LCD Monitor
26HLC56
32HLC56
37HLC56
NOTE: THIS MONITOR DOES NOT CONTAIN A TUNER
A set-top box (i.e., cable box or analog/digital receiver) is required to receive: (1) analog and/or digital broadcast signals from an antenna; and (2) analog and/or digital cable. For more information, refer to the applicable connection and setup instructions in this owner’s manual.
For an overview of steps for setting up your new monitor, see page 7.
Owner’s Record
The model number and serial number are on the back of your monitor. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this monitor.
Model number: 
Serial number:
© 2006 TOSHIBA CORPORATION |
YC/M VX1A00011000 |
|
All Rights Reserved |
||
|
Dear Customer,
Thank you for purchasing this Toshiba Monitor. This manual will help you use the many exciting features of your new LCD monitor. Before operating your LCD monitor, please read this manual completely, and keep it nearby for future reference.
NOTE: THIS MONITOR DOES NOT CONTAIN A TUNER
A set-top box (i.e., cable box or analog/digital receiver) is required to receive: (1) analog and/or digital broadcast signals from an antenna; and (2) analog and/or digital cable. For more information, refer to the applicable connection and setup instructions in this owner’s manual.
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See item 19 on page 3.
WARNING: If you decide to wall mount this monitor, always use a UL-approved wall bracket appropriate for the size and weight of this monitor. The use of any wall bracket other than a UL-approved wall bracket appropriate for the size and weight of this monitor for wall mounting this monitor could result in serious bodily injury and/or property damage.
Child Safety
It Makes A Difference
Where Your TV Stands
Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:
The Issue
aIf you are like most consumers, you have a TV in your home. Many homes, in fact, have more than one TV.
aThe home theater entertainment experience is a growing trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands.
aSometimes TVs are improperly secured or inappropriately situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over,
causing unnecessary injury.
Toshiba Cares!
a The consumer electronics industry is committed to
making home entertainment enjoyable and safe.
aThe Consumer Electronics Association formed the
Home Entertainment Support Safety Committee, comprised of TV and consumer electronics furniture manufacturers, to advocate children’s safety and
educate consumers and their families about television safety.
Tune Into Safety
a One size does NOT fit all! Use appropriate furniture large enough to support the weight of your TV (and other electronic components).
aUse appropriate angle braces, straps, and anchors to secure your furniture to the wall (but never screw anything directly into the TV).
aCarefully read and understand the other enclosed instructions for proper use of this product.
aDo not allow children to climb on or play with furniture and TVs.
aAvoid placing any item on top of your TV (such as a VCR, remote control, or toy) that a curious child may reach for.
aRemember that children can become excited while watching a program and can potentially push or pull a TV over.
aShare our safety message about this hidden hazard of the home with your family and friends. Thank you!
2500 Wilson Blvd. Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690 www.CE.org
CEA is the Sponsor, Producer and Manager of the International CES®
2
Important Safety Instructions
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with dry cloth.
7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of
the polarized or grounding type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Additional Safety Precautions
14a) CAUTION: If the monitor is dropped and the cabinet or enclosure surface has been damaged or the monitor does not operate normally, take the following precautions:
•ALWAYS turn off the monitor and unplug the power cord to avoid possible electric shock or fire.
•NEVER allow your body to come in contact with any broken glass or liquid from the damaged monitor. The LCD panel inside the monitor contains glass and a toxic liquid. If the liquid comes in contact with your mouth or eyes, or your skin is cut by broken glass, rinse the affected area thoroughly with water and consult your doctor.
•ALWAYS contact a service technician to inspect the monitor any time it has been damaged or dropped.
15)CAUTION:
•To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.
•To prevent electric shock, match wide blade of plug to wide slot; fully insert.
Installation, Care, and Service
Installation
Follow these recommendations and precautions and heed all warnings when installing your monitor:
16)Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.
17)DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT DAMAGE!
Never place the monitor on an unstable cart, stand, or table. The monitor may fall, causing serious personal injury, death, or serious damage to the monitor.
18)To avoid damage to this product, never place or store the monitor in direct sunlight; hot, humid areas; or areas subject to excessive dust or vibration.
