thomann Varytec LED Profile 150W 3200K User Manual

LED Profile 150W 3200K

LED spotlight

User manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [e-mail]
Internet: www.thomann.de

16.10.2017, ID: 373481

Table of contents

1 General notes............................................................................................................................................... 6

1.1 Further information........................................................................................................................... 7

1.2 Notational conventions.................................................................................................................... 8

1.3 Symbols and signal words............................................................................................................... 8

2 Safety instructions.................................................................................................................................. 11

3 Features....................................................................................................................................................... 16

4 Installation.................................................................................................................................................. 17

5 Starting up.................................................................................................................................................. 21

6 Connections and controls................................................................................................................... 24

7 Operating.................................................................................................................................................... 29

7.1 Starting the device........................................................................................................................... 29

7.2 Main menu.......................................................................................................................................... 29

7.3 Menu overview................................................................................................................................. 31

7.4 Functions in DMX mode................................................................................................................ 31

8 Technical specifications....................................................................................................................... 32

Table of contents

LED Profile 150W 3200K

3

LED spotlight

9 Plug and connection assignments.................................................................................................. 33

10 Troubleshooting...................................................................................................................................... 34

11 Cleaning....................................................................................................................................................... 36

12 Protecting the environment.............................................................................................................. 37

Table of contents

4

LED Profile 150W 3200K
LED spotlight

LED Profile 150W 3200K

5

LED spotlight

1 General notes

This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.

Our products are subject to a process of continuous development. Thus, they are subject to
change.

General notes

6

LED Profile 150W 3200K
LED spotlight

1.1 Further information

On our website (www.thomann.de) you will find lots of further information and details on the
following points:

Download This manual is also available as PDF file for you to download.

Keyword search

Use the search function in the electronic version to find the topics of
interest for you quickly.

Online guides

Our online guides provide detailed information on technical basics
and terms.

Personal consultation For personal consultation please contact our technical hotline.

Service

If you have any problems with the device the customer service will
gladly assist you.

General notes

LED Profile 150W 3200K

7

LED spotlight

1.2 Notational conventions

This manual uses the following notational conventions:

The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.

Texts and values displayed on the device are marked by quotation marks and italics.

Examples: ‘24ch’ , ‘OFF’.

1.3 Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.

Letterings

Displays

General notes

8

LED Profile 150W 3200K
LED spotlight

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or
serious injury if it is not avoided.

WARNING! This combination of symbol and signal word indicates a pos-

sible dangerous situation that can result in death or serious
injury if it is not avoided.

NOTICE! This combination of symbol and signal word indicates a pos-

sible dangerous situation that can result in material and
environmental damage if it is not avoided.

Warning signs Type of danger

Warning – high-voltage.

Warning – suspended load.

General notes

LED Profile 150W 3200K

9

LED spotlight

Warning signs Type of danger

Warning – danger zone.

General notes

10

LED Profile 150W 3200K
LED spotlight

2 Safety instructions

This device is intended to be used as an electronic illumination effect using LED technics. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con­ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.

This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.

Intended use

Safety instructions

LED Profile 150W 3200K

11

LED spotlight

DANGER!
Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!

Never let children unattended use electrical devices.

DANGER!
Electric shock caused by high voltages inside

Within the device there are areas where high voltages may be present. Never
remove any covers.

There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or

damaged.

Safety

Safety instructions

12

LED Profile 150W 3200K
LED spotlight

DANGER!
Electric shock caused by short-circuit

Do not modify the mains cable or the plug. Failure to do so could result in electric
shock/death or fire. If in doubt, seek advice from a registered electrician.

WARNING!
Eye damage caused by high light intensity

Never look directly into the light source.

WARNING!
Risk of epileptic shock

Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.

Safety instructions

LED Profile 150W 3200K

13

LED spotlight

NOTICE!
Risk of fire

Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.

NOTICE!
Operating conditions

This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.

Safety instructions

14

LED Profile 150W 3200K
LED spotlight

NOTICE!
Power supply

Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.

Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.

Safety instructions

LED Profile 150W 3200K

15

LED spotlight

3 Features

Special features of the device:

n

1 × LED warm white, 150 W

n

Colour temperature 3200 K

n

Operable in stand-alone mode or DMX

n

Operating via buttons and display on the unit

n

Robust and space-saving plastic housing with mounting bracket

n

Suitable for use in clubs, bars, theatres, exhibitions, etc.

Features

16

LED Profile 150W 3200K
LED spotlight

4 Installation

Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.

WARNING!
Risk of injury caused by falling objects

Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.

Installation

LED Profile 150W 3200K

17

LED spotlight

NOTICE!
Risk of overheating

Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).

NOTICE!
Use of stands

When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.

Installation

18

LED Profile 150W 3200K
LED spotlight

NOTICE!
Possible data transmission errors

For error-free operation make use of dedicated DMX cables and do not use ordi­nary microphone cables.

Never connect the DMX input or output to audio devices such as mixers or ampli­fiers.

You can install the unit in hanging or standing position. When in use, the device must always
be attached to a solid surface or an approved truss. Use the openings provided on the two­piece bracket for attaching.

Always work from a stable platform whenever installing, moving or servicing the unit. In doing
so, the area underneath the unit must be cordoned off.

The safety-rope must be attached to the bracket.

Mounting options

Installation

LED Profile 150W 3200K

19

LED spotlight

Please note that this device must not be connected to a dimmer.

Installation

20

LED Profile 150W 3200K
LED spotlight

5 Starting up

Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.

Starting up

LED Profile 150W 3200K

21

LED spotlight

Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the first DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼ W).

Connections in DMX mode

Starting up

22

LED Profile 150W 3200K
LED spotlight

When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.

Connections in master/slave
mode

Starting up

LED Profile 150W 3200K

23

LED spotlight

6 Connections and controls

Connections and controls

24

LED Profile 150W 3200K
LED spotlight

1 Indicator LED for the DMX signal. Flashes when a DMX signal is present.
2 Display
3 [ENTER]

Confirms a selected value.

4, 5 [UP], [DOWN]

Increases / decreases the displayed value by one.

6 [MENU]

Calls up the main menu or a submenu.

7 [DMX OUT]

DMX output

8 Locking screws for the mounting bracket.
9 [DMX IN]

DMX input

10 Power cord

Connections and controls

LED Profile 150W 3200K

25

LED spotlight

11 Fuse holder. Should the fuse have blown, disconnect the unit from the power supply and replace the fuse with a new

fuse of the same type.
12 Main switch. Turns the device on and off.
13 Bracket for floor placement or hanging.
14 Handle for swivelling the unit.

Connections and controls

26

LED Profile 150W 3200K
LED spotlight

Connections and controls

LED Profile 150W 3200K

27

LED spotlight

15 Individually operable shutter slider
16 Locking screw for the focus

17, 18 Screws for fine adjustment of the focus. For adjusting loosen the screws on both sides and move the lens to the

desired position.
19 Holder for colour foils or filters

Connections and controls

28

LED Profile 150W 3200K
LED spotlight

7 Operating

7.1 Starting the device

Connect the device to the power supply to start operation. The device is immediately opera­tional and operates in the last mode with the settings last selected.

7.2 Main menu

Press [MENU] to open the main menu. Use [UP] or [DOWN] to select the desired parameter or to
change the respectively displayed value. When the display shows the desired parameter or
value press [ENTER] to enter the respective sub menu or to confirm a new value. Press [MENU]
to return to the previous menu level without changes.

Menu control

Operating

LED Profile 150W 3200K

29

LED spotlight

Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘Addr’ . Use [UP] or
[DOWN] to select the sub menu item ‘ADDR’ and confirm with [ENTER]. Now you can set the

number of the first DMX channel to be used by the device (DMX address). Use [UP] or [DOWN]
to select a value between 1 and 512.

