Topcom WBR 7201 N User Manual

0 (0)
SKYR@CER WBR 7201n
WIRELESS ROUTER
Quick Installation Guide / Snelstartgids / Guide d'installation
rapide / Kurzanleitung installation / Guía de instalación rápida /
Guia de instalação rápida / Skrócona instrukcja instalacji
v 1.0
This product is in compliance with the essential requirements and other
relevant provisions of the R&TTE directive 89/336/EEC.
http://www.topcom.net/support/cedeclarations.php
UK The features described in this manual are published with reservation to
modifications.
NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd onder
voorbehoud van wijzigingen.
FR Les possibilités décrites dans ce manuel sont publiées sous réserve de
modifications.
DE Die in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden
vorbehaltlich Änderungen publiziert.
ES Las características descritas en este manual pueden ser objeto de futuras
modificaciones.
PT As características descritas neste manual são publicadas sob reserva de
modificação.
PL Waciwoci opisane w niniejszej instrukcji obsugi s publikowane z
zatrzeeniem prawa wprowadzenia zmian.
SK Vlastnosti popísané v tejto príruke sú publikované s vyhradeným právom na
zmenu
UK The CE symbol indicates that the unit complies with the essential requirements of
the R&TTE directive.
NL Het toestel voldoet aan de basiseisen van de R&TTE-richtlijn. Dit wordt bevestigd
door de CE-markering.
FR La conformité de l’appareil avec les exigences fondamentales de la directive
européenne R&TTE relative aux terminaux, est confirmée par le label CE.
DE Die Übereinstimmung des Gerätes mit den grundlegenden Anforderungen der
R&TTE-Richtlinie ist durch das CE-Kennzeichen bestätigt.
ES El sello CE corrobora la conformidad del equipo con los requerimientos básicos
de la directiva R&TTE.
PT O símbolo CE indica que esta unidade cumpre com os requisitos essenciais da
directiva R&TTE. PL Symbol CE oznacza, e urzdzenie spenia istotne wymogi dyrektywy R&TTE. SK Symbol CE oznauje, že jednotka súhlasí s hlavnými požiadavkami R&TTE
smernice.
For use in all EU countries, Switzerland, Norway, Turkey and Russia.
For France, the output power is restricted if used outdoor and in the range 2454-2483,5 Mhz.
For Italy, depending on the usage, a general authorization may be required.
English ......................................................... 1
1 Connect your router................................................................................................1
2 Setup the Broadband Router................................................................................. 2
3 Check the Internet Connection Status.................................................................. 9
4 Setup the Wireless Network.................................................................................10
4.1 WPS............................................................................................................................... 10
4.2 Setup the (E)SSID......................................................................................................... 10
4.3 Set the wireless Encryption ........................................................................................ 11
5 Warranty................................................................................................................. 13
5.1 Warranty period............................................................................................................ 13
5.2 Warranty handling........................................................................................................ 13
5.3 Warranty exclusions.................................................................................................... 13
6 Disposal of the device (environment).................................................................13
7 Cleaning.................................................................................................................14
Nederlands................................................. 15
1 Uw router aansluiten............................................................................................. 15
2 De breedbandrouter instellen.............................................................................. 16
3 Controleer de status van de internetverbinding................................................23
4 Het draadloos netwerk instellen..........................................................................24
4.1 WPS............................................................................................................................... 24
4.2 (E)SSID instellen .......................................................................................................... 25
4.3 De draadloze encryptie instellen ................................................................................ 25
5 Garantie.................................................................................................................. 27
5.1 Garantietermijn............................................................................................................. 27
5.2 Afwikkeling van garantieclaims.................................................................................. 27
5.3 Garantiebeperkingen................................................................................................... 27
6 Afvoeren van het toestel (milieu)......................................................................... 28
7 Reinigen................................................................................................................. 28
Français...................................................... 29
1 Connexion de votre routeur................................................................................. 29
2 Configuration du routeur large bande ................................................................30
3 Contrôle de l'état de la connexion Internet ........................................................ 37
4 Configuration du réseau sans fil......................................................................... 39
4.1 WPS............................................................................................................................... 39
4.2 Configurer le (E)SSID................................................................................................... 39
4.3 Définir le cryptage de la liaison sans fil..................................................................... 40
5 Garantie.................................................................................................................. 41
5.1 Période de garantie...................................................................................................... 41
5.2 Mise en uvre de la garantie....................................................................................... 42
5.3 Exclusions de garantie................................................................................................ 42
6 Mise au rebut de l'appareil (environnement)...................................................... 42
7 Nettoyage...............................................................................................................42
I
Deutsch ...................................................... 43
1 Anschluss Ihres Routers...................................................................................... 43
2 Konfiguration des Breitband-Routers................................................................. 44
3 Prüfen des Internetverbindungsstatus............................................................... 51
4 Konfiguration des drahtlosen Netzwerks........................................................... 52
