Toshiba 32AF44, 35AF44 User Manual

0 (0)

OWNER’S MANUAL

Color Television

®

32AF44

35AF44

 

 

 

 

 

 

NSU

 

 

 

 

 

 

 

 

 

O

ME

 

 

 

 

 

 

 

C

 

 

R

P

 

 

A

 

 

 

 

 

 

 

C

 

 

 

 

 

 

 

R

 

 

I

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

D

 

M

E

 

 

 

 

 

 

 

 

O

A

 

 

 

 

 

 

 

 

U

 

 

 

 

 

 

 

 

 

T

A

 

 

 

 

 

 

 

 

 

 

C

 

 

 

 

 

 

 

 

 

 

S

B

 

 

 

 

 

 

 

 

 

 

,

I

 

 

 

 

 

 

 

 

 

 

L

H

 

 

 

 

 

 

 

 

 

 

S

 

 

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

 

 

L

O

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

 

 

 

C

T

 

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

 

 

I

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

9

 

 

4

 

 

 

 

 

 

A

 

 

 

0

1

 

 

 

.

 

 

 

 

 

0

 

 

o

 

 

 

 

 

 

 

 

 

FILEN

 

 

 

Owner’s Record

The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.

Model number:

Serial number:

© 2004 TOSHIBA CORPORATION

23566350

All Rights Reserved

Introduction

your TV

Connecting

 

 

 

 

RemoteControl

Usingthe

 

 

 

 

your TV

Settingup

 

 

 

 

Features

Usingthe TV’s

 

 

Appendix

Index

Dear Customer,

Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV.

Before operating the TV, please read this manual completely, and keep it nearby for future reference.

Safety Precautions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning symbol in the triangle tells you that the voltage inside this product may be strong enough to cause an electric shock. DO NOT TRY TO SERVICE THIS PRODUCT YOURSELF.

The exclamation mark in the triangle tells you that important operating and maintenance instructions follow this symbol.

NOTE TO CATV INSTALLERS IN THE USA

This is a reminder to call the CATV system installer’s attention to Article 820-40 of the NEC, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. For additional antenna grounding information, see items 25

and 26 on page 4.

NOTICE OF POSSIBLE TV STAND INSTABILITY

DANGER: RISK OF SERIOUS PERSONAL INJURY OR DEATH! Use this TV with the TOSHIBA TV stand recommended in the “Specifications” section only.

Use with other stands may result in instability, causing possible injury or death.

NOTICE OF POSSIBLE ADVERSE EFFECTS

ON TV PICTURE TUBE

If a fixed (non-moving) pattern remains on the TV screen for long periods of time, the image can become permanently engrained in the picture tube. This type of damage is NOT COVERED BY YOUR WARRANTY. See item 33 on page 4.

ENERGY STAR® qualified TV. Products that earn the ENERGY STAR prevent green house gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy. ENERGY STAR and the ENERGY STAR

mark are registered U.S. marks.

0104

Child Safety

It Makes A Difference

Where Your TV Stands

Congratulations on your purchase! As you enjoy your new TV, keep these safety tips in mind:

The Issue

If you are like most consumers, you have a TV in your home. Many homes, in fact, have more than one TV.

The home theater entertainment experience is a growing trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands.

Sometimes TVs are improperly secured or inappropriately situated on dressers, bookcases, shelves, desks, audio speakers, chests, or carts. As a result, TVs may fall over, causing unnecessary injury.

Cares!

consumer electronics industry committed to making home entertainment enjoyable and safe.The Consumer Electronics

Association formed the Home Entertainment Support Safety Committee, comprised of TV and consumer electronics furniture manufacturers, to advocate children’s safety and educate consumers and their families about television safety.

Into Safety

does NOT fit all! Use appropriate enough to support the weight of your

TV (and other electronic components).

Use appropriate angle braces, straps, and anchors to secure your furniture to the wall (but never screw anything directly into the TV).

Carefully read and understand the other enclosed instructions for proper use of this product.

Do not allow children to climb on or play with furniture and TVs.

Avoid placing any item on top of your TV (such as a VCR, remote control, or toy) that a curious child may reach for.

Remember that children can become excited while watching a program and can potentially push or pull a TV over.

Share our safety message about this hidden hazard of the home with your family and friends. Thank you!

