Toshiba 40VL748, 40XL748, 46VL748, 46XL748 User Manual

VL74* Digital

Series

XL74* Digital

Series

EUROPEAN UNION ECOLABEL

Awarded to goods or services which meet the environmental requirements of the EU ecolabelling scheme

English

Contents
INSTALLING YOUR TV
Safety Precautions ...........................................	4
Installation and important information ..............	5
The remote control ..........................................	7
Inserting batteries and effective range ........	7
CONNECTING YOUR TV
Connecting external equipment ........................	8
Bundling the cables .........................................	9
Connecting an HDMI® or DVI device to the HDMI
input ..........................................................	10
To connect an HDMI device ......................	10
To connect a DVI device ...........................	10
HDMI’s ARC (Audio Return Channel)
feature .................................................	10
REGZA-LINK connection .................................	11
Connecting a computer ..................................	12
To connect a PC to the RGB/PC terminal ...	12
To connect a PC to the HDMI terminal ......	12
Connecting a home network ...........................	13
To connect the TV to a home network -
Wired ...................................................	13
To connect the TV to a home network with an
internet connection - Wireless ................	13
Controls and input connections ......................	14
Switching on ...........................................	14
Using the remote control ..........................	14
Using the controls and connections ...........	14
SETTING UP YOUR TV
Startup Application ........................................	15
Quick Setup ............................................	15
Ant/Cable/Satellite (if available) ...............	17
Satellite Settings ......................................	17
Auto Tuning ............................................	19
ATV Manual Tuning .......................................	20
Tuning ....................................................	20
Skip ........................................................	21
Sorting positions ......................................	22
DTV Manual Tuning .......................................	22
Manual Tuning ........................................	22
Manual Tuning for DVB-C ........................	23
Manual Tuning for DVB-S .........................	23
DTV Settings ..................................................	23
Channels (Antenna/Cable) .......................	23
Channels (Satellite) .................................	24
Standby Channel Update .........................	25
DVB Character Set ...................................	25
Dynamic Scan .........................................	25
Location setting .......................................	25

Analogue switch-off ...............................	25
CONTROLS AND FEATURES
General controls ............................................	26
Quick Menu ............................................	26
Selecting positions ...................................	26
The Time Display – analogue only ...........	26
Stereo and Bilingual transmissions ............	26
Sound controls ..............................................	27
Volume controls and sound mute ..............	27
Dual .......................................................	27
Balance ..................................................	27
Sound Navi .............................................	27
Surround Settings ....................................	27
Dolby Volume® .......................................	28
Dynamic Range Control ...........................	28
Audio Level Offset ...................................	28
Audio Description ....................................	28
Widescreen viewing .......................................	29
Picture controls ..............................................	31
Picture Mode ...........................................	31
Picture preferences ..................................	31
Reset ......................................................	31
Colour Master .........................................	31
Base Colour Adjustment ...........................	32
Colour Temperature ................................	32
Auto Brightness Sensor Settings ................	32
Active Backlight Control ...........................	33
Black/White Level ....................................	33
Static Gamma .........................................	33
MPEG NR – Noise Reduction .....................	33
DNR – Digital Noise Reduction .................	33
Resolution+ ............................................	33
Active Vision M100 ..................................	33
Film Stabilization .....................................	34
Resetting the advanced picture settings .....	34
Expert Picture Settings ..............................	34
Control Visualization ...............................	35
Automatic Format (Widescreen) ................	35
4:3 Stretch ..............................................	35
Blue Screen .............................................	35
Picture Position ........................................	36
Picture still ..............................................	36
HDMI Information Display ........................	36
Using your home network ..............................	37
Setting up the Network ..................................	38
Wireless Setup ........................................	38
Advanced Network Setup .........................	40
DNS Setup ..............................................	41
Network Connection Test .........................	42
Using the software keyboard ..........................	42

2

Setting up the Media Renderer feature ............	43
Installation ..............................................	43
Media Renderer .......................................	43
Device Name Setup .................................	43
Web Password Setup ................................	44
Media Controller Setup ............................	44
Maximum Volume Setup ..........................	44
Using YouTube™ ...........................................	45
Using the Function Menu .........................	45
Using the Media Player ..................................	47
Basic operation .......................................	48
Viewing photo files ..................................	49
Viewing movie files (on a DLNA CERTIFIED™
Server or USB device) ............................	51
Playing music files (on a DLNA CERTIFIED™
Server or USB device) ............................	53
Using the Photo Frame feature .......................	54
To open Photo Frame ...............................	54
Setting the features .................................	55
Other features ...............................................	56
Panel Lock ..............................................	56
The timers .....................................................	57
Programme Timers – digital only .............	57
On Timer ................................................	57
Sleep Timer .............................................	58
Energy Saving Settings ...................................	58
Automatic Power Down ............................	58
No Signal Power Down ............................	58
Digital on-screen information and Programme
Guide .........................................................	59
Information .............................................	59
Guide .....................................................	60
Genre selection/searching .......................	60
Digital settings – parental control ...................	61
Setting the PIN ........................................	61
Parental Setup .........................................	61
Network Lock ..........................................	61
Digital settings – Channel Options ..................	62
Selecting favourite channels .....................	62
Favourite Channel Lists ............................	62
Skip channels ..........................................	62
Locking channels .....................................	62
Digital settings – other settings .......................	63
Subtitles ..................................................	63
Audio languages .....................................	63
Common Interface ...................................	63
Software Upgrade and Licences ......................	64
Auto Upgrade .........................................	64
Searching for New Software .....................	64
Network Upgrade ....................................	64
Software Licences ....................................	64

