28/32ZH46/47
Series
Owner's manual
true experience
Contents
Remember…
?For television 
operation queries, 
please ring the 
helpline…
SETTING UP |
|
Safety precautions – Some do’s and don’ts for you to be aware of |
3 |
Installation and important information |
4 |
The remote control – an at-a-glance guide |
5 |
Connecting external equipment – a guide to connecting equipment to the back of the television |
6 |
Front connections and controls – switching on the television, standby, using the front controls, |
|
headphone socket, connecting equipment to the front of the television |
7 |
Selecting the language, country and system |
8 |
Auto tune |
8 |
Sorting programme positions |
8 |
Manual tune – an alternative to Auto tuning, tuning a programme position for a VCR, |
|
direct entry of channels |
9 |
Programme skip |
10 |
FEATURES AND CONTROLS |
|
General controls – changing programme position |
11 |
Sound controls – volume, sound mute, bass/treble/balance, volume correction, dynamic sub bass |
11 |
Stereo and bilingual transmissions – stereo or dual language broadcasts |
11 |
Widescreen viewing |
12 |
Picture controls – picture preferences (contrast, brightness, colour, sharpness), noise reduction, |
|
black stretch, picture position, automatic format (widescreen), still picture |
13 |
Virtual Dolby Surround |
14 |
The timer and time display – setting the television to turn on and off and time display |
15 |
Panel lock and blue screen – disabling the buttons on the television, blue screen |
15 |
Input selection and AV connections – input and output sockets for connected equipment |
16 |
TELETEXT |
|
Setting up, general information, Auto and List modes |
17 |
Control buttons |
18 |
PROBLEM SOLVING |
|
Questions and Answers – answers to some of the more common queries including |
|
manual fine tuning |
19 |
INFORMATION |
|
Specifications and accessories – technical information about the television, supplied accessories |
20 |
2
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Air Circulation
Heat Damage
Mains Supply
Do
Do not
DON'T remove any fixed cover as this may expose dangerous voltages.
DON'T obstruct the ventilation openings of the equipment with items such as newspapers,
will cause the equipment.
DON'T allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.
DON’T place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.
DON'T use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety, always fit the manufacturers’ approved stand or legs with the fixings provided according to the instructions.
DON'T listen to headphones at high volume, as such use can permanently damage your hearing.
DON'T leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure your family know how to do this. Special arrangements may need to be made for infirm or handicapped people.
DON'T continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.
ABOVE ALL – NEVER let anyone, especially children, push anything into holes, slots or any other openings in the case – this could result in a fatal electric shock.
NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.
TO FULLY DISCONNECT THE TELEVISION, SWITCH OFF THE MAINS SOCKET AND REMOVE THE POWER PLUG.
3
Installation and important information
Where to install
Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Place on a sturdy platform, the mounting surface should be flat and steady, it should then be secured to the wall with a sturdy tie using the hook on the back of the television, this will prevent it from falling over. A stand is available for this television. Use curtains or blinds to prevent direct sunlight falling on the screen.
Make sure the television is located in a position where it cannot be pushed or hit by objects and that small items cannot be inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Disposal…
When the television reaches the end of its useful life please dispose of it in accordance with Local Government Regulations or at a recycling centre.
If stationary images generated by teletext, channel identification logos, computer displays, video games, on screen menus, etc. are left on the television screen for any length of time they could become conspicuous, it is always advisable to reduce both the brightness and contrast settings.
4
The remote controlUP
Simple at-a-glance reference of your remote control.
When using a TOSHIBA VCR or DVD: pressmto PAUSE
presswto EJECT
press lqto SKIP-REWIND presssl to SKIP-FORWARD press rto PLAY
presspto STOP press qto REWIND
presssto FAST FORWARD
To display teletext
For On/Standby mode
To select input from external sources
Widescreen viewing
To exit Menus
To change programme positions and teletext pages
To alter the volume
When using menus the arrows move the cursor on the screen up, down, left or right. OK to confirm your selection
When in television mode: u Still picture
OI/II Stereo/bilingual reception 8/9 Time display
When in Teletext mode:
r To reveal concealed text q To hold a wanted page
s To enlarge teletext display size 8/9 To select a page whilst viewing a
normal picture
Inserting batteries and effective range of the remote
5
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket.
SCART 2 (EXT2)
the back of your television
decoder |
could |
|
Digital |
Satellite, |
|
to Air or any |
||
compatible |
||
. |
|
|
decoder*
VCR
IN
OUT
SAT
WE |
SCART LEADS IN |
ADDITION |
WHEREVER |
POSSIBLE |
|
Aerial |
|
Connect |
rear of the |
television |
a video |
recorder |
cable is connected |
through |
the video |
recorder |
|
SCART |
|
Connect |
socket to the |
television |
socket to the |
television |
SAT socket to |
the |
|
Before |
decoder and |
video |
|
A wide variety of external equipment can be connected to the back of the television, therefore the relevant owners manuals for all additional equipment must be referred to.
We recommend SCART 1 for a decoder, SCART 2 for a VCR and Input 3 for additional equipment.
If connecting S-VIDEO equipment, set the INPUT for
EXT2. See page 16.
If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button.
To recall external equipment, press Bto select between EXT1, EXT2 and EXT3.
6
Loading...