19)Always place the monitor on the floor or a sturdy, level, stable surface that can support the weight of the unit. To secure the monitor, use a sturdy tie from the hooks on the rear of the monitor pedestal to a wall, pillar, or other immovable structure.
Make sure the tie is tight, secure, and parallel to the floor.
1" |
Sturdy tie (as short as possible; 1" min.) |
|
min. |
Hooks |
Clip |
|
||
|
Clip |
|
Monitor side |
Monitor top |
|
20)The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
21)Never block or cover the slots or openings in the monitor cabinet back, bottom, and sides. Never place the monitor:
• on a bed, sofa, rug, or similar surface;
• too close to drapes, curtains, or walls; or
• in a confined space such as a bookcase, built-in cabinet, or any other place with poor
ventilation.
The slots and openings are provided to protect the monitor from overheating and to help maintain reliable operation of the monitor. Leave a space of at least 1 (one) inch around the monitor.
3
22)Always place the back of the monitor at least one (1) inch away from any vertical surface (such as a wall) to allow proper ventilation.
23)Never allow anything to rest on or roll over the power cord, and never place the monitor where the power cord is subject to wear or abuse.
24)Never overload wall outlets and extension cords.
25)Always operate this equipment from a 120 VAC, 60 Hz power source only.
26)Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).
Ground clamp
Electric service equipment
Ground clamps 
Antenna lead-in wire
Antenna discharge unit (NEC Section 810-20)
Grounding conductors (NEC Section 810-21)
Power service grounding
electrode system (NEC Art 250 Part-H)
27)
DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
•Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.
•Never attempt to install any of the following during lightning activity: a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.
Care
For better performance and safer operation of your TOSHIBA monitor, follow these recommendations and precautions:
28)If you use the monitor in a room whose temperature is 32 ºF (0 ºC) or below, the picture brightness may vary until the LCD warms up. This is not a sign of malfunction.
29) Always unplug the monitor before cleaning. Gently wipe the display panel surface (the monitor screen) using a dry, soft cloth only (cotton, flannel, etc.). A hard cloth may damage the
surface of the panel. Avoid
contact with alcohol, thinner, benzene, acidic or alkaline solvent cleaners, abrasive cleaners, or chemical cloths, which may damage the surface. Never spray volatile compounds such as insecticide on the cabinet. Such products may damage or discolor the cabinet.
30)
WARNING:
RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind into the monitor cabinet slots.
31)While it is thundering, do not touch the connecting cables or apparatus.
32)For added protection of your monitor from lightning and power surges, always unplug the power cord and disconnect the antenna from the monitor if you leave the monitor unattended or unused for long periods of time.
33)During normal use, the monitor may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord and contact a Toshiba Authorized Service Center.
34) |
WARNING: RISK OF |
|
SERIOUS PERSONAL |
|
INJURY OR EQUIPMENT |
|
DAMAGE! |
Never strike the screen with a sharp or heavy object.
35)• The LCD screen of this product can be damaged by ultraviolet radiation from the sun. When selecting a location for the monitor, avoid locations where the screen may be exposed to direct sunlight, such as in front of a window.
•Never touch, press, or place anything on the LCD screen. These actions will damage the LCD screen. If you need to clean the LCD screen, follow the instructions in item 29 on this page.
Service
36)
WARNING:
RISK OF ELECTRIC SHOCK!
Never attempt to service the monitor yourself. Opening and removing the covers may expose you to dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Center.
37)If you have the monitor serviced:
•Ask the service technician to use only replacement parts specified by the manufacturer.
•Upon completion of service, ask the service technician to perform routine safety checks to determine that the monitor is in safe operating condition.
38)The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury.
When the monitor reaches the end of its useful life, dispose of the used monitor by the approved method for your area, or ask a qualified service technician to properly dispose of the monitor.
Note: The lamp unit contains mercury, the disposal of which may be regulated due to environmental considerations. For disposal or
recycling information, contact your local authorities or the Electronics Industries Alliance (www.eiae.org).
4
Welcome to Toshiba
Thank you for purchasing this Toshiba monitor, one of the most innovative LCD monitors on the market.
