thomann SP- User Manual

User’s Manual

SP-5100

2

Using the Instruction Manual

Precautions

Please read the following carefully before use:

Do not expose the piano to high temperature, direct sunlight and excessive dusty places.

Do not place the piano too close to other electrical appliances such as television and radio. It may cause interference.

Do not place the piano to excessive humid area. Avoid putting container with liquid on top of the piano in order to
prevent damage of the internal parts of the piano by flowing liquid.

Always unplug AC cord by gripping the plug firmly, but not pulling on the cable.

Do not apply excessive force to the switches and buttons.

When the piano is not in use or in the time of thunderstorm, please disconnect the power supply.

Avoid adjusting the volume level to the maximum or to the levels that you feel uncomfortable, we recommend you to
limit the volume level to two-thirds of the max for preventing the damage of audiory sense.

Unplug the power cable before cleaning the piano. Do not connect or disconnect the power cable with a wet hand.

Check and clean the power plug periodically.

Clean the piano and remove the dust with a dry soft cloth or a slightly damp cloth.

Never use cleaners such as thinner or alcohol. To prevent any damage on the surface of the LED display, please
use lens cleaning tissue to clean the display.

If the piano cable is damaged, please do not use the piano. Otherwise it may cause fire or electrical hazard.

In case of malfunction due to improper handling the piano, please switch off and on again after 30 seconds.

Do not attempt to disassemble or repair the piano. If the piano does not work properly, please contact the
approved repairer.

The piano should not be exposed to dripping or splashing.

Congratulations on your purchase of this stage piano!
The piano is an user friendly piano with fabulous sound quality and advance feature such as scale practise and MIDI
controller. No matter you are adult or children, you will enjoy playing the piano as it provides amazing styles for
accompaniment, expressive tones, and real time record. Other features such as lesson function, variety of songs will
help you better master the playing skil.
This piano also provide with SD card function, you can choose your favorate MIDI song to play;You can also backup
your recording setting to SD card.

You are recommended to study this manual carefully before using the unit.

To avoid d amages, tur n off the power switches before you disconnect the related devices fr om the piano.

3

Main Feature

General Guide

Control Panel

The Connectors

- Power Jack

- Headphones Jack

- AUX OUTJack

- Sustain/Soft Jack

- MIDI IN/OUT Jack

Operation

- Power on & Master Volume

- Song

- Voices and Effects

- Metronome

- Style Control

- Record

- Lesson

- SD Function

MIDI

- MIDI Controler

- Command

- Channel

- Value

- MIDI OUT

- What is MIDI

Specifications

Voice List

Style List

Song List

MIDI Implementation Chart

4

5

6

7-8

7
7

7
8

8

9-19

9
9

10

15
15-16
17-18

18
18-19

20-24

20

21

22

23

23

24

25

26

26

27

28-29

Conent

4

Main Feature

Note:

1. Pressing "+" and "-" together when turning on the piano
will put all volume back to default setting.

2. " * ": There is a standard SD external Interface which supports the cards
of 16M ¨ 2G capacity. It is compatible with the file system format of the FAT 16 / 32 only

Top View

Rear View

CONTROL PANEL
MUSIC STAND

AUX OUