interactive service control buttons
24
To call up text services
25
To access Media Player Menu
26
Digital Subtitles or Analogue TEXT Subtitle pages if available
28
When using REGZA-LINK:
1
To turn On/Standby
AUDIO
To access
AUDIO
Menu
SET UP
To access
SET UP
Menu
V
To EJECT
ROOT
To access
ROOT
Menu
CONTENTS
To access
CONTENTS
Menu
TOP
To access
TOP
Menu
DVD
To access
DVD
Menu
Remove the back cover to
reveal the battery compartment
and make sure the batteries are
inserted the proper way.
Suitable battery types for this
remote are AAA, IEC R03 1.5V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove dead batteries immediately to prevent
acid from leaking into the battery compartment. Dispose of
them in accordance with instructions on page 74 of this
manual.
Warning:
batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond
a distance of five metres or outside an angle of 30 degrees
from the centre of the television. If the operating range
becomes reduced, the batteries may need replacing.
5
13
4
1
14
16
18
23
20
28
2
7
11
9
2
3
8
6
10
12
22
21
26
24
19
17
25
15
7
27
When in TV mode:
r
Picture still
D
Analogue time
display
When in Text mode:
A
To reveal concealed
text
B
To hold a wanted
page
C
To enlarge text
display size
D
To select a page
whilst viewing a
normal picture
When using Programme
Guide:
Z
- 24 hours
z
+ 24 hours
CC
- 1 page
cc
+ 1 page
During Playback:
c
To PLAY
v
To STOP
W
/
w
To PAUSE/STEP
Z
To SKIP-BACK
CC
To REWIND
cc
To FAST FORWARD
z
To SKIP-FORWARD
Inserting batteries and effective range
8
English
CONNECTING YOUR TV
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Aerial cables:
- - - - - - - - - - - - - - - - - - - - - -
Connect the aerial to the socket on the rear of the television.
If you use a decoder and/or a media recorder, it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads:
. . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder
IN
/
OUT
socket to the television.
Connect the decoder
TV
socket to the television.
Use the SCART Adaptor cable (supplied).
Before running
Auto Tuning
, put your decoder and media
recorder to
Standby
.
*COMPONENT VIDEO INPUT
connection:
Use the COMPONENT Adaptor cable (supplied).
The AUDIO terminals are shared with the
VIDEO INPUT
.
**VIDEO INPUT
connection:
Use the A/V Adaptor cable (supplied).
The AUDIO terminals are shared with the
COMPONENT
INPUT
.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: this output is always
active.
HDMI
®
(High-Definition Multimedia Interface) is for use with a
DVD decoder or electrical equipment with digital audio and
video output.
For acceptable video or PC signal formats through the HDMI
terminals, see page 76.
NOTE:
Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
LAN
port is used to connect the TV to your home network.
This TV can play digital content stored on a DLNA CERTIFIED™
product with server function.
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owner
’s
manuals for
all
additional equipment must be
referred to for exact instructions.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press
o
to select between
DTV
,
EXT 1
,
EXT 2
,
EXT 3
,
HDMI 1
,
HDMI 2
,
HDMI 3
,
HDMI 4
,
PC
or
ATV
.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
VIDEO INPUT**
COMPONENT VIDEO INPUT*
HDMI
®
INPUT SOCKETS
media recorder
POWER switch
LAN port
OPTICAL DIGITAL AUDIO OUTPUT
Aerial/Cable
SCART Adaptor cable
(supplied)
PC/HDMI2 AUDIO (shared)
FIXING STRAP
POWER cord
9
CONNECTING YOUR TV
English
Bundling the cables
Install the cable clamps, and put the cables in these.
Stand type
Wall Mount type
Cable Clamps
Cable Clamps
10
CONNECTING YOUR TV
English
Connecting an HDMI
®
or DVI
device to the HDMI input
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device or uncompressed digital video
from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant
[1]
consumer electronic
devices (such as a set-top box or DVD pl aye r with H DMI or DVI
output). For acceptable video signal formats, see page 76.
NOTE:
Some early HDMI equipment may not work properly with
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
INSTAPORT™
and
Enable Content Type
options to “
Off
”.
Your early HDMI source should operate properly with your
television. See page 65.
Supported Audio format: Linear PCM, Dolby Digital (AC-3),
sampling rate 32/44.1/48kHz.
Connect an HDMI cable (type A connector) to the HDMI terminal.
For proper operation, it is recommended that you use an HDMI
cable with the HDMI Logo ( ).
If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this model.
HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
See “HDMI 2 Audio” on page 64.
To view the HDMI device video, press the
o
button to select
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
Connect an HDMI-to-DVI adaptor cable (HDMI type A
connector) to the HDMI 2 terminal and audio cables to the PC/
HDMI 2 (AUDIO) socket (see illustration).
The recommended HDMI-to-DVI adaptor cable length is
6.6 ft (2m).
An HDMI-to-DVI adaptor cable transfers video only.
Separate analogue audio cables are required.
See “HDMI 2 Audio” on page 64.
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.
When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.
This feature enables the audio signal of the TV to be sent to the
AV amplifier via the HDMI cable. It will not be necessary to
connect a cable from the audio output of the TV to the audio
input of the AV amplifier to reproduce the audio received from
the tuner of the TV through the AV amplifier.
To connect an HDMI device
HDMI cable
HDMI device
the back of your television
To connect a DVI device
HDMI’s ARC (Audio Return Channel) feature
HDMI-to-DVI
adaptor Cable
Audio cable for HDMI to
television connection
(not supplied)
DVI device
HDMI cable
AV amplifier that supports ARC
11
CONNECTING YOUR TV
English
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the television’s remote control
if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and
operations, see pages 66–67.
For the setup shown above, you will need three HDMI cables.
NOTE:
If several devices are connected, the REGZA-LINK feature
may not operate properly.
For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( ).
This function is available when one PC and one AV amplifier
are connected separately. However, it may not operate
properly if the PC is connected via the AV amplifier.
Before controlling the device(s):
After completing the above connections, set the REGZA-LINK
Setup menu as you desire (see page 66).
The connected devices must also be set. For details, see the
operation manual for each device.
The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
AV amplifier
Playback device
Playback device
the back of your television
12
CONNECTING YOUR TV
English
Connecting a computer
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the television
and hear the sound from the television’s speakers.
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI 2 (AUDIO) socket. Select
PC
from the
PC/HDMI 2 Audio
options in the
AV Connection
menu located in the
SETUP
menu.
To use a PC, set the monitor output resolution on the PC before
connecting it to the television. For acceptable PC signal
formats, see page 75.
To display the optimum picture, use the PC setting feature (see
page 62).
NOTE:
The PC audio input terminal on the television is shared with
the HDMI 2 analogue audio input terminal (see page 64).
Some PC models cannot be connected to this television.
An adaptor is not needed for computers with a compatible
mini D-sub15-pin terminal.
Depending on the DVD’s title and the specifications of the PC
on which you are playing the DVD-Video, some scenes may
be skipped or you may not be able to pause during multi-
angle scenes.
A band may appear at the edges of the screen or parts of the
picture may be obscured. This is due to scaling of the picture
by the set, it is not a malfunction.
When PC input mode is selected, some of the television’s
features will be unavailable e.g.
Colour System
in the
SETUP
menu.
Some PC models may output unique signals that the
television may be unable to detect (see page 75).
When connecting a PC to the HDMI terminal on the television,
use an HDMI-to-DVI adaptor cable and an analogue audio
cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not
necessary.
For acceptable PC and video signal formats, see page 76.
NOTE:
The edges of the images may be hidden.
If connecting a certain PC model with a unique PC signal, the
PC signal may not be detected correctly.
To connect a PC to the RGB/PC terminal
the back of your television
Computer
Audio cable for PC t o
television connection
(not supplied)
Conversion adaptor if
required
(not supplied)
Mini D-sub 15 pin
connector
RGB PC cable
(not supplied)
To connect a PC to the HDMI terminal
the back of your television
Computer
Audio cable for PC to
television connection
(not supplied)
HDMI-to-DVI
adaptor cable
13
CONNECTING YOUR TV
English
Connecting a home network
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DLNA CERTIFIED™ server and play/display them on
your TV.
NOTE:
If you connect to a shared network outside your home, it is
advisable to use a router. Always use DLNA CERTIFIED™
products in private network environments.