4.1 WPS............................................................................................................................... 52
4.2 Konfigurieren der (E)SSID........................................................................................... 53
4.3 Einstellen der drahtlosen Verschlüsselung .............................................................. 54
5 Garantie.................................................................................................................. 55
5.1 Garantiezeit................................................................................................................... 55
5.2 Abwicklung des Garantiefalls..................................................................................... 55
5.3 Garantieausschlüsse................................................................................................... 56
6 Entsorgung des Geräts (Umweltschutz)............................................................. 56
7 Reinigung............................................................................................................... 56
Espaol ...................................................... 57
1 Conexión del router..............................................................................................57
2 Configuración del router de banda ancha..........................................................58
3 Comprobación del estado de la conexión a Internet......................................... 65
4 Configuración de la red inalámbrica................................................................... 66
4.1 WPS............................................................................................................................... 66
4.2 Configuración del (E)SSID .......................................................................................... 67
4.3 Configuración del cifrado inalámbrico ...................................................................... 67
5 Garantía.................................................................................................................. 69
5.1 Período de garantía...................................................................................................... 69
5.2 Tratamiento de la garantía .......................................................................................... 69
5.3 Limitaciones de la garantía......................................................................................... 69
6 Eliminación del dispositivo (medio ambiente)................................................... 70
7 Limpieza.................................................................................................................70
Portugus................................................... 71
1 Ligue o router........................................................................................................71
2 Configure o Router de Banda Larga ................................................................... 72
3 Verifique o estado da ligaço  Internet.............................................................. 79
4 Configure o Router Wireless................................................................................80
4.1 WPS............................................................................................................................... 80
4.2 Configure o (E)SSID..................................................................................................... 81
4.3 Configure a Encriptaço da rede wireless................................................................. 81
5 Garantia.................................................................................................................. 83
5.1 Período de garantia...................................................................................................... 83
5.2 Accionamento da garantia .......................................................................................... 83
5.3 Excluses de garantia ................................................................................................. 83
6 Eliminaço do dispositivo (ambiente)................................................................. 84
7 Limpeza..................................................................................................................84
II
Polski.......................................................... 85
1 Podczenie routera..............................................................................................85
2 Konfiguracja szerokopasmowego routera ......................................................... 86
3 Sprawd status poczenia z internetem ............................................................93
4 Konfiguracja sieci bezprzewodowej.................................................................... 94
4.1 WPS............................................................................................................................... 94
4.2 Konfiguracja (E)SSID................................................................................................... 94
4.3 Wczanie szyfrowania komunikacji bezprzewodowej............................................. 95
5 Gwarancja..............................................................................................................96
5.1 Okres gwarancji ........................................................................................................... 96
5.2 Obsuga gwarancji....................................................................................................... 97
5.3 Wyjtki od gwarancji.................................................................................................... 97
6 Usuwanie urzdzenia (rodowisko) ....................................................................97
7 Czyszczenie...........................................................................................................97
Slovensky................................................... 98
1 Pripojte svoj router............................................................................................... 98
2 Nastavenie pre širokopásmový Broadband Router........................................... 99
3 Skontrolujte Štatút internetového pripojenia................................................... 106
4 Nastavenie Bezdrôtovej siete ............................................................................ 107
4.1 WPS............................................................................................................................. 107
4.2 Nastavenie (E)SSID.................................................................................................... 107
4.3 Nastavte bezdrôtové Kódovanie............................................................................... 108
5 Záruka .................................................................................................................. 109
5.1 Záruná doba.............................................................................................................. 109
5.2 Manipulácia so zárukou............................................................................................. 110
5.3 Odopretie záruky........................................................................................................ 110
6 Likvidácia zariadenia (životné prostredie)........................................................ 110
7 istenie ................................................................................................................ 110
III
English
Connect your router
1 Connect your router
Please connect your router according to the diagram below.
