TOA Electronics BG-1060, BG-1030, BG-1015, BG-1120 User Manual

0 (0)
OPERATING INSTRUCTIONS
MIXER POWER AMPLIFIER BG-1015
BG-1030
BG-1060
BG-1120
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
SAFETY PRECAUTIONS
Be sure to read the instructions in this section carefully before use.
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
WARNING
CAUTION
2
IMPORTANT SAFETY INSTRUCTIONS
· Be sure to read these instructions in this section carefully before use.
· Heed all warnings and follow all instructions.
· Keep these instructions handy for reference at any time.
Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
Only use the attachments or accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Do not use this apparatus near water.
Clean only with a dry cloth.
When Installing the Unit
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
3
Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
When the Unit is in Use
Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest TOA dealer. Make no further
attempt to operate the unit in this condition as this
may cause fire or electric shock.
· If you detect smoke or a strange smell coming
from the unit.
· If water or any metallic object gets into the unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
· If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest TOA dealer.
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
When Installing the Unit
Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
When the Unit is in Use
Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
Make sure that the volume control is set to
minimum position before power is switched on.
Loud noise produced at high volume when power is
switched on can impair hearing.
Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in a fire.
Contact your TOA dealer as to the cleaning. If dust
is allowed to accumulate in the unit over a long
period of time, a fire or damage to the unit may
result.
If dust accumulates on the power supply plug or in
the wall AC outlet, a fire may result. Clean it
periodically. In addition, insert the plug in the wall
outlet securely.
Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a fire or electric
shock.
CAUTION
ATTENTION
L'appareil ne doit pas être exposé aux éclaboussures ou écoulements et tous objets remplis de liquide, tels
que vases, ne doivent pas être sur l’appareil.
4
TABLE OF CONTENTS
1. GENERAL DESCRIPTION ............................................................................. 5
2. FEATURES .......................................................................................................... 5
3. NOMENCLATURE AND FUNCTIONS
Front ......................................................................................................................... 6
Rear .......................................................................................................................... 7
4. INPUT CONNECTIONS ................................................................................... 8
5. OUTPUT CONNECTIONS .............................................................................. 9
6. PLUG-IN MODULE INPUT PORT
6.1. Module Installation ............................................................................................ 9
6.2. Module Selector Switch Settings ...................................................................... 10
7. EQUIPMENT SETTINGS
7.1. Mute Function
7.1.1. Mute operation A .................................................................................... 10
7.1.2. Mute operation B .................................................................................... 11
7.2. TEL Input Impedance Selection ....................................................................... 11
7.3. AUX, PROGRAM, MODULE (BGM) Output Selection ..................................... 12
7.4. Phantom Power On/Off Setting for Microphone Input ...................................... 12
7.5. Changing MIC and PROGRAM Input Types
7.5.1. MIC input ................................................................................................ 12
7.5.2. Program input ........................................................................................ 13
8. INSTALLATION ................................................................................................. 13
9. RACK MOUNTING ........................................................................................... 13
10. CONTROL SETTINGS .................................................................................... 14
11. DIMENSIONAL DIAGRAM ............................................................................ 14
12. BLOCK DIAGRAM ........................................................................................... 15
13. SPECIFICATIONS ............................................................................................ 16
Accessories ............................................................................................................. 16
Optional products .................................................................................................... 16
5
1. GENERAL DESCRIPTION
TOA's BG-1015, BG-1030, BG-1060, and BG-1120 Mixer Power Amplifiers can mix up to a total of 5
independent input signals. Power output is rated at 15 W for the BG-1015, 30 W for the BG-1030, 60 W for the
BG-1060, and 120 W for the BG-1120. All units are ideal for use in sound systems requiring small power
outputs.
2. FEATURES
3 balanced inputs, 1 unbalanced input, and 1 module input
Phantom-powered microphone input
Telephone paging input
Compatible with all 900 Series modules (except for mute buss functions)
Wide frequency response ranging from 50 Hz to 20 kHz
Low distortion and low noise level
Excellent output regulation
Three different speaker outputs: 4 , 25 V, and 70 V
MOH (Music On-Hold) output: 1 V, 600
1W output terminal: 8
Independent bass and treble controls
Input and output terminals for connection of signal processors
Two different mute functions
Overcurrent and thermal protection circuitries
Compact and lightweight
Desktop or 19" rack mountable
Loading...
+ 11 hidden pages