TOA Electronics CPEI 25150 User Manual

3.22 Mb

User Guide

Sprint 4G Desktop Modem

www.sprint.com

©2009 Sprint. SPRINT and the logo are trademarks of Sprint. Other marks are the property of their respective owners.

12/3/09

Table of Contents

Section 1: Getting to Know Your Motorola CPEi 25150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Powerful Features in a Single Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Your Motorola CPEi 25150 4G Desktop Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Front of Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Side Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Operating Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Section 2: Installation and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installing Your 4G Desktop Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Before You Begin Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 User Interface Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Logging In to the Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Setup Wizard and Authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Section 3: Basic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Personalize Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Password Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Device Time Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Device Name Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Restore Factory Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Internet Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

WiMAX Security Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Internet Protocol Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Firewall Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Dynamic DNS Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Status Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Network Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Section 4: Advanced Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Port Forwarding Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Basic Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Forwarding Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Local Address Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

DHCP Server Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Lease Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Lease Reservation Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Control Panel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Software Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

Certificate Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

System Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

About Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Section 5: Configuring TCP/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Configuring TCP/IP in Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Configuring TCP/IP in Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Section 6: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

LED indicators are Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

A Computer Cannot Log On to the Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

Cannot Connect to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

Additional Troubleshooting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

Section 7: Important Safety and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

RF Exposure Compliance and Guidelines Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . 31

FCC Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Caring for the Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Disposal of Motorola Equipment in EU Countries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Disposal of Motorola Equipment in Non-EU Countries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

CMM Disclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

Copyrights and Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Usage and Disclosure Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Section 1: Getting to Know Your Motorola CPEi 25150

Introduction

Thank you for purchasing the Motorola CPEi 25150 4G desktop modem. The CPEi 25150 allows you to connect to the wireless world easily and seamlessly without complicated installation and setup procedures.

The CPEi 25150 4G desktop modem provides:

Convenience — with easy plug and play functionality. Flexible connectivity. Compact design.

Performance — dual integrated antennas, optimized for rich indoor multipath environments. Best in Class Radio Performance. Reliable indoor coverage. High throughput.

Control — remote management capability allows easy detection and authentication once the unit is setup. Robust security.

Figure 1: CPEi 25150 4G Desktop Modem

This product is subject to change. Not all features described in this Sprint 4G Desktop modem user guide are available on all models.

For the most recent documentation, visit the Product Documentation page on www.motorola.com.

Section 1: Getting to Know Your Motorola CPEi 25150

1

Powerful Features in a Single Unit

The CPEi 25150 4G desktop modem provides the following features:

WiMAX Authentication

WAN DHCP Client

LAN DHCP Server

Router Functions

Firewall Protection

Port Forwarding

Your Motorola CPEi 25150 4G Desktop Modem

Front of Modem

The modem contains an array of five green LED indicators at the top of the unit. The LEDs indicate the status of the unit and signal strength for easy adjustment during setup.

 

LED Indicator Interface

 

 

 

Item

 

Description

 

 

 

Power Status

 

The LEDs are:

 

 

On - power to the modem is on.

 

 

Off - power to the modem is off.

 

 

 

Initializing Status

 

The center LED flashes when the modem is

 

 

initializing.

 

 

 

Signal Strength

 

If all LEDs on the bar are lit, full signal is

 

 

being received.

 

 

If all LEDs are off, the modem is unplugged.

 

 

LEDs will display a chase pattern when the

 

 

device is attempting to locate and connect

 

 

to the network.

 

 

 

Note: There is no reset button on this device. If you want to reset the modem, pull out the power cord and plug it in again.

Section 1: Getting to Know Your Motorola CPEi 25150

2

Side Panel

The side panel of the unit contains the Ethernet Port, the Power Connection Port, and a Ethernet Port LED.

Figure 2: CPEi 25150 Side Panel

Side Panel Ports

Description

 

 

Ethernet

Ethernet Port

 

 

Power

AC Power Connector

 

 

Ethernet LED

The LED is:

 

On - Ethernet Port is connected.

 

Off - Ethernet Port is not connected.

 

Blinking in 5-10 second intervals - the

 

Ethernet cable is not connected to the

 

computer.