This manual applies to models 26HLC56, 32HLC56, and 37HLC56. The model and serial numbers are on the back of your monitor. Write these numbers in the space provided on the front cover of this manual for your records.
Instructions in this manual are based on using the remote control. You can also use the controls on the monitor if they have the same name as those on the remote control.
Please read all the safety and operating instructions carefully, and keep the manual for future reference.
FCC Compliance Statement (Part 15):
The Toshiba 26HLC56, 32HLC56, and 37HLC56 LCD Color Monitors comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation.
The party responsible for compliance to these rules is: Toshiba America Consumer Products, L.L.C.
82 Totowa Rd. Wayne, NJ 07470. Ph: 1-800-631-3811
Note: This equipment has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications to this equipment not expressly approved by Toshiba could void the user’s authority to operate this equipment.
Important notes about your LCD monitor
The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible for perceived issues resulting from these symptoms.
1)An afterimage (ghost) may appear on the screen if a fixed, non-moving image is displayed for a long period of time. The afterimage is not permanent and will disappear in a short period of time.
2)The LCD panel contained in this monitor is manufactured using an extremely high level of precision technology; however, there may be an occasional pixel (dot of light) that does not operate properly (does not light, remains constantly lit, etc.). This is a structural property of LCD technology, is not a sign of malfunction, and is not covered under your warranty. Such pixels are not visible when the picture is viewed from a normal viewing distance.
Note: Interactive video games that involve shooting a “gun” type of joystick at an on-screen target may not work with this monitor.
Trademark Information
•WOW, SRS and l symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc.
•HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
5
Contents
Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Features of your new monitor. . . . . . . . . . . . . . . . . . . . . . . . . 7 Overview of steps for installing, setting up, and
using your new monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Front and side panel controls and connections . . . . . . . . . . . . 8 Back panel connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 2: Connecting your Monitor . . . . . . . . . . . . . . . . . . .10
Overview of cable types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About the connection illustrations . . . . . . . . . . . . . . . . . . . . 10 Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Connecting a VCR and Cable box . . . . . . . . . . . . . . . . . . . . 11 Connecting a DVD player with ColorStream® (component
video), a VCR, and a satellite receiver. . . . . . . . . . . . . . 12 Connecting two VCRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Connecting a camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Connecting an HDMI™ or DVI device to the
HDMI input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 HDMI device connection . . . . . . . . . . . . . . . . . . . . . . . . 14 DVI device connection. . . . . . . . . . . . . . . . . . . . . . . . . . 14 Connecting a personal computer (PC) . . . . . . . . . . . . . . . . . 15
Chapter 3: Using the remote control . . . . . . . . . . . . . . . . . . .16
Preparing the remote control for use. . . . . . . . . . . . . . . . . . . 16 Installing the remote control batteries . . . . . . . . . . . . . . . . . 16 Remote control effective range. . . . . . . . . . . . . . . . . . . . . . . 16 Learning about the remote control . . . . . . . . . . . . . . . . . . . . 17 Using the remote control to operate your other devices . . . . 18 Remote Control functional key chart . . . . . . . . . . . . . . . . . . 19 Programming the remote control to operate your
other devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Chapter 4: Menu layout and navigation . . . . . . . . . . . . . . . . .23
Menu Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Navigating the menu system. . . . . . . . . . . . . . . . . . . . . . . . . 23
Chapter 5: Setting up your Monitor . . . . . . . . . . . . . . . . . . . .24
Selecting the menu language . . . . . . . . . . . . . . . . . . . . . . . . 24 Setting the HDMI™ audio mode . . . . . . . . . . . . . . . . . . . . . . 24
Chapter 6: Using the Monitor’s features. . . . . . . . . . . . . . . . .25
Selecting the video input source to view . . . . . . . . . . . . . . . 25 Labeling the video input sources . . . . . . . . . . . . . . . . . . . . . 25 Selecting the picture size . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Adjusting the Picture Position . . . . . . . . . . . . . . . . . . . . . . . 27 Using the auto aspect ratio feature . . . . . . . . . . . . . . . . . . . . 28 Using the blue screen function . . . . . . . . . . . . . . . . . . . . . . . 28 Selecting the gray level for 4:3 mode side panels . . . . . . . . 28 Selecting the cinema mode