2500 Wilson Blvd. Arlington, VA 22201 U.S.A.

Tel. 703-907-7600 Fax 703-907-7690 www.CE.org

CEA is the Sponsor, Producer and Manager of the International CES®

2

Toshiba 32AF44, 35AF44 User Manual
QUALIFIED
SERVICE
TECHNICIAN
Wide plug

Important Safety Instructions

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with a dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician

for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where it exits the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods

of time.

14)Refer all servicing to qualified service personnel.

Servicing is required when the apparatus damaged in any way, such as power cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

15)CAUTION: To reduce the risk of electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless the blades can be inserted completely to prevent blade exposure.

Installation, Care, and Service

Installation

Follow these recommendations and precautions and heed all warnings when installing your TV:

16)Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user’s authority to operate this equipment under the rules of the Federal Communications Commission.

17)DANGER: RISK OF SERIOUS PERSONAL

INJURY, DEATH, OR EQUIPMENT DAMAGE! Never place the TV on

an unstable cart, stand, or table. The TV may fall, causing serious personal injury, death, or serious damage to the TV.

18) Never place or store the TV in direct sunlight; hot, humid areas; areas subject to excessive dust or vibration; or locations with temperatures at or below 41°F (5°C).

19)Always place the TV on the floor

or a sturdy, level, stable surface that can support the weight of the unit.

20)Never place items such as vases, aquariums, or candles on top of the TV.

21)Never block or cover the slots or openings in the TV cabinet back, bottom, and sides. Never place the TV:

on a bed, sofa, rug, or similar surface;

too close to drapes, curtains, or walls; or

in a confined space such as a bookcase, built-in cabinet, or any other place with poor ventilation.

The slots and openings are provided to protect the TV from overheating and to help maintain reliable operation of the TV.

22)Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse.

23)Never overload wall outlets and extension cords.

0303

3

24)Always operate this equipment from a 120 VAC, 60 Hz power source only.

25)Always make sure the antenna system is properly grounded to provide adequate protection against voltage surges and built-up static charges (see Section 810 of the National Electric Code).

26)DANGER: RISK OF SERIOUS PERSONAL INJURY OR DEATH!

• Use extreme care to make sure you are never in a position where your body (or any item you are in contact with, such as a ladder or screwdriver) can accidentally touch overhead power lines. Never locate the antenna near overhead power lines or other electrical circuits.

• Never attempt to install any of the following during lightning activity:

a) an antenna system; or b) cables, wires, or any home theater component connected to an antenna or phone system.

Care

For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions:

27)Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture can appear dull if you sit too far to the left or right of the TV, or if sunlight or room lights reflect on the screen. Turn the TV off to check for reflections on the screen, and then remove the source of reflections while viewing the TV.

28)Always unplug the TV before cleaning. Never use liquid or aerosol cleaners.

29)WARNING: RISK OF ELECTRIC SHOCK!

Never spill liquids or push objects of any kind

into the TV cabinet slots.

4

30)[This item applies to projection TVs only.] If the air temperature rises suddenly (for example, when the TV is first delivered), condensation may form on the lenses. This can make the picture appear distorted or the color appear faded. If this happens, turn off the TV for 6 to 7 hours to allow the condensation to evaporate.

31)For added protection of your TV from lightning and power surges, always unplug the power cord and disconnect the antenna from the TV if you leave the TV unattended or unused for long periods of time.

32)During normal use, the TV may make occasional snapping or popping sounds. This is normal, especially when the unit is being turned on or off. If these sounds become frequent or continuous, unplug the power cord

and contact a Toshiba Authorized Service Center.

33)Possible Adverse Effects on TV Picture Tube: If a fixed (non-moving) pattern remains on the TV screen for long periods of time, the image can become permanently engrained in the picture tube and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it is displaying the following formats or images:

Fixed Images, such as PIP/POP windows, stock tickers, video game patterns, TV station logos, and websites.

Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (gray bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (gray bars on left and right sides of screen).

Service

34)WARNING: RISK OF ELECTRIC

SHOCK! Never attempt to service the TV yourself. Opening and

removing the covers may expose you to dangerous voltage or other hazards. Refer all servicing to a Toshiba Authorized Service Center.