Confirm by pressing [ENTER]. Use [MENU] to return to the parent menu.
To return to the parent menu without changes, press [MENU] without prior confirmation.
Make sure that this number matches the configuration of your DMX controller.

Press [MENU]. Press [UP] or [DOWN] repeatedly until the display shows ‘L1xx’ . Press [ENTER].
Use [UP] or [DOWN] to select a value between ‘L100’ (lampe off) and ‘L115’ (full brightness).

This setting takes effect only when the device is not operated under DMX control. When the
display shows the desired value, press [ENTER] to confirm the selection and then [MENU] to
return to the parent menu. To return to the parent menu without changes, press [MENU]
without prior confirmation.

DMX address

Dimmer setting

Operating

30

LED Profile 150W 3200K
LED spotlight

7.3 Menu overview

7.4 Functions in DMX mode

Channel Value Function

1 0 … 255 Intensity warm white (0 % to 100 %)

Operating

LED Profile 150W 3200K

31

LED spotlight

8 Technical specifications

Illuminant 1 × LED warm white, 150 W
Dispersion angle 26 °
Number of DMX channels 1 channel
Operating supply voltage

100 – 240 V 50/60 Hz
Power consumption 175 W
Fuse 5 mm × 20 mm, 5 A, 250 V, fast-acting
Dimensions (W × H × D) 270 mm × 290 mm × 590 mm
Weight 6.5 kg

Technical specifications

32

LED Profile 150W 3200K
LED spotlight

9 Plug and connection assignments

This chapter will help you select the right cables and plugs to connect your valuable equip­ment so that a perfect light experience is guaranteed.

Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug
fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a
short circuit or ‘just’ a not working light show!

The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please
refer to the drawing and table below for the pin assignment of a suitable XLR plug.

Pin Configuration

1 Ground, shielding
2 Signal inverted (DMX–, ‘cold signal’)
3 Signal (DMX+, ‘hot signal’)

Introduction

DMX connections

Plug and connection assignments

LED Profile 150W 3200K

33

LED spotlight

10 Troubleshooting

NOTICE!
Possible data transmission errors

For error-free operation make use of dedicated DMX cables and do not use ordi­nary microphone cables.

Never connect the DMX input or output to audio devices such as mixers or ampli­fiers.

In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:

Troubleshooting

34

LED Profile 150W 3200K
LED spotlight

Symptom Remedy

The unit does not work, no
light.

Check the mains connection and the fuse.

No response to the DMX con­troller.

1. Check the DMX ports and cables for proper connection.

2. Check the address settings and the DMX polarity.

3. Try using another DMX controller.

4. Check to see if the DMX cables run near or alongside to
high voltage cables that may cause damage or interfer­ence to DMX interface circuits.

If the procedures recommended above do not succeed, please contact our Service Center. You
can find the contact information at www.thomann.de.

Troubleshooting

LED Profile 150W 3200K

35

LED spotlight

11 Cleaning

Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the
light output. The frequency of cleaning depends on the operating environment: wet, smoky or
particularly dirty surroundings can cause more accumulation of dirt on the optics of the
device.

n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122).
n

Always dry the parts carefully.

The fan grids of the device must be cleaned on a regular basis to remove dust and dirt. Before
cleaning, switch off the device and disconnect AC-powered devices from the mains. Use a lint­free damp cloth for cleaning. Never use solvents or alcohol for cleaning.

Optical lenses

Fan grids

Cleaning

36

LED Profile 150W 3200K
LED spotlight

12 Protecting the environment

For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling.

Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that

they are collected for recycling. Please follow the notes and markings on the packaging.

This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE). Do not dispose with your normal household waste.

Dispose of this device through an approved waste disposal firm or through your local waste
facility. When discarding the device, comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.

Disposal of the packaging mate­rial

Disposal of your old device

Protecting the environment

LED Profile 150W 3200K

37

LED spotlight

Notes

38

LED Profile 150W 3200K
LED spotlight

Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de