(480i signals only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Adjusting the picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Selecting the picture mode . . . . . . . . . . . . . . . . . . . . . . . 29 Adjusting the picture quality . . . . . . . . . . . . . . . . . . . . . 30 Using the black stretch feature. . . . . . . . . . . . . . . . . . . . 30 Using MPEG noise reduction. . . . . . . . . . . . . . . . . . . . . 30 Using CableClear®/DNR (digital noise reduction) . . . . 31 Selecting the color temperature . . . . . . . . . . . . . . . . . . . 31 Using the closed caption mode . . . . . . . . . . . . . . . . . . . . . . . 32 Closed Caption Reception Adjustment . . . . . . . . . . . . . 32 Adjusting the audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Muting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Adjusting the audio quality . . . . . . . . . . . . . . . . . . . . . . 33 Using the SRS WOW™ surround sound feature . . . . . . 33 Using the StableSound® feature. . . . . . . . . . . . . . . . . . . 34
Using the Locks menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Entering the PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . 34 If you cannot remember your PIN code. . . . . . . . . . . . . 34 Using the V-Chip menu . . . . . . . . . . . . . . . . . . . . . . . . . 35 Enable Blocking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 TV Rating (Independent rating system for
broadcasters) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 MPAA Rating (Independent rating system for
movies) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Blocking Option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Unlocking programs temporarily . . . . . . . . . . . . . . . . . . 37 Changing your PIN code . . . . . . . . . . . . . . . . . . . . . . . . 37 Using the PC setting feature . . . . . . . . . . . . . . . . . . . . . . . . . 37 PC/HDMI Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Setting the sleep timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Setting the On timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Displaying the monitor’s settings on-screen using
RECALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Understanding the last mode memory feature . . . . . . . . . . . 39
Chapter 7: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 40
General troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Chapter 8: Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Limited United States Warranty for LCD Monitors
26” and Larger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Limited Canada Warranty
for LCD Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
6
Chapter 1: Introduction
Features of your new monitor
The following are just a few of the many exciting features of your new Toshiba widescreen LCD monitor:
•Two sets of ColorStream® HD high-resolution component video inputs (- pages 9 and 12).
•HDMI™ digital, high-definition multimedia interface (- pages 9 and 14).
•SRS WOW™ audio technologies (- page 33).
•CableClear® DNR digital picture noise reduction (- page 31).
•PC IN (Analog RGB) computer input (- pages 9 and 15).
Overview of steps for installing, setting up, and using your new monitor
Follow these steps to set up your monitor and begin using its many exciting features.
1 Carefully read the important safety, installation, care, and service information (-pages 2–4). Keep this manual for future reference.
2 Observe the following when choosing a location for the monitor:
•Place the monitor on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure
the monitor to a wall, pillar, or other immovable structure (- page 3).
•Place the monitor in a location where light does not reflect on the screen.
•Place the monitor far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the monitor. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY.
3 Do not plug in any power cords until AFTER you have connected all cables and devices to your monitor.
4 BEFORE connecting cables or devices to the monitor, learn the functions of the monitor’s connections and controls (- pages 8–9).
5 Connect your other electronic device(s) to the monitor (- pages 10–15).
6 Install the batteries in the remote control (- page 16).
7 See “Learning about the remote control” (-page 17) for an overview of the buttons on the remote control.
8 Program the remote control to operate your other device(s) (- pages 18–22).
9 AFTER connecting all cables and devices, plug in the power cords for your monitor and other devices. Press POWER on the monitor control panel or remote control to turn on the monitor.
10 See “Menu layout and navigation” for a quick overview of the monitor’s menu system (- page 23).
11 For details on using the monitor’s features, see Chapter 6.
12 For help, refer to the Troubleshooting section (- Chapter 7).
13 For technical specifications and warranty information, see Chapter 8.
14 Enjoy your new monitor!
7
Chapter 1: Introduction
Front and side panel controls and connections
Monitor front |
Monitor Side panel |
|
|
|
|
8
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Control panel |
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
5 |
4 |
3 |
2 |
1 |
1Red LED — Red light indicates power is on.