 

 

Operating Information

Operating temperature for this unit is 0-40°C (32-104°F)

AC Power Rating for this unit is:

110 ~ 240 AC

Section 1: Getting to Know Your Motorola CPEi 25150

3

Section 2: Installation and Setup

What’sintheBox?(page4)

InstallingYour4GDesktopModem(page5)

InitialConfiguration(page6)

What’s in the Box?

Before you begin installation, check that you have received the following items with your modem:

Modem

 

Get Started Guide,

 

Ts & Cs, and

PowerCord/AC Adapter

regulatory info.

Ethernet Cable

Figure 3: Inbox Contents

CPEi 25150 Box Contents

 

 

Item

Description

 

 

Modem

CPEi 25150 4G desktop modem unit

 

 

Power Cord/AC Adapter

Power cord that connects the modem to an

 

electrical outlet

 

 

Ethernet Cable

Cable to connect the Ethernet port on your

 

modem to your PC or laptop computer

 

ethernet port

 

 

Get Started Guide, Ts & Cs, and regulatory

Guide to demonstrate the setup and initial

info.

Web connection; legal documentation

 

 

Section 2: Installation and Setup

4

Installing Your 4G Desktop Modem

Perform the following tasks before attaching the power cord or powering up the unit:

Rotate the base of the modem to be in a perpendicular position.

Connect one end of the Ethernet cable to the Ethernet port of the modem. Stand the modem vertically on a flat surface.

Connect the other end of the same Ethernet cable to an Ethernet port on your PC or laptop computer.

Plug the power cord/AC adapter into an AC power outlet.

The modem will automatically turn on.

Connect the power adapter to the power connector on the side of the unit.

Note: Do NOT mount the horizontally and do NOT block the air ventilation holes at the top of the unit.

YourComputer

Modem

Ethernet Port

Ethernet Cable

Ethernet

Port

 

Power

PowerCord

Connector

 

Figure 4: Installation Diagram

Section 2: Installation and Setup

5

Initial Configuration

Before You Begin Configuration

Some settings on your computer must be verified or changed to ensure that your computer configuration can support the CPEi 25150 desktop modem.

Call Sprint to confirm that your modem is activated.

Verify that the IP address and DNS settings are automatically generated in your Local Area connection of your Internet Protocol (TCP/IP) properties. Refer to the chapter titled “Configuring TCP/IP” for information on how to do this.

Ensure you know which protocol you will need to enter in the Setup Wizard procedure. This will either be EAP-TLS or EAP-TTLS. If EAP-TTLS is to be used, Sprint will provide you a Username and Password.

User Interface Overview

A Web-based Graphical User Interface (GUI) is used to configure the features of your modem. The top portion of the window displays buttons for the six main menus available in the interface: Personalize, Internet, Status, Port Forwarding, Local Address, and Control Panel. Each active menu contains varying tabs to control specific features. In the example below, the Personalize menu contains tabs for Password (shown), Device Time,

Device Name, and Restore Factory Settings.

Figure 5: Main Menu Sample

Section 2: Installation and Setup

6

There are six main menus in the GUI:

Menu Tab

Description

 

 

Personalize

Use this menu to set up your password,

 

device time and device name. You can also

 

abandon your personal settings by clicking

 

Restore Factory Settings.

 

 

Internet

Use this menu to configure internet

 

connection settings, including

 

Authentication, Protocol, Firewall, and

 

Dynamic DNS.

 

 

Status

Use this menu to display network status,

 

including WiMAX, Internet, LAN, and Device

 

Information.

 

 

Port Forwarding

Use this menu to enable Universal Plug and

 

Play (UPnP) Internet Gateway Device (IGD)

 

profile to allow certain Windows

 

applications to setup the port forwarding

 

rule dynamically when NAT is enabled on

 

this device.

 

 

Local Address

Use this menu to display the IP Address and

 

netmask address in the local network.

 

 

Control Panel

Use this menu to manage the device

 

software.

 

 

The following buttons appear at the bottom of each configuration page:

Button

Function

 

 

Apply

Saves your changes. If you restart your

 

modem without saving your changes, all

 

changes are lost. After the device restarts,

 

the last saved configuration is used.