QUALIFIED

SERVICE

TECHNICIAN

35)If you have the TV serviced:

Ask the service technician to use only replacement parts specified by the manufacturer.

Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition.

36)When the TV reaches the end of its useful life, ask a qualified service technician to properly dispose of the TV. Improper disposal may result in a picture tube implosion and possible personal injury.

0303

Contents

 

Important Safety Information .............................

2-4

Introduction................................................................

6

Welcome to Toshiba .........................................................

6

Exploring your new TV ...................................................

6

Connecting your TV ..................................................

7

Note regarding picture quality .........................................

7

Connecting a VCR ..........................................................

7

Connecting a cable converter box ....................................

8

Connecting a cable converter box and a VCR ..................

8

Connecting a DVD player or satellite receiver

 

and a VCR .......................................................................

9

Connecting a DVD player with component video

 

and a VCR .....................................................................

10

Connecting two VCRs ...................................................

11

Connecting a camcorder ................................................

12

Connecting an audio system ..........................................

12

Using the remote control ......................................

13

Preparing the remote control for use ..............................

13

Installing the remote control batteries ............................

13

Location of controls on TV and remote control .............

14

Programming the remote control to operate a cable

 

converter box, satellite receiver, VCR, DVD player,

or HTIB (home theater in a box) ................................

15

Remote control codes .......................................

15–16

Using the remote control to operate a cable

 

converter box, satellite receiver, VCR, DVD player,

or HTIB (home theater in a box) ................................

17

Setting up your TV ..................................................

18

Learning about the menu system ...................................

18

Changing the on-screen display language .......................

19

Programming channels into the channel memory ..........

19

Programming channels automatically ......................

19

Adding and erasing channels manually ....................

20

Changing channels ........................................................

20

Selecting the signal source ..............................................

21

Adjusting the IMAGE SHAPE feature ...........................

22

Using the TV’s features..........................................

23

Adjusting the channel settings ........................................

23

Switching between two channels .............................

23

Programming your favorite channels .......................

23

Labeling channels ...................................................

24

Adjusting the picture .....................................................

25

Adjusting the picture quality ...................................

25

Adjusting the color temperature ..............................

25

Selecting the picture preference mode .....................

26

Using the SVM (scan velocity modulation)

 

feature .................................................................

26

Resetting your picture adjustments .........................

27

Using the closed caption feature .....................................

28

Using the V-CHIP (parental control) feature .................

29

Entering the PIN code ............................................

29

If you forget your PIN code ....................................

29

Using the SET RATING feature .............................

30

MPAA rating blocking (Independent rating

 

system for movies) ...........................................

30

TV and YOUTH TV rating blocking

 

(Independent rating system for broadcasters) ... 31

Using the SET BLOCKING OPTIONS feature

.... 32

BLOCK MPAA UNRATED ..........................

32

BLOCK TV NONE RATING .......................

32

Unblocking programs temporarily ..........................

32

Using the BLOCK CHANNEL feature ..................

33

Using the NEW PIN CODE feature ......................

34

Adjusting the sound .......................................................

35

Muting the sound ...................................................

35

Using the MTS feature to select stereo/SAP

 

broadcasts ...........................................................

35

Using the SURROUND sound feature ...................

36

Adjusting the sound quality ....................................

36

Resetting your audio adjustments ...........................

37

Using the BBE High Definition Sound ...................

37

Using the StableSound feature ................................

38

Turning off the built-in speakers .............................

38

Displaying on-screen information ..................................

39

Setting the sleep timer ....................................................

39

Viewing the DEMO mode ............................................

39

Understanding the auto power off feature ......................

39

Understanding the last mode memory feature ................

39

Appendix ...................................................................

40

Specifications .................................................................

40

Troubleshooting .......................................................

41–42

Limited United States Warranty .....................................

43

Limited Canada Warranty ..............................................

44

Index ..........................................................................

47

5

Introduction

Introduction

Welcome to Toshiba

Congratulations! You have purchased one of the finest TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible.

• This manual applies to models 32AF44 and 35AF44. The model and serial numbers are on the back of the TV. Write these numbers in the space on the front cover of this manual for future reference.

• You may need to purchase additional audio or video cables to connect other equipment to your TV. See “Connecting Your TV” on pages 7–12 for more information.