2Remote sensor — Point the remote control toward the
remote sensor. See “Remote control effective range” (- page 16).
3POWER — Press to turn the monitor on and off.
4VOLUME C c — When no menu is on-screen, these buttons adjust the volume level. When a menu is onscreen, these buttons function as left/right menu navigation buttons.
5MENU — Press to access the menu system (- page 23).
6INPUT (ENTER) — Repeatedly press to change the source you are viewing (VIDEO-1/ColorStream HD-1, VIDEO-2, ColorStream HD-2, HDMI, or PC.
When a menu is on-screen, the INPUT button on the monitor control panel functions as the Enter button.
7ARROWS BbC c — When a menu is on-screen, these buttons function as up/down/left/right menu navigation buttons.
8VIDEO-2 IN — Standard (composite) video and standard (analog) audio inputs plus optional S-video input for connecting devices with either composite video or S-video output.
Note:
•Standard (composite) video and S-video cables carry only video information; separate audio cables are required for a complete connection.
•Do not connect both a composite video and an S-video cable to VIDEO-2 simultaneously or the picture performance will be unacceptable.
8
Chapter 1: Introduction
Back panel connections
For an explanation of cable types and connections, see Chapter 2 (- page 10).
Monitor back
1
Power cord
Cable Clamper
3 4
2 |
|
|
|
|
|
|
5 |
6 |
|
|
|||
|
|
|||||
1A/V OUT — Composite video and analog audio outputs for connecting a VCR for editing and dubbing.
2ColorStream® HD-1 and ColorStream® HD-2 —
Two sets of ColorStream® high-definition component video inputs (with analog audio inputs) for connecting devices with component video output, such as a Toshiba DVD player with ColorStream®.
Note: Component video cables carry only video information; separate audio cables are required for a complete connection.
3PC/HDMI (AUDIO) IN — One set of shared analog audio inputs (shared between the PC IN and HDMI IN
terminals). Their use can be configured in the Set Up menu (- page 38).
4VIDEO-1 IN — Composite video and analog audio inputs.
Note: VIDEO-1 input terminals are shared with ColorStream HD-1 input terminals. When component video cables are connected to the ColorStream HD-1 terminals and ColorStream HD-1 is the current input mode, the VIDEO-1 input terminals will not carry any signals.
5PC IN — For use when connecting a personal computer (- page 15).
6HDMI™ IN — High-Definition Multimedia Interface input receives digital audio and uncompressed digital
video from an HDMI device, or uncompressed digital video from a DVI device (- item 3, at left; also - page 14).
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
9
Chapter 2: Connecting your Monitor
Overview of cable types
Standard A/V cables (red/white/yellow)
Standard A/V cables (composite video and analog audio) usually come in sets of three, and are for use with video devices with analog audio and composite video output. These cables (and the related inputs on your monitor) are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio.
S-video cable
S-video cable is for use with video devices with S-video output. Separate audio cables are required for a complete connection.
Note: An S-video cable provides better picture performance than a composite video cable. If you connect an S-video cable, be sure to disconnect the standard (composite) video cable or the picture performance will be unacceptable.
Component video cables (red/green/blue)
Component video cables come in sets of three and are for use with video devices with component video output. (ColorStream® is Toshiba’s brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection.
Note: Component video cables provide better picture performance than a standard (composite) video or S-video cable.
HDMI™ cable
HDMI (High-Definition Multimedia Interface) cable is for use with devices with HDMI output. HDMI cable delivers digital audio and video in its native format. HDMI cable carries both video and audio information; therefore, separate audio cables are not required for a complete HDMI device connection (- page 14).
Note: HDMI cable provides better picture performance than a standard (composite) video or S-video cable.
Analog RGB (15-pin) computer cable
Analog RGB (15-pin) computer cable is for connecting a PC to the monitor’s PC IN terminal (- page 15).
About the connection illustrations
You can connect different types and brands of devices to your monitor in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device’s owner’s manual.