 

 

Undo

Clears your changes on the current page

 

and returns to the main menu. Once you

 

click Apply, the Undo button will NOT clear

 

your changes.

 

 

Next

Confirms the current setting and moves on

 

to the next screen.

 

 

Refresh

Manually updates current status page.

 

 

Auto Refresh

Updates automatically without needing you

 

to refresh manually.

 

 

Wizard

Starts Setup Wizard manually if your

 

modem did not run the setup program

 

automatically.

 

 

Note: Illustrations in this manual containing an image of what you see on your computer screen are for reference purposes only. Values shown in the illustrations in this manual may be different from what you see on your computer screen.

Section 2: Installation and Setup

7

Logging In to the Modem

Use the following procedure to log in to the modem:

1.On a computer that is connected to the modem, open a Web browser.

2.Enter the IP address: http://192.168.15.1 into Address field in order to gain access to your modem.

– or –

In the Address or Location field, type http://mywimax. and press Enter to display the login screen. (You must enter the period [.] after the address to access the login screen.)

If you cannot access the modem, refer to “Section 5: Configuring TCP/IP” on page 22 for more information.

3.The Welcome to Motorola WiMAX CPE screen will be displayed and will prompt you for a password.

4.In the Password field, type the password (default is motorola).

5.Click Login.

6.First time users will see a pop-up box that states: “The Wizard application will guide you through for the first time configuration. Click the OK button to continue.”

7.Click OK to launch the wizard application.

Setup Wizard and Authentication

Step1-ChangePassword

Once you have launched the setup wizard, you will be prompted to change your password. Motorola recommends using a password to protect your home network and modem. Passwords are case-sensitive.

Tochangeyourpassword:

1.Ensure the Enable Login Password Protection check box is selected.

2.Enter a New Login Password in the box. Passwords can be no more than 20 characters in length.

3.Re-type your new password in the Confirm New Login Password box.

4.Click Next.

Step2-DeviceTime

This screen allows you to set the time zone and to enable Daylight Savings Time (when applicable) for your location.

1.Select the appropriate time zone for your location from the drop down box.

2.Select the Auto Adjust for Daylight Savings Time check box if you live in a region that observes Daylight Savings Time. (This check box is selected by default.)

3.Click Next.

Section 2: Installation and Setup

8

Step3-WiMAXSecurity

The WiMAX Security tab will contain your authentication method. Check with Sprint to determine whether a user name and password are required for authentication purposes.

If the Authentication Method is EAP-TLS:

Enter the Realm information supplied by Sprint.

Click Apply when finished.

If the Authentication Method is EAP-TTLS/MS-CHAPv2:

Enter the User name and Password as supplied by Sprint.

Enter the Realm information as provided by Sprint.

Click Apply when finished.

Congratulations!YouhavenowcompletedthesetupofyourWiMAXconnection.

Click OK on the Congratulations! dialog box.

A status screen will appear showing Network status. When your modem successfully connects to the Internet, you will see the actual link status and statistics. Note that the screen shown in this illustration is an example of the screen. Use the scroll bar on your menu screen to view all the status items that are reported by your unit.

Figure 6: Status Screen

Section 2: Installation and Setup

9

Section 3: Basic Configuration

PersonalizeMenu(page10)

InternetMenu(page12)

StatusMenu(page14)

Once the setup has been completed, you can log in to your modem from any computer on your home network by typing the device name in the address bar. The default device name is mywimax. or 192.168.15.1.

This section describes the Personalize, Internet, and Status menus.

Personalize Menu

The Personalize menu provides the following tabs:

Password

Device Time

Device Name

Restore Factory Settings

Figure 7: Personalize Menu (Password Tab)

Section 3: Basic Configuration

10

Password Tab

The Password tab allows you to enable/disable password protection. You can also change your password here. Be sure to click Apply when finished.

Password Tab Fields

Field or Button

Description

 

 

Enable Login Password Protection

Selecting this check box will require login

 

Password Protection.

 

 

New Login Password

Enter your new password here. Maximum

 

20 characters. Passwords are case-

 

sensitive.