If you use a hub or switch to connect the TV to your home
network, you may not be able to use the automatic setup
and will have to manually set up the network address. See
page 37.
If you use a router with built-in DHCP functionality, use the
automatic setup. Manual setup may not work.
If you connect the TV and PC directly, use a crossover LAN
cable.
[1] Coaxial or telephone cable (depending on your modem type)
[2] Standard LAN cable
[3] Do NOT connect a phone jack directly to the TV’s LAN port.
Please refer to “Wireless Setup” section on page 34.
To connect the TV to a home network -
Wired
the back of your television
Cable or
Phone jack
[2]
[2][3]
[2][1]
Modem (if available)
Router with hub
Server PC
To connect the TV to a home network with
an internet connection - Wireless
Access point (AP)
Wireless LAN router
Modem
PC
TOSHIBA Dual
Band WLAN adaptor
the back of your television
14
CONNECTING YOUR TV
English
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
If the RED LED is not lit, check that the mains plug is connected
to the power supply and push the
!
(POWER) button on the
left side of the television to switch the television on. If the
picture does not appear, press
1
on the remote control; it may
take a few moments. The BLUE LED will be lit.
To put the television into Standby, press
1
on the remote
control. To view the television, press
1
again. The picture may
take a few seconds to appear.
Press
MENU
on the remote control to display the menu.
The menu appears as a list of five topics. As each symbol is
selected by pressing
C
or
c
on the remote control, its
respective options will appear below.
NOTE:
The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are not
available in a mode, they will appear greyed out.
To use the option, press
B
and
b
on the remote control to
move up and down and press
C
or
c
to select your desired
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.
To alter the volume gently touch –
2
+.
To alter the programme position touch
b
p
B
.
Touch
MENU
and –
2
+ or
b
p
B
to control the sound and
picture options.
Touch
MENU
to finish.
The Media Player feature provides access to photo, movie and
music files stored on a USB storage device that is connected via
USB 1 (USB 2 provides access to photos only).
NOTE:
The USB socket has limited functionality and Toshiba can
take no responsibility for damage to other connected equipment.
The USB 2 socket has to be used with the “TOSHIBA Dual Band
WLAN Adaptor WLM-10U2” in order to access a wireless
network.
You must use the TOSHIBA Wireless LAN device to ensure
correct operation of this feature. This feature is available only
when the “TOSHIBA Dual Band WLAN Adaptor“ is used.
To select an external input, press
o
until the appropriate input
source is selected.
Please always refer to the owner’s manual of the equipment to
be connected for full details.
RED LED – Standby
BLUE LED – Power on
ORANGE LED – Programme timer set
(
digital
only)
RED LED – Programme timer Active
(
digital
only)
POWER switch
(Full Power Down Option)
COMMON INTERFACE
The Common Interface is for a Conditional
Access Module (CAM).
Contact a service provider.
The software updating of CI Plus CAM
may be automatically executed. At this
time, your Recording/Reminder
programming will be canceled.
GREEN LED – On Timer set
Control panel (touch sensor)
Ambient Light Sensor
USB 2 Wireless LAN adaptor
ready for a home network
USB 1 Media Player
Switching on
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Turning the television off at its mains supply, or un-plugging
it, will cut energy use to nearly zero for all televisions. This is
recommended when the television is not being used for a
long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE:
Putting the television into standby mode will reduce
energy consumption, but will still draw some power.
Using the remote control
Using the controls and connections
15
English
SETTING UP YOUR TV
Startup Application
Before switching on the television, put your decoder
and media recorder, if applicable, to
Standby
.
To set up the television, use the buttons on the
remote control as detailed on page 7.
a
Press the
1
button. The
Menu Language
screen will
appear. This screen will appear the first time that the
television is switched on and each time
Reset TV
is
selected.
b
Press
B
,
b
,
C
, or
c
to select the menu language, and
then press
OK
.
c
Highlight
Country
and
C
or
c
to select. The television
is now set to tune the stations for your country.
NOTE:
•The following display menus will differ slightly
according to the country you selected.
•If there is not a country that you want to select in the
list, select
Others
.
d
Press
OK
, and the
Location
screen will appear.
e
Press
C
or
c
to select
Home
or
Store
. For normal
home use, select
Home
.
f
Press
OK
. If
Store
is s elected in step 5 , a
Store mode
confirmation window will appear. If you select
Yes
from that window, the TV will proceed to the
Auto
Demo
setup screen.
g
Press
OK
, and the
TV Mounting
screen will appear,
press
C
or
c
to select
Stand
or
Wall
.
h
Press
OK
, and the
AutoView
screen will appear, press
C
or
c
to select
Yes
or
No
.
i
Press
OK
. If the
Ant/Cable
screen appears, press
B
or
b
to select
Antenna
or
Cable
, and then press
OK
to check ( ).
j
Select
Next
and press
OK
. The
Auto Tuning
start up
screen will appear with the option to select between
DTV and ATV
,
DTV
or
ATV
if available. Use
C
or
c
to select the appropriate mode.
k
Press
B
or
b
to highlight
Start Scan
, and then press
OK
.
The television will start to search for available
DTV
and/or
ATV
channels. The progress bar will indicate
the scan status.
You must allow the television to complete the search.
When the search is complete, the television will
automatically select position one.
The
Auto Tuning
screen will display the total number
of services found.
l
Press
C
or
c
to view the
DTV
(digital channel) or
ATV
(analogue channel) lists.
Quick Setup
Quick Setup
Country
UK
Primary Subtitle Language
English
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
Location
Home
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
TV Mounting
Stand
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the
SOUND menu.
AutoView
No
AutoView mode automatically adjusts picture settings
to suit ambient light conditions.
Do you wish to enable AutoView mode?
Ant / Cable
Cable
Next
Antenna
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: C7
DTV Tune 3% 2
16
SETTING UP YOUR TV
English
m
Use
B
or
b
to move through the list to select a
channel, and then press
OK
to view.
In
ATV
mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using
ATV Manual Tuning
.
REMEMBER:
Press
TV
at any time to select between
ATV
and
DTV
(DTV TV/DTV RADIO/DTV TEXT if
available) modes.
NOTE:
The time will be set automatically by
transmission but can be advanced or decreased by
using
Local Time Setting
in the
DTV Settings
screen.
From this menu, you can set the RF input configuration to cable.
a
Press
MENU
, and select
SETUP
menu.
b
Use
b
to highlight
Ant/Cable In
and use
C
or
c
to
select
Antenna
or
Cable
.
NOTE:
When you attempt to change the
Ant/Cable
In
setting, a warning message will appear followed by
PIN entry (if PIN has been set) and a prompt for
Auto
Tuning
.
c
When
Ant/Cable In
is set to
Cable
, the following
setting options will be provided in the
Auto Tuning
screen.
Press
B
or
b
to select an item, and then press
C
or
c
to select your desired option.
With the exception of
DTV Scan Type
and
DTV Modulation
items, all of the following items will have 2 operating modes.
The first is
Auto
where the values for each item are preset by
the system. The second is an
Input
mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the
Input
state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
DTV Scan Type:
This item determines whether a
Quick Scan
or a
Full Scan
will
be executed.
The
Quick Scan
is a simplified version of the
Full Scan
that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
greyed out when DTV Scan Type is set to “Full Scan”.
PLEASE NOTE
The
Quick Setup
menu can also be accessed at any
time from the
SETUP
menu.
Ant/Cable In (if available)
Auto Tuning
DTV and ATVTuning Mode
DTV
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan
17
SETTING UP YOUR TV
English
NOTE:
As new services are broadcast, it will be necessary to
re-tune the television in order to view them.
Auto Tuning
will completely re-tune the television and can be
used to update the channel list.
It is re com mended that Aut o
Tuning is run periodically to ensure that all new services
are added
. All current channels and settings, i.e. locked
channels, will be lost.
a
Press
MENU
and use
C
or
c
to select
SETUP
menu.
Use
b
to highlight
Auto Tuning
. Press
OK
.
b
A screen will appear warning that previous
programmes and settings will be deleted.
Use
C
or
c
to select
DTV and ATV
,
DTV
or
ATV
, if
available, then highlight
Start Scan
and press
OK
to
continue with the
Auto Tuning
.
NOTE:
If you have selected "
Others
" for the
Country
field in the
SETUP
menu, and selected a tuning mode
other than "
DTV
" , choose the optimum ATV
broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete, the
Auto Tuning
screen
will display the services found.
c
Use
b
or
B
to move through the list to select a
channel, and then press
OK
to view.
ATV Manual Tuning
The television can be tuned-in manually using
ATV Manual
Tuning
. For example, you might use the feature if the television
cannot be connected to a media record er/decoder with a SCART
lead or when you want to tune-in a station on another
System
.
Use
C
and
c
t
o move across the screen and select any of the
ATV Manual Tuning options
.
Then use
B
or
b
to adjust the
settings
.
1
Position
The number to be pressed on the remote control to tune
the channel.
2
System
Specific to certain areas.
3
Colour System
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4
Skip
Set Skip to On (
8
) or Off (
(
) for the selected channel.
See page 19
5
Signal Class
The channel classification.
6
Channel
The channel number on which a station is being broadcast.
7
Search
Search up and down for a signal.
8
Manual Fine Tuning
Only used if interference/weak signal is experienced. See
page 70.
9
Station
Station identification. Use the
B
or
b
and
C
or
c
buttons
to enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder, press PLAY, and then manually
tune.
Auto Tuning
SETUP
Menu Language English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
UK
Antenna
Quick Setup
Auto Tuning
DTV and ATVTuning Mode
Start Scan
Previous settings will be lost!
Press EXIT for no change.
Tuning
ATV Manual Tuning
System
1 A C 2 0 V C R
I
123 4 65 7 8 9
18
SETTING UP YOUR TV
English
a
Press
MENU
and use
C
or
c
to select the
SETUP
menu. Press
b
to highlight
ATV Manual Tuning
and
press
OK
to select.
b
Use
B
or
b
to highlight the desired position. We
suggest
Pos. 0
for a media recorder.
c
Press
OK
to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
d
Press
c
to select
System
and use
B
or
b
to change if
required.
e
Then press
c
to select
Search
.
f
Press
B
or
b
to begin the search. The search symbol
will flash.
g
Each signal will show on the television. If it is not your
media recorder, press
B
or
b
again to restart the
search.
h
When your media recorder signal is found, press
c
to
move along to
Station
. Use
B
,
b
,
C
and
c
to put in
the required characters,
e.g.
VCR
.
i
Press
OK
to save.
j
Repeat for each
position
you want to tune, or press
RETURN
to return to the list of channels and select the
next number to tune.
k
Press
EXIT
when you have finished.
Different
Channel
numbers may be displayed.
SETUP
Menu Language English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
UK
Antenna
Quick Setup
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
5
C25
C28
C30
ATV Manual Tuning
System
1 A C 2 0
I
ATV Manual Tuning
Search
1 C 2 0 IA
PLEASE NOTE
This television has direct channel entry if the channel
numbers are known.
Select the
ATV Manual Tuning
screen in
Step 3
.
Enter the
Position number
, the
System
, then
C
for
standard (terrestrial) channels or
S
for cable
channels and the
Channel
number. Press
OK
to
save.
ATV Manual Tuning
Station
1 A C 2 0 V C R I
19
SETTING UP YOUR TV
English
To prevent certain channels from being viewed, positions can be
skipped.
a
Select
ATV Manual Tuning
from the
SETUP
menu.
b
Use
B
or
b
to highlight the position to be skipped and
press
OK
to select.
c
Press
c
to select
Skip
.
d
Use
B
or
b
to turn
Skip
on.
Press
OK
.
8
on the screen indicates a skipped position.
e
Press
RETURN
and repeat from
Step 2
or press
EXIT
.
Each position has to be
individually
selected. To turn
Skip
off, repeat the procedure for each position.
Skipped positions
cannot
be selected by
P
U
and
P
u
or by the controls on the television but
can
still be
accessed by the number buttons on the remote
control.
Channels may be moved and saved to the position of your
choice.
a
Select
ATV Manual Tuning
from the
SETUP
menu.
b
With the list of channels showing, use
B
or
b
to
highlight the channel you want to move and press
c
.
c
Use
B
or
b
to move through the list to your preferred
position. As you do so, the other channels will move to
make room.
d
Press
C
to save your move.
Repeat as necessary, and then press
EXIT
.
Skip
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40 ABC1
ABC1C22
5
C25
C28
C30
ATV Manual Tuning
Skip: On
1 A C 2 0 I
Sorting positions
Pos. Channel Station
ATV Manual Tuning
2
3
4
5
6
7
8
S10
C7
C40
C22
1
C2
C25
C28
C30
ABC1
ABC1
20
SETTING UP YOUR TV
English
DTV Manual Tuning
NOTE:
This feature varies depending on the
Ant/Cable In
setting.
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel
is known.
a
Select
DTV Manual Tuning
from the
SETUP
menu
and press
OK
.
b
Enter the multiplex number using the number buttons
or use
C
or
c
to adjust the number up or down.
c
Highlight
Start Scan
, and then press
OK
. The
television will automatically search for that multiplex.
When the multiplex is found, any channels that are not
currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d
Repeat as necessary. Press
EXIT
to finish.
When
Ant/Cable In
is set to
Cable, DTV Manual Tuning
items are as follows:
Frequency
– input a specific frequency to be scanned
Modulation
– choose from one of five QAM modulation
options
Symbol Rate
– input a specific baud rate (KS/s) to be used for
the manual scan
DTV Settings
The channel order may be changed to suit your personal
preference.
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Select
Channels
and press
OK
.
c
For your convenience, you can jump to specific places
in the list by one of two methods.
Line Number Jump
—Use the
number buttons
(0-9) to input the line number you want to select, and
then press
OK
.
Station Letter Jump
—Press
CC
or
cc
to jump
to the next station name with a different initial letter.
It is also possible to change the Position number of a
particular channel.
Renumber
Press the
RED
button to renumber the
highlighted channel. Edit the channel number using
the
number buttons
and press
OK
.
Manual Tuning
Manual Tuning for DVB-C
DTV Manual Tuning
WEAK
Signal Strength
Quality
Channel
GOOD
Start Scan
STRONGAVERAGE
13
Pos.New TypeName
ABC ONE
0 New Channels - Total 6
ABC TWO
ABC THREE
ABC NEWS 24
DTV Manual Tuning
2
1
7
40
ABCi
51
Channels
DTV Settings
Channels
PIN Setting
Subtitle and Audio
Parental Control
Local Time Setting
DVB Character Set
Dynamic Scan
Standby Channel Update
Standard
Off
On
Channels
Line No. 1/10
TV
1 ABC ONE
2 ABC TWO
Pos. Name
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
ABC ONE
Pos.
----
Name
21
SETTING UP YOUR TV
English
Move
—Press the
GREEN
button to activate the
Move
feature. Use the
B
or
b
buttons to select the
channel you wish to move and press
OK
to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat as
necessary.
Once all desired channels have been checked, use the
B
or
b
buttons to place the focus at the position to
which you wish to move the channels. The channels
will be inserted above the highlighted channel. Press
the
GREEN
button to execute the move.
Sort
—Press the
YELLOW
button. A confirmation
window will appear. Press
C
or
c
to select
Yes
and
press
OK
.
The
Sorting Type
selection window will appear.
Press
C
or
c
to set the sorting type.
A - Z
Station name order (A to Z)
Channel Number
Position No. order (numerical
sequence)
Press
b
to highlight
Sort
and press
OK
.
If the
Standby Channel Update
is set to
On
, when the TV is in
standby mode, Digital Tuning is automatically executed and any
new channels are saved.
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Press
b
to select
Standby Channel Update
and use
C
or
c
to select
On
.
This feature allows you to manually select the character set
(
Standard
= Table 0,
West
= Table 5 or
Latin alphabet 9
)
to be used for DVB-C or DVB-T channels.
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Press
b
to select
DVB Character Set
and use
C
or
c
to select
Standard
,
West
or
Latin alphabet 9
.
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
Broadcast information has changed. Would you like to
rescan now?
”. Please follow the message. If you do not wish
for the TV to detect changes and prompt you to rescan, you
should set this feature to "
Off
".
a
Select
DTV Settings
from the
SETUP
menu and press
OK
.
b
Press
b
to select
Dynamic Scan
and use
C
or
c
to
select
On
.
You can select either
Home
or
Store
mode.
Home
is
recommended for normal home use. Select
Store
when using
the television for displaying in a shop, etc.
a
Select
Location
from the
SETUP
menu.
b
Press
C
or
c
to select
Home
or
Store
.
