Toshiba 32RL853, 32RL858, 37RL853, 37RL858, 42RL853 User Manual

RL85* Digital

Series

English

Contents
INSTALLING YOUR TV
Safety Precautions .............................................................................	4
Installation and important information .....................................	5
The remote control ...........................................................................	6
Inserting batteries and effective range ............................	6
CONNECTING YOUR TV
Connecting external equipment ..................................................	7
Connecting an HDMI® or DVI device to the HDMI input .....	8
To connect an HDMI device .................................................	8
To connect a DVI device ........................................................	8
HDMI’s ARC (Audio Return Channel) feature .................	8
REGZA-LINK connection ..................................................................	9
Connecting a computer ................................................................	10
To connect a PC to the RGB/PC terminal .......................	10
To connect a PC to the HDMI terminal ...........................	10
Connecting a home network ......................................................	11
To connect the TV to a home network - Wired ...........	11
To connect the TV to a home network with an
internet connection - Wireless ......................................	11
Controls and input connections .................................................	12
Switching on ............................................................................	12
Using the remote control ....................................................	12
Using the controls and connections ...............................	12
SETTING UP YOUR TV
Startup Application .........................................................................	13
Quick Setup ..............................................................................	13
Ant/Cable In (if available) ....................................................	14
Auto Tuning .............................................................................	15
ATV Manual Tuning .........................................................................	15
Tuning ........................................................................................	15
Skip ..............................................................................................	17
Sorting positions ....................................................................	17
DTV Manual Tuning ........................................................................	18
Manual Tuning ........................................................................	18
Manual Tuning for DVB-C ...................................................	18
DTV Settings ......................................................................................	18
Channels ...................................................................................	18
Standby Channel Update ....................................................	19
DVB Character Set ..................................................................	19
Dynamic Scan ..........................................................................	19
Location setting ......................................................................	19
Analogue switch-off ............................................................	19
CONTROLS AND FEATURES
General controls ...............................................................................	20
Quick Menu ..............................................................................	20
Selecting positions ................................................................	20
The Time Display – analogue only .................................	20

Stereo and Bilingual transmissions .................................	20
Sound controls .................................................................................	21
Volume controls and mute sound ...................................	21
Dual .............................................................................................	21
Balance, Bass and Treble .....................................................	21
Surround Settings ..................................................................	21
Dolby Volume® .......................................................................	21
Dynamic Range Control ......................................................	21
Audio Level Offset .................................................................	22
Headphone Settings .............................................................	22
Audio Description .................................................................	22
Widescreen viewing .......................................................................	23
Picture controls ................................................................................	25
Picture Mode ...........................................................................	25
Picture preferences ...............................................................	25
Reset ...........................................................................................	25
ColourMaster ...........................................................................	25
Base Colour Adjustment .....................................................	26
Colour Temperature .............................................................	26
Auto Brightness Sensor Settings ......................................	26
Active Backlight Control ......................................................	27
Black/White Level ..................................................................	27
Static Gamma ..........................................................................	27
MPEG NR – Noise Reduction ..............................................	27
DNR – Digital Noise Reduction .........................................	27
Resolution+ ..............................................................................	27
Cinema Mode ..........................................................................	27
Resetting the advanced picture settings ......................	28
Expert Picture Settings ........................................................	28
Control Visualization ............................................................	29
Automatic Format (Widescreen) ......................................	29
4:3 Stretch ................................................................................	29
Picture Position ......................................................................	30
Picture still ................................................................................	30
Blue Screen ..............................................................................	30
HDMI Information Display ..................................................	30
Using your home network ...........................................................	31
Setting up the Network .................................................................	32
Wireless Setup ........................................................................	32
Advanced Network Setup ..................................................	34
DNS Setup ................................................................................	35
Network Connection Test ...................................................	36
Using the software keyboard ......................................................	36
Setting up the Media Renderer feature ...................................	37
Installation ................................................................................	37
Media Renderer ......................................................................	37
Device Name Setup ..............................................................	37
Web Password Setup ............................................................	38
Media Controller Setup .......................................................	38
Maximum Volume Setup ....................................................	38
Using BBC iPlayer .............................................................................	39
Using YouTube™ ..............................................................................	39

2

Using the Function Menu ...................................................	40
Flickr .....................................................................................................	42
Using the Media Player ..................................................................	42
Basic operation .......................................................................	43
Viewing photo files
(on a DLNA CERTIFIED™ Server or USB device) .......	44
Viewing movie files
(on a DLNA CERTIFIED™ Server or USB device) .......	46
Playing music files
(on a DLNA CERTIFIED™ Server or USB device) .......	47
Using the Photo Frame feature ..................................................	49
To open Photo Frame ...........................................................	49
Setting the features ...............................................................	49
Other features ...................................................................................	51
Panel Lock .................................................................................	51
The timers ...........................................................................................	51
Programme Timers – digital only .....................................	51
On Timer ....................................................................................	52
Sleep Timer ..............................................................................	52
Energy Saving Settings ..................................................................	53
Automatic Power Down ......................................................	53
No Signal Power Down ........................................................	53
Digital on-screen information and Programme Guide ......	53
Information ..............................................................................	53
Guide ..........................................................................................	54
Genre selection/searching ..................................................	55
Digital settings – parental control ............................................	55
Setting the PIN ........................................................................	55
Parental Setup .........................................................................	56
Network Lock ..........................................................................	56
Digital settings – Channel Options ..........................................	56
Selecting favorite channels ................................................	56
Favorite Channel Lists ..........................................................	56
Skip channels ...........................................................................	57
Locking channels ...................................................................	57
Digital settings – other settings .................................................	57
Subtitles .....................................................................................	57
Audio languages ....................................................................	57
Common Interface ................................................................	58
Software Upgrade and Licences ................................................	58
Auto Upgrade ..........................................................................	58
Searching for New Software ..............................................	58
Network Upgrade ..................................................................	59
Software Licences ..................................................................	59
System Information and Reset TV ..............................................	59
System Information ...............................................................	59
Reset TV .....................................................................................	59
PC Settings .........................................................................................	60
Horizontal and Vertical Position .......................................	60
Clock Phase ..............................................................................	60
Sampling Clock .......................................................................	60
Reset ...........................................................................................	60