• Instructions in this manual are based on using the remote control. You also can use the controls on the TV if they have the same name as those referred to in the instructions.

Please read all safety and operating instructions carefully, and keep this manual for future reference.

Exploring your new TV

You can operate your TV using the buttons on the remote control or TV front panel (behind the door). The TV’s front and back panels provide all the terminal connections you will need to connect other devices to your TV.

VIDEO 3 A/V IN

 

MENU

 

 

 

 

VOLUME zy

(with optional S-video)

 

 

 

 

 

 

TV front

CHANNEL zy

DEMO

MENU TV/VIDEO

VOLUME

CHANNEL

VIDEO-3 IN

 

 

 

 

S-VIDEO VIDEO L/MONO-AUDIO-R

 

 

 

 

 

 

x •zy

POWER

DEMO

TV/VIDEO

 

 

Remote sensor

 

 

 

 

POWER indicator

TV back

S-VIDEO

 

COLOR

 

 

STREAM

 

 

 

 

 

 

 

INPUT

 

 

VIDEO

 

Y

VIDEO

ANT( 75

)

 

 

 

 

 

 

L /

L

PB

L /

 

MONO

 

MONO

 

AUDIO

AUDIO

PR

AUDIO

 

R

R

 

R

 

 

 

 

 

VIDEO 1 VIDEO 2

 

 

 

 

IN

DVD IN

OUT

{

{ {

{

{

ANT

VIDEO 1

ColorStream

A/V

IN

IN

(component

OUT

 

VIDEO 2

video) IN

 

 

 

 

 

 

IN

 

 

 

6

Connecting your TV

Note: Cables are not supplied with your TV.

Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Coaxial cable uses “F” connectors.

Standard stereo A/V cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. Your TV’s standard A/V inputs are color-coded in the same manner as the cables.

S-Video cable is for use with video equipment that has S-Video connectors.

Component video cables come in sets of three (typically color-coded red, green, and blue), and are for use with video equipment that has component video connectors. Your TV’s ColorStream® (component video) inputs are color-coded in the same manner as the cables.

NOTE REGARDING PICTURE QUALITY

When connecting video equipment to your Toshiba TV:

For GOOD picture quality: Use a standard yellow video cable.

For BETTER picture quality: If your equipment has S-video connectors, use an S-video cable instead of a standard yellow video cable. (You still must connect the standard red and white audio cables for full system connection, but do not connect a standard yellow video cable at the same time or the picture performance will be unacceptable.)

For BEST picture quality: If your equipment has component video connectors, use component video cables instead of a standard yellow video cable or S-video cable. (You still must connect the standard red and white audio cables for full system connection.)

Coaxial (antenna) cable

Standard stereo A/V cables

(typically color-coded yellow for video, red and white for audio)

S-video cable

Component video cables

(typically color-coded red, green, blue)

CAUTION: Do not plug in any power cords until you have finished connecting all equipment.

Connecting a VCR

This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record one channel while watching another channel.

You will need:

two coaxial cables

one set of standard A/V cables

From Cable or Antenna

Stereo VCR

VIDEO

AUDIO

 

L

R

IN

IN from ANT OUT to TV

CH 3

OUT

CH 4

TV

ANT( 75)

S-VIDEO

 

COLOR

 

 

 

STREAM

 

 

 

INPUT

 

VIDEO

 

Y

VIDEO

 

 

 

L /

L

PB

L /

MONO

 

MONO

AUDIO

AUDIO

PR

AUDIO

R

R

 

R

 

 

 

VIDEO 1

VIDEO 2

 

IN

DVD IN

OUT

Note:

If you have a mono VCR, connect L/Mono to the VCR’s AUDIO OUT terminal using only one audio cable.

If you have a VCR with S-video, use an S-video cable (plus the standard audio cables) instead of a standard video cable for better picture quality. Do not connect a standard video cable and an S-video cable to VIDEO-1 on the TV back (or VIDEO-3 on the TV front) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Introduction

your TV

Connecting

 

 

 

 

RemoteControl

Usingthe

 

 

 

 

your TV

Settingup

 

 

 

 

Features

Usingthe TV’s

 

 

Appendix

Index

7

Connecting your TV

Connecting a cable converter box

This connection allows you to watch basic and premium channels. Tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and then use the converter box to change channels.