10
Chapter 2: Connecting your Monitor
Connecting a VCR
You will need:
•coaxial cable
•standard A/V cables
–For better picture performance, if your VCR has S-video, connect an S-video cable and standard (analog) audio cables to the VIDEO-2 inputs on the side panel (instead of the VIDEO-1 inputs). Do not connect both types of video cable to VIDEO-2 at the same time or the picture performance will be unacceptable.
–If you have a mono VCR, connect L/MONO on the monitor to your VCR’s audio out terminal using the white audio cable only.
From Cable TV or antenna
Stereo VCR
VIDEO |
AUDIO |
L |
R |
IN from ANT |
IN |
CH 3 |
|
CH 4 |
|
OUT
OUT to TV
L R
Monitor's upper back panel
To view the VCR:
Turn ON the VCR. Select the Video 1 video input source on the monitor.*
*To select the video input source, press +on the remote control (- page 25). To program the monitor’s remote control to operate other devices, see “Using the remote control to operate your other devices” on page 18.
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Law and may subject you to civil and criminal liability.
Connecting a VCR and Cable box
You will need:
•coaxial cables
•standard A/V cables
–For better picture performance, if your VCR has S-video, connect an S-video cable and standard (analog) audio cables to the VIDEO-2 inputs on the side panel (instead of the VIDEO-1 inputs). Do not connect both types of video cable to VIDEO-2 at the same time or the picture performance will be unacceptable.
–If you have a mono VCR, connect L/MONO on the monitor to your VCR’s audio out terminal using the white audio cable only.
–When you use a Cable box, you may not be able to use the remote control to program or access certain features on the monitor.
Cable box |
From Cable TV |
||
OUT |
CH 3 |
IN |
|
|
CH 4 |
|
|
|
Stereo VCR |
|
|
|
|
VIDEO |
AUDIO |
|
|
L |
R |
|
|
IN from ANT |
IN |
|
|
CH 3 |
|
|
|
CH 4 |
|
|
|
OUT to TV |
OUT |
|
|
|
|
|
|
L |
R |
Monitor's upper back panel
To view basic and premium Cable channels:
Turn ON the VCR. Select the Video 1 video input source on the monitor.* Tune the VCR to channel 3 or 4 (whichever channel the cable box output is set to). Use the cable box controls to change channels.
*To select the video input source, press +on the remote control (- page 25). To program the monitor’s remote control to operate other devices, see “Using the remote control to operate your other devices” on page 18.
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Law and may subject you to civil and criminal liability.
11
Chapter 2: Connecting your Monitor
Connecting a DVD player with ColorStream® (component video), a VCR, and a satellite receiver
Your monitor has two sets of ColorStream® HD (high definition component video) inputs.
You will need:
•coaxial cable
•standard A/V cables
–For better picture performance, if your VCR has S-video, connect an S-video cable and standard (analog) audio cables to the VIDEO-2 inputs. Do not connect both types of video cable to VIDEO-2 at the same time or the picture performance will be unacceptable.
–If you have a mono VCR, connect L/MONO on the monitor to your VCR’s audio out terminal using the white audio cable only.
•standard audio cables
•component video cables
–You can connect the component video cables (plus audio cables) from the DVD player or satellite receiver to either set of ColorStream terminals on the monitor (HD-1 or
HD-2). The ColorStream HD-1 and HD-2 terminals can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance.
–If your DVD player or satellite receiver does not have component video or S-video, connect standard A/V cables to VIDEO-1. If your DVD player has HDMI video, see page 14.
To view the DVD player:
Turn ON the DVD player. Select the ColorStream HD-1 video input source on the monitor.*
To view satellite programs using the component video connections:
Turn on the satellite receiver. Select the ColorStream HD-2 video input source on the monitor.*
To view the VCR or view and record antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want to watch. Select the Video 2 video input source on the monitor.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream HD-1 video input source on the monitor* to view the DVD.
*To select the video input source, press +on the remote control (- page 25). To program the monitor’s remote control to operate other devices, see “Using the remote control to operate your other devices” on page 18.
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Law and may subject you to civil and criminal liability.