Input selection and AV connections ........................................	61
Input selection ........................................................................	61
External input skip .................................................................	61
Labeling video input sources ............................................	62
Colour Decoding ....................................................................	62
PC Audio ...................................................................................	62
HDMI 3 Audio ..........................................................................	62
HDMI Settings .........................................................................	63
Digital Audio Output ............................................................	63
Using REGZA-LINK ...........................................................................	64
Enable REGZA-LINK ...............................................................	64
TV Auto Power ........................................................................	64
Auto Standby ..........................................................................	64
Amplifier Control ...................................................................	64
Speaker Preference ...............................................................	64
Position Key Pass Through .................................................	64
REGZA-LINK input source selection ................................	64
REGZA-LINK playback device control .............................	65
REGZA-LINK one touch play ..............................................	65
REGZA-LINK system standby .............................................	65
REGZA-LINK system audio control ..................................	65
Toshiba PC compatible with REGZA-LINK ....................	65
TEXT SERVICES
Text services ......................................................................................	66
Selecting modes ....................................................................	66
Text information ....................................................................	66
Navigating pages using Auto ............................................	66
Navigating pages using LIST .............................................	66
Control buttons ......................................................................	67
PROBLEM SOLVING
Questions and Answers ...............................................................	68
INFORMATION
License Information ........................................................................	71
Information ........................................................................................	73
Specifications and accessories ...................................................	76

English

3

English

INSTALLING YOUR TV

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See page 5.

DO be careful with glass panels or doors on equipment.

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.

THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.

Air Circulation

Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.

Heat Damage

Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C (41°F) min. and 35°C (94°F) max.

Mains Supply

The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. Use only the supplied lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance.

In the UK, the fuse fitted in the plug is approved by ASTA or BSI to BS1362. It should only be replaced by a correctly rated and approved type and the fuse cover must be refitted.

IF IN DOUBT, PLEASE CONSULT A COMPETENT ELECTRICIAN.

Do

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do not

DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.

WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all times.

DO NOT use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety, always fit the manufacturer’s approved stand, bracket or legs with the fixings provided according to the instructions.

DO NOT leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, and make sure your family knows how to do this. Special arrangements may need to be made for people with disabilities.

DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.

WARNING – excessive sound pressure from earphones or headphones can cause hearing loss.

ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, or push anything into holes, slots or any other openings in the case.

NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.

4

INSTALLING YOUR TV

Installation and important information

Where to install

Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.

Place the TV on a stable, level surface that can support the weight of the TV. In order to prevent Injury and maintain stability of this apparatus, secure the TV to the level surface using the strap if fitted, or to a wall using a sturdy tie to the P clips provided. Otherwise secure the TV on the level surface using the supplied mounting screw.

Fixing strap

Fixing strap

Sturdy tie (as short as possible)

	The LCD display panels are manufactured using an	Stand clip
	extremely high level of precision technology;
	however, sometimes some parts of the screen may be	‘P’ Clip
	missing picture elements or have luminous spots.
	This is not a sign of a malfunction.	Screw
	Make sure the television is located in a position where	(supplied)
	it cannot be pushed or hit by objects, as pressure will	Stand style is dependent on model
	break or damage the screen. Also, please be certain
	that small items cannot be inserted into slots or
	openings in the case.

Cleaning the screen and cabinet…

Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.

Please take note

The digital reception function of this television is only effective in the countries listed in the “Country” section of the “SETUP” menu. Depending on country/area, some of this television’s functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of other size modes (eg: Super Live) will prevent permanent retention.

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:

i)Fire;

ii)Earthquake;

iii)Accidental damage;

iv)Intentional misuse of the product;

v)Use of the product in improper conditions;

vi)Loss and/or damage caused to the product whilst in the possession of a third party;

vii)Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual;

viii)Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.

NOTE: A Toshiba wall bracket or stand, where available, must be used to maintain the product’s BEAB approval.

English

5

English

INSTALLING YOUR TV

The remote control

Simple at-a-glance reference of your remote control.

	2	1
		4
	3
		5
	6	8
	7
		9

10 11

	13
12	16
15	14
17	18
19	20
21	22
25	23
24	26
	27
	28

1For On/Standby mode

2To select external input sources

3Selectable Picture preferences

4Widescreen viewing

5 sStereo/bilingual transmissions

6To select TV Mode

7To access the analogue or digital Channel List

8To access More Information Menu

9Number buttons

10Switch the Audio Description On/Off

11To return to previous programme position

12To alter the TV volume

13To display on-screen information

To access the index page in Text mode

14To mute the TV sound

15To access Quick Menu

16To change programme positions To change TEXT pages

17To display the digital on-screen Programme Guide

18To exit menus

19 To page up, down, left or right

20When using menus, the arrows move the cursor on the screen up, down, left or right. Press OK to confirm your selection

21On-screen Menus

22To return to previous Menu

23Colour buttons: Text and interactive service control buttons

24To call up text services

25To access Media Player Menu

26Digital Subtitles or Analogue TEXT Subtitle pages if available

	27 When in TV mode:			When in Text mode:
	r		Picture still	A	To reveal concealed
	DAnalogue time			B	text
					To hold a wanted
			display
				C	page
					To enlarge text
					display size
				DTo select a page
					while viewing a
					normal picture
	When using Programme			During Playback:
	Guide:			c	To PLAY
	Z	–24 hours		v	To STOP
	z	+24 hours		W/w To PAUSE/STEP
	CC	–1 page		Z	To SKIP-BACK
	cc	+1 page		CC	To REWIND
				cc	To FAST FORWARD
				z	To SKIP-FORWARD
	28 When using REGZA-LINK:
	1		To turn On/Standby
	AUDIO		To access AUDIO Menu
	SET UP		To access SET UP Menu
	V		To EJECT
	ROOT		To access Root Menu
	CONTENTS To access Contents Menu
	TOP		To access Top Menu
	DVD		To access DVD Menu

Inserting batteries and effective range

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AAA, IEC R03 1.5V.

Do not combine a used, old battery with a new one or mix

battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 72 of this manual.

Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing.

6

CONNECTING YOUR TV

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.

ILLUSTRATION SHOWS 42RL853.

HDMI 4 INPUT

		HEADPHONE jack
	Power cord
	FIXING STRAP	VIDEO INPUT (EXT 3)
	COMPONENT VIDEO INPUT
	(EXT 2)
	LAN port	HDMI 1/2/3 INPUTS
		PC/HDMI 3 AUDIO INPUT (shared)
	DIGITAL AUDIO OUTPUT	RGB/PC INPUT
	(OPTICAL)
	SCART (EXT 1)
	Aerial Cable
	Media Recorder

English

Aerial cables:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the aerial to the socket on the rear of the television. If you use a decoder and/or a media recorder, it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.

SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the media recorder IN/OUT socket to the television. Connect the decoder TV socket to the television.

Before running Auto Tuning, put your decoder and media recorder to Standby.

The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.

The Digital Audio Output socket enables the connection of a suitable surround sound system.

NOTE: This output is always active.

HDMI® (High-Definition Multimedia Interface) is for use with a DVD decoder or electrical equipment with digital audio and video output.

For acceptable video or PC signal formats through the HDMI terminals, see page 74.

NOTE: Although this television is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly.

LAN port is used to connect the TV to your home network. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function.

A wide variety of external equipment can be connected to the back of the television; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press oto select between DTV, EXT 1, EXT 2,

EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.

When the external input mode is selected while viewing DTV mode, the SCART socket does not output video/audio signals.

7

English

CONNECTING YOUR TV

Connecting an HDMI® or DVI device to the HDMI input

The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 74.

NOTE:

•Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of a new standard. Please unplug your HDMI cable first and then try setting the

INSTAPORT™ and Enable Content Type options to “Off”. Your early HDMI source should operate properly with your television. See page 63.

•Supported Audio format: Linear PCM, Dolby Digital (AC-3), sampling rate 32/44.1/48kHz.

To connect an HDMI device

Connect an HDMI cable (type A connector) to the HDMI terminal.

For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).

•If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this model.

•HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).

•See “HDMI 3 Audio” on page 62.

the back of your television

To connect a DVI device

Connect an HDMI-to-DVI adaptor cable (HDMI type A connector) to the HDMI 3 terminal and audio cables to the PC/ HDMI 3 (AUDIO) socket (see illustration).

•The recommended HDMI-to-DVI adaptor cable length is 6.6 ft (2m).

•An HDMI-to-DVI adaptor cable transfers video only. Separate analogue audio cables are required.

•See “HDMI 3 Audio” on page 62.

the back of your television

Audio cable for HDMI to television connection (not supplied)

HDMI-to- DVI adaptor Cable

DVI device

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:

•When turning on your electronic components, turn on the television first, and then the HDMI or DVI device.

•When turning off your electronic components, turn off the HDMI or DVI device first, and then the television.

		HDMI’s ARC (Audio Return Channel)
		feature
		This feature enables the audio signal of the TV to be sent to
		the AV amplifier via the HDMI cable. It will not be necessary to
		connect a cable from the audio output of the TV to the audio
		input of the AV amplifier to reproduce the audio received
		from the tuner of the TV through the AV amplifier.
	HDMI cable	the back of your television
HDMI device		AV amplifier that supports ARC

To view the HDMI device video, press the obutton to select

HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

HDMI cable

8

CONNECTING YOUR TV

REGZA-LINK connection

You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 64–65.

the back of your television

English

AV amplifier

Playback device

Playback device

For the setup shown above, you will need three HDMI cables.

NOTE:

•If several devices are connected, the REGZA-LINK feature may not operate properly.

•For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ).

•This function is available when one PC and one AV amplifier are connected separately. However, it may not operate properly if the PC is connected via the AV amplifier.

Before controlling the device(s):

•After completing the above connections, set the REGZALINK Setup menu as you desire (see page 64).

•The connected devices must also be set. For details, see the operation manual for each device.

•The REGZA-LINK feature uses CEC technology as regulated by the HDMI standard.

•This feature is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to individual instruction manuals for compatibility information.

9

English

CONNECTING YOUR TV

Connecting a computer

With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers.

•Some PC models may output unique signals that the television may be unable to detect (see page 73).

To connect a PC to the HDMI terminal

When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adaptor cable and an analogue audio cable.

To connect a PC to the RGB/PC terminal

When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable and a PC audio cable for the PC/HDMI 3 (AUDIO) socket. Select PC from the PC/HDMI 3 Audio options in the AV Connection menu located in the SETUP menu.

the back of your television

Mini D-sub

15 pin connector

If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary.

the back of your television

Audio cable for PC to television connection (not supplied)

Computer

Computer

Audio cable for PC to television connection (not supplied)

RGB PC cable (not supplied)

Conversion adaptor if required

(not supplied)

To use a PC, set the monitor output resolution on the PC before connecting it to the television. For acceptable PC signal formats, see page 73.

To display the optimum picture, use the PC setting feature (see page 60).

NOTE:

•The PC audio input terminal on the television is shared with the HDMI 3 analogue audio input terminal (see page 62).

•Some PC models cannot be connected to this television.

•An adaptor is not needed for computers with a compatible mini D-sub15-pin terminal.

•Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

•A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction.

•When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the

SETUP menu.

HDMI-to-DVI adaptor cable

For acceptable PC and video signal formats, see page 74.

NOTE:

•The edges of the images may be hidden.

•If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.

10

CONNECTING YOUR TV

Connecting a home network

The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV.

NOTE:

•If you connect to a shared network outside your home, it is advisable to use a router. Always use DLNA CERTIFIED™ products in private network environments.

•If you use a hub or switch to connect the TV to your home network, you may not be able to use the automatic setup and will have to manually set up the network address. See page 35.

•If you use a router with built-in DHCP functionality, use the automatic setup. Manual setup may not work.

•If you connect the TV and PC directly, use a crossover LAN cable.

To connect the TV to a home network - Wired

the back of your television

Modem (if available)

Router with Hub

[1] [2]

[2] [3]

Server PC

Cable or Phone jack

[2]

To connect the TV to a home network with an internet connection - Wireless

Please refer to “Wireless Setup” section on page 32.

the back of your television

TOSHIBA

Dual Band WLAN

adaptor (not supplied)

Access point (AP)

Wireless LAN router

Modem

Computer

English

[1]Coaxial or telephone cable (depending on your modem type)

[2]Standard LAN cable

[3]Do NOT connect a phone jack directly to the TV’s LAN port.

11

English

CONNECTING YOUR TV

Controls and input connections

A wide variety of external equipment can be connected to the input sockets on the side of the television.

While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.

COMMON INTERFACE

The Common Interface is for a Conditional Access Module (CAM).

Contact a service provider.

The software updating of CI Plus CAM may be automatically executed. At this time, your Recording/Reminder programming will be

canceled.

ILLUSTRATION SHOWS 42RL853.

Control panel

USB port Media Player / Wireless LAN adaptor ready for a

home network

Switching on

If the RED LED is not lit, check that the mains plug is connected to the power supply and press 1on the remote control; it may take a few moments. The GREEN LED will be lit.

Ambient

Light Sensor

ORANGE LED – Programme timer set (digital only)

RED LED – Programme timer Active (digital only)

RED LED – Standby

GREEN LED – Power on

To use the option, press Band bon the remote control to move up and down and press Cor cto select your desired setting. Follow the on-screen instructions. The functions of each menu are described in detail throughout the manual.

To put the television into Standby, press 1on the remote control. To view the television, press 1again. The picture may take a few seconds to appear.

For energy saving:

We recommend that you use the television with the factory settings. The factory settings are for energy saving. Unplugging the mains plug will cut energy use to zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday. Reducing the brightness of the screen will reduce energy use. Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills.

NOTE: Putting the television into standby mode will reduce energy consumption, but will still draw some power.

Using the controls and connections

To alter the volume press – 2+.

To alter the programme position press bpB.

Press MENU and BbcCto control the sound and picture options.

Press MENU to finish.

The Media Player feature provides access to photo, movie and music files stored on a USB storage device that is connected via the USB port or on a network device.

NOTE: The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment.

The USB socket has to be used with the “TOSHIBA Dual Band WLAN Adaptor WLM-10U2” in order to access a wireless network.

Using the remote control

Press MENU on the remote control to display the menu.

The menu appears as a list of five topics. As each symbol is selected by pressing Cor con the remote control, its respective options will appear below.

NOTE: The same menu is displayed in DTV (Digital TV) and ATV (Analogue TV) modes; however, where some items are not available in a mode, they will appear greyed out.

You must use the TOSHIBA Wireless LAN device to ensure correct operation of this feature. This feature is available only when the “TOSHIBA Dual Band WLAN Adaptor“ is used.

To select an external input, press ountil the appropriate input source is selected.

Please always refer to the owner’s manual of the equipment to be connected for full details.

NOTE: Interactive video games that involve shooting a “gun” at an on-screen target may not work with this TV.