You will need:

• two coaxial cables

 

Cable converter box

 

 

 

From

IN

OUT

 

 

 

Cable

 

 

 

 

TV

 

 

 

 

 

 

 

S-VIDEO

 

COLOR

 

 

 

 

 

STREAM

 

 

 

 

 

INPUT

 

 

 

VIDEO

 

Y

VIDEO

 

ANT( 75

)

 

 

 

 

 

 

 

 

L /

L

PB

L /

 

 

MONO

 

MONO

 

 

AUDIO

AUDIO

PR

AUDIO

 

 

R

R

 

R

 

 

 

 

 

 

 

VIDEO 1

VIDEO 2

 

 

 

 

IN

DVD IN

OUT

Note:

When you use a converter box with your TV, the remote control may not operate certain features, such as channel y z, channel block, favorite channels, or channel labels.

Connecting a cable converter box and a VCR

This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes.

Set the TV signal source to VIDEO 1 (see “Selecting the signal source” on page 21); tune the VCR to channel 3 or 4 (the same channel as the converter box output switch); and use the cable converter box to change channels.

You will need:

three coaxial cables

one set of standard A/V cables

TV

S-VIDEO

 

COLOR

 

 

 

STREAM

 

 

 

INPUT

 

VIDEO

 

Y

VIDEO

ANT( 75 )

 

 

 

 

 

L /

L

PB

L /

MONO

 

MONO

AUDIO

AUDIO

PR

AUDIO

R

R

 

R

 

 

 

VIDEO 1

VIDEO 2

 

 

IN

DVD IN

OUT

From Cable

Cable converter IN

box

OUT

Stereo VCR

L

R

IN from ANT OUT to TV

IN

 

CH 3

OUT

CH 4

 

VIDEO

AUDIO

Note:

When you use a converter box with your TV, the remote control may not operate certain features, such as channel y z, channel block, favorite channels, or channel labels.

If you have a mono VCR, connect L/Mono to the VCR’s AUDIO OUT terminal using only one audio cable.

If you have a VCR with S-video, use an S-video cable (plus the standard audio cables) instead of a standard video cable for better picture quality. Do not connect a standard video cable and an S-video cable to VIDEO-1 on the TV back (or VIDEO-3 on the TV front) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

8

Connecting a DVD player or satellite receiver and a VCR

This connection allows you to watch DVD/satellite, VCR, or TV programs, and record from the satellite receiver or TV. You can record one TV program while watching another TV program.

You will need:

two (or three, if satellite receiver is used) coaxial cables

one set of standard A/V cables

one S-video cable

one pair of standard audio cables

Stereo VCR

From Cable, Cable

Box, or Antenna

VIDEO

AUDIO

 

L R

IN from ANT

OUT to TV

 

 

IN

 

 

 

CH 3

 

 

 

 

OUT

CH 4

 

 

 

 

 

 

 

 

 

TV

 

 

 

 

 

 

 

S-VIDEO

 

COLOR

 

 

 

 

 

STREAM

 

 

 

 

 

INPUT

 

 

 

VIDEO

 

Y

VIDEO

 

ANT( 75

)

 

 

 

 

 

 

 

 

L /

L

PB

L /

 

 

MONO

 

MONO

 

 

AUDIO

AUDIO

PR

AUDIO

R

R

R

 

 

VIDEO 1

VIDEO 2

 

IN

DVD IN

OUT

Note:

For the highest possible picture quality from a DVD player/satellite receiver that does not have component video connections, use an S-video cable (plus the standard audio cables) between the TV and DVD player/satellite receiver. If your DVD player (or satellite receiver) has component video, see “Connecting a DVD player with component video and a VCR” on page 10.

Do not connect both an S-video cable and a standard video cable to VIDEO-1 on the TV back (or VIDEO-3 on the TV front) at the same time, or the picture performance will be unacceptable.

Do not connect the DVD player/satellite receiver and VCR to the same A/V inputs on the TV. (See the illustration at left, which shows the DVD player/satellite receiver connected to VIDEO-1 and the VCR connected to VIDEO-2.)