 

 

Confirm New Login Password

Re-enter your new password here, exactly

 

as entered above.

 

 

Device TimeTab

The Device Time tab allows you to establish the time zone for your location. It also allows you to automatically adjust for Daylight Savings Time if necessary. Be sure to click Apply when finished.

Device Time Tab Fields

Field or Button

Description

 

 

Current Local Time

Shows the current local date and time.

 

 

Time Zone

Select your local time zone from the drop

 

down box.

 

 

Auto Adjust for Daylight Saving Time

Select this check box if your location

 

observes Daylight Savings Time. (Default is

 

checked.)

 

 

Device Name Tab

The Device Name tab allows you to rename your modem. This is the Device Name you enter on an Internet browser address bar to access your modem. Be sure to click Apply when finished.

 

 

Device Name Tab Fields

 

 

 

 

 

Field or Button

 

Description

 

 

 

 

 

New Device Name

 

Enter the new name for the modem.

 

 

 

Maximum 20 characters.

 

 

 

 

Restore FactorySettings Tab

 

 

Restore Factory Settings Tab Fields

Field or Button

Description

 

 

Restore Factory Settings

Selecting this check box will restore the

 

modem to factory default settings. The

 

device will restart when you click Apply.

 

 

Section 3: Basic Configuration

11

Internet Menu

The Internet menu provides the following tabs:

WiMAX Security

Internet Protocol Tab

Firewall

Dynamic DNS

Figure 8: Internet Menu Screen (WiMAX Security Tab)

WiMAX Security Tab

The WiMAX Security tab will contain your authentication method. Check with Sprint to determine whether a user name and password are required for authentication purposes.

WiMAX Tab Fields

Field or Button

Description

 

 

Authentication Method

Drop down box allows you to select either

 

EAP-TLS (default) or EAP-TTLS/MS-

 

CHAPv2.

 

 

User Name (EAP-TTLS/MS-CHAPv2 only)

Enter the User Name supplied by Sprint (if

 

applicable).

 

 

Password (EAP-TTLS/MS-CHAPv2 only)

Enter the Password supplied by Sprint (if

 

applicable).

 

 

Realm

Supplied by Sprint (if applicable).

 

 

If your authentication method is EAP-TLS, then a User Name and Password are not necessary.

Click Apply to apply any customized settings.

Section 3: Basic Configuration

12

Internet Protocol Tab

Please check with Sprint to determine if these settings are required. If you are unsure of the settings, leave the default values set and click Apply.

If Sprint has instructed you to change any of these settings, be sure to click Apply when you are finished.

Firewall Tab

A firewall helps to protect your home network from unauthorized access. It will also help to manage authorized access from the Internet to your modem.

 

Firewall Tab Fields

 

 

 

Field or Button

 

Description

 

 

 

Enable Firewall

 

Select this check box to enable the firewall

 

 

for your home network.

 

 

 

Enable Web Login from Internet

 

(Grayed out if Enable Firewall is not

 

 

selected.)

 

 

Selecting this check box enables you to

 

 

access your modem from a network other

 

 

than your own.

 

 

 

Web Login Port from Internet

 

Choose a port number to connect to when

 

 

logging in from a network other than your

 

 

own. The default is 8080.

 

 

 

Enable ping from Internet

 

Enables the modem to respond to a ping

 

 

from the Internet. This option would be

 

 

enabled to allow testing only. Do not leave

 

 

this enabled.

 

 

 

The Enable Web Login from Internet and the Enable Ping from Internet options are by default turned off. This is because these options allow unknown users to access your computer via the internet, and this is not safe.

You may need to turn these options on if there is a problem with your modem or Internet connection. Turning these options on will allow Sprint access to your computer to troubleshoot any problems. Remember to enter the number of the port that is allowed to access your computer if these options are turned on.

Be sure to click Apply once you are finished.

Section 3: Basic Configuration

13

Dynamic DNS Tab

Dynamic Domain Name Service (DDNS) allows a user with a non-static IP address to keep their domain name associated with an ever changing IP address. As an example, DDNS is used when you are hosting your own website.