System Information and Reset TV ....................	65
System Information ..................................	65
Reset TV ..................................................	65
PC Settings ...................................................	65
Horizontal and Vertical Position ................	65
Clock Phase ............................................	65
Sampling Clock .......................................	66
Reset ......................................................	66
Input selection and AV connections .................	66
Input selection ........................................	66
External input skip ...................................	67
Labeling video input sources ....................	67
Colour Decoding .....................................	67
PC Audio ................................................	68
HDMI 2 Audio .........................................	68
Side Shared Audio ...................................	68
HDMI Settings .........................................	68
Digital Audio Output ...............................	69
Using REGZA-LINK ........................................	70
Enable REGZA-LINK .................................	70
TV Auto Power .........................................	70
Auto Standby ..........................................	70
Amplifier Control .....................................	70
Speaker Preference ..................................	70
REGZA-LINK input source selection ...........	70
REGZA-LINK playback device control ........	71
REGZA-LINK one touch play .....................	71
REGZA-LINK system standby .....................	71
REGZA-LINK system audio control .............	71
Toshiba PC compatible with REGZA-LINK .......	71
TEXT SERVICES
Text services ..................................................	72
Selecting modes ......................................	72
Text information ......................................	72
Navigating pages using Auto ...................	72
Navigating pages using LIST ....................	72
Control buttons .......................................	73
PROBLEM SOLVING
Questions and Answers ..............................	74
INFORMATION
License Information .......................................	77
Information ...................................................	79
Specifications and accessories ........................	82

English

3

English

INSTALLING YOUR TV

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.

Air Circulation

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.

THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.

Do not

DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.

Heat Damage

Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C (41°F) min. and 35°C (94°F) max.

Mains Supply

The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. Use only the supplied lead.

DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance.

IF IN DOUBT, PLEASE CONSULT A COMPETENT ELECTRICIAN.

Do

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.

WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all times.

DO NOT use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety, always fit the manufacturer’s approved stand, bracket or legs with the fixings provided according to the instructions.

DO NOT leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, and make sure your family knows how to do this. Special arrangements may need to be made for people with disabilities.

DO NOT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.

ABOVE ALL – NEVER let anyone, especially children, push or hit the screen and cabinet back, or push anything into holes, slots or any other openings in the case. These actions will damage screen or internal parts.

NEVER connect the supplied COMPONENT Adaptor cable or AV Adaptor cable to a wall outlet. These cables are ONLY for insertion into the socket provided for the purpose on the rear/ side of the TV.

NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.

4

INSTALLING YOUR TV

Installation and important information

Where to install

Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.

Place the TV on a stable, level surface that can support the weight of the TV. In order to prevent Injury and maintain stability of this apparatus, secure the TV to the level surface using the strap if fitted, or to a wall using a sturdy tie to the P clips provided.

The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.

Fixing strap	Sturdy tie (as short as possible)
	Stand clip
‘P’ Clip

Fixing strap

Stand style is dependent on model

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.

Cleaning the screen and cabinet…

Turn off the power, and clean the screen and cabinet with a soft, dry cloth. The enclosed cleaning cloth is for cabinet cleaning. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.

When using a Wall Bracket

Please use a wall bracket appropriate for the size and weight of the LCD TV.

•Two people are required for installation.

•Never use the four screws attached to the TV.

•To install a wall-mount from another manufacturer, use the SPACERS (supplied).

1Unplug and remove any cables and/or other component connectors from the rear of the TV.

2Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.

3Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

4Make sure to place the spacers supplied between the bracket and the back of the TV.

5Always use the screws supplied or recommended by the wall mount manufacturer.

Screw

Wall bracket

Spacer

(supplied)

TV back panel

Remove four screws.

(Do not reuse these screws for attaching a wall bracket.)

Place four spacers (supplied).

Removing the Pedestal Stand:

1Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.

NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

2Remove the five screws.

Five screws

3Once you have removed all five screws holding the pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV.

English

5

English

INSTALLING YOUR TV

Please take note

The digital reception function of this television is only effective in the countries listed in the “Country” section of the “SETUP” menu. Depending on country/area, some of this television’s functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of other size modes (eg: Super Live) will prevent permanent retention.

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:

i)fire;

ii)earthquake;

iii)accidental damage;

iv)intentional misuse of the product;

v)use of the product in improper conditions;

vi)loss and/or damage caused to the product whilst in the possession of a third party;

vii)any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual;

viii)any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.

NOTE: A Toshiba wall bracket or stand, where available, must be used.

6

INSTALLING YOUR TV

The remote control

Simple at-a-glance reference for your remote control.

	2	1
		4
	3
		5
	6	8

7

9

10	11
	13
12	16
15	14
17	18
19	20
21	22
25	23
24	26
	27
	28

1For On/Standby mode

2To select external input sources

3Selectable Picture preferences

4Widescreen viewing

5sStereo/bilingual transmissions

6To select TV Mode

7To access the analogue or digital Channel List

8To access More Information Menu

9Number buttons

10Switch the Audio Description On/Off

11To return to previous programme position

12To alter the TV volume

13To display on-screen information

To access the index page in Text mode

14To mute the TV sound

15To access Quick Menu

16To change programme positions To change TEXT pages

17To display the digital on-screen Programme Guide

18To exit menus

19 To page up, down, left or right

20When using menus, the arrows move the cursor on the screen up, down, left or right. Press OK to confirm your selection

21On-screen Menus

22To return to previous Menu

23Colour buttons: Text and interactive service control buttons

24To call up text services

25To access Media Player Menu

26Digital Subtitles or Analogue TEXT Subtitle pages if available

27 When in TV mode:		When in Text mode:
r	Picture still	A	To reveal concealed
DAnalogue time		B	text
	display		To hold a wanted
		C	page
			To enlarge text
			display size
		DTo select a page
			whilst viewing a
			normal picture
When using Programme		During Playback:
Guide:		c	To PLAY
Z - 24 hours		v	To STOP
z + 24 hours		W/w To PAUSE/STEP
CC - 1 page		Z	To SKIP-BACK
cc + 1 page		CC	To REWIND
		cc	To FAST FORWARD
		z To SKIP-FORWARD
28 When using REGZA-LINK:
1	To turn On/Standby
AUDIO	To access AUDIO Menu
SET UP	To access SET UP Menu
V	To EJECT
ROOT	To access ROOT Menu
CONTENTS To access CONTENTS Menu
TOP	To access TOP Menu
DVD	To access DVD Menu

Inserting batteries and effective range

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AAA, IEC R03 1.5V.