12

			SETTING UP YOUR TV
Startup Application	g Press OK, and the AutoView screen will appear, press
Before switching on the television, put your		Cor cto select Yes or No.
decoder and media recorder, if applicable, to		AutoView
Standby. To set up the television, use the buttons		AutoView mode automatically adjusts picture settings
on the remote control as detailed on page 6.		to suit ambient light conditions.
		Do you wish to enable AutoView mode?
			No

Quick Setup

a Press the 1button. The Menu Language screen will appear. This screen will appear the first time that the television is switched on and each time Reset TV is selected.

b Press B, b, C, or cto select the menu language, and then press OK.

c Highlight Country and press C or cto select. The television is now set to tune the stations for your country.

Quick Setup
	Country		UK
	Primary Subtitle Language		English
	Secondary Subtitle Language		English
	Primary Audio Language		English
	Secondary Audio Language		English

NOTE:

•The following display menus will differ slightly according to the country you selected.

•If there is not a country that you want to select in the list, select Others.

d Press OK, and the Location screen will appear.

Location

To use the TV for displaying in a store showroom, please select [Store]. [Home] mode is recommended for normal use.

Home

e Press Cor cto select Home or Store. For normal home use, select Home.

f Press OK. If Store is selected in step 5, a Store mode confirmation window will appear. If you select Yes from that window, the TV will proceed to the Auto Demo setup screen.

h Press OK. If the Ant/Cable screen appears, press Bor bto select Antenna or Cable, and then press OK to check ( ).

Ant/Cable

Antenna

Cable

Next

i Select Next and press OK. The Auto Tuning start up screen will appear with the option to select between DTV and ATV, DTV or ATV if available. Use Cor cto select the appropriate mode.

j Press bor Bto highlight Start Scan, and then press

OK.

The television will start to search for available DTV and/or ATV channels. The progress bar will indicate the scan status.

You must allow the television to complete the search.

Auto Tuning
	Progress				Found
DTV Tune	3%				2
ATV Tune				Waiting...
				Channel: C7

When the search is complete, the television will automatically select position one.

The Auto Tuning screen will display the total number of services found.

NOTE: If there are multiple channels with the same channel number, a confirmation window will appear. Press Cor cto select the one you prefer.

k Press Cor cto view the DTV (digital channel) or ATV (analogue channel) lists.

English

13

English

SETTING UP YOUR TV

l Use bor Bto move through the list to select a channel, and then press OK to view.

In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning.

REMEMBER: Press TV at any time to select between ATV and DTV (DTV TV/DTV Radio/DTV Text if available) modes.

NOTE: The time will be set automatically by transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen.

PLEASE NOTE

The Quick Setup menu can also be accessed at any time from the SETUP menu.

With the exception of DTV Scan Type and DTV Modulation items, all of the following items will have 2 operating modes. The first is Auto where the values for each item are preset by the system. The second is an Input mode where you will be able to enter a single value in place of the pre-set value. If no channel is currently tuned and the Input state is chosen, a system default value will be shown. However, if a channel is currently tuned when the item is accessed, the value of the current channel will be displayed.

DTV Scan Type:

This item determines whether a Quick Scan or a Full Scan will be executed.

The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time.

DTV Start Frequency:

This sets the frequency from which the scan will begin.

Ant/Cable In (if available)

From this menu, you can set the RF input configuration to cable.

a Press MENU, and select SETUP menu.

b Use bto highlight Ant/Cable In and use Cor cto select Antenna or Cable.

NOTE: When you attempt to change the Ant/ Cable In setting, a warning message will appear followed by PIN entry (if PIN has been set) and a prompt for Auto Tuning.

c When Ant/Cable In is set to Cable, the following setting options will be provided in the Auto Tuning screen.

Press Bor bto select an item, and then press Cor c to select your desired option.

Auto Tuning

Tuning Mode			DTV and ATV
		Start Scan
DTV
Scan Type			Quick Scan
Start Frequency			Auto
End Frequency			Auto
Modulation			Auto
Symbol Rate			Auto
Network ID			Auto

DTV End Frequency:

This sets the frequency at which the scan will end.

DTV Modulation:

You can choose from five QAM modulation settings.

DTV Symbol Rate:

This is the baud rate (KS/s) of the scan.

DTV Network ID:

This is the Network ID to be utilized for the scan. This item is greyed out when DTV Scan Type is set to “Full Scan”.

14

SETTING UP YOUR TV

Auto Tuning

NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them.

Auto Tuning will completely re-tune the television and can be used to update the channel list. It is recommended that Auto

Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost.

a Press MENU and use Cor cto select SETUP menu. Use bto highlight Auto Tuning. Press OK.

SETUP

Menu Language	English
Country	UK
Ant/Cable In	Antenna

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

Quick Setup

b A screen will appear warning that previous programmes and settings will be deleted.

Auto Tuning

Previous settings will be lost!

Press EXIT for no change.

Tuning Mode DTV and ATV

Start Scan

Use Cor cto select DTV and ATV, DTV or ATV, if available, then highlight Start Scan and press OK to continue with the Auto Tuning.

NOTE: If you have selected “Others” for the Country field in the SETUP menu, and selected a tuning mode other than “DTV” , choose the optimum ATV broadcasting system (B/G, I, D/K or L).

The television will start to search for all available DTV and/or ATV services.

You must allow the television to complete the search.

When the search is complete, the Auto Tuning screen will display the services found.

c Use bor Bto move through the list to select a channel, and then press OK to view.

ATV Manual Tuning

Tuning

The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System.

Use Cand cto move across the screen and select any of the ATV Manual Tuning options. Then use Bor bto adjust the settings.

ATV Manual Tuning

System

1 I A C 2 0 V C R

1 2 3 4 5 6 7 8 9

1Position

The number to be pressed on the remote control to tune the channel.

2System

Specific to certain areas.

3Colour System

Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.

4Skip

Set Skip to On (8) or Off (() for the selected channel. See page 17.

5Signal Class

The channel classification.

6Channel

The channel number on which a station is being broadcast.

7Search

Search up and down for a signal.

8Manual Fine Tuning

Only used if interference/weak signal is experienced. See page 68.

9Station

Station identification. Use the Bor band Cor cbuttons to enter up to seven characters.

To allocate a position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film in the media recorder, press PLAY, and then manually tune.

English

15

English

SETTING UP YOUR TV

a Press MENU and use Cor cto select the SETUP menu. Press bto highlight ATV Manual Tuning and press OK to select.

SETUP

Menu Language	English
Country	UK
Ant/Cable In	Antenna

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

DTV Settings

Quick Setup

b Use Bor bto highlight the desired position. We suggest Pos. 0 for a media recorder.

ATV Manual Tuning
	Pos.		Channel	Station
	1		C2

2S10

3C7

4S40

5C22

6C25

7C28

8C30

Different Channel numbers may be displayed.

c Press OK to select. If the channel chosen for the media recorder is set to skip, Skip should be removed before storing.

d Press cto select System and use Bor bto change if required.

ATV Manual Tuning

System

1

I

A

C

2

0

e Then press cto select Search.

f Press Bor bto begin the search. The search symbol will flash.

ATV Manual Tuning

Search

1

I

A

C

2

0

g Each signal will show on the television. If it is not your media recorder, press Bor bagain to restart the search.

h When your media recorder signal is found, press cto move along to Station. Use B, b, Cand cto put in the required characters, e.g. VCR.

ATV Manual Tuning

Station

1

I

A

C

2

0

V

C

R

i Press OK to save.

j Repeat for each position you want to tune, or press RETURN to return to the list of channels and select the next number to tune.

k Press EXIT when you have finished.

PLEASE NOTE

This television has direct channel entry if the channel numbers are known.

Select the ATV Manual Tuning screen in Step 3. Enter the Position number, the System, then C for standard (terrestrial) channels or S for cable channels and the Channel number. Press OK to save.

16

SETTING UP YOUR TV

Skip

Sorting positions

To prevent certain channels from being viewed, positions can be skipped.

a Select ATV Manual Tuning from the SETUP menu.

b Use Bor bto highlight the position to be skipped and press OK to select.

ATV Manual Tuning
	Pos.		Channel	Station
	1		C2

2S10

3C7

4		S40	ABC1
5		C22	ABC1

6C25

7C28

8C30

c Press cto select Skip.

d Use Bor bto turn Skip on. Press OK.

8on the screen indicates a skipped position.

ATV Manual Tuning

Skip: On

1 I A C 2 0

e Press RETURN and repeat from Step 2 or press EXIT.

Channels may be moved and saved to the position of your choice.

a Select ATV Manual Tuning from the SETUP menu.

b With the list of channels showing, use Bor bto highlight the channel you want to move and press c.

ATV Manual Tuning
	Pos.	Channel	Station
	2	S10
	3	C7
	4	C40	ABC1
	5	C22	ABC1
	1	C2
	6	C25
	7	C28
	8	C30

c Use Bor bto move through the list to your preferred position. As you do so, the other channels will move to make room.

d Press Cto save your move.

Repeat as necessary, and then press EXIT.

Each position has to be individually selected. To turn Skip off, repeat the procedure for each position.

Skipped positions cannot be selected by PUand Pu or by the controls on the television but can still be accessed by the number buttons on the remote control.

English

17

English

SETTING UP YOUR TV

DTV Manual Tuning

NOTE: This feature varies depending on the Ant/Cable In setting.

Manual Tuning

This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.

a Select DTV Manual Tuning from the SETUP menu and press OK.

DTV Manual Tuning

Signal Strength	WEAK	AVERAGE		STRONG
Quality	GOOD
Channel				13

Start Scan

b Enter the multiplex number using the number buttons or use Cor cto adjust the number up or down.

c Highlight Start Scan, and then press OK. The television will automatically search for that multiplex.

DTV Manual Tuning
			0 New Channels - Total 6
New Pos.			Name		Type
	1		ABC ONE
	2		ABC TWO

7 ABC THREE

40 ABC NEWS 24

51 ABCi

When the multiplex is found, any channels that are not currently in the channel list will be added and the channel information at the top of the screen will be updated.

d Repeat as necessary. Press EXIT to finish.

Manual Tuning for DVB-C

When Ant/Cable In is set to Cable, DTV Manual Tuning items are as follows:

Frequency – input a specific frequency to be scanned

Modulation – choose from one of five QAM modulation options

Symbol Rate – input a specific baud rate (KS/s) to be used for the manual scan

DTV Settings

Channels

The channel order may be changed to suit your personal preference.

a Select DTV Settings from the SETUP menu and press

OK.

b Select Channels and press OK.

DTV Settings

Channels
Subtitle and Audio
PIN Setting
Parental Control
Local Time Setting
Standby Channel Update	Off
DVB Character Set	Standard
Dynamic Scan	On

c For your convenience, you can jump to specific places in the list by one of two methods.

