Topcom WBR 254G User Manual

0 (0)

Skyr@cer WBR 254G

QUICK INSTALLATION GUIDE

INSTALLATIE GIDS

GUIDE D’INSTALLATION RAPIDE

SCHNELLE INSTALLATIONSANLEITUNG

SNABBINSTALLATIONSGUIDE

HURTIG INSTALLATIONSGUIDE

HURTIGINSTALLASJON

PIKA-ASENNUSOHJEET

MANUAL DE USUARIO

MANUAL DO UTILIZADOR

V1.1

GB

The features described in this manual are published with reservation to modifications.

NL

De in deze handleiding beschreven mogelijkheden worden gepubliceerd onder voorbehoud

 

van wijzigingen.

FLes possibilités décrites dans ce manuel sont publiées sous réserve de modifications.

DDie in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden vorbehaltlich Änderungen publiziert.

SFunktionerna i denna bruksanvisning publiceras med reservation för ändringar.

DK

Vi forbeholder os retten til ændringer af de specifikationer, der er beskrevet

 

i denne brugsanvisning.

NFunksjoner beskrevet i denne manualen kan endres uten nærmere informasjon.

SF

Tässä ohjekirjassa julkaissut tiedot voivat muuttua ilman ennakkoilmoitusta.

ES

Las características descritas en este manual pueden ser objeto de futuras modificaciones.

PAs características descritas neste manual são publicadas sob reserva de poderem ser modificadas.

This product is made by Topcom Belgium

FOR USE IN: BELGIUM, HOLLAND,

GERMANY, SWEDEN, DENMARK, NORWAY,

FINLAND, SPAIN, ITALY, PORTUGAL, GREECE,

TURKEY

0560

This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC. The Declaration of conformity can be found on :

http://www.topcom.net/support/cedeclarations.php

Topcom Wireless Broadband Router WBR 254G

 

1.

THE CONNECTION PANEL

5

2.

CONFIGURING THE PC TO CONNECT TO THE CABLE/DSL

 

 

ROUTER

5

3.

VERIFY YOUR PC’S IP CONFIGURATION

6

4.

SETUP THE BROADBAND ROUTER

7

5.

CONNECTION STATUS

11

6.

ROUTER ADVANCED SETTINGS

12

7.

FIRMWARE UPDATE

12

8.

TOPCOM WARRANTY

13

SECURITY WARNING

To avoid that uninvited users will access your wireless network it is strongly recommended to activate WEP (or WPA if available) encryption of your wireless network.

4

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

1. THE CONNECTION PANEL

ENGLISH

POWER: The power port is to connect the 5V DC power adapter.

-The power LED on the front panel will go ON when the power adapter is connected.

WAN: The WAN Ethernet port is to connect your ASDL/Cable modem.

-The WAN LED will go ON if the network Ethernet cable is properly connected.

Ports 1- 4: This is to connect networked devices, such as PCs, ftp servers or anything else you want to put on your network.

-The LAN LED’s will indicate the connection status.

Reset Button: If you would like to load default settings, press the reset button and hold it for 5 ~ 6 seconds. It will load the factory default settings for the device. Do not press the reset button unless you want to clear the current data.

2.CONFIGURING THE PC TO CONNECT TO THE CABLE/DSL ROUTER

Remark

-The routers default IP address is: 192.168.1.1

-DHCP server is ON

If you do not wish to set a static IP address on your PC, you will need to configure your PC to accept the IP address that the router will provide.

1.Click Start button, select Settings, then Control Panel

2.Double-click the Network Icon

3.In the configuration windows, select the TCP/IP protocol line that has been associated with your network card/ adapter.

Topcom Wireless Broadband Router WBR 254G

5

Topcom Wireless Broadband Router WBR 254G

4.Click the Properties button, then choose the IP ADDRESS tab. Select Obtain an IP address automatically.

5.Then select DNS configuration tab to add DNS IP address. Select Disable DNS function. Press OK. You have completed the client settings.

6.After clicking OK, windows will ask you to restart the PC. Click Yes.

3. VERIFY YOUR PC’S IP CONFIGURATION

There are some tools which are great for finding out a computer’s IP configuration: MAC address and default gateway.