This is a
digital
television which is integrated to allow the use
of both
digital
and
analogue
services. However, during the
lifetime of this set it is very likely that
analogue
services will
be switched off to allow for more new
digital
services.
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new
digital
services can be viewed without
disruption.
Standby Channel Update
Channels
Line No. 1/10
TV
1 ABC ONE
Pos. Name
822 AA
823 AC
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
Sort
Your existing channel order will be lost. Do you wish to
continue?
Yes
Sorting Type A - Z
Sort
Sort
DVB Character Set
Dynamic Scan
Location setting
Analogue
switch-off
22
English
CONTROLS AND FEATURES
General controls
Quick Menu
helps you access some options quickly, such as
Picture Mode, Picture Size, More Information, Sleep
Timer
etc.
Press
QUICK
to display the
Quick Menu
and use
B
or
b
to
select the option.
NOTE: Quick Menu
items are different depending on the
current mode.
Quick menu item example
To select a position, use the numbered buttons on the remote
control.
Positions can also be selected using
P
U
and
P
u
.
To display on-screen information such as position, input mode
or stereo/mono signal, press . Press again to cancel.
The time display facility allows the current (text service) time to
be seen on the television screen.
Press
D
whilst watching a normal television broadcast to
see the time display from the broadcaster. It will remain on
screen for about 5 seconds.
NOTE:
This display may not be available in some cases.
For ATV programmes
If stereo or dual language broadcasts are transmitted, the word
Stereo or Dual will appear on the screen each time positions are
changed, disappearing after a few seconds. If the broadcast is
not in stereo, the word Mono will appear.
Stereo…
Press
s
to select
Stereo
or
Mono
.
Bilingual…
Bilingual transmissions are rare. If they are
transmitted, the word
Dual
will be displayed. Choose the
required programme number, and if the word
Dual
appears,
press
s
to select
Dual 1
,
Dual 2
or
Mono
.
For DTV programmes
For stereo or dual mono broadcasts, press
s
and use
C
or
c
to select settings.
For multi-audio track broadcasts, press
s
repeatedly to
change the audio language (see ‘Audio language’ on
page 59).
Quick Menu
Mode Quick menu item Description
When viewing a TV
programme or
pictures from the
external input
Picture Mode See page 27.
Picture Size See page 25.
More Information See page 56.
Channel Options See page 58.
BBC iPlayer See page 41.
YouTube See page 41.
Media Player See page 44.
Photo Frame See page 51.
Sleep Timer See page 54.
Speakers See page 66.
Wireless Information See page 36.
When using EPG Genre Colour See page 57.
EPG Update/
Cancel EPG Update
See page 56.
Media Player (Multi
View, List View)
Sort Page 46 - 50
Interval Time Page 46 - 50
Repeat Page 46 - 50
Device Information Page 46 - 50
Wireless Information See page 36.
Photo Frame PICTURE See page 27.
Quick Menu
Picture Size
Picture Mode AutoView
Super Live
More Information
YouTube
BBC iPlayer
Channel Options
TV Speakers
00:00
Sleep Timer
Media Player
Speakers
Photo Frame
Wireless Information
Selecting positions
The Time Display –
analogue
only
Stereo and Bilingual transmissions
Mode Display Pressing
c
Stereo Stereo
S
Left
S
Right
Dual mono Dual 1
S
Dual 2
Mono
Multichannel
23
CONTROLS AND FEATURES
English
Sound controls
Volume
Press
y
or
Y
to adjust the volume.
Sound Mute
Press once to turn the sound off and again to cancel.
If a programme or film is being broadcast with a soundtrack in
more than one language, the
DUAL
feature allows selection
between them.
a
Press
MENU
and
C
or
c
to select the
SOUND
menu.
b
Press
b
to highlight
Dual
, and then press
C
or
c
to
choose between
Dual 1
or
Dual 2
.
The sound controls are accessible in
digital
and
analogue
modes.
a
Select the
SOUND
menu.
b
Press
b
to highlight
Balance
, and then press
C
or
c
to emphasize left or right speaker balance.
