32BV500B
OWNER’S MANUAL
Contents |
|
Safety Precautions...................................... |
3 |
Air Circulation ......................................... |
3 |
Heat Damage.......................................... |
3 |
Mains Supply .......................................... |
3 |
Warning ................................................ |
3 |
Do ......................................................... |
3 |
Do not.................................................... |
3 |
Installation and Important Information ........ |
4 |
EXCLUSION CLAUSE................................ |
4 |
Digital Switchover....................................... |
5 |
Inserting Batteries and Effective Range of |
|
the Remote Control ................................. |
6 |
To Connect an HDMI Device..................... |
8 |
To Connect a DVI Device ......................... |
8 |
To Connect a Computer ........................... |
9 |
To Connect a USB Disk ............................ |
9 |
USB Memory Connection ......................... |
9 |
Environmental Information ................... |
10 |
Using the Cable Holder .......................... |
10 |
Switching on......................................... |
11 |
Using the Remote Control ...................... |
11 |
Using the Controls and Connections on the |
|
TV........................................................ |
11 |
Auto Tuning .......................................... |
12 |
Digital Manual Tuning ............................ |
13 |
Analogue Manual Tuning........................ |
13 |
APS (Automatic Programming System).... |
14 |
Sorting Programme Positions - Analogue. 14 |
|
Stereo and Bilingual Transmissions ......... |
15 |
Viewing Channel List ............................. |
15 |
Moving a Channel ................................. |
15 |
Deleting a Channel................................ |
15 |
Renaming a Channel ............................. |
16 |
Locking a Channel................................. |
16 |
Viewing Info Banner.............................. |
16 |
Electronic Programme Guide .................. |
16 |
Programme Searching ........................... |
17 |
Displaying Subtitles ............................... |
17 |
Language Settings................................. |
17 |
Preferred........................................... |
17 |
Current ............................................. |
17 |
Viewing Parental Control Menu............... |
18 |
Menu Lock............................................ |
18 |
Set PIN ................................................ |
18 |
Viewing Configuration Menu................... |
19 |
Hard of Hearing (* for EU countries only) 19 |
|
Controlling Favourite Mode .................... |
19 |
Channel List Mode................................. |
19 |
Scan Encrypted .................................... |
19 |
|
English |
Receiver Upgrade.................................. |
19 |
Note on Analogue switch-off .................. |
19 |
Audio Description (optional)................... |
20 |
Standby Search (*) ............................... |
20 |
Viewing Main Menu ............................... |
20 |
Selecting Programme Positions............... |
20 |
Input Selection ..................................... |
20 |
Controlling Volume and Muting Sound .... |
21 |
Equalizer Settings.................................. |
21 |
Balance ................................................ |
21 |
Headphone Volume ............................... |
21 |
Sound Mode ........................................ |
21 |
AVL...................................................... |
21 |
Picture Mode......................................... |
22 |
Picture Adjustments .............................. |
22 |
Colour Temperature............................... |
22 |
Noise Reduction .................................... |
22 |
Game Mode .......................................... |
22 |
Picture Zoom ........................................ |
22 |
Resetting Picture Settings ...................... |
22 |
Changing Picture Format ....................... |
23 |
Child Lock............................................. |
24 |
Default Zoom........................................ |
24 |
Blue Background................................... |
24 |
Menu Background ................................. |
24 |
Menu Timeout ...................................... |
24 |
HDMI PC Full Mode (optional) ................ |
24 |
Full Mode (optional) .............................. |
24 |
Ext Out................................................. |
24 |
Backlight .............................................. |
24 |
Programme Timers - Digital Only............ |
25 |
Sleep Timer - Analogue ......................... |
25 |
Conditional Access ................................ |
25 |
Manual Start ......................................... |
26 |
Auto Start............................................. |
26 |
Playing MP3 Files .................................. |
26 |
Viewing JPG Files .................................. |
26 |
Slideshow Feature ................................. |
27 |
To Close the Media Player ...................... |
27 |
Autoposition ......................................... |
28 |
H Position............................................. |
28 |
V Position ............................................. |
28 |
Dot Clock.............................................. |
28 |
Phase................................................... |
28 |
Dot Clock .......................................... |
28 |
PC Picture controls ................................ |
28 |
Digital Text and Interactive Services ....... |
29 |
Using Digital Interactive Services............ |
29 |
Analogue Text Services (if available)....... |
29 |
- 1 - |
|
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 1 |
30.03.2011 14:31:20 |
|
|
|
Using Text Button.................................. |
29 |
Acessing Sub-Pages............................... |
29 |
Revealing Concealed Text ...................... |
29 |
Holding a Page..................................... |
29 |
Enlarging the Text Display Size............... |
29 |
Appendix A: PC Input Typical Display Modes30 |
|
PIN Information ................................... |
30 |
Appendix B: AV and HDMI Signal |
|
Compatibility (Input Signal Types) ............. |
31 |
Appendix C: Supported File Formats for USB |
|
Mode....................................................... |
32 |
Specifications and Accessories................... |
33 |
License Information.................................. |
34 |
English - 2 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 2 |
30.03.2011 14:31:21 |
|
|
|
Safety Precautions
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Air Circulation
Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity, or locations where the temperature is likely to fall below 5°C (41°F).