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Introduction

your TV

Connecting

 

 

 

 

RemoteControl

Usingthe

 

 

 

 

your TV

Settingup

 

 

From Satellite Dish

AUDIO

OUT

(for Satellite

L

IN from ANT

Receiver only)

R

S-VIDEO VIDEO

 

 

OUT OUT

DVD Player/Satellite Receiver with S-video

the UsingeaturesF

TV’s

Appendix

Index

9

Connecting your TV

Connecting a DVD player with component video and a VCR

This connection allows you to watch DVD, VCR, or TV programs. You can record one TV program while watching another TV program. You also can record a TV program while watching a DVD.

Your TV has ColorStream® (component video) inputs. Connecting your TV to a DVD player with component video (such as a Toshiba DVD player with ColorStream®) can greatly enhance picture quality and realism.

You will need:

two coaxial cables

one set of standard A/V cables

one set of component video cables

one pair of standard audio cables

From Cable, Cable

Box, or Antenna

Stereo VCR

VIDEO

AUDIO

 

 

L

R

IN

IN from ANT OUT to TV

CH 3

 

OUT

 

CH 4

 

 

 

 

 

TV

 

 

 

 

S-VIDEO

COLOR

 

 

 

STREAM

 

 

 

INPUT

 

 

VIDEO

Y

VIDEO

ANT( 75

)

 

 

 

 

L /

PB

L /

 

MONO

L

MONO

AUDIO

AUDIO

PR AUDIO

R

R

R

 

 

VIDEO 1

VIDEO 2

 

IN

DVD IN

OUT

Note:

If your DVD player does not have component video connections, see “Connecting a DVD player or satellite receiver and a VCR” on page 9.

The ColorStream (component video) inputs on this TV are for use with devices that output 480i interlaced signals ONLY. This TV will not accept or display 480p or 720p progressive scan signals or 1080i interlaced high-definition signals. If you connect a high-definition set-top receiver, 480p progressive scan DVD player, or other similar device to the TV’s ColorStream inputs, you must switch the device’s output to 480i interlaced mode first. Failure to do this will cause a poor picture or no picture

to display.

If you have a mono VCR, connect L/Mono to the VCR’s AUDIO OUT terminal using only one audio cable.

If you have a VCR with S-video, use an S-video cable instead of a standard video cable. Do not connect a standard video cable and an S-video cable to VIDEO-1 on the TV back (or VIDEO-3 on the TV front) at the same time, or the picture performance will be unacceptable.

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

 

 

 

 

 

AUDIO

 

 

 

 

L

OUT

 

Y

PB

PR

L

Satelite IN

 

 

 

 

 

 

 

S-VIDEO

COMPONENT VIDEO VIDEO

R

R

 

 

OUT

DVD player with component video

10

Connecting two VCRs

This connection allows you to record (dub/edit) from “VCR 1” to “VCR 2” (as illustrated below) while watching the videotape. You also can record from one TV channel while watching another channel.

You will need:

two coaxial cables

two sets of standard A/V cables

From

VCR 1 (plays)

 

Cable,

 

 

 

Cable Box,

VIDEO

AUDIO

or Antenna

 

L R

IN

IN from ANT OUT to TV

CH 3

OUT

CH 4

Note:

Do not connect the same VCR to the output and input connections on the TV at the same time. (See the illustration at left, which shows VCR1 connected to VIDEO-1 IN on the TV, and VCR2 connected to A/V OUT on the TV.)

If your VCR has S-video, you can use an S-video cable (plus the standard audio cables) instead of a standard video cable for better picture quality. Do not connect both a standard video cable and an S-video cable to VIDEO-1 (or VIDEO-3) at the same time, or the picture performance will be unacceptable.

To dub or edit, VCR 2 must select Line IN, and the TV must select VIDEO-1.

 

 

 

TV

 

S-VIDEO

 

COLOR

 

 

 

 

STREAM

 

 

 

 

INPUT

 

 

VIDEO

 

Y

VIDEO

ANT( 75

)

 

 

 

 

 

 

L /

L

PB

L /

 

MONO

 

MONO

 

AUDIO

AUDIO

PR

AUDIO

 

R

R

 

R

 

 

 

 

VIDEO 1

VIDEO 2

 

IN

DVD IN

OUT

VCR 2 (records)

VIDEO

AUDIO

L

R

 

IN

CH 3

OUT

CH 4

 

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

Introduction

your TV

Connecting

 

 

 

 

RemoteControl

Usingthe

 

 

 

 

your TV

Settingup

 

 

 

 

Features

Usingthe TV’s

 

 

Appendix

Index

11

Connecting your TV

Connecting a camcorder

This connection allows you to watch videos recorded on a camcorder.