Channels			TV
Line No. 1/10
	Pos.		Name
	1		ABC ONE
	2		ABC TWO
	7		ABC THREE
	30		CABC Channel
	40		ABC NEWS 24
	51		ABCi
	822		AA
	823		AC

Line Number Jump — Use the number buttons

(0-9) to input the line number you want to select, and then press OK.

Name Jump — Press CCor ccto jump to the next station name with a different initial letter.

It is also possible to change the Position number of a particular channel.

Renumber — Press the RED button to renumber the highlighted channel. Edit the channel number using the number buttons and press OK. If the position number you input already exists, a confirmation window will appear.

		Pos.			Name
	-	-	-	-	ABC ONE

18

SETTING UP YOUR TV

Move — Press the GREEN button to activate the Move feature. Use the Bor bbuttons to select the channel you wish to move and press OK to check.

If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary.

Once all desired channels have been checked, use the Bor bbuttons to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.

Channels		TV
Line No. 1/10
Pos.		Name
1		ABC ONE

2	ABC TWO
7	ABC THREE

30	CABC Channel

40	ABC NEWS 24

51

ABCi

822

AA

823

AC

DVB Character Set

This feature allows you to manually select the character set (Standard = Table 0, West = Table 5 or Latin alphabet 9) to be used for DVB-C or DVB-T channels.

a Select DTV Settings from the SETUP menu and press

OK.

b Press bto select DVB Character Set and use Cor c to select Standard, West or Latin alphabet 9.

Dynamic Scan

If the broadcast information has changed in your DVB-T receiving area, the TV screen will display the message “Broadcast information has changed. Would you like to rescan now?”. Please follow the message. If you do not wish for the TV to detect changes and prompt you to rescan, you should set this feature to “Off”.

a Select DTV Settings from the SETUP menu and press

OK.

Sort — Press the YELLOW button. A confirmation window will appear. Press Cor cto select Yes and press OK.

Sort

Your existing channel order will be lost. Do you wish to continue?

Yes

The Sorting Type selection window will appear.

Sort

Sorting Type

Number

Sort

Press Cor cto set the sorting type.

A-Z Sort Station name order (A to Z)

Number Position No. order (numerical sequence)

Press bto highlight Sort and press OK.

Standby Channel Update

If the Standby Channel Update is set to On, when the TV is in standby mode, Digital Tuning is automatically executed and any new channels are saved.

a Select DTV Settings from the SETUP menu and press

OK.

b Press bto select Standby Channel Update and use

Cor cto select On.

b Press bto select Dynamic Scan and use Cor cto select On.

Location setting

You can select either Home or Store mode. Home is recommended for normal home use. Select Store when using the television for displaying in a shop, etc.

a Select Location from the SETUP menu.

b Press Cor cto select Home or Store.

Analogue switch-off

This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.

This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption.

English

19

English

CONTROLS AND FEATURES

General controls

Quick Menu

Quick Menu helps you access some options quickly, such as

Picture Mode, Picture Size, More Information, Sleep Timer etc.

Press QUICK to display the Quick Menu and use Bor bto select the option.

Mode	Quick menu item	Description
Photo Frame	PICTURE	See page 25.
	Picture Size	See page 23.

Selecting positions

To select a position, use the numbered buttons on the remote control.

Positions can also be selected using PUand Pu.

Quick Menu

Picture Mode		AutoView
Picture Size		Super Live
More Information
Channel Options
BBC iPlayer
YouTube
Media Player
Photo Frame
Sleep Timer	00:00
Speakers		TV Speakers
Headphone Level	50
Wireless Information

NOTE: Quick Menu items are different depending on the current mode.

Quick menu item example

	Mode	Quick menu item	Description
	When viewing a TV	Picture Mode	See page 25.
	programme or
		Picture Size	See page 23.
	pictures from the
	external input	More Information	See page 54.
		Channel Options	See page 56.
		BBC iPlayer	See page 39.
		YouTube	See page 39.
		Media Player	See page 42.
		Photo Frame	See page 49.
		Sleep Timer	See page 52.
		Speakers	See page 64.
		Headphone Level	See page 22.
		Wireless Information	See page 34.
	When using EPG	Genre Colour	See page 55.
		EPG Update/	See page 54.
		Cancel EPG Update
	Media Player (Multi	Sort	See page 45.
	View, List View)
		Interval Time	See page 45.
		Repeat	See page 45.
		Device Information	See page 45.
		Wireless Information	See page 34.

To display on-screen information such as position, input mode or stereo/mono signal, press . Press again to cancel.

The Time Display – analogue only

The time display facility allows the current (text service) time to be seen on the television screen.

Press Dwhilst watching a normal television broadcast to see the time display from the broadcaster. It will remain on screen for about 5 seconds.

NOTE: This display may not be available in some cases.

Stereo and Bilingual transmissions

For ATV programmes

If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear.

Stereo… Press sto select Stereo or Mono.

Bilingual… Bilingual transmissions are rare. If they are transmitted, the word Dual will be displayed. Choose the required programme number, and if the word Dual appears, press sto select Dual 1, Dual 2 or Mono.

For DTV programmes

For stereo or dual mono broadcasts, press sand use Cor cto select settings.

Mode Display	Pressing c
Stereo	Stereo SLeft SRight
Dual mono	Dual 1 SDual 2
Mono	–
Multichannel	–

For multi-audio track broadcasts, press srepeatedly to change the audio language (see “Audio language” on page 57).

20

CONTROLS AND FEATURES

Sound controls

Volume controls and mute sound

Volume

Press yor Yto adjust the volume.

Sound Mute

Press once to turn the sound off and again to cancel.

Surround Settings

Stereo Extension and Voice Enhancement help to create an enhanced surround sound experience. Your TV’s audio will sound fuller, richer, and wider.

a In the SOUND menu, press bto highlight Advanced Sound Settings, and then press OK.

b Press bto highlight Stereo Extension, and then press Cor cto select On.

Dual

If a programme or film is being broadcast with a soundtrack in more than one language, the DUAL feature allows selection between them.

a Press MENU and Cor cto select the SOUND menu.

b Press bto highlight Dual, and then press Cor cto choose between Dual 1 or Dual 2.

	SOUND
	Dual		Dual 1
	Balance	0
	Advanced Sound Settings
	Dolby Volume		Low
	Dynamic Range Control		Off
	Audio Level Offset
	Audio Description

Balance, Bass and Treble

The sound controls are accessible in digital and analogue modes.

a Select the SOUND menu.

b Press bto highlight Balance, and then press Cor c to emphasize left or right speaker balance.

	Advanced Sound Settings
	Bass	0
	Treble	0
	Stereo Extension		On
	Voice Enhancement		On

c Press bto highlight Voice Enhancement, and then press Cor cto select On.

Dolby Volume®

This feature provides a consistent sound volume regardless of programmes, channels or input sources.

a In the SOUND menu, press bto highlight Dolby Volume.

b Press Cor cto select Low, High or Off.

NOTE:

•The Dolby Volume setting influences the Dynamic Range Control and Digital Audio Output settings.

•If Dynamic Range Control is set to On, this feature will be disabled.

Dynamic Range Control

This feature allows control of audio compression for some digital TV programmes (MPEG-1 and MPEG-2 audio programmes are not supported).

To adjust Bass and Treble

a In the SOUND menu, press bto highlight Advanced Sound Settings, and then press OK.

b Press bto highlight Bass or Treble, and then press C or cto adjust the settings.

a In the SOUND menu, press bto highlight Dynamic Range Control.

b Press Cor cto select On or Off.

NOTE: This feature is disabled when Dolby Volume is set to

Low or High.

English

21

English

CONTROLS AND FEATURES

Audio Level Offset

Sometimes there can be large changes in volume when switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an external input. Using the Audio Level Offset feature reduces these volume differences.

a Set the volume level usually used when watching a DTV 5.1ch programme.

b Tune to a channel which is DTV 2ch, ATV or an external input.

c In the SOUND menu, press bto highlight Audio Level Offset and press OK.

d Press bto highlight an option, and then use Cor c to adjust the volume level.

Audio Level Offset

DTV 2ch	-5
ATV	0
External Input	0

NOTE:

•The available item changes depending on the current input source. For example, while watching a DTV 2ch programme, only DTV 2ch is available and the other two items are greyed out in the menu. This allows you to easily adjust according to each condition.

•When watching a DTV 5.1ch programme, this feature is not available.

Headphone Settings

This setting is used to set the sound output when headphones are connected.

Speaker	Headphone	Speakers
Link
On	Sound is output	No sound
	(2– + is available.)
Off	Sound is output	Sound is output
	(Headphone level	(2– + is available.)
	menu is available.)

a In the SOUND menu, press bto highlight

Headphone Settings, and then press OK.

b Press bto highlight Speaker Link and use Cor cto select On or Off.

c If you select Off, then highlight Headphone Level and use Cor cto adjust the headphone sound.

Headphone Settings

Speaker Link			Off
Headphone Level		50

Audio Description

Audio Description is an additional narrative sound track for visually impaired individuals to understand and enjoy the story line more fully. The letters AD will be displayed in the channel banner when programmes contain AD content. You can choose to hear sound from the TV speakers and the headphone output or only from the headphone output.

a In the SOUND menu, select Audio Description and press OK.

b Highlight Audio Description, and then press Cor c to select On.

Audio Description

Audio Description		On
Mixing Level	80
Speaker Out		Off

The AD button on the Remote can also be used to toggle the Audio Description feature between On and Off.

c To adjust the level of the audio description sound to

the main sound, highlight Mixing Level and use Cor c.

d Highlight Speaker Out, and then press Cor cto select On or Off.

On: sound from both the headphone output and speakers.

Off: sound from the headphone output.

See “Headphone Settings” to adjust the headphone sound.

NOTE: This feature also applies to the sound from the DIGITAL AUDIO output and FIXED AUDIO output.

22

CONTROLS AND FEATURES

Widescreen viewing

Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.

Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when

WIDE available). Due to the range of widescreen formats (16:9, 14:9, 20:9

etc.) black bars may be visible on the top and bottom of the screen.

4:3

Use

this

setting

to

view

a

true

4:3

broadcast.

SUPER LIVE

CINEMA

This setting will enlarge a 4:3 image to fit the screen by stretching the image horizontally and vertically, holding better proportions at the centre of the image. Some distortion may occur.

English

When watching ‘all sides panel format’ films/video tapes, this setting will eliminate or reduce the black bars at all sides of the screen by zooming in and selecting the image without distortion.

When subtitles are included on a

SUBTITLE letterbox format broadcast, this setting will raise the picture to ensure

that all the text is displayed.

	14:9		Use	this	setting	when	watching	a
					14:9	broadcast.

SUBTITLE

23