Dynamic DNS Tab Fields

 

Field or Button

Description

 

 

 

 

Enable DDNS

Select this check box to Enable DDNS.

 

 

(Default is unchecked.)

 

 

 

 

DDNS Service Provider

Select the DDNS Service Provider that you

 

 

belong to from the drop down box.

 

 

 

Be sure to click Apply once you are finished.

 

Status Menu

The Status menu provides the following tab:

Network

Figure 9: Status Menu Screen (Network Tab)

Network Tab

The Network tab will provide any status associated with your WiMAX wireless broadband connection.

Section 3: Basic Configuration

14

Section 4: Advanced Configuration

PortForwardingMenu(page15)

LocalAddressMenu(page17)

ControlPanelMenu(page20)

Port Forwarding Menu

Port forwarding enables you to direct incoming traffic to specific LAN hosts (computers on your network) based on the protocol and port number. It is used to play Internet games or provide local services (such as web hosting) for a LAN group.

The Port Forwarding menu contains the following tabs:

Basic

Forwarding

Figure 10: Port Forwarding Menu Screen (Basic Tab)

Section 4: Advanced Configuration

15

Basic Tab

Port Forwarding Basic Tab Fields

 

Field or Button

Description

 

 

 

 

Enable UPnP IGD

Enables Universal Plug and Play (UPnP)

 

 

Internet Gateway Device (IGD) profile to

 

 

allow certain Windows applications to setup

 

 

the port forwarding rule dynamically when

 

 

NAT is enabled on this device.

 

 

 

 

DMZ IP Address

Enter the DMZ IP Address.

 

 

 

Be sure to click Apply once you have made changes.

 

Forwarding Tab

Click ADD to create additional Port Forwarding rules.

 

Forwarding Tab Fields

 

 

 

Field or Button

 

Description

 

 

 

Select

 

Select a box when you want to delete the

 

 

specific row.

 

 

 

Protocol

 

Select TCP (Transmission Control Protocol)

 

 

or UDP (User Datagram Protocol).

 

 

 

WAN Port Start

 

Enter the beginning port range for external

 

 

network access.

 

 

 

WAN Port End

 

Enter the ending port range for external

 

 

network access.

 

 

 

LAN IP Address

 

Enter the IP address to host the service in

 

 

the dotted-decimal format.

 

 

 

LAN Port Start

 

Enter the beginning port range for internal

 

 

network access.

 

 

 

LAN Port End

 

Enter the ending port range for internal

 

 

network access.

 

 

 

Enabled

 

Check to enable specific port forwarding.

 

 

 

Be sure to click Apply once you have made changes.

Section 4: Advanced Configuration

16

Local Address Menu

The Local Address menu allows you to configure your Local Area Network (LAN) connections. It contains the following tabs:

DHCP Server

Lease Status

Lease Reservation

Figure 11: Local Address Menu Screen (DHCP Server Tab)

Section 4: Advanced Configuration

17

DHCP Server Tab

The DHCP Server tab enables Dynamic Host Configuration Protocol (DHCP) server functionality on the LAN, allowing the router to dynamically assign lease IP addresses to clients that connect to it from the local network.

 

DHCP Server Tab Fields

 

 

 

Field or Button

 

Description

 

 

 

Enable DHCP Server

 

If selected, the DHCP server on the gateway

 

 

assigns IP addresses to the computers and

 

 

other hosts on your network if they have

 

 

DHCP enabled. By default, the gateway

 

 

server is enabled. If there is another DHCP

 

 

server running on your network (on another

 

 

router), you must disable one of the DHCP

 

 

servers.

 

 

If not selected, you must carefully configure

 

 

the IP address, Subnet Mask, and DNS

 

 

settings of every host on your network. Do

 

 

not assign the same IP address to more

 

 

than one host. Your gateway must be on the

 

 

same subnet as the other hosts.

 

 

 

DHCP Server IP Address

 

Enter the default port forwarding LAN Client

 

 

IP Address.

 

 

 

DHCP Starting IP Address

 

Sets the first IP address assigned by the

 

 

DHCP server, in dotted-decimal format. It

 

 

must be greater than the IP address value of

 

 

the gateway. For example, if the IP address

 

 

of the gateway is 192.168.15.1 (default), the

 

 

starting IP address must be 192.168.15.2 (or

 

 

higher).