WINIPCFG (for windows 95/98)

Inside the windows 95/98/ME Start button, select Run and type winipcfg. In the example below this computer has a IP address of 192.168.1.100 and the default gateway is 192.168.1.1. The default gateway should be the broadband router IP address. The MAC address in windows 95/98 is called the Adapter Address.

NOTE: You can also type winipcfg in the DOS command.

6

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

IPCONFIG (for windows 2000/NT)

In the DOS command type IPCONFIG and press Enter. Your PC IP information will be displayed as shown below.

ENGLISH

- IPCONFIG / RENEW will renew the IP address, gateway and DNS.

Windows XP

Click the right mouse key on your network adapter and select Status

The support screen will display the IP information.

4. SETUP THE BROADBAND ROUTER

When your PC has a valid IP address, you should be able to go to the router setup web page. Open Internet Explorer or Netscape Navigater and goto address: 192.168.1.1

Now the login screen will appear.

Topcom Wireless Broadband Router WBR 254G

7

Topcom Wireless Broadband Router WBR 254G

Enter the username and password.

- By default the username is admin and the password is admin. Now you enter the web management of your Broadband Router.

The setup wizard will automatically appear:

-Click Next to proceed

In next screen you can change the login password (admin) to your own password.

-Click Next to proceed

In next screen you can select your Time Zone

- Click Next to proceed

8

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

Now you can change the LAN settings:

ENGLISH

-The LAN IP address and Subnet mask can be changed.

-The router DHCP server can be Disabled / Enabled

-The DHCP range can be set.

-Click Next to proceed

-Select your Connection Type

-Click Next to proceed

-Obtain IP automatilally (DHCP client): this connection is mostly used for connecting the WBR 254G to a cable modem.

-Fixed IP address: for connections with fixed WAN IP address.

-enter the WAN IP, Subnet Mask, Gateway and DNS addresses.

-Click Next to proceed.

-PPPoE to obtain IP automatically: mostly used for connecting the WBR 254G to an ADSL-Ethernet Bridge with PPPoE dial up.

Topcom Wireless Broadband Router WBR 254G

9

Topcom Wireless Broadband Router WBR 254G

-enter username and password (twice)

-Click Next to proceed.

-PPPoE with a fixed IP address: PPPoE connection with fixed WAN IP address.

-enter username, password (twice) and WAN IP address

-Click Next to proceed.

-PPTP: for setting up a VPN connection: in this case the WBR 254G WAN port is connected at the LAN site of another

existing network !

-enter the VPN IP address, Subnet Mask and Gateway.

-enter the VPN Server IP address, PPTP Account and Password (twice).

-Click Next to proceed.

Now you can setup the basic settings for the Wireless part.

-Select Enable to enable the Wireless LAN

-Choose an SSID and a Channel for your wireless network. Please make sure that the wireless clients will operate on the same SSID and the same channel to make wireless data communication possible.

-Click Next to proceed.

10

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

Now the setup is complete

ENGLISH

-Click Restart to save and restart the router.

When all settings are saved a new screen will pop up:

-Click Close

The Setup Wizard is completed !

Remark:

Next time you go to the router Web page the Setup Wizard will appear again. This can be disabled:

-select No and click update

-now the wizard will not appear again when you access the router Web page.

5.CONNECTION STATUS

The WAN connection can be checked in the Status screen on the router Web page.

For PPPoE connection:

- The connection can be disconnected by clicking Disconnect. You can connect by clicking the Connect key

Topcom Wireless Broadband Router WBR 254G

11

Topcom Wireless Broadband Router WBR 254G

For DHCP client:

- The WAN IP address can be released by clicking the DHCP Release key. DHCP Renew will renew the IP address.

Remark:

After each action, the router will jump to following screen:

-The action will be shown.

-please click Back to return to menu.

6.ROUTER ADVANCED SETTINGS

You can enter the menu for advanced settings. Please refer to the full user guide on the provided CD for more details.

7. FIRMWARE UPDATE

When a new firmware is released, it will be published on the Topcom website ( www.topcom.net) in the support –> downloads section. Please download the image and go to Tools in the router menu. Now select the Firmware page

- click Browse to select the downloaded firmware image and click the Upgrade key.

12

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

8. TOPCOM WARRANTY

1. WARRANTY PERIOD

The Topcom units have a 24-month warranty period. The warranty period starts on the day the new unit is purchased. The warranty on batteries is limited to 6 months after purchase. Consumables or defects causing a negligible effect on operation or value of the equipment are not covered.