POWER: The power port is to connect the 12V DC power adapter. J The power LED on the front panel will go ON when the power adapter is connected.
WAN: The WAN port is to connect your Cable/DSL modem. The link LED in the front
panel will indicate that the ADSL line is connected.
J The WAN LED will go ON if the network Ethernet cable is properly connected.
Ports 1- 4: This is to connect up to 4 pc's or other network devices. J The LAN LED's will indicate the connection status.
Reset/WPS Button: J To load default settings, press the reset button and hold it for at least 20 seconds. It
will load the factory default settings for the device. Do not press the reset button unless you want to clear the current settings.
J To start the WPS (Wi-Fi Protected Setup), press the key for about 4 seconds.
ENGLISH
1
Setup the Broadband Router
2 Setup the Broadband Router
It is strongly recommended to configure your router by use of a wired connection. So, please connect your computer to one of the Ethernet ports of the router by use of an Ethernet cable.
J Open the Internet Explorer and type 192.168.1.1 in the URL Address bar.
- Internet Explorer URL Address bar -
Now the login screen will appear.
J Enter the username and password.
- Login screen -
By default the username is admin and the password is admin.
J Click OK to proceed.
Now you enter the web management of your Wireless Router
- Wireless Router Web management page -
2
J Choose Quick Setup Wizard to start the configuration.
J In the next screen you can set the Time Zone.
- Time Zone settings -
1
Set Time Zone: Please select your region.
2 Time Server Address: You can enter the IP address of your preferred
Time Server or you can leave the default setting.
3 Daylight Savings: Here you can Enable the Daylight Savings. Please
enter the start and end date of the Daylight Savings.
J Click Next to proceed.
Setup the Broadband Router
ENGLISH
- Broadband connection type -
J Now choose your Broadband Connection Type:
3
Setup the Broadband Router
o Cable modem: Used for cable modem connections.
1 2 MAC Address: Some Cable Internet Providers will keep the Mac
JClick OK to proceed.
o Fixed-IP xDSL: Used for cable modem or DSL bridge with fixed IP address.
- IP Address info for Cable Modem -
Host Name: Enter your Host Name if necessary.
address of your computer in their server. In this case you should clone the Mac address of your computer.
JClick Clone Mac Address to copy your computers Mac address into the router.
- IP Address info for Fixed-IP xDSL -
IP Address assigned by your Service Provider: Please enter the fixed
1
WAN IP address.
2 Subnet Mask: Enter the Subnet Mask. 3 DNS Address : Enter the DNS address. 4 Service Provider Gateway Address: Enter the Gateway IP address.
JClick OK to proceed.
4
o PPPoE xDSL: Used for DSL bridge with PPPoE connection.
- IP Address info for PPPoE xDSL -
1
Username: Enter your PPPoE username.
2 Password: Enter your password. 3 Service Name: Enter the service name (for example the name of your
Internet Provider).
4 MTU: Enter the MTU size. (If the size is not specified by your Internet
Provider, please leave the default value at 1492.)
5 Connection type:
Continuous: The PPP-connection will always be active.
Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will disconnect when there is no more Internet traffic during the Idle Time (minutes), entered in the field below.
Manual: The PPP connection is established / disconnected
manually by clicking Connect / Disconnect.
JClick OK to proceed.
Setup the Broadband Router
ENGLISH
5
Setup the Broadband Router
o PPTP xDSL: used for cable modem or DSL bridge with PPTP connection. PPTP
can also be used when the router is connected to another LAN network.
- IP Address info for PPTP xDSL -
WAN connection: DHCP client or Fixed IP address
Obtain an IP address automatically: 1 Host Name: Enter your Host Name if necessary. 2 MAC Address: Some Cable Internet Providers will keep the MAC
address of your computer in their server. In this case you should clone the Mac address of your computer. Click Clone Mac Address to copy your computers Mac address into the router.
Use the following IP address: 1 IP address: Please enter the fixed IP address. 2 Subnet Mask: Enter the Subnet mask. 3 Default Gateway: Enter the Gateway IP address.
PPTP Settings: 1 User ID: Enter the PPTP username. 2 Password: Enter the PPTP password. 3 PPTP Gateway: Enter the Gateway.
6
4 Connection ID: Enter the Connection ID when necessary. 5 MTU: Enter the MTU size. (If the size is not specified, please leave the
default value at 1492.)