Mains Supply
The set should be operated only from a 220-240 V AC 50 Hz outlet. DO ensure that the television is not standing on the mains lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance. In the UK, the fuse fitted in this plug is approved by ASTA or BSI to BS1362. It should only be replaced by a correctly rated and approved type and the fuse cover must be refitted. IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN.
Warning
To prevent the spread of fire, keep candles or other open flames away from
this product at all times.
Do
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
Do not
DON’T remove any fixed cover as this may expose dangerous voltages.
DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.
DON’T allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.
DON’T place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.
DON’T use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety, always fit the manufacturers’ approved stand, bracket or legs with the fixings provided according to the instructions.
DON’T leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, make sure your family know how to do this. Special arrangements may need to be made for people with disabilities.
DON’T continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.
WARNING - excessive sound pressure from earphones or headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case.
NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry.
THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.
English - 3 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 3 |
30.03.2011 14:31:22 |
|
|
|
Installation and Important Information
Where to install
P Clip |
Sturdy tie
(as short
as possible)
Fixing |
Strap |
Fixing |
Strap |
''P' Clip position on TV is dependent on model
* Button and stand style is dependent on model.
Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.
Place the TV on a stable, level surface that can support the weight of the TV. In order to maintain stability and prevent it falling over, secure the TV to a wall using a sturdy tie to the clip on the back of the TV.
The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing picture elements or
have luminous spots. This is not a sign of a malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section of the “SETUP” menu. Depending on country/area, some of this television’s functions may not be available.
Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer
displays, video games, on screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty.
Regular use of other size modes will prevent permanent retention.
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i)fire;
ii)earthquake;
iii)accidental damage;
iv)intentional misuse of the product;
v)use of the product in improper conditions;
vi)loss and/or damage caused to the product whilst in the possession of a third party;
vii)any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual;
viii)any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.
Note: A Toshiba wall bracket or stand, where available, must be used.
English - 4 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 4 |
30.03.2011 14:31:22 |
|
|
|
Digital Switchover
8IFO EPFT TXJUDIPWFS IBQQFO
$PQFMBOE TXJUDIFT PO 0DUPCFS
5IF FYBDU EBUF ZPV TXJUDI EFQFOET PO UIF USBOTNJUUFS ZPV BSF TFSWFE CZ 5P DIFDL XIFO ZPV TXJUDI HP UP %JHJUBM 6,µT QPTUDPEF DIFDLFS PO XXX EJHJUBMVL DP VL
$IFDL ZPVS *57 OFXT TFSWJDF PS MPPL BU 5FMFUFYU QBHF UP TFF XIBU 57 SFHJPO ZPVµSF JO
Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region.
Please see above to find out when your area switches to digital. Digital UK is the independent, non-profit organisation leading the process of digital TV switchover in the UK.
Digital UK provides impartial information on what people need to do to prepare for the move to digital, and when they need to do it.
How the switchover affects your TV equipment:
Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by simply plugging it into your aerial socket (check if you can get digital TV through your aerial now, or whether you’ll have to wait until switchover, at www.digitaluk. co.uk).
When the TV switchover happens in your area, there are at least two occasions when you will need to re-tune your TV in order to continue receiving your existing TV channels, and also to pick up new ones,
Digital UK, the body leading the digital TV switchover, will advise you when you need to re-tune during the switchover.
If you choose to connect your TV to satellite or cable with a digital box then it will not be affected by
English - 5 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 5 |
30.03.2011 14:31:23 |
|
|
|
The Remote Control
Simple at-a-glance reference of your remote control.