 

 

 

DHCP Ending IP Address

 

Sets the final IP address assigned by the

 

 

DHCP server. If the DHCP server runs out of

 

 

DHCP addresses, users cannot access

 

 

network resources. If this happens, increase

 

 

the Ending IP (to the limit of 254) or reduce

 

 

the Lease Time.

 

 

 

DHCP Lease Time

 

Sets the time, in seconds, that a network

 

 

computer remains connected to the

 

 

gateway using its current assigned IP

 

 

address. At the end of this time, the DHCP

 

 

server renews the lease or assigns the

 

 

computer a new IP address. The default is 1

 

 

hour. The maximum is about 278 hours.

 

 

 

Be sure to click Apply once you have made changes.

Section 4: Advanced Configuration

18

Lease Status Tab

The Lease Status tab in the Local Address menu displays the active DHCP leases since the last reboot.

 

Lease Status Tab Fields

 

 

 

Field or Button

 

Description

 

 

 

Client Host Name

 

Displays the client host name. The Name

 

 

field is limited to 20 characters (only 5

 

 

appear in display).

 

 

 

MAC Address

 

Media Access Control (MAC) address.

 

 

 

IP Address

 

Shows the IP Address for each active lease.

 

 

 

Remaining Lease Duration

 

Shows the amount of time, in seconds,

 

 

remaining in the lease.

 

 

 

Be sure to click Apply once you have made changes.

Lease Reservation Tab

This tab allows you to manage the lease reservation so that the same client receives the same IP address each time.

Lease Reservation Tab Fields

Field or Button

Description

 

 

Select

Select this box if you want to delete an

 

established lease reservation. Be sure to

 

click Delete once you have selected your

 

exception to be deleted.

 

 

Client Host Name

Enter the client host name. The Name field

 

is limited to 20 characters (only 5 appear in

 

display).

 

 

MAC Address

Media Access Control (MAC) address. Enter

 

the MAC address of the device.

 

 

IP Address

Enter the IP address that you want assigned

 

to the MAC Address.

 

 

Enabled

Checking this box enables the lease

 

reservation.

 

 

Click Add to create an additional Lease Reservation.

To delete a Lease Reservation, select the reservation to be removed and click Delete. Be sure to click Apply once you have made changes.

Section 4: Advanced Configuration

19

Control Panel Menu

The Control Panel menu allows you to view and update your software information. It contains the following tabs:

Software

Certificate

System

About

Figure 12: Control Panel Menu Screen (Software Tab)

Software Tab

The Software tab manages the software on your modem. It is also where you can upgrade device software.

 

Software Tab Fields

 

 

 

Field or Button

 

Description

 

 

 

Browse

 

Use this button to browse your computer for

 

 

additional software packages.

 

 

 

Upgrade

 

Once you have located the software

 

 

package/update you would like to add to

 

 

your device.

 

 

 

View

 

Use this button if you are unable to see the

 

 

Available Software List.

 

 

 

Install

 

Click this button to begin installation of the

 

 

software you have selected.

 

 

 

Uninstall

 

Click this button to uninstall a selected

 

 

software package.

 

 

 

Section 4: Advanced Configuration

20

Certificate Tab

The Certificate tab is where you manage the certificates that are stored on the modem.

 

Certificate Tab Fields

 

 

 

Field or Button

 

Description

 

 

 

Browse

 

Use this button to locate a certificate file on

 

 

your computer.

 

 

 

Import

 

Click this button to install a certificate once

 

 

you have located the certificate file on your

 

 

computer.

 

 

 

Remove

 

Click this button to remove a selected

 

 

certificate.

 

 

 

System Tab

This tab allows you to manage additional features of your modem.

 

System Tab Fields

 

 

 

Field or Button

 

Description

 

 

 

Language Used in User Interface

 

Select the desired language for the user

 

 

interface. The default language is English.

 

 

 

Enable WiMAX Radio Interface

 

Check this box to enable the WiMAX Radio

 

 

Interface.