Do not combine a used, old battery with a new one or mix

battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 78 of this manual. Warning: batteries must not be exposed to excessive heat such as sunshine, fire or the like.

The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing.

English

7

English

CONNECTING YOUR TV

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.

LAN port COMPONENT VIDEO INPUT*

VIDEO INPUT** OPTICAL DIGITAL AUDIO OUTPUT PC/HDMI2 AUDIO (shared)

HDMI® INPUT SOCKETS

POWER switch

POWER cord

FIXING STRAP

	SCART Adaptor cable
	(supplied)
Aerial/Cable	Satellite dish

media recorder

Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the aerial to the socket on the rear of the television. If you use a decoder and/or a media recorder, it is essential that the aerial cable is connected through the decoder and/or

through the media recorder to the television.

“F-type”

HDMI® (High-Definition Multimedia Interface) is for use with a DVD decoder or electrical equipment with digital audio and video output.

For acceptable video or PC signal formats through the HDMI terminals, see page 80.

Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . .

Connect the LNB from the satellite dish to the SATELLITE ANTENNA socket on the TV. You can receive TV, radio, interactive TV, and HD TV with clear reception.

SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the media recorder IN/OUT socket to the television. Connect the decoder TV socket to the television.

Use the SCART Adaptor cable (supplied).

Before running Auto Tuning, put your decoder and media recorder to Standby.

*COMPONENT VIDEO INPUT connection: Use the COMPONENT Adaptor cable (supplied).

The AUDIO terminals are shared with the VIDEO INPUT.

**VIDEO INPUT connection:

Use the A/V Adaptor cable (supplied).

The AUDIO terminals are shared with the COMPONENT INPUT.

The Digital Audio Output socket enables the connection of a suitable surround sound system. NOTE: this output is always active.

NOTE: Although this television is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly.

LAN port is used to connect the TV to your home network. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function.

A wide variety of external equipment can be connected to the back of the television; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press o to select between DTV, EXT 1, EXT 2, EXT 3,

HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.

When the external input mode is selected while viewing DTV mode, the SCART socket does not output video/audio signals.

8

Bundling the cables

Install the cable clamps, and put the cables in these.

Stand type

CONNECTING YOUR TV

English

Cable Clamps

Wall Mount type

Cable Clamps

9

English

CONNECTING YOUR TV

Connecting an HDMI® or DVI device to the HDMI input

The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.

To connect a DVI device

Connect an HDMI-to-DVI adaptor cable (HDMI type A connector) to the HDMI 2 terminal and audio cables to the PC/ HDMI 2 (AUDIO) socket (see illustration).

•The recommended HDMI-to-DVI adaptor cable length is 6.6 ft (2m).

•An HDMI-to-DVI adaptor cable transfers video only. Separate analogue audio cables are required.

This input is designed to accept HDCP (High-Bandwidth	• See “HDMI 2 Audio” on page 68.
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant [1] consumer electronic
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 80.

NOTE:

• Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of a new standard. Please unplug your HDMI cable first and then try setting the

INSTAPORT™ and Enable Content Type options to “Off”. Your early HDMI source should operate properly with your television. See page 68.

•Supported Audio format: Linear PCM, Dolby Digital (AC-3), sampling rate 32/44.1/48kHz.

			Audio cable for HDMI to
	To connect an HDMI device		television connection
			(not supplied)
	Connect an HDMI cable (type A connector) to the HDMI terminal.		HDMI-to- DVI
	For proper operation, it is recommended that you use an HDMI		adaptor Cable
			DVI device
	cable with the HDMI Logo (	).
	• If your HDMI connection is capable of 1080p and/or your
	television is capable of refresh rates greater than 50Hz, you
	will need a Category 2 cable. Conventional HDMI/DVI cable
	may not work properly with this model.
	• HDMI cable transfers both video and audio. Separate		NOTE:
	analogue audio cables are not required (see illustration).		To ensure that the HDMI or DVI device is reset properly, it is
	• See “HDMI 2 Audio” on page 68.		recommended that you follow these procedures:
			• When turning on your electronic components, turn on the
	the back of your television		television first, and then the HDMI or DVI device.
			• When turning off your electronic components, turn off the
			HDMI or DVI device first, and then the television.
			HDMI’s ARC (Audio Return Channel) feature
			This feature enables the audio signal of the TV to be sent to the
			AV amplifier via the HDMI cable. It will not be necessary to
			connect a cable from the audio output of the TV to the audio
			input of the AV amplifier to reproduce the audio received from
			the tuner of the TV through the AV amplifier.
	HDMI cable		AV amplifier that supports ARC
	HDMI device

To view the HDMI device video, press the o button to select

HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.	HDMI cable

10

CONNECTING YOUR TV

REGZA-LINK connection

You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 70–71.

the back of your television

Playback device

AV amplifier

Playback device

For the setup shown above, you will need three HDMI cables.

Before controlling the device(s):

NOTE:

• After completing the above connections, set the REGZA-LINK

Setup menu as you desire (see page 70).

• If several devices are connected, the REGZA-LINK feature

• The connected devices must also be set. For details, see the

may not operate properly.

• For proper operation, it is recommended that you use HDMI

operation manual for each device.

• The REGZA-LINK feature uses CEC technology as regulated

cables with the HDMI Logo (

).

• This function is available when one PC and one AV amplifier

by the HDMI standard.

• This feature is limited to models incorporating Toshiba’s

are connected separately. However, it may not operate

properly if the PC is connected via the AV amplifier.

REGZA-LINK. However, Toshiba is not liable for those

operations. Refer to individual instruction manuals for

compatibility information.

English

11

English

CONNECTING YOUR TV

Connecting a computer

• A band may appear at the edges of the screen or parts of the

picture may be obscured. This is due to scaling of the picture

With either an RGB/PC or an HDMI connection, you

by the set, it is not a malfunction.

• When PC input mode is selected, some of the television’s

can watch your computer’s display on the television

features will be unavailable e.g. Colour System in the

and hear the sound from the television’s speakers.