The warranty has to be proven by presentation of the original purchase receipt, on which the date of purchase and the unit-model are indicated.

2. WARRANTY HANDLING

A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.

If the unit develops a fault during the warranty period, Topcom or its officially appointed service centre will repair any defects caused by material or manufacturing faults free of charge.

Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging the faulty units or parts of the faulty units. In case of replacement, colour and model can be different from the original purchased unit.

The initial purchase date shall determine the start of the warranty period. The warranty period is not extended if the unit is exchanged or repaired by Topcom or its appointed service centres.

3. WARRANTY EXCLUSIONS

Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or accessories not recommended by Topcom are not covered by the warranty.

Topcom cordless phones are designed to work with rechargeable batteries only. The damage caused by the use of non-rechargeable batteries is not covered under warranty.

The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during transportation.

No warranty can be claimed if the serial number on the units has been changed, removed or rendered illegible.

Any warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer or by unqualified, nonofficially appointed Topcom service centres.

The CE symbol indicates that the unit complies with the essential requirements of the R&TTE directive.

ENGLISH

Topcom Wireless Broadband Router WBR 254G

13

 

Topcom Wireless Broadband Router WBR 254G

1.

HET VERBINDINGSPANEEL

15

2.

DE PC CONFIGUREREN OM DE KABEL/DSL-ROUTER AAN TE SLUITEN

15

3.

CONTROLEER DE IP-CONFIGURATIE VAN UW PC

16

4.

SETUP VAN DE BROADBAND ROUTER

18

5.

VERBINDINGSSTATUS

21

6.

GEAVANCEERDE ROUTERINSTELLINGEN

23

7.

FIRMWARE UPDATE

23

8.

TOPCOM GARANTIE

23

VEILIGHEIDSWAARSCHUWING

Om te verhinderen dat ongewenste gebruikers zich toegang tot uw draadloze netwerk verschaffen, raden we u ten zeerste aan de WEP- (of WPA indien voorhanden) encryptie van uw draadloze netwerk in te schakelen.

14

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

1. HET VERBINDINGSPANEEL

NEDERLANDS

POWER: De power port dient om de 5V DC stroomadapter aan te sluiten.

-De power LED op het frontpaneel licht op wanneer de stroomadapter aangesloten is.

WAN: De WAN Ethernet port dient om uw ASDL/Kabel modem aan te sluiten.

-De WAN LED licht op wanneer de netwerk Ethernet kabel correct aangesloten wordt.

Ports 1- 4: Die dienen om netwerkapparaten als PC’s, ftp servers of andere netwerkapparaten aan te sluiten.

-De LAN LED’s geven de status van de aansluiting weer.

Reset Knop: Als u de standaard instellingen wilt laden, houd de reset knop dan 5 ~ 6 seconden ingedrukt. Op die manier worden de standaard begininstellingen voor het apparaat geladen. Druk niet op de reset knop tenzij u de huidige instellingen wilt wissen.

2. DE PC CONFIGUREREN OM DE KABEL/DSL-ROUTER AAN TE SLUITEN

Opmerking

-Het standaard IP-adres van de router is: 192.168.1.1

-De DHCP-server staat AAN

Als u geen statisch IP-adres wilt instellen op uw PC, moet u uw PC zo configureren dat hij het IP-adres aanneemt dat de router geeft.

1.Klik op Start, selecteer Instellingen , dan Configuratiescherm

2.Dubbelklik op het Netwerk-pictogram

3.In het configuratievenster, selecteert u de regel met het TCP/IP-protocol dat is ingesteld voor uw netwerkkaart/ adapter.

Topcom Wireless Broadband Router WBR 254G

15

Topcom Wireless Broadband Router WBR 254G

4.Klik op Eigenschappen, kies vervolgens het tabblad IP-ADRES. Selecteer Automatisch een IP-adres verkrijgen.

5.Selecteer vervolgens het tabblad DNSconfiguratie om het DNS IP-adres toe te voegen. Selecteer DNS-functie uitschakelen. Druk op OK. De client-instellingen zijn voltooid.

6.Nadat u op OK heeft geklikt, zal Windows u vragen om de PC opnieuw te starten. Klik op Ja.

