Form Number 3361-836 Rev A
Full-Flight Auger Bit
Compact Utility Loader
Model No. 22820
Model No. 22821
Model No. 22822
Model No. 22823
Parts Catalog
Ordering Replacement Parts
To order replacement parts, please supply the part number, the quantity, and the description of each part desired.
Understanding Reference Numbers
Each Identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part.
This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in the form a:b. The a represents the reference number of the entire service assembly and the b represents a sequential number unique to each part within the service assembly.
For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1, 6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustrations and in part lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more than one part, the reference number has the form nX y. The n represents the quantity of the part, the X is the multiplication symbol, and the y represents the reference number.
For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.
Register your product at www.Toro.com |
© The Toro Company - 2009 |
All Rights Reserved |
Contents
Description |
Page |
Description |
Page |
6-Inch Auger Bit Assembly . . . |
. . . 3 |
12-Inch Auger Bit Assembly . . . |
. . . 5 |
9-Inch Auger Bit Assembly . . . |
. . . 4 |
15-Inch Auger Bit Assembly . . . |
. . . 6 |
|
|
Attachments and Accessories List . . . |
. . . 7 |
Part Description Abbreviations
Part descriptions in this catalog may include the following abbreviations. |
|
||
AR. . . . . . . . . . . . . . . |
as required |
HYD. . . . . . . . . . . . . |
hydraulic |
ASM. . . . . . . . . . . . . |
assembly |
LH. . . . . . . . . . . . . . . |
left hand |
BBC. . . . . . . . . . . . . |
blade brake clutch |
NI. . . . . . . . . . . . . . . |
nylon insert |
CARR. . . . . . . . . . . . |
carriage |
NPTF. . . . . . . . . . . . |
national pipe thread fine |
DEG. . . . . . . . . . . . . |
degrees |
PFH. . . . . . . . . . . . . |
phillips flat head |
EXT. . . . . . . . . . . . . . |
external |
PPH. . . . . . . . . . . . . |
phillips pan head |
FH. . . . . . . . . . . . . . . |
flat head |
PPHTF. . . . . . . . . . . |
phillips pan head thread |
GA. . . . . . . . . . . . . . |
gauge |
|
forming |
HD. . . . . . . . . . . . . . |
heavy-duty |
PRH. . . . . . . . . . . . . |
phillips round head |
HF. . . . . . . . . . . . . . . |
hex flange |
PTH. . . . . . . . . . . . . |
phillips truss head |
HH. . . . . . . . . . . . . . |
hex head |
PTO. . . . . . . . . . . . . |
power-take-off |
HHF. . . . . . . . . . . . . |
hex head flange |
RH. . . . . . . . . . . . . . |
right hand |
HHFTF. . . . . . . . . . . |
hex head flange thread forming |
ROPS. . . . . . . . . . . . |
roll-over protection system |
HJ. . . . . . . . . . . . . . . |
hex jam |
SFH. . . . . . . . . . . . . |
slotted fillister head |
HLH. . . . . . . . . . . . . |
hex lag head |
SHH. . . . . . . . . . . . . |
slotted hex head |
HOC. . . . . . . . . . . . . |
height-of-cut |
SHWH. . . . . . . . . . . . |
slotted hex washer head |
HSBH. . . . . . . . . . . . |
hex socket button head |
SPH. . . . . . . . . . . . . |
slotted pan head |
HSFH. . . . . . . . . . . . |
hex socket flat head |
SQH. . . . . . . . . . . . . |
square head |
HSH. . . . . . . . . . . . . |
hex socket head |
SRH. . . . . . . . . . . . . |
slotted round head |
HWH. . . . . . . . . . . . . |
hex washer head |
STD. . . . . . . . . . . . . |
standard |
HWHTF. . . . . . . . . . . |
hex washer head thread |
TAP. . . . . . . . . . . . . . |
self tapping |
|
forming |
TTH. . . . . . . . . . . . . . |
torx truss head |
0 |
3361-836 Rev A |
|
|
|
6-Inch Auger Bit Assembly |
|||||
Ref |
Part No. |
Qty. |
Description |
|
|
|
|
|
2 |
107-9314 |
1 |
Pilot-Auger |
|
|
|
|
|
3 |
107-9313 |
2 |
Tooth-Outer |
|
|
|
|
|
5 |
323-20 |
1 |
Screw-HH |
|
|
|
|
|
6 |
32128-21 |
1 |
Nut-HF |
|
|
|
|
|
7 |
3233-20 |
2 |
Screw-CARR |
|
|
|
|
|
8 |
32128-50 |
2 |
Nut-Flange |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3
Loading...