SETUP menu.

• Some PC models may output unique signals that the

television may be unable to detect (see page 79) .

To connect a PC to the RGB/PC terminal

When connecting a PC to the RGB/PC terminal on the

To connect a PC to the HDMI terminal

television, use an analogue RGB (15-pin) computer cable and

a PC audio cable for the PC/HDMI 2 (AUDIO) socket. Select PC

When connecting a PC to the HDMI terminal on the television,

from the PC/HDMI 2 Audio options in the AV Connection

use an HDMI-to-DVI adaptor cable and an analogue audio

menu located in the PREFERENCES menu.

cable.

the back of your television

If connecting a PC with an HDMI terminal, use an HDMI cable

(type A connector). A separate analogue cable is not

necessary.

the back of your television

Mini D-sub 15 pin connector

Computer

Audio cable for PC to television connection

(not supplied)

RGB PC cable

(not supplied)

Conversion adaptor if required (not supplied)

To use a PC, set the monitor output resolution on the PC before connecting it to the television. For acceptable PC signal formats, see page 79.

To display the optimum picture, use the PC setting feature (see page 65).

NOTE:

•The PC audio input terminal on the television is shared with the HDMI 2 analogue audio input terminal (see page 68).

•Some PC models cannot be connected to this television.

•An adaptor is not needed for computers with a compatible mini D-sub15-pin terminal.

•Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multiangle scenes.

Computer

Audio cable for PC to television connection

(not supplied) HDMI-to-DVI adaptor cable

For acceptable PC and video signal formats, see page 80.

NOTE:

•The edges of the images may be hidden.

•If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.

12

CONNECTING YOUR TV

Connecting a home network

The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV.

NOTE:

•If you connect to a shared network outside your home, it is advisable to use a router. Always use DLNA CERTIFIED™ products in private network environments.

•If you use a hub or switch to connect the TV to your home network, you may not be able to use the automatic setup and will have to manually set up the network address. See page 41.

•If you use a router with built-in DHCP functionality, use the automatic setup. Manual setup may not work.

•If you connect the TV and PC directly, use a crossover LAN cable.

To connect the TV to a home network - Wired

the back of your television

To connect the TV to a home network with an internet connection - Wireless

Please refer to “Wireless Setup” section on page 38.

the back of your television

TOSHIBA Dual

Band WLAN adaptor

Access point (AP)

Wireless LAN router

Modem

PC

English

Modem (if available)
				Router with hub

[1] [2]

[2][3]

Cable or Phone jack

Server PC

[2]

[1]Coaxial or telephone cable (depending on your modem type)

[2]Standard LAN cable

[3]Do NOT connect a phone jack directly to the TV’s LAN port.

13

English

CONNECTING YOUR TV

Controls and input connections

A wide variety of external equipment can be connected to the input sockets on the side of the television.

Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.

POWER switch

(Full Power Down Option)

GREEN LED – On Timer set

Ambient Light Sensor

ORANGE LED - Programme timer set (digital only)

RED LED – Programme timer Active (digital only)

USB 1 Media Player

USB 2 Wireless LAN adaptor ready for a home network

COMMON INTERFACE

The Common Interface is for a Conditional Access Module (CAM).

Contact a service provider.

The software updating of CI Plus CAM may be automatically executed. At this time, your Recording/Reminder programming will be canceled.

Control panel (touch sensor)

RED LED – Standby

BLUE LED – Power on

Switching on

If the RED LED is not lit, check that the mains plug is connected to the power supply and push the ! (POWER) button on the left side of the television to switch the television on. If the picture does not appear, press 1on the remote control; it may take a few moments. The BLUE LED will be lit.

To put the television into Standby, press 1 on the remote control. To view the television, press 1 again. The picture may take a few seconds to appear.

For energy saving:

We recommend that you use the television with the factory settings. The factory settings are for energy saving.

Turning the television off at its mains supply, or un-plugging it, will cut energy use to nearly zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday.

Reducing the brightness of the screen will reduce energy use. Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills.

NOTE: Putting the television into standby mode will reduce energy consumption, but will still draw some power.

Using the remote control

Press MENU on the remote control to display the menu.

The menu appears as a list of five topics. As each symbol is selected by pressing C or c on the remote control, its respective options will appear below.

NOTE: The same menu is displayed in DTV (Digital TV) and ATV (Analogue TV) modes; however, where some items are not available in a mode, they will appear greyed out.

To use the option, press B and b on the remote control to move up and down and press C or c to select your desired setting. Follow the on-screen instructions. The functions of each menu are described in detail throughout the manual.

Using the controls and connections

To alter the volume gently touch – 2 +.

To alter the programme position touch b p B.

Touch MENU and – 2 + or b p B to control the sound and picture options.

Touch MENU to finish.

The Media Player feature provides access to photo, movie and music files stored on a USB storage device that is connected via USB 1 (USB 2 provides access to photos only).

NOTE: The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment.

The USB 2 socket has to be used with the “TOSHIBA Dual Band WLAN Adaptor WLM-10U2” in order to access a wireless network.

You must use the TOSHIBA Wireless LAN device to ensure correct operation of this feature. This feature is available only when the “TOSHIBA Dual Band WLAN Adaptor“ is used.

To select an external input, press ountil the appropriate input source is selected.

Please always refer to the owner’s manual of the equipment to be connected for full details.

14

	SETTING UP YOUR TV
Startup Application	g Press OK, and the TV Mounting screen will appear,
	press C or c to select Stand or Wall.

Before switching on the television, put your decoder and media recorder, if applicable, to Standby. To set up the television, use the buttons on the remote control as detailed on page 7.

Quick Setup

a Press the 1 button. The Menu Language screen will appear. This screen will appear the first time that the television is switched on and each time Reset TV is selected.

b Press B, b, C, or cto select the menu language, and then press OK.

c Highlight Country and C or c to select. The television is now set to tune the stations for your country.

Quick Setup
	Country		Germany
	Primary Subtitle Language		English
	Secondary Subtitle Language		English
	Primary Audio Language		English
	Secondary Audio Language		English

TV Mounting

If you are mounting the TV on a wall please select [Wall]. [Stand] is recommended for other uses.

This setting may be modified later under Sound Navi in the SOUND menu.

Stand

h Press OK, and the AutoView screen will appear, press C or c to select Yes or No.

AutoView

AutoView mode automatically adjusts picture settings to suit ambient light conditions.

Do you wish to enable AutoView mode?

No

i Press OK. If the Ant/Cable/Satellite screen appears, press B or b to select Antenna, Cable or Satellite, and then press OK to check ().

Ant / Cable / Satellite

Antenna

Cable

Satellite

Next

NOTE:

•The following display menus will differ slightly according to the country you selected.

•If there is not a country that you want to select in the list, select Others.

d Press OK, and the Location screen will appear.

Location

To use the TV for displaying in a store showroom, please select [Store]. [Home] mode is recommended for normal use.

Home

e Press C or c to select Home or Store. For normal home use, select Home.

f Press OK. If Store is selected in step 5, a Store mode confirmation window will appear. If you select Yes from that window, the TV will proceed to the Auto Demo setup screen.

If DVB-C is not supported in your area, Cable will not be displayed.

•When you select Antenna or Cable, follow steps 10 to 13.

•When you select Satellite, skip to step 14.

•When you select Antenna (or Cable) and Satellite, the Satellite Settings startup screen will appear automatically after completing the Antenna (or Cable) scan and pressing OK.

j Select Next and press OK. The Auto Tuning startup screen will appear with the option to select between DTV and ATV, DTV or ATV if available. Use C or c to select the appropriate mode.

k Press Bor bto highlight Start Scan, and then press OK.

The television will start to search for available DTV and/or ATV channels. The progress bar will indicate the scan status.

English

15

English

SETTING UP YOUR TV

You must allow the television to complete the search.

Auto Tuning
	Progress				Found
DTV Tune	3%				2
ATV Tune				Waiting...
				Channel: C7

When the search is complete, the television will automatically select position one.

The Auto Tuning screen will display the total number of services found.

l Press Cor c to view the DTV (digital channel) or ATV (analogue channel) lists.

m Use B or b to move through the list to select a channel, and then press OK to view.

In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning.

REMEMBER: Press TV at any time to select between ATV and DTV (DTV Ant TV/RADIO/TEXT, DTV Cable TV/RADIO/TEXT, DTV Sat TV/RADIO/TEXT if available) modes.

NOTE: The time will be set automatically by transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen.

Select Next and press OK. The Satellite Settings screen will appear. From this window, you can add the satellites that you wish to tune and configure detailed settings for each one individually. See “Satellite Settings” section on page 17.

Satellite Settings

Switch Type						None
LNB Power						On
No.			Satellite		Dish			LNB
1			ASTRA 19.2˚E		1			1
2
3
4

Transponder : 1/83 (10743 MHz)

Dish Type : Fixed

Lower LOF (MHz) : 9600

Upper LOF (MHz) : 10600

Done

Highlight Done and press OK.

If your satellite dish is movable, the following Positioning screen will appear.

Positioning

Satellite : ASTRA 19.2°E

Transponder		1/83 (10743 MHz H)
Go to 0
Go to Stored Position
Step Size		1
Positioning	W	E

Store Position

Signal Level

Press Bor bto highlight Positioning, and then press C or c to find the dish position with the strongest signal level.

Press B or b to highlight Store Position and press OK to store the dish position. Repeat steps 14 and 15 for the next satellite as needed.

If your satellite dish is not movable, the Positioning screen will not appear.

Adjust the dish position manually for maximum Signal Level strength.

Highlight Done and press OK.

If the reception testing completes successfully, the Auto Tuning startup screen will display.

Auto Tuning - Satellite

	Start Scan
Satellite		ASTRA(19.2°E)
Scan Option		Free to Air

You can select Scan Option from Free to Air and All.

Press B or b to highlight Start Scan, and then press

OK.

The television will start to search for available DVB-S channels. The progress bar will indicate the scan status.

When the search is complete, the Auto Tuning results screen will display the total number of services found.

Use B or b to move through the list to select a channel, and then press OK to view.

PLEASE NOTE

The Quick Setup menu can also be accessed at any time from the SETUP menu.

16

SETTING UP YOUR TV

Ant/Cable/Satellite (if available)

From this menu, you can set the RF input configuration.

a Press MENU, and select SETUP menu.

b Use bto highlight Ant/Cable/Satellite and use Cor c to select Antenna, Cable or Satellite.

NOTE: When you attempt to change the Ant/Cable/ Satellite setting, a warning message will appear followed by PIN entry (if PIN has been set) and a prompt for Auto Tuning.

DTV End Frequency:

This sets the frequency at which the scan will end.

DTV Modulation:

You can choose from five QAM modulation settings.

DTV Symbol Rate:

This is the baud rate (KS/s) of the scan.

DTV Network ID:

This is the Network ID to be utilized for the scan. This item is greyed out when DTV Scan Type is set to “Full Scan”.

c When Ant/Cable/Satellite is set to Cable, the
following setting options will be provided in the Auto	Satellite Settings
Tuning screen.	From the SETUP menu, you can add the satellites that you wish
Press Bor bto select an item, and then press Cor c	to tune and configure detailed settings for each one
to select your desired option.	individually.

Auto Tuning

Tuning Mode			DTV and ATV
		Start Scan
DTV
Scan Type			Quick Scan
Start Frequency			Auto
End Frequency			Auto
Modulation			Auto
Symbol Rate			Auto
Network ID			Auto

With the exception of DTV Scan Type and DTV Modulation items, all of the following items will have 2 operating modes. The first is Auto where the values for each item are preset by the system. The second is an Input mode where you will be able to enter a single value in place of the pre-set value. If no channel is currently tuned and the Input state is chosen, a system default value will be shown. However, if a channel is currently tuned when the item is accessed, the value of the current channel will be displayed.

DTV Scan Type:

This item determines whether a Quick Scan or a Full Scan will be executed.

The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time.

To add a satellite:

a Press MENU and use C or c to select SETUP menu.

b Use b to highlight Satellite Settings. Press OK.

Satellite Settings

Switch Type						None
LNB Power						On
No.			Satellite		Dish			LNB
1			ASTRA 19.2˚E		1			1
2
3
4

Transponder : 1/83 (10743 MHz)

Dish Type : Fixed

Lower LOF (MHz) : 9600

Upper LOF (MHz) : 10600

Done

c Press b to highlight a new line to add an another satellite, and press OK.

d Press buntil the required satellite is displayed and press

OK.

DTV Start Frequency:

This sets the frequency from which the scan will begin.

English

17

English

SETTING UP YOUR TV

To delete a satellite:

a In the Satellite Settings menu, press B or b to highlight the satellite you want to delete.

b Press the RED button. A confirmation window will appear.

c Press C or c to select Yes and press OK.

NOTE: It is not possible to delete position No.1.

To edit the satellite settings:

a In the Satellite Settings menu, press B to highlight

Switch Type.

b Press C or c to select None, ToneBurst, DiSEqC 2way or DiSEqC 4way as your satellite switch type.

c Press b to highlight LNB Power and press C or c to select On or Off.

To add a transponder:

a In the Satellite Settings menu, press B or b to highlight the line you want to edit and press OK.

	1	ASTRA 19.2˚E	1	1

b Press the GREEN button. The Transponder Settings screen will appear.

Transponder Settings
		Frequency	Polarisation	Symbol Rate	S/S2
	1	10743	H	22000	S
2		10773	H	22000	S
3		10788	V	22000	S
4		10817	V	22000	S
5		10832	H	22000	S
6		10847	V	22000	S
	7	10861	H	22000	S
	8	10876	V	22000	S

c Press B to highlight a new line.

Transponder Settings
		Frequency	Polarisation	Symbol Rate	S/S2
	76	12640	V	22000	S
	77	12662	H	22000	S
	78	12669	V	22000	S
	79	12692	H	22000	S
	80	12699	V	22000	S
	81	12721	H	22000	S
	82	12728	V	22000	S
	83

d Press OK.

	83	0	H	0	S

e Edit each parameter as required and press OK. See page 18.

	83	12731	H	22000	S2

To delete a transponder:

a In the Transponder Settings menu, press B or b to highlight the line you want to delete.

b Press the RED button.

To edit the Transponder Settings:

a In the Transponder Settings menu, press B or b to highlight the line you want to edit and press OK.

b Press C or c to select Frequency, Polarisation,

Symbol Rate or S/S2, and set the item using the number buttons if necessary.

c Press OK to save your settings.

d Repeat steps 1 through 3 for other lines.

e Press BLUE to finish editing and return to Satellite Settings.

Press GREEN to cancel any edits that were made this time.

Press YELLOW to reset all transponder settings to their initial default settings.

18

SETTING UP YOUR TV

To select the Dish Type:

a In the Satellite Settings menu, press B or b to highlight the required satellite line, and then press

OK.

b Press C or c to highlight Dish, and then press the GREEN button.

Dish Settings

Dish : 1

Dish Type

Fixed

c Press C or c to select Dish Type. You can select Movable or Fixed as the Dish Type.

To select the LNB Settings:

a In the Satellite Settings menu, press B or b to highlight the required satellite line, and then press

OK.

b Press C or c to highlight LNB, and then press the GREEN button.

LNB Settings
	LNB : 1
	Lower LOF	9750
	Upper LOF	10600

c Press B or bto select Lower LOF or Upper LOF and input the appropriate frequencies.

Auto Tuning

NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them.

Auto Tuning will completely re-tune the television and can be used to update the channel list. It is recommended that Auto

Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost.

a Press MENU and use C or c to select SETUP menu. Use b to highlight Auto Tuning. Press OK.

SETUP

Menu Language	English
Country	Germany

Ant/Cable/Satellite

Satellite Settings

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

b For DTV/ATV Tuning:

A screen will appear warning that previous programmes and settings will be deleted.

Auto Tuning

Previous settings will be lost!

Press EXIT for no change.

Tuning Mode

DTV and ATV

Start Scan

Use C or c to select DTV and ATV, DTV or ATV, if available, then highlight Start Scan and press OK to continue with the Auto Tuning.

NOTE: If you have selected “Others” for the Country field in the SETUP menu, and selected a tuning mode other than “DTV” , choose the optimum ATV broadcasting system (B/G, I, D/K or L).

The television will start to search for all available DTV and/or ATV services.

You must allow the television to complete the search.

When the search is complete, the Auto Tuning screen will display the services found.

English

19

English

SETTING UP YOUR TV

For Satellite Tuning:

A screen will appear warning that previous programmes and settings will be deleted.

Auto Tuning

Previous settings will be lost! Press EXIT for no change.

		Start Scan
Satellite			All
Search Option			Free to Air

Press B or b to highlight Satellite and then press C or c to select the desired satellite (No.1 Sat ~ No.4 Sat or All).

You can select Free to Air or All as the Search Option. Highlight Start Scan and press OK to continue with the Auto Tuning.

When the search is complete, the Auto Tuning screen will display the services found.

c Use b or B to move through the list to select a channel, and then press OK to view.

ATV Manual Tuning

Tuning

The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System.

Use C and c to move across the screen and select any of the ATV Manual Tuning options. Then use B or b to adjust the settings.

ATV Manual Tuning

System

1 I A C 2 0 V C R

1 2 3 4 5 6 7 8 9

1Position

The number to be pressed on the remote control to tune the channel.

2System

Specific to certain areas.

3Colour System

Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.

4Skip

Set Skip to On (8) or Off (() for the selected channel. See page 21

5Signal Class

The channel classification.

6Channel

The channel number on which a station is being broadcast.

7Search

Search up and down for a signal.

8Manual Fine Tuning

Only used if interference/weak signal is experienced. See page 74.

9Station

Station identification. Use the Bor band Cor cbuttons to enter up to seven characters.

To allocate a position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film in the media recorder, press PLAY, and then manually tune.

20

	SETTING UP YOUR TV
a Press MENU and use C or c to select the SETUP	g Each signal will show on the television. If it is not your
menu. Press b to highlight ATV Manual Tuning and	media recorder, press B or b again to restart the
press OK to select.	search.

SETUP

Menu Language	English
Country	Germany

Ant/Cable/Satellite

Satellite Settings

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

b Use B or b to highlight the desired position. We suggest Pos. 0 for a media recorder.

ATV Manual Tuning
	Pos.		Channel	Station
	1		C2

2S10

3C7

4S40

5C22

6C25

7C28

8C30

Different Channel numbers may be displayed.

c Press OK to select. If the channel chosen for the media recorder is set to skip, Skip should be removed before storing.

d Press cto select System and use B or b to change if required.

ATV Manual Tuning

System

1

I

A

C

2

0

e Then press c to select Search.

f Press B or b to begin the search. The search symbol will flash.

ATV Manual Tuning

Search

1

I

A

C

2

0

h When your media recorder signal is found, press c to move along to Station. Use B, b, C and c to put in the required characters, e.g. VCR.

ATV Manual Tuning

Station

1

I

A

C

2

0

V

C

R

i Press OK to save.

j Repeat for each position you want to tune, or press RETURN to return to the list of channels and select the next number to tune.

k Press EXIT when you have finished.

PLEASE NOTE

This television has direct channel entry if the channel numbers are known.

Select the ATV Manual Tuning screen in Step 3. Enter the Position number, the System, then C for standard (terrestrial) channels or S for cable channels and the Channel number. Press OK to save.

Skip

To prevent certain channels from being viewed, positions can be skipped.

a Select ATV Manual Tuning from the SETUP menu.

b Use Bor bto highlight the position to be skipped and press OK to select.

ATV Manual Tuning
	Pos.		Channel	Station
	1		C2

2S10

3C7

4		S40	ABC1
5		C22	ABC1

6C25

7C28

8C30

English

21

English

SETTING UP YOUR TV

c Press c to select Skip.

d Use B or b to turn Skip on. Press OK.

8 on the screen indicates a skipped position.

ATV Manual Tuning

Skip: On

1

I

A

C

2

0

e Press RETURN and repeat from Step 2 or press EXIT.

Each position has to be individually selected. To turn Skip off, repeat the procedure for each position.

Skipped positions cannot be selected by PU and Pu or by the controls on the television but can still be accessed by the number buttons on the remote control.

Sorting positions

Channels may be moved and saved to the position of your choice.

a Select ATV Manual Tuning from the SETUP menu.

b With the list of channels showing, use B or b to highlight the channel you want to move and press c.

ATV Manual Tuning
	Pos.	Channel	Station
	2	S10
	3	C7
	4	C40	ABC1
	5	C22	ABC1
	1	C2
	6	C25
	7	C28
	8	C30

c Use Bor b to move through the list to your preferred position. As you do so, the other channels will move to make room.

d Press C to save your move.

Repeat as necessary, and then press EXIT.

DTV Manual Tuning

NOTE: The content of this menu varies depending on the DTV input (Antenna, Cable, or Satellite) that is currently selected.

Manual Tuning

This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.

a Select DTV Manual Tuning from the SETUP menu and press OK.

DTV Manual Tuning

Signal Strength	WEAK	AVERAGE	STRONG
	GOOD
Quality
Channel			13

Start Scan

b Enter the multiplex number using the number buttons or use C or c to adjust the number up or down.

c Highlight Start Scan, and then press OK. The television will automatically search for that multiplex.

DTV Manual Tuning
	0 New Channels - Total 6
New Pos.	Name	Type
1	ABC ONE
2	ABC TWO

7 ABC THREE

40 ABC NEWS 24

51 ABCi

When the multiplex is found, any channels that are not currently in the channel list will be added and the channel information at the top of the screen will be updated.

d Repeat as necessary. Press EXIT to finish.

22

SETTING UP YOUR TV

Manual Tuning for DVB-C

When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows:

Frequency – input a specific frequency to be scanned

Modulation – choose from one of five QAM modulation options

Symbol Rate – input a specific baud rate (KS/s) to be used for the manual scan

Highlight Start Scan, and then press OK.

Manual Tuning for DVB-S

When Ant/Cable/Satellite is set to Satellite, DTV Manual Tuning items are as follows:

DTV Manual Tuning - Satellite

Signal Strength	WEAK		AVERAGE	STRONG
Quality	POOR
Satellite			ASTRA 28.2°E
Transponder				1/83
Frequency			10714 MHz
Symbol Rate			22000 KS/s
Polarisation				H
Search Option			Free to Air

Start Scan

Use B or b to highlight an item (Satellite, Transponder,

Frequency, Symbol Rate, Polarisation or Search Option), and then press C or c to select the required option.

Highlight Start Scan, and then press OK.

DTV Settings

Channels (Antenna/Cable)

The channel order may be changed to suit your personal preference.

a Select DTV Settings from the SETUP menu and press

OK.

b Select Channels and press OK.

DTV Settings

Channels
Subtitle and Audio
PIN Setting
Parental Control
Local Time Setting
Standby Channel Update	Off
DVB Character Set	Standard
Dynamic Scan	On

c For your convenience, you can jump to specific places in the list by one of two methods.

Channels			TV
Line No. 1/10
	Pos.		Name
	1		ABC ONE
	2		ABC TWO
	7		ABC THREE
	30		CABC Channel
	40		ABC NEWS 24
	51		ABCi
	822		AA
	823		AC

Line Number Jump — Use the number buttons

(0-9) to input the line number you want to select, and then press OK.

Station Letter Jump — Press CC or cc to jump to the next station name with a different initial letter.

It is also possible to change the Position number of a particular channel.

Renumber — Press the RED button to renumber the highlighted channel. Edit the channel number using the number buttons and press OK.

		Pos.			Name
	-	-	-	-	ABC ONE

English

23

English

SETTING UP YOUR TV

Move — Press the GREEN button to activate the Move feature. Use the B or b buttons to select the channel you wish to move and press OK to check. If you wish to move multiple channels at once, select

another channel and check in the same way. Repeat as necessary.