You will need:

• one set of standard A/V cables (see notes at right)

Camcorder

Note:

For better picture quality, if your camcorder has S-video, you can use an S-video cable (plus the standard audio cables) instead of a standard video cable.

Do not connect both a standard video cable and an S-video cable at the same time, or the picture performance will be unacceptable.

VIDEO

AUDIO

 

OUT

 

L

 

R

TV front panel

DEMO

MENU TV/VIDEO

VOLUME

CHANNEL

VIDEO-3 IN

 

 

 

S-VIDEO VIDEO L/MONO-AUDIO-R

 

 

 

Connecting an audio system

This connection allows you to use an audio amplifier to adjust the audio level. This connection also allows you to use external speakers.

To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers. (See“Turning off the built-in speakers” on page 39.)

You will need:

one coaxial cable

one pair of standard audio cables

Amplifier

LINE IN

L R

TV

S-VIDEO

COLOR

 

STREAM

INPUT

From Cable,

VIDEO

 

Y

VIDEO

Cable Box,

 

ANT( 75 )

 

 

 

 

 

L /

 

PB

L /

or Antenna

 

MONO

L

 

MONO

 

 

 

AUDIO

AUDIO

PR

AUDIO

 

R

R

 

R

 

 

 

 

 

VIDEO 1

VIDEO 2

 

 

 

IN

DVD IN

 

OUT

12

Using the remote control

Preparing the remote control for use

Your TV remote control can operate your TV and most cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if they are different brands.

If you have a Toshiba device:

Your TV remote control is preprogrammed to operate most Toshiba devices. See pages 14 and 17.

If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate:

You can program the TV remote control so it will operate the other device. See pages 15–16.

Installing the remote control batteries

1 Remove the battery cover from the back of the remote control.

Squeeze tab and lift cover.

2 Install two “AA” size batteries, making sure to match the + and – signs on the batteries to the signs on the battery compartment.

Caution:

Dispose of batteries in a designated disposal area. Do not throw batteries into a fire.

Do not mix battery types or combine used batteries with new ones.

Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

If you do not intend to use the remote control for a long time, remove the batteries.

3 Reinsert the battery cover in the remote control until the tab snaps.

Introduction

your TV

Connecting

 

 

 

 

RemoteControl

Usingthe

 

 

 

 

your TV

Settingup

 

 

 

 

Features

Usingthe TV’s

 

 

Appendix

Index

13

Location of controls on TV and remote control

For details on the use of each control, refer to pages in brackets.

TV front panel

VIDEO-3 A/V IN [21]

 

MENU [18]

 

 

 

 

 

(with optional S-video)

 

 

 

VOLUME st

 

 

 

TV Front

 

 

 

 

 

 

 

 

 

 

CHANNEL st[20]

 

 

DEMO

MENU TV/VIDEO

VOLUME

CHANNEL

 

 

VIDEO-3 IN

 

 

 

 

 

 

S-VIDEO VIDEO L/MONO-AUDIO-R

 

 

 

 

theUsing

ControlRemote

 

 

x •zy

POWER

DEMO TV/VIDEO

 

Remote sensor

 

 

 

 

 

 

 

 

 

[40]

[21]

 

 

Power indicator

Remote control

TV/VIDEO [21]

}

POWER

RECALL [40]

 

 

Channel numbers [20]

 

CH RTN (channel return) [23]

SLEEP [40]

}

PIC SIZE [22]

MENU [18]

stTS [18]

FAV ts (favorite channels) [23]

 

Access channels programmed into

EXIT [18]

the Favorite Channel memory only.

 

 

CHANNEL st[20]

 

VOLUME st

Access channels programmed

 

 

 

into the TV’s memory only.

 

 

Device Switch [15,17]

 

MUTE [36]

Set to “TV” to control the TV.