6 BEZEQ-ISRAEL: Only for Israel. 7 Connection Type:
Continuous: The PPP-connection will always be active.
Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will disconnect when there is no more Internet traffic during the Idle Time (minutes), entered in the field below.
Manual: The PPP connection is established / disconnected
manually by clicking Connect / Disconnect.
JClick OK to proceed.
o L2TP xDSL: Used for cable modems with L2TP connection.
Setup the Broadband Router
ENGLISH
- IP Address info for L2TP xDSL -
WAN connection: DHCP client or Fixed IP address
Obtain an IP address automatically: 1 Host Name: Enter your Host Name if necessary. 2 MAC Address: Some Cable Internet Providers will keep the MAC
address of your computer in their server. In this case you should clone the Mac address of your computer. Click Clone Mac Address to copy your computers Mac address into the router.
7
Setup the Broadband Router
Use the following IP address: 1 IP address: Please enter the fixed IP address. 2 Subnet Mask: Enter the Subnet mask. 3 Default Gateway: Enter the Gateway IP address.
L2TP Settings: 1 User ID: Enter the L2TP username. 2 Password: Enter the L2TP password. 3 L2TP Gateway: Enter the Gateway. 4 Connection ID: Enter the Connection ID when necessary. 5 MTU: Enter the MTU size. (If the size is not specified, please leave the
6 Connection Type:
JClick OK to proceed.
default value at 1492.)
Continuous: The PPP-connection will always be active.
Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will disconnect when there is no more Internet traffic during the Idle Time (minutes), entered in the field below.
Manual: The PPP connection is established / disconnected
manually by clicking Connect / Disconnect.
o Telstra Big Pond: not for Europe.
Now the quick setup wizard is finished.
J Click Apply to finish.
The router will reboot now. This will take about 60 seconds.
J Click OK when the reboot sequence is done.
8
Check the Internet Connection Status
Return to the home page by clicking HOME in the right top of the screen.
3 Check the Internet Connection Status
The WAN connection can be checked in the Status Info screen on the router Web page.
Now click Internet Connection.
ENGLISH
- Internet Connection Status -
J All information about the Internet connection will be visible: WAN IP address,
Gateway, DNS servers, ..
9
Setup the Wireless Network
4 Setup the Wireless Network
4.1 WPS
The Skyr@cer WBR 7201n supports the Wi-Fi Protected Setup (WPS) feature. The WPS can send the wireless encryption settings from the router automatically to the WPS-enabled wireless client (for example Skyr@cer USB 4201n).
This means that you don't need to enter the encryption settings in your WPS-enabled wireless adapter if you want to connect to your router. Just press the WPS key from the router, then press the WPS key on the wireless adapter and the secured connection will be established after a few seconds.
If you don't setup the router wireless encryption settings, the WPS will automatically create a very sophisticated encryption key (WPA-PSK) for you.
If you want to use non-WPS Wireless client adapter it is recommended to setup the wireless encryption manually.
For the automatic WPS setup you don't need to go through sections 4.2 and 4.3 below.
4.2 Setup the (E)SSID
J Click General Setup and go to Wireless > Basic Settings
>
- Wireless Settings page -
1
Choose the wireless Mode: Access Point (AP) is default.
10
>
Setup the Wireless Network
2 Enter the Wireless Network name (ESSID). By default it will be
“Topcom_” + six last digits of the MAC address.
You can find the MAC address at the bottom label of the router.
3 There are 13 available radio channels. You are free to select one of
these channels.
If you have more than one wireless router or access point in your home or office, make sure not to use the same channel.
J Click Apply to confirm.
4.3 Set the wireless Encryption
Topcom strongly recommends to enable encryption. This is the only way to prevent that unwanted users access your wireless network.
Three encryption settings are available: WEP 64bit, WEP 128bit and WPA(2).
J Choose Security Settings to access the encryption menu.
By default the encryption is disabled. In this screen you can select your type of encryption.
ENGLISH
11
Setup the Wireless Network
In the example below 64-bit WEP Encryption is set.
- Security Settings page -
1
Encryption: Choose WEP
2 Key Length: 64-bit. Now enter your WEP key: You are free to invent a
code (for example 12345abcde). Please make sure to use the same key in your wireless adapter installed in your Wireless computer or laptop.
Please write down this key and hide it from unauthorised users.
3 For 64-bit encryption 10 hexadecimal digits should be entered.
For 128-bit encryption 26 hexadecimal digits should be entered.
Following characters are valid to be as hexadecimal: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 a, b, c, d, e, f A, B, C, D, E, F
JClick SAVE to save the settings. JClick Apply to confirm.
12
5 Warranty
5.1 Warranty period
The Topcom units have a 24-month warranty period. The warranty period starts on the day the new unit is purchased. The warranty on batteries is limited to 6 months after purchase. Consumables or defects causing a negligible effect on operation or value of the equipment are not covered. The warranty has to be proven by presentation of the original purchase receipt, on which the date of purchase and the unit-model are indicated.
5.2 Warranty handling
A faulty unit needs to be returned to a Topcom service centre including a valid purchase note. If the unit develops a fault during the warranty period, Topcom or its officially appointed service centre will repair any defects caused by material or manufacturing faults free of charge. Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or parts of the faulty units. In case of replacement, colour and model can be different from the original purchased unit. The initial purchase date shall determine the start of the warranty period. The warranty period is not extended if the unit is exchanged or repaired by Topcom or its appointed service centres.
5.3 Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or accessories not recommended by Topcom are not covered by the warranty. Topcom cordless phones are designed to work with rechargeable batteries only. The damage caused by the use of non-rechargeable batteries is not covered under warranty. The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during transportation. No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible. Any warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer or by unqualified, non-officially appointed Topcom service centres.
Warranty
ENGLISH
6 Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the normal household garbage but bring the product to a collection point for the recycling of electrical and electronic equipments. The symbol on the product, user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-using some parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area.
13
Cleaning
7 Cleaning
Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents.
14
Nederlands
1 Uw router aansluiten
Sluit uw router aan volgens onderstaande tekening.
STROOM: Sluit de 12 V DC stroomadapter aan op de stroompoort.
J De power LED op het frontpaneel begint te branden wanneer de stroomadapter is
aangesloten.
WAN: In de WAN-poort steekt u uw kabel/DSL-modem. De link LED op het
frontpaneel geeft aan dat de ADSL-lijn aangesloten is.
J De WAN LED gaat AAN als de ethernetkabel van het netwerk op de juiste manier
is aangesloten.
Poorten 1- 4: Hierop kunnen maximaal 4 pc's of andere netwerktoestellen
aangesloten worden.
J De LAN LEDs geven de status van de verbinding aan.
Reset/WPS-toets:
J Druk op de reset-toets en houd hem gedurende minstens 20 seconden ingedrukt om
de standaardinstellingen te laden. De standaardfabrieksinstellingen van het toestel worden geladen. Druk niet op de reset-toets tenzij u de huidige gegevens wilt wissen.
J Om de WPS (Wi-Fi Protected Setup) te starten, drukt u 4 seconden op de toets.
Uw router aansluiten
NEDERLANDS
15
De breedbandrouter instellen
2 De breedbandrouter instellen
Wij raden u met klem aan om tijdens de configuratie van de router een kabelverbinding te gebruiken. Maak een verbinding tussen uw computer en een van de ethernetpoorten van de router met een ethernetkabel.
J Open Internet Explorer en typ 192.168.1.1 in de URL-adresbalk.
– Internet Explorer URL-adresbalk –
Nu verschijnt het aanmeldingsscherm.
J Voer de gebruikersnaam en het wachtwoord in.
– Aanmeldingsscherm –
Standaard is de gebruikersnaam admin en het wachtwoord admin.
J Klik op OK om verder te gaan.
Voer nu de webmanagementpagina van uw draadloze router in
– Webmanagementpagina draadloze router –
16
De breedbandrouter instellen
J Selecteer Quick Setup Wizard (snelle setupwizard) om de configuratie te starten.
J Op het volgende scherm kunt u de Time Zone (tijdzone) instellen.
– Instellingen tijdzone –
1
Set Time Zone (tijdzone instellen): Selecteer uw regio.
2 Time Server Address (adres tijdserver): U kunt het IP-adres invoeren
van de tijdserver die uw voorkeur heeft, of u kunt de standaardinstelling laten staan.
3 Daylight Savings (zomertijd): Hier kunt u de zomertijd aanvinken. Voer
de begin- en einddatum van de zomertijd in.
J Klik op Next (volgende) om verder te gaan.