From antenna
Stereo VCR
VIDEO |
AUDIO |
L |
R |
IN from ANT |
IN IN |
CH 3 |
|
CH 4 |
|
OUT to TV |
OUT |
|
|
L |
R |
Monitor's upper back panel
Monitor's right side panel
|
|
|
DVD player with |
|
|
|
|
component video |
|
|
|
|
|
AUDIO |
|
|
|
|
OUT |
Y |
PB |
PR |
|
L |
|
|
|||
S-VIDEO |
COMPONENT VIDEO |
VIDEO |
R |
|
OUT |
|
|
OUT |
|
From satellite dish
|
|
|
|
|
AUDIO |
|
|
|
|
|
OUT |
|
Y |
PB |
PR |
|
L |
Satellite S-VIDEO |
COMPONENT VIDEO |
VIDEO |
R |
||
IN |
OUT |
|
|
OUT |
|
Satellite receiver with component video
12
Chapter 2: Connecting your Monitor
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR (“VCR1” in the illustration below) to a second VCR (“VCR2”) while watching a videotape.
You will need:
•coaxial cable
•standard A/V cables
Note: Do not connect the same VCR to the output and input jacks on the monitor at the same time. To dub or edit, VCR 2 must select LINE IN, and the monitor must select Video 1.
From antenna
Stereo VCR 1 (plays)
VIDEO |
AUDIO |
L |
R |
IN from ANT |
IN |
CH 3 |
|
CH 4 |
|
OUT to TV |
OUT |
|
|
L |
R |
Monitor's upper back panel
Stereo VCR 2 (records)
VIDEO |
AUDIO |
L |
R |
IN from ANT |
IN |
CH 3 |
|
CH 4
OUT
OUT to TV
L R
The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Law and may subject you to civil and criminal liability.
Connecting a camcorder
You will need:
•standard A/V cables
–For better picture performance, if your camcorder has S-video, connect an S-video cable (plus the audio cables) to VIDEO-2 on the monitor’s side panel.
Camcorder
VIDEO AUDIO
OUT
L 
R 
VIDEO-2 inputs on monitor's right side panel
To view the camcorder video:
Select the Video 2 video input source on the monitor.*
*To select the video input source, press +on the remote control (- page 25). To program the monitor’s remote control to operate other devices, see “Using the remote control to operate your other devices” on page 18.
13
Chapter 2: Connecting your Monitor
Connecting an HDMI™ or DVI device to the HDMI input
The HDMI input on your monitor receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-861B–compliant[1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
The HDMI input is designed for best performance with 1080i signals but will also accept and display 480i, 480p and 720p signals.
NOTE: DO NOT CONNECT A PC USING THE HDMI PORT. Always use the monitor’s PC IN (VGA) port to connect a PC.
•The HDMI port is not designed to support input from a PC.
•Only monitor models that include a PC IN (VGA) port are suitable for connection to a PC.
HDMI device connection
To connect an HDMI device, you will need:
•one HDMI cable (type A connector) per HDMI device
–For proper operation, it is recommended that you use as short an HDMI cable as possible. You should not encounter difficulty if you use an HDMI cable shorter than 16.4 ft (5m).
–HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration).
–See “Setting the HDMI™ audio mode” on page 24.
HDMI device
VIDEO |
AUDIO |
HDMI OUT |
|
L |
R |
||
|
IN IN
OUT
L R
Monitor's lower back panel
Note: If the audio output mode of the HDMI device is other than the PCM mode, the monitor’s speakers will not output sound.
DVI device connection
To connect a DVI device, you will need:
•one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device
–For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m).
•one pair of standard analog audio cables per DVI device
–An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration).
–See “Setting the HDMI™ audio mode” on page 24.
DVI device
VIDEO |
AUDIO |
DVI/HDCP |
L |
R |
OUT |
|
IN IN |
|
|
OUT |
L |
R |
Monitor's upper back panel
Monitor's lower back panel
Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:
•When turning on your electronic components, turn on the monitor first, and then the HDMI or DVI device.
•When turning off your electronic components, turn off the HDMI or DVI device first, and then the monitor.
[1]EIA/CEA-861-861B compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of highdefinition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the monitor.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
14
Loading...