Mono-Stereo / Dual I-II |
|
|
|
|
|
|
|
|
|
Standby mode |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
Subtitle on/off |
||
Image size |
|
|
|
|
|
|
|
|
|
No function |
|
SCREEN |
|
LANG |
|
SUBTTL |
|
PIP |
|
||||
Expand (in TXT mode) |
|
|
|
|
|
|
|
|
|
|
|
Digital Services |
No function |
Green button
Teletext / Mix / PAT
Return / Exit menu
Navigation buttons Programme guide
Current language selection
1 2 3
4 |
5 |
6 |
To select TV |
|
|
|
|
7 |
8 |
9 |
programme number |
|
|||
|
0 |
|
To return to |
|
|
the previous programme |
|
BACK |
|
MENU |
Menu on/off |
|
|
||
|
OK |
|
OK / Confirm |
|
|
Freeze picture (in analoge TV mode) |
|
EPG |
|
FAV |
Hold (in TXT mode) |
|
Favourite mode |
Info
Reveal (in TXT mode) AV / Source
SOURCE |
INFO |
PRESETS |
SLEEP |
? |
Picture mode selection
Display sleep timer
V 
- V +
To change channels |
- P |
+ |
|
|
To alter the volume
To mute the sound
TOSHIBA
RC-3910
Inserting Batteries and Effective Range of the Remote Control
- |
+ |
|
- |
||
+ |
||
|
Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in a designated disposal area.
Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced the batteries may need replacing.
English - 6 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 6 |
30.03.2011 14:31:23 |
|
|
|
Connecting External Equipment
Before connecting any external equipment, turn off the On/Off switch and remove the mains plug from the wall socket.
|
COMMON INTERFACE |
|
The Common Interface is |
|
for a Conditional Access |
|
Module (CAM). |
Cable Holder Input |
Component Video |
Inputs (YPbPr) |
USB Input |
Side Video Input |
|
PC/YPbPr/AV |
|
Audio Inputs |
|
Headphone |
Aerial |
On/Off Switch |
|
|
Input |
|
HDMI Input 
Sockets
Coaxial Digital |
SPDIF |
Audio Output |
|
|
Coax.OUT |
PC VGA |
|
Input |
|
HDMI 2 |
HDMI 1 |
VGA |
|
SCART
Scart
Socket
Aerial cable:...........................................................
Connect the aerial to the socket on the rear of the television.
SCART lead:..........................................................
If you use a decoder* or a media recorder, it is essential that the scart cable is connected to the television.
Before running first time installation, any connected devices to standy mode.
The phono sockets located on the side of the TV will accept L and R audio signals.
The Coaxial Audio Output socket enables the connection of a suitable surround sound system.
NOTE: This output is always active.
* a decoder
could be Digital 
Satellite, Free to 
Air or any other 
compatible decoder.
decoder*
TV
HDMI® (High-Definition Multimedia Interface) is for using with a DVD decoder or other equipment with digital audio and video output. It is designed for best performance with 1080i and 1080p high-definition video signals but will also accept and display VGA, 480i, 480p, 576i, 576p and 720p signals. PC format signals will also be displayed.
NOTE: Although this television is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly.
A wide variety of external equipment can be connected to the television; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions.
If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press SOURCE button to switch between sources.
IMPORTANT: Please do not connect a device to PC socket while using YPbPr input.
English - 7 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 7 |
30.03.2011 14:31:23 |
|
|
|
Connecting an HDMI® or DVI Device to the HDMI Input
The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
NOTE:
•Some early HDMI equipment may not work properly with your latest HDMI TV.
•Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
To Connect an HDMI Device
Connect an HDMI cable (type A connector) to the HDMI terminal. For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo (
).
•If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this mode.
•HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).
•To view the HDMI device video, press the SOURCE button to select HDMI 1 or HDMI 2.
To Connect a DVI Device
Connect an HDMI-to-DVI adaptor cable (HDMI type A connector) to the HDMI terminal and audio cables to the PC/Side AV/YPbPr sockets (see illustration).
•The recommended HDMI-to-DVI adaptor cable length is 6.6 ft (2m).
•An HDMI-to-DVI adaptor cable transfers video only. Separate analogue audio cables are required.
2 |
1 |
HDMI Input |
|
HDMI |
HDMI |
||
Sockets |
|||
|
|
HDMI to DVI Adapter Cable (not supplied)
Audio cable for HDMI to television connection
(not supplied)
HDMI 2 |
HDMI 1 |
HDMI Input
Sockets
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:
•When turning on your electronic components, turn on the television first, and then the HDMI or DVI device.
•When turning off your electronic components, turn off the HDMI or DVI device first, and then the television.
HDMI device
English - 8 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 8 |
30.03.2011 14:31:24 |
|
|
|
Connecting a |
Connecting a USB |
Computer |
Disk |
To Connect a Computer
With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers.