NEDERLANDS
– Type breedbandverbinding –
J Kies nu uw Broadband Connection Type (type breedbandverbinding):
17
De breedbandrouter instellen
o Cable modem (kabelmodem): Wordt gebruikt om kabelmodems aan te sluiten.
1 2 MAC Address: Sommige kabelinternetproviders bewaren het Mac-
JKlik op OK om verder te gaan.
o Fixed-IP xDSL: Wordt gebruikt voor een kabelmodem of DSL-bridge met een vast
IP-adres.
– IP-adresinfo voor kabelmodem –
Host Name: Voer indien nodig de hostnaam in.
adres van uw computer op hun server. In dit geval moet u het Mac-adres van uw computer kopiëren.
JKlik op Clone Mac Address om het Mac-adres van uw computer naar
de router te kopiëren.
– IP-adresinfo voor vast IP xDSL –
IP Address assigned by your Service Provider (IP-adres toegekend
1
door uw serviceprovider): Voer het vaste WAN IP-adres in.
2 Subnet Mask: Voer het subnetmasker in. 3 DNS Address: Voer het DNS-adres in. 4 Service Provider Gateway Address: Voer het Gateway IP-adres in.
JKlik op OK om verder te gaan.
18
De breedbandrouter instellen
o PPPoE xDSL: Wordt gebruikt voor DSL-bridge met PPPoE-verbinding.
– IP-adresinfo voor PPPoE xDSL –
1
Username (gebruikersnaam): Voer uw PPPoE-gebruikersnaam in.
2 Password (wachtwoord): Voer uw wachtwoord in. 3 Service Name: Voer de servicenaam in (bijvoorbeeld de naam van uw
internetprovider).
4 MTU: Voer de MTU-waarde in. (Laat de standaardwaarde op 1492
staan als deze waarde niet door uw internetprovider wordt gespecificeerd.)
5 Connection type (type verbinding):
Continuous (continu): De PPP-verbinding is altijd actief.
Connect on Demand (verbinden op verzoek): De PPP-
verbinding wordt tot stand gebracht wanneer een computer verbinding maakt met het internet. De PPP-verbinding wordt verbroken wanneer er geen internetverkeer is gedurende de Idle Time (tijd zonder activiteit) (minuten) die in het veld eronder staat vermeld.
Manual (handmatig): De PPP-verbinding wordt handmatig tot
stand gebracht / verbroken door te klikken op Connect / Disconnect (Verbinden/Verbreken).
JKlik op OK om verder te gaan.
NEDERLANDS
19
De breedbandrouter instellen
o PPTP xDSL: Wordt gebruikt voor een kabelmodel of DSL-bridge met PPTP-
verbinding. PPTP kan ook worden gebruikt wanneer de router is aangesloten op een ander LAN-netwerk.
– IP-adresinfo voor PPTP xDSL –
WAN-verbinding: DHCP-cliënt of vast IP-adres.
Obtain an IP address automatically (automatisch een IP-adres
verkrijgen):
1 Host Name: Voer indien nodig de hostnaam in. 2 MAC Address: Sommige kabelinternetproviders bewaren het MAC-
adres van uw computer op hun server. In dit geval moet u het Mac-adres van uw computer kopiëren. Klik op Clone Mac Address om het Mac­adres van uw computer naar de router te kopiëren.
Use the following IP address (Gebruik het volgende IP-adres): 1 IP address: Voer het vaste IP-adres in. 2 Subnet Mask:Voer het subnetmasker in. 3 Default Gateway (standaard Gateway): Voer het Gateway IP-adres in.
PPTP Settings (PPTP-instellingen): 1 User ID: Voer de PPTP-gebruikersnaam in.
20
De breedbandrouter instellen
2 Password (wachtwoord): Voer het PPTP-wachtwoord in. 3 PPTP Gateway: Voer de Gateway in. 4 Connection ID: Voer de ID van de verbinding in, indien nodig. 5 MTU: Voer de MTU-waarde in. (Laat de standaardwaarde op 1492
staan als deze waarde niet wordt gespecificeerd.)
6 BEZEQ-ISRAEL: Alleen voor Israël. 7 Connection Type (type verbinding):
Continuous (continu): De PPP-verbinding is altijd actief.
Connect on Demand (verbinden op verzoek): De PPP-
verbinding wordt tot stand gebracht wanneer een computer verbinding maakt met het internet. De PPP-verbinding wordt verbroken wanneer er geen internetverkeer is gedurende de Idle Time (tijd zonder activiteit) (minuten) die in het veld eronder staat vermeld.