 

 

 

Auto Refresh Interval

 

Enter, in seconds, the interval for status Auto

 

 

Refresh. Valid range is 10 seconds - 60

 

 

seconds. The default value is 10 seconds.

 

 

 

Rebootstrap EMS

 

Check this box to reconnect the device with

 

 

the EMS.

 

 

NOTE: Only perform this function under the

 

 

supervision of a Customer Support

 

 

Representative.

 

 

 

Be sure to click Apply once you have made changes.

About Tab

The About tab displays basic properties of your modem such as: Part Number, Model ID, Hardware Version, Serial Number, and the WiMAX MAC Address.

Section 4: Advanced Configuration

21

Section 5: Configuring TCP/IP

ConfiguringTCP/IPinWindows2000(page22)

ConfiguringTCP/IPinWindowsXP(page26)

This section contains two examples of configuring TCP/IP in a Windows environment. Most computers already have the TCP/IP configuration enabled. Use the following procedures to verify that the configuration is set up.

All client computers on your network must be configured for TCP/IP (the protocol that controls communication among computers).

Note: Follow the instructions in your computer user manual for other Operating Systems.

Configuring TCP/IP in Windows 2000

1.On the Windows desktop, click Start.

2.Select Settings and then Control Panel from the pop-up menus to display the Control Panel window:

Figure 13: Windows Control Panel

Section 5: Configuring TCP/IP

22

3.Double-click the Network and Dial-up Connections icon to display the Network and Dial-up Connections window:

Figure 14: Network and Dial-Up Connections

4.Click Local Area Connection number icon. The value of number varies from system to system. The Local Area Connection number Status window is displayed:

Figure 15: Local Area Connection

Section 5: Configuring TCP/IP

23

5.Click Properties. Information similar to the following window is displayed:

Figure 16: Properties

6.If Internet Protocol (TCP/IP) is in the list of components, TCP/IP is installed. You can skip to step 11.

7.If Internet Protocol (TCP/IP) is not in the list, click Install. The Select Network Component Type window is displayed:

Figure 17: Select Network Component Type

Section 5: Configuring TCP/IP

24

8.Click Protocol on the Select Network Component Type window and click Add. The Select Network Protocol window is displayed:

Figure 18: Select Network Protocol

Note: You may have to use the scroll bar to locate the Internet Protocol (TCP/IP) setting.

9.Click Internet Protocol (TCP/IP).

10.Click OK. The Local Area Connection number Properties window is re-displayed.

11.Be sure the box next to Internet Protocol (TCP/IP) is checked.

12.Click Properties. The Internet Protocol (TCP/IP) Properties window is displayed:

Figure 19: Internet Protocol (TCP/IP) Properties

13.Be sure Obtain IP address automatically and Obtain DNS server address automatically are selected.

14.Click OK to accept the TCP/IP settings.

15.Click Close to close the Local Area Connection number Properties window.

16.Click OK.

Section 5: Configuring TCP/IP

25

17. If prompted to restart the computer and click OK again.

Configuring TCP/IP in Windows XP

1.On the Windows desktop, click Start to display the Start window:

Figure 20: Windows XP Start Window

2.Click Control Panel to display the Control Panel window. The display varies, depending on your Windows XP view options. If the display is a Category view as shown below, continue with step 3. Otherwise, skip to step 5.

Figure 21: Control Panel (Category View)

Section 5: Configuring TCP/IP

26

3.Click Network and Internet Connections to display the Network and Internet Connections window:

Figure 22: Network and Internet Connections

4.Click Network Connections. Skip to Step 6.

5.If a classic view similar to below is displayed, double-click Network Connections to display the LAN or High-speed Internet connections.

Figure 23: Control Panel (Classic View)

Section 5: Configuring TCP/IP

27

6.Right-click the Local Area Connection. If more than one connection is displayed, be sure to select the one for your network interface.

Figure 24: Network Connections

7.Select Properties from the pop-up menu to display the Local Area Connection Properties window:

Figure 25: Local Area Connection Properties

8.On the Local Area Connection Properties window, select Internet Protocol (TCP/IP) if it is not selected.

Section 5: Configuring TCP/IP

28

9.Click Properties to display the Internet Protocol (TCP/IP) Properties window:

Figure 26: Internet Protocol (TCP/IP) Properties

Be sure Obtain IP address automatically and Obtain DNS server address automatically are selected.

Click OK to close the TCP/IP Properties window.

Section 5: Configuring TCP/IP

29

Section 6: Troubleshooting

This page provides basic troubleshooting procedures for your CPEi 25150 4G desktop modem.

LED indicators are Off

Check that the AC power adapter is properly plugged into the electrical outlet and into the modem.

A Computer Cannot Log On to the Modem

Check that the Ethernet cable is properly connected to the modem unit and the computer.

Cannot Connect to the Internet

Check the modem connection status from the Web interface. Refer to the Connection Status section to verify the connection status.

If the desktop modem connection is down, and the gateway has not received an IP for more than 5 minutes, re-run the set up wizard.

To restart the modem, unplug the power and re-connect.

Additional Troubleshooting Help

Visit sprint.com/supportor contact a Sprint representative at 1-866-639-9565 for additional help.

Section 6: Troubleshooting

30

Section 7: Important Safety and Legal Information

Your Motorola WiMAX Wireless Broadband Gateway is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to RF electromagnetic energy.

This Product complies with the following RF energy exposure standards and guidelines:

United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J

American National Standards Institute (ANSI)/ Institute of Electrical and Electronic Engineers (IEEE) C95 1-2005

Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition

International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998

Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999

RF Exposure Compliance and Guidelines Operating Instructions

To comply with FCC RF energy exposure requirements, this Gateway desktop transmitter should be operated at a minimum separation distance of 20 cm from all persons.

For additional information on exposure requirements or other training information, visit http://www.motorola.com/rfhealth.

FCC Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Section 7: Important Safety and Legal Information

31

This Gateway desktop transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Industry Canada Statement

This device complies with RSS-193, and RSS-Gen of the Industry Canada Rules. Operation is subject to the following two conditions:

this device may not cause interference and

this device must accept any interference, including interference that may cause undesired operation of the device

This device has been designed to operate with an antenna having a maximum gain of 7 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p) is not more than that permitted for successful communications.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

ICRadiationExposureStatement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Caring for the Environment

The following information is provided to enable regulatory compliance with the European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic Equipment (WEEE) when using Motorola Networks equipment in EU countries.

Disposal of Motorola Equipment in EU Countries

This product is compliant with the requirements of the European Union Restriction of Hazardous Substances (EU RoHS) directive.

Please do not dispose of Motorola Networks equipment in landfill sites.

In the EU, Motorola Networks in conjunction with a recycling partner will ensure that equipment is collected and recycled according to the requirements of EU environmental law.

Disposal of Motorola Equipment in Non-EU Countries

In non-EU countries, dispose of Motorola Networks equipment in accordance with national and regional regulations.

Section 7: Important Safety and Legal Information

32

CMM Disclosure

The China Management Methods (CMM) Disclosure Table is intended only to communicate compliance with China requirements; it is not intended to communicate compliance with EU RoHS or any other environmental requirements.

Figure 27: CMM Disclosure Information

Copyrights and Trademarks

Notice

While reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be entirely reliable.

However, no responsibility is assumed for inaccuracies or omissions. Motorola, Inc. reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Motorola, Inc. does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others.

It is possible that this publication may contain references to, or information about Motorola products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Motorola intends to announce such Motorola products, programming, or services in your country.

Copyrights

This instruction manual, and the Motorola products described in this instruction manual may be, include or describe copyrighted Motorola material, such as computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Motorola and its licensors contained herein or in the Motorola products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either

Section 7: Important Safety and Legal Information

33

directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, as arises by operation of law in the sale of a product.

Usage and Disclosure Restrictions

LicenseAgreements

The software described in this document is the property of Motorola, Inc and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.

CopyrightedMaterials

Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Motorola, Inc.

HighRiskMaterials

Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities). Motorola and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities.

Trademarks

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.

© 2009 Motorola, Inc.

Section 7: Important Safety and Legal Information

34