3. CONTROLEER DE IP-CONFIGURATIE VAN UW PC

Er bestaan tools waarmee u de IP-configuratie van een computer makkelijk kunt vinden: MAC-adres en standaard gateway.

• WINIPCFG (voor Windows 95/98)

Klik in Windows 95/98/ME op de Start-knop, selecteer Uitvoeren en tik winipcfg in. In het onderstaande voorbeeld heeft de computer als IP-adres 192.168.1.100 en de standaard gateway is 192.168.1.1. De standaard gateway moet het IP-adres van de breedband router zijn. Het MAC-adres in Windows 95/98 wordt het adapteradres genoemd.

OPMERKING: U kunt ook winipcfg in het DOS-venster invoeren.

16

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

NEDERLANDS

• IPCONFIG (voor Windows 2000/NT)

In het DOS-venster tikt u IPCONFIG in en drukt u op Enter. De IP-informatie van uw PC wordt weergegeven zoals hieronder geïllustreerd.

Met - IPCONFIG / RENEW worden het IP-adres, de gateway en de DNS vernieuwd.

• Windows XP

Klik met de rechtermuisknop op uw netwerkadapter en selecteer Status

Op het support-scherm verschijnt de IP-informatie.

Topcom Wireless Broadband Router WBR 254G

17

Topcom Wireless Broadband Router WBR 254G

4. SETUP VAN DE BROADBAND ROUTER

Wanneer uw PC een geldig IP adres heeft, moet u naar de webpagina kunnen gaan waar u de router kunt instellen. Open Internet Explorer of Netscape Navigator en ga naar adres: 192.168.1.1

Het login scherm verschijnt nu.

Voer gebruikersnaam en wachtwoord in.

- Als beginwaarde is de gebruikersnaam ingesteld op admin, het standaardpaswoord is admin. Nu krijgt u toegang tot het webbeheer van uw Broadband Router.

De setup wizard zal automatisch verschijnen:

-Klik Next om door te gaan

In het volgende scherm kunt u uw wachtwoord voor de login (admin) veranderen.

- Klik Next om door te gaan

18

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

In het volgende scherm kunt u uw Tijdzone selecteren

NEDERLANDS

-Klik Next om door te gaan

Nu kunt u de LAN instellingen wijzigen:

-Het LAN IP adres en Subnet mask kunnen gewijzigd worden.

-De DHCP server van de router kan uitgeschakeld / ingeschakeld worden

-Het DHCP bereik kan ingesteld worden.

-Klik Next om door te gaan

-Selecteer uw verbindingstype

-Klik Next om door te gaan

-Verkrijg automatisch IP (DHCP client): deze verbinding wordt meestal gebruikt om de WBR 254G met een kabelmodem te verbinden.

-Fixed IP address: voor verbindingen met fixed WAN IP adres.

Topcom Wireless Broadband Router WBR 254G

19

Topcom Wireless Broadband Router WBR 254G

-voer WAN IP, Subnet Mask, Gateway en DNS adressen in.

-Klik Next om door te gaan.

-PPPoE om IP automatisch te verkrijgen: deze verbinding wordt meestal gebruikt om de WBR 254G met een ADSL-Ethernet Bridge met PPPoE te verbinden.

-Voer gebruikersnaam en wachtwoord (tweemaal)in

-Klik Next om door te gaan.

-PPPoE met een fixed IP adres: PPPoE verbinding met fixed WAN IP adres.

-Voer gebruikersnaam, wachtwoord (tweemaal) en WAN IP adres in

-Klik Next om door te gaan.

-PPTP: Om een VPN verbinding in te stellen: in dit geval is de WBR 254G WAN port verbonden met de LAN site van een ander bestaand netwerk !

-voer VPN IP adres, Subnet Mask en Gateway in.

-voer VPN Server IP adres, PPTP Account en wachtwoord(tweemaal) in.

-Klik Next om door te gaan.

Nu kan U de draadloze instellingen uitvoeren :

20

Topcom Wireless Broadband Router WBR 254G

 

Topcom Wireless Broadband Router WBR 254G

 

 

- Het draadloze gedeelte inschakelen (Enable) of uitschakelen (Disable)

 

 

- Voer de SSID in. Zorg ervoor dat de draadloze clients ingesteld zijn op dezelfde SSID als de

 

 

Draadloze Breedband Router.

 

 

- Voer het kanaalnummer in. (Channel)

 

 

- Klik Next om verder te gaan.

NEDERLANDS

De setup is nu afgerond

 

-Klik Restart om de instellingen te bewaren en de router te herstarten.

Wanneer alle instellingen bewaard zijn komt een nieuw scherm te voorschijn:

-Klik Close

De Setup Wizard is afgerond!

Opmerking:

De volgende keer dat u naar de webpagina van de router gaat, verschijnt de Setup Wizard opnieuw. U kunt dit voorkomen:

-selecteer No en klik update

-nu verschijnt de wizard niet meer wanneer u naar de webpagina van de router gaat.

5.VERBINDINGSSTATUS

De WAN verbinding kan gecontroleerd worden in het statusscherm op de webpagina van de router.

Topcom Wireless Broadband Router WBR 254G

21

Topcom Wireless Broadband Router WBR 254G

Voor PPPoE verbinding:

-De verbinding kan verbroken worden door te klikken op Disconnect. U kunt verbinding maken door te klikken op de toets Connect

Voor DHCP client:

- Het WAN IP adres kan vrijgegeven worden door te klikken op de DHCP Release toets. DHCP Renew zal het IP adres vernieuwen.

Opmerking:

Na elke actie, zal de router naar het volgende scherm springen:

-De actie zal getoond worden.

-gelieve op Back te klikken om terug te keren naar het menu.

22

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

6. GEAVANCEERDE ROUTERINSTELLINGEN

U kunt het menu voor geavanceerde instellingen openen. Gelieve voor meer details de volledige handleiding op de meegeleverde CD te raadplegen.

7. FIRMWARE UPDATE

Wanneer er een nieuwe versie van de firmware uitgebracht wordt, vindt u er alles over op de Topcom website ( www.topcom.net) in de support -> downloads sectie. Gelieve de image te downloaden en naar Tools te gaan in het routermenu. Selecteer nu de Firmware pagina

- Klik op Browse om de gedownloade firmware image te selecteren en klik op de Upgrade toets.

8. TOPCOM GARANTIE

1. GARANTIEPERIODE

Op de Topcom-toestellen wordt een garantie van 24 maanden verleend. De garantieperiode begint op de dag waarop het nieuwe toestel wordt gekocht. De garantie op batterijen is beperkt tot 6 maanden na aankoop. Kleine onderdelen of defecten die een verwaarloosbaar effect hebben op de werking of waarde van het toestel zijn niet gedekt door de garantie.

De garantie moet worden bewezen door voorlegging van het aankoopbewijs waarop de datum van aankoop en het toesteltype staan.

2. AFWIKKELING VAN GARANTIECLAIMS

Een defect toestel moet, samen met een geldig aankoopbewijs, worden teruggestuurd naar een Topcom-hersteldienst. Als het toestel tijdens de garantieperiode een defect vertoont, zal Topcom of diens officieel erkende hersteldienst eventuele defecten te wijten aan materiaalof productiefouten gratis herstellen.

Topcom zal naar keuze haar garantieverplichtingen vervullen door defecte toestellen of onderdelen van defecte toestellen ofwel te herstellen ofwel te vervangen. In het geval dat het toestel wordt vervangen, kan de kleur en het model verschillend zijn van het oorspronkelijk gekochte toestel.

De oorspronkelijke aankoopdatum is bepalend voor het begin van de garantieperiode. De garantieperiode wordt niet verlengd als het toestel wordt vervangen of hersteld door Topcom of diens officieel erkende hersteldienst.

3. GARANTIEBEPERKINGEN

Schade of defecten te wijten aan onoordeelkundig gebruik of bediening en schade te wijten aan het gebruik van nietoriginele onderdelen of accessoires die niet zijn aanbevolen door Topcom, worden niet gedekt door de garantie. Topcom draadloze telefoons mogen enkel met oplaadbare batterijen worden gebruikt. Schade te wijten aan het gebruik van niet-oplaadbare batterijen is niet gedekt door de garantie.

De garantie dekt geen schade te wijten aan externe factoren, zoals bliksem, water en brand, noch enige transportschade.