 

 

 

VCR or DVD functions [17] {

 

 

14

Programming the remote control to operate a cable converter box, satellite receiver, VCR, DVD player, or HTIB (home theater in a box)

Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote control to operate a non-Toshiba device or a Toshiba device that it is not preprogrammed to operate, follow the steps below. For details on using the remote control to operate the device, see page 17.

 

RECALL

 

POWER

}

Channel

Numbers

Device Switch

Remote control codes

1 In the remote control code table (below and on the next page), find the code for your device. If more than one code is listed, try each one separately until you find one that works.

2 Set the Device Switch to the type of device you are programming the remote control to operate—CBL/SAT (for a cable converter box or satellite receiver), VCR (for a VCR or TV/VCR combo), or DVD (for a DVD player or HTIB [home theater in a box]).

3 While holding down RECALL, press the Channel Number buttons to enter the 3-digit code for your device.

4 To test the code, turn on the device, point the remote control at it, and press POWER.

–If the correct code was entered, the device will turn off.

–If the device does not respond, repeat steps 1–4 using another code.

Note: After programming the TV remote control to operate your other device, confirm that all necessary keys are operational. If some keys on the TV remote control do not operate certain features on your other device, reprogram the remote control using another code (if other codes are listed for your device). If, after trying all listed codes, the necessary buttons do not operate your device, use the device’s original remote control.

5 Remember to set the Device Switch back to “TV” to control the TV.

6 For future reference, write down the code(s) you used:

DEVICE

CODE

DEVICE

CODE

 

 

 

 

 

 

 

 

 

 

 

 

Note:

Each time you change the batteries, you must reprogram the remote control.

Some newer VCRs respond to either of two codes. These VCRs have a switch labeled “VCR1/VCR2.” If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position (“VCR1” or “VCR2”) and reprogram the remote control.

In some cases you may not be able to operate your device with the TV remote control. Your other device may use a code that is not recognized by the TV remote control. If this happens, you will need to use the remote control provided with the device.

Cable converter box

 

General Instruments: 062,

Philips: 066, 067, 068,

Sears: 095

 

Universal: 065, 092, 097,

 

089, 096

070, 072, 073, 074,

Signature: 062

 

099, 102, 103

ABC: 061, 062, 063, 082,

 

 

 

Hamlin: 093

075, 091, 092

Signature 2000: 096

 

Wards: 096

084, 087, 091, 092,

 

 

 

Hitachi: 062, 095, 096

Pioneer: 076, 077

Sprucer: 081, 085

 

 

096, 098

 

Jasco: 097

Proscan: 061, 062

Starcom: 069, 082, 087,

 

Satellite receiver

Archer: 065, 092, 097, 099

 

Jerrold: 062, 069, 071,

Radio Shack: 092, 097,

096, 103, 104

 

Alphastar: 038, 059

Cableview: 064, 094

 

 

 

082, 086, 089, 091,

099

Stargate: 069, 090

 

 

 

Chaparral: 034

Century: 092

 

 

 

096

RCA: 064, 081

Sylvania: 095, 100

 

 

 

DISH Network: 057

Citizen: 090, 092, 097

 

 

 

Magnavox: 072, 096

Realistic: 065

TeleView: 090

 

 

 

Drake: 020, 040, 044, 046,

Contec: 083, 085, 086,

 

 

 

Memorex: 091, 092, 104

Recoton: 102

Texscan: 100

 

 

 

050, 053

088, 093, 098

 

 

 

Multi Canal: 090

Samsung: 077, 090

Tocom: 071, 084, 085

 

 

 

Echostar: 018, 041, 051

Diamond: 093

 

 

 

Novavision: 101

Scientific Atlanta: 063,

U. S. Electronics: 087,

 

 

 

Express Vu: 057

Eagle: 091

 

 

 

Panasonic: 081, 083, 085

078, 079, 080, 088,

096, 098

 

 

 

Fujitsu: 027

GE: 061, 062

 

 

 

Philco: 087

098, 101, 105

United Cable: 082

 

 

 

GE: 008, 009, 013

Gemini: 069, 070, 094

 

 

 

 

 

 

 

 

 

 

 

 

 

Introduction

your TV

Connecting

 

 

 

 

RemoteControl

Usingthe

 

 

 

 

your TV

Settingup

 

 

 

 

Features

Usingthe TV’s

 

 

Appendix

Index

15

Loading...
+ 33 hidden pages