When connecting a PC to the RGB/PC terminal on thetelevision, use an analogue RGB (15-pin) computer cable anda PC audio cable for the AUDIO socket.
Audio cable for PC to television connection
(not supplied)
RGB PC Cable (not supplied)
To use a PC, set the monitor output resolution on the PC before connecting it to the television. To display the optimum picture, use the PC setting feature.
NOTE:
•The PC audio input terminal on the television is shared with the YPbPr and Side AV input terminal.
•Some PC models cannot be connected to this television. An adaptor is not needed for computers with a compatible mini D-sub15-pin terminal.
•Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multiangle scenes.
To Connect a USB Disk
•You can connect a USB disk to your TV by using the USB input of the TV. This feature allows you to display/play music or photo files stored in a USB stick.
•It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
•You may back up your files before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any file damage or data loss.
•The TV supports only FAT32 disk formatting. NTFS format is not supported. If you connect a USB disk with NTFS format, “usb is unformatted” osd will be displayed.
•Do not pull out USB module while playing a file.
CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation. Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player
and especially the USB device itself.
USB Memory Connection
• Plug your USB device to the USB input of the TV.
IMPORTANT: The TV supports only FAT32 disk formatting. NTFS format is not supported.
SIDE VIEW USB MEMORY
•Connectivity is not guaranteed for all devices.
•Connect the USB device to the TV directly.
•Do not use a USB hub.
English - 9 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 9 |
30.03.2011 14:31:27 |
|
|
|
Power Save Mode and Cable Holder
Environmental Information
•This television is designed to consume less energy to save environment.
•You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feature of this TV. To reduce energy consumption, you should take the following steps:
•You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level.
Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.
•When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce energy consumption.
•Disconnect power when going away for longer time.
•Note that annually, using the TV set in Power Save Mode has more power efficiency than disconnecting the TV from the mains plug instead of keeping stand-by mode. Therefore disconnect the TV from the mains plug to save energy when you do not use. However it is highly recommended to activate Power Save Mode setting to reduce your annual power consumption.
•Please helps us to save environment by following these steps.
Repair Information
Please refer all servicing to qualified personnel. Only qualified personnel must repair the TV. Please contact your local dealer, where you have purchased this TV for further information.
Using the Cable Holder
You can use the supplied cable holder as the following:
•Place the cable holder into the cable holder hole located on the rear side of the TV as illustrated above.
•Place cables into the cable holder after all necessary connections are made.
English - 10 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 10 |
30.03.2011 14:31:30 |
|
|
|
Controlling the TV
A wide variety of external equipment can be connected via the sockets located on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the right side of the television may be used for some functions.
On/Off
Switch
Standby LED
Menu OSD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Volume |
Programme |
AV/ Standby |
||||||||||||
Down/Up |
Down/Up |
Source |
|||||||||||||
Switching on
If the standby LED is unlit, check that the mains plug is con-
nected to the power and press the 
button on the left side of the television to switch the television on. Then the LED
lights up white. If the picture does not appear, press 
on the remote control; it may take a few moments.
To put the television into Standby, press 
on the remote
control. To view the television, press 
again. The picture may take a few seconds to appear. Note: The active Standby LED may appear for a few moments when the TV is switched off.
Note: A beeping sound will be heard when the buttons are pressed. This is normal operation, not a fault.
For energy saving:
Turning the television off at its mains supply, or un-plugging it, will cut energy use to nearly zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use. Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills.
NOTE: Putting the television into standby mode, will reduce energy consumption, but will still draw some power.
Using the Remote Control
Press the MENU button on the remote control to see the menus.
In analogue TV mode the menu appears as a group of icons each for a menu option. Press the Left or Right button to select a topic.
In digital TV mode the menu appears as a list. Press the Up or Down button to select a topic.
To use the options press the Up and Down buttons on the remote control to move up and down through them and OK, Left or Right buttons to select the required choice. Follow the on screen instructions. The functions of each menu are described in detail throughout the manual.
Using the Controls and Connections on the TV
Using the control buttons on the front of the TV:
•To alter the volume press + 
-.
•To alter the programme position press - P/CH + on the right side of the TV.
•Press + 
- buttons at the same to view main menu and use - P/CH + to navigate and + 
- to change value.
NOTE: The USB socket has limited functionality, and Toshiba can take no responsibility for damage to other connected equipment.
To select an external input, press SOURCE until the appropriate input source is selected.
Please always refer to the owner’s manual of the equipment to be connected for full details.
English - 11 -
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_ |
10068433.indd 11 |
30.03.2011 14:31:31 |
|
|
|
Loading...