You can customize current sound mode settings. Select the
appropriate mode in accordance with the installation location of
the TV (
Stand
or
Wall
) and adjust the equalizer on-screen as
desired.
a
Select the
SOUND
menu.
b
Press
b
to highlight
Advanced Sound Settings
, and
then press
OK
.
c
Press
b
to highlight
Sound Navi
, and then press
OK
.
d
Press
C
or
c
to select either
Stand
or
Wall
depending
on how your TV is installed, and then press the RED
button.
e
Press
C
or
c
to select the frequency range you want to
adjust from the equalizer window, and then press
B
or
b
to adjust the level.
f
Repeat step 5 for other frequencies.
Volume controls and mute sound
Dual
Balance
Dual
Balance
Advanced Sound Settings
Audio Level Offset
Audio Description
0
Dual 1
Dolby Volume Low
Dynamic Range Control Off
SOUND
Sound Navi
Surround Off
Voice Enhancement On
Sound Navi
Dynamic Bass Boost High
Advanced Sound Settings
TV Mounting Stand
Sound Navi
+20
0
-20
100 330 1K 3.3K 10K [Hz]
2 1 0 1 2 [Level]
Equalizer
24
CONTROLS AND FEATURES
English
Surround
,
Voice Enhancement
, and
Dynamic Bass Boost
help to create an enhanced surround sound experience with
deep, rich bass from stereo sound sources. Your TV’s audio will
sound fuller, richer, and wider.
a
In the
SOUND
menu, press
b
to highlight
Advanced
Sound Settings
, and then press
OK
.
b
Press
b
to highlight
Surround
, and then press
C
or
c
to select
Off
,
Spatial
or
Cinema
.
c
Press
b
to highlight
Voice Enhancement
, and then
press
C
or
c
to select
On
.
d
Press
b
to highlight
Dynamic Bass Boost
and using
C
or
c
select the desired bass expansion level (
Off,
Low
or
High
).
This feature provides a consistent sound volume regardless of
programmes, channels or input sources.
a
In the
SOUND
menu, press
b
to highlight
Dolby
Volume
.
b
Press
C
or
c
to select
Low
,
High
or
Off
.
NOTE:
•The
Dolby Volume
setting influences the
Dynamic Range
Control
and
Digital Audio Output
settings.
•If
Dynamic Range Control
is set to
On
, this feature will be
disabled.
This feature allows control of audio compression for some
digital TV programmes (MPEG-1 and MPEG-2 audio
programmes are not supported).
a
In the
SOUND
menu, press
b
to highlight
Dynamic
Range Control
.
b
Press
C
or
c
to select
On
or
Off
.
NOTE:
This feature is disabled when
Dolby Volume
is set to
Low
or
High
.
Sometimes there can be large changes in volume when
switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or
an external input. Using the
Audio Level Offset
feature
reduces these volume differences.
a
Set the volume level usually used when watching a
DTV 5.1ch programme.
b
Tune to a channel which is DTV 2ch, ATV or an external
input.
c
In the
SOUND
menu, press
b
to highlight
Audio
Level Offset
and press
OK
.
d
Press
b
to highlight an option, and then use
C
or
c
to adjust the volume level.
NOTE:
The available item changes depending on the current input
source. For example, while watching a DTV 2ch programme,
only
DTV 2ch
is available and the other two items are
greyed out in the menu. This allows you to easily adjust
according to each condition.
When watching a DTV 5.1ch programme, this feature is not
available.
Audio Description is an additional narrative sound track for
visually impaired individuals to understand and enjoy the story
line more fully. The letters AD will be displayed in the channel
banner when programmes contain AD content.
a
In the
SOUND
menu, select
Audio Description
and
press
OK
.
b
Highlight
Audio Description
, and then press
C
or
c
to select
On
.
The
AD
button on the Remote can also be used to
toggle the
Audio Description
feature between On
and Off.
c
To adjust the level of the audio description sound to
the main sound, highlight
Mixing Level
and use
C
or
c
.
Surround Settings
Dolby Volume
®
Dynamic Range Control
Surround Off
Voice Enhancement On
Sound Navi
Dynamic Bass Boost High
Advanced Sound Settings
Audio Level Offset
Audio Description
0
0
-5
Audio Level Offset
ATV
DTV 2ch
External Input
50
Audio Description
Mixing Level
Audio Description
On
Loading...
+ 54 hidden pages