Manual (handmatig): De PPP-verbinding wordt handmatig tot
stand gebracht / verbroken door te klikken op Connect / Disconnect (Verbinden/Verbreken).
JKlik op OK om verder te gaan.
o L2TP xDSL: Wordt gebruikt voor kabelmodems met L2TP-verbinding.
NEDERLANDS
– IP-adresinfo voor L2TP xDSL –
21
De breedbandrouter instellen
WAN-verbinding: DHCP-cliënt of vast IP-adres.
Obtain an IP address automatically (automatisch een IP-adres
verkrijgen):
1 Host Name: Voer indien nodig de hostnaam in. 2 MAC Address: Sommige kabelinternetproviders bewaren het MAC-
Use the following IP address (Gebruik het volgende IP-adres): 1 IP address: Voer het vaste IP-adres in. 2 Subnet Mask:Voer het subnetmasker in. 3 Default Gateway (standaard Gateway): Voer het Gateway IP-adres in.
L2TP Settings (L2TP-instellingen): 1 User ID: Voer de L2TP-gebruikersnaam in. 2 Password (wachtwoord): Voer het L2TP-wachtwoord in. 3 L2TP Gateway: Voer de Gateway in. 4 Connection ID: Voer de ID van de verbinding in, indien nodig. 5 MTU: Voer de MTU-waarde in. (Laat de standaardwaarde op 1492
6 Connection Type (type verbinding):
JKlik op OK om verder te gaan.
adres van uw computer op hun server. In dit geval moet u het Mac-adres van uw computer kopiëren. Klik op Clone Mac Address om het Mac­adres van uw computer naar de router te kopiëren.
staan als deze waarde niet wordt gespecificeerd.)
Continuous (continu): De PPP-verbinding is altijd actief.
Connect on Demand (verbinden op verzoek): De PPP-
verbinding wordt tot stand gebracht wanneer een computer verbinding maakt met het internet. De PPP-verbinding wordt verbroken wanneer er geen internetverkeer is gedurende de Idle Time (tijd zonder activiteit) (minuten) die in het veld eronder staat vermeld.
Manual (handmatig): De PPP-verbinding wordt handmatig tot
stand gebracht / verbroken door te klikken op Connect / Disconnect (Verbinden/Verbreken).
o Telstra Big Pond: niet voor Europa.
22
Controleer de status van de internetverbinding.
Nu is de snelle setupwizard voltooid.
J Klik op Apply (toepassen) om te eindigen.
De router zal nu opnieuw opstarten. Dit duurt ongeveer 60 seconden.
J Klik op OK als de opstartcyclus klaar is.
Ga terug naar de homepagina door te klikken op HOME rechts bovenaan in het scherm.
NEDERLANDS
3 Controleer de status van de internetverbinding.
De WAN-verbinding kan gecontroleerd worden op het scherm Status Info op de webpagina van de router.
Klik nu op Internet Connection (internetverbinding).
23
Het draadloos netwerk instellen
– Status internetverbinding –
J Alle informatie over de internetverbinding wordt zichtbaar: WAN IP-adres, Gateway,
DNS-servers ...
4 Het draadloos netwerk instellen
4.1 WPS
De Skyr@cer WBR 7201n ondersteunt de Wi-Fi Protected Setup (WPS)-functie. WPS stuurt de draadloze encryptie-instellingen automatisch van de router naar de draadloze cliënt die WPS ondersteunt (bijvoorbeeld Skyr@cer USB 4201n).
Dit betekent dat u de encryptie-instellingen niet hoeft in te voeren in uw draadloze adapter met WPS-functie als u verbinding wilt maken met uw router. Druk op de WPS-toets van de router, dan op de WPS-toets van de draadloze adapter en de beveiligde verbinding komt binnen enkele seconden tot stand.
Als u de draadloze encryptie-instellingen van de router niet instelt, maakt WPS automatisch een ingewikkelde encryptiesleutel (WPA-PSK) voor u aan.
Als u een draadloze cliënt adapter zonder WPS-functie gebruikt, raden wij u aan om de draadloze encryptie handmatig in te stellen.
Voor de automatische WPS-setup kunt u hoofdstuk 4.2 en 4.3 hieronder overslaan.
24
Loading...
+ 90 hidden pages