Er kan geen garantie worden ingeroepen als het serienummer op het toestel is gewijzigd, verwijderd of onleesbaar gemaakt.

Garantieclaims zijn ongeldig indien het toestel hersteld, gewijzigd of aangepast werd door de koper of door nietgekwalificeerde, niet-officieel erkende Topcom-hersteldienst.

Het toestel voldoet aan de basiseisen van de R&TTE-richtlijn. Dit wordt bevestigd door de CE-markering.

NEDERLANDS

Topcom Wireless Broadband Router WBR 254G

23

Topcom Wireless Broadband Router WBR 254G

 

1.

LE PANNEAU DE CONNEXION

25

2.

CONFIGURATION DU PC POUR LA CONNEXION AU ROUTEUR

 

 

CABLE/DSL

25

3.

VÉRIFIEZ LA CONFIGURATION IP DE VOTRE PC

26

4.

PARAMÉTRER LE ROUTEUR À BANDE LARGE

28

5.

STATUT DE CONNEXION

31

6.

PARAMÈTRES AVANCÉS DU ROUTEUR

32

7.

MISE À JOUR DU FIRMWARE

32

8.

GARANTIE TOPCOM

33

AVERTISSEMENT DE SÉCURITÉ

Pour éviter que des utilisateurs non invités accèdent à votre réseau sans-fil, il est fortement recommandé d’activer le cryptage WEP (ou WPA si disponible) de votre réseau sans-fil.

24

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

1. LE PANNEAU DE CONNEXION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FRANÇAIS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power: Le port d’alimentation doit être connecté à l’adaptateur 5V DC.

 

 

- La DEL power de la face avant s’allume lorsque l’adaptateur est connecté.

 

WAN: Le port WAN Ethernet doit être connecté au modem ASDL/Câble.

 

 

- La DEL WAN LED s’allume lorsque le câble réseau Ethernet est correctement connecté.

 

Ports 1- 4: Ces ports servent à connecter les appareils mis en réseau tels que des PC, des serveurs ftp ou tout

 

 

autre appareil que vous désirez mettre en réseau.

 

 

- Les DEL LAN indiquent le statut de connexion.

 

Bouton RESET: Si vous souhaitez revenir aux paramètres par défaut, appuyez sur le bouton de réinitialisation

 

 

et maintenez-le enfoncé pendant 5 à 6 secondes. Les paramètres d’usine par défaut de l’appareil seront chargés.

 

 

Appuyez uniquement sur ce bouton si vous souhaitez effacer les données actuelles.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.CONFIGURATION DU PC POUR LA CONNEXION AU ROUTEUR CABLE/DSL

Remarque

-L’adresse IP par défaut du routeur est: 192.168.1.1

-Le serveur DHCP est ON

Si vous ne souhaitez pas régler une adresse statique sur votre PC, vous devrez configurer votre PC pour accepter l’adresse IP que le routeur fournit.

1.Cliquez sur le bouton Start, sélectionnez Paramètres, et ensuite Panneau de configuration.

2.Double-cliquez sur l’icône Réseau

3.Dans la fenêtre de configuration, sélectionnez la ligne Protocole TCP/IP qui a été associé à votre carte/ adaptateur réseau.

Topcom Wireless Broadband Router WBR 254G

25

Topcom Wireless Broadband Router WBR 254G

4.Cliquez sur le bouton Propriétés, ensuite choisissez l’onglet ADRESSE IP . Sélectionnez Obtenir une adresse IP automatiquement .

5.Sélectionnez ensuite l’onglet configuration DNS pour ajouter Adresse IP DNS . Sélectionnez Désactiver fonction DNS . Appuyez sur OK. Vous avez achevé le paramétrage client.

6.Après avoir cliqué sur OK, windows vous demandera de relancer l’ordinateur. Cliquez sur Yes.

3. VÉRIFIEZ LA CONFIGURATION IP DE VOTRE PC

Certains outils sont excellents pour découvrir la configuration IP de votre ordinateur: Adresse MAC et passerelle par défaut.

• WINIPCFG (pour windows 95/98)

Dans le menu du bouton Start de windows 95/98/ME, sélectionnez Exécuter et tapez winipcfg. Dans l’exemple cidessous, cet ordinateur a l’adresse IP de 192.168.1.100 et la passerelle par défaut est 192.168.1.1. La passerelle par défaut doit être l’adresse IP des routeurs à bande large. L’adresse MAC dans windows 95/98 est appelée l’adresse Adapter.