Once all desired channels have been checked, use the B or b buttons to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.

Channels (Satellite)

a Select DTV Settings from the SETUP menu and press

OK.

b Select Channels and press OK.

The satellite channel list will appear.

Channels	Satellite TV
Line No. 4/1200
Pos. Station	Satellite

Channels

Line No. 1/10

Pos. Name

1 ABC ONE

2	ABC TWO
7	ABC THREE

30	CABC Channel

40	ABC NEWS 24

51

ABCi

1

DDD

19.2°E

TV

2

AB

19.2°E

3

E

19.2°E

801

BBC

22.5°E

802

BB

22.5°E

803

BA

22.5°E

822

AA

25.6°E

823

AC

25.6°E

822	AA	c For your convenience, you can edit and sort your
823	AC	channel list.

Sort — Press the YELLOW button. A confirmation window will appear. Press C or c to select Yes and press OK.

Sort

Your existing channel order will be lost. Do you wish to continue?

Yes

The Sorting Type selection window will appear.

Sort

Sorting Type

A - Z

Sort

Press C or c to set the sorting type.

A - Z

Station name order (A to Z)

Channel Number Position No. order (numerical sequence)

Press b to highlight Sort and press OK.

Line Number Jump — Use the number buttons

(0-9) to input the line number you want to select, and then press OK.

Station Letter Jump — Press CC or cc to jump to the next station name with a different initial letter.

Satellite Jump — Press Z or z to jump to the next channel on a different Satellite.

Renumber — Same as Antenna/Cable channels. See page 23.

Move — Same as Antenna/Cable channels. See page 24.

Sort — Press the YELLOW button. A confirmation window will appear. Press C or c to select Yes and press OK.

The Sort menu will appear.

	Sort
	Group		By Satellite
	Sorting Type		Channel Number
	Preset Order		Yes
		Sort

24

SETTING UP YOUR TV

Group — Press C or c to select All or By Satellite.

Sorting Type — Press C or c to set the sorting type.

A - Z Station name order (A to Z)

Channel Number Position No. order (numerical sequence)

Preset Order — Press C or c to set Yes or No.

Dynamic Scan

If the broadcast information has changed in your DVB-T receiving area, the TV screen will display the message “Broadcast information has changed. Would you like to rescan now?”. Please follow the message. If you do not wish for the TV to detect changes and prompt you to rescan, you should set this feature to “Off”.

This item is displayed when Country is set to Germany,	a Select DTV Settings from the SETUP menu and press
and only applies to the Astra 19.2°E satellite.	OK.
Press b to highlight Sort and press OK.	b Press b to select Dynamic Scan and use C or c to
	select On.

Standby Channel Update

If the Standby Channel Update is set to On, when the TV is in standby mode, Digital Tuning is automatically executed and any new channels are saved.

a Select DTV Settings from the SETUP menu and press

OK.

b Press b to select Standby Channel Update and use

C or c to select On.

DVB Character Set

This feature allows you to manually select the character set (Standard = Table 0, West = Table 5 or Latin alphabet 9) to be used for DVB-C or DVB-T channels.

a Select DTV Settings from the SETUP menu and press

OK.

b Press bto select DVB Character Set and use Cor c to select Standard, West or Latin alphabet 9.

Location setting

You can select either Home or Store mode. Home is recommended for normal home use. Select Store when using the television for displaying in a shop, etc.

a Select Location from the SETUP menu.

b Press C or c to select Home or Store.

Analogue switch-off

This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.

This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption.

English

25

English

CONTROLS AND FEATURES

General controls

Quick Menu

Quick Menu helps you access some options quickly, such as

Picture Mode, Picture Size, More Information, Sleep Timer etc.

Press QUICK to display the Quick Menu and use B or b to select the option.

Quick Menu

Picture Mode	AutoView
Picture Size	Super Live
More Information
Channel Options
YouTube
Media Player
Photo Frame
Sleep Timer	00:00
Speakers	TV Speakers
Wireless Information

NOTE: Quick Menu items are different depending on the current mode.

Quick menu item example

	Mode	Quick menu item	Description
	When viewing a TV	Picture Mode	See page 31.
	programme or
		Picture Size	See page 29.
	pictures from the
	external input	More Information	See page 59.
		Channel Options	See page 62.
		YouTube	See page 45.
		Media Player	See page 47.
		Photo Frame	See page 54.
		Sleep Timer	See page 58.
		Speakers	See page 70.
		Wireless Information	See page 40.
	When using EPG	Genre Colour	See page 60.
		EPG Update/	See page 60.
		Cancel EPG Update
	Media Player (Multi	Sort	See page 50.
	View, List View)
		Interval Time	See page 50.
		Repeat	See page 50.
		Device Information	See page 50.
		Wireless Information	See page 40.
	Photo Frame	PICTURE	See page 31.

Selecting positions

To select a position, use the numbered buttons on the remote control.

Positions can also be selected using PU and Pu.

To display on-screen information such as position, input mode or stereo/mono signal, press. Press again to cancel.

The Time Display – analogue only

The time display facility allows the current (text service) time to be seen on the television screen.

Press Dwhilst watching a normal television broadcast to see the time display from the broadcaster. It will remain on screen for about 5 seconds.

NOTE: This display may not be available in some cases.

Stereo and Bilingual transmissions

For ATV programmes

If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear.

Stereo… Press sto select Stereo or Mono.

Bilingual… Bilingual transmissions are rare. If they are transmitted, the word Dual will be displayed. Choose the required programme number, and if the word Dual appears, press sto select Dual 1, Dual 2 or Mono.

For DTV programmes

For stereo or dual mono broadcasts, press sand use Cor c to select settings.

Mode Display	Pressing c
Stereo	Stereo S Left S Right
Dual mono	Dual 1 S Dual 2
Mono	–
Multichannel	–

For multi-audio track broadcasts, press srepeatedly to change the audio language (see ‘Audio language’ on page 63).

26