NOTE: Vous pouvez également taper winipcfg dans la ligne de commande DOS.

26

Topcom Wireless Broadband Router WBR 254G

Topcom WBR 254G User Manual

Topcom Wireless Broadband Router WBR 254G

• IPCONFIG (pour windows 2000/NT)

Dans la ligne de commande DOS, tapez IPCONFIG et appuyez Enter. Les informations IP de votre PC sont affichées comme indiqué ci-dessous.

- IPCONFIG / RENEW renouvellera l’adresse IP, la passerelle et le DNS.

• Windows XP

Cliquez avec le bouton droit de la souris sur votre adaptateur réseau et sélectionnez Status.

L’écran de support affiche les informations IP.

FRANÇAIS

Topcom Wireless Broadband Router WBR 254G

27

Topcom Wireless Broadband Router WBR 254G

4. PARAMÉTRER LE ROUTEUR À BANDE LARGE

Lorsque votre PC dispose d’une adresse IP valide, vous êtes en mesure d’aller sur la page web de paramétrage du routeur.

Ouvrez Internet Explorer ou Netscape Navigater et allez à l’adresse: 192.168.1.1

L’écran de login apparaît.

Entrez vos nom d’utilisateur et mot de passe.

-Par défaut, le nom d’utilisation et le mot de passe sont admin.

Àprésent, vous entrez dans la partie gestion internet de votre routeur à bande large.

L’outil de paramétrage apparaît automatiquement:

-Cliquez sur Next pour poursuivre

Dans l’écran suivant, vous pouvez remplacer le mot de passe du login (admin) pour le vôtre.

-Cliquez sur Next pour poursuivre

Dans l’écran suivant, vous pouvez sélectionner votre fuseau horaire " Time Zone "

28

Topcom Wireless Broadband Router WBR 254G

Topcom Wireless Broadband Router WBR 254G

-Cliquez sur Next pour poursuivre

Vous pouvez maintenant modifier les paramètres LAN:

FRANÇAIS

-L’adresse IP LAN et le masque de sous-réseau peuvent être modifiés.

-Le serveur DHCP du routeur peut être désactivé / activé

-Il est possible de régler la plage DHCP.

-Cliquez sur Next pour poursuivre

-Sélectionnez le type de connexion

-Cliquez sur Next pour poursuivre

-Obtenez votre IP automatiquement (client DHCP) : Cette connexion est généralement utilisée pour connecter le WBR 254G à un modem câble.

-Adresse IP fixe: Pour les connexions avec adresse IP WAN fixe.

-entrez l’adresse IP WAN, le masque de sous-réseau, la passerelle et les adresses DNS.

-Cliquez sur Next pour poursuivre.

-PPPoE pour obtenir une IP automatiquement: Généralement utilisé pour connecter le WBR 254G à un pont ADSL-Ethernet avec numérotation PPPoE.

Topcom Wireless Broadband Router WBR 254G

29

Topcom Wireless Broadband Router WBR 254G

-entrez le nom d’utilisateur et le mot de passe (deux fois)

-Cliquez sur Next pour poursuivre.

-PPPoE avec une adresse IP fixe: Connexion PPPoE avec adresse IP WAN fixe.

-entrez le nom d’utilisateur et le mot de passe (deux fois)et l’adresse IP WAN

-Cliquez sur Next pour poursuivre.

-PPTP: Pour établir une connexion VPN: Dans ce cas, le port WBR 254G WAN est connecté au site LAN d’un autre réseau existant !

-entrez l’adresse VPN IP, le masque de sous-réseau et la passerelle.

-entrez l’adresse IP du serveur VPN, le compte PPTP et le mot de passe (deux fois).

-Cliquez sur Next pour poursuivre.

Section sans-fil :

-Enable (activer) ou Disable (désactiver) la partie sans-fil.

-Entrez le SSID. Assurez-vous que les clients sans-fil sont réglés sur le meme SSID que le routeur Wireless Broadband.

-Entrez le numéro de canal. (Channel)

30

Topcom Wireless Broadband Router WBR 254G

Loading...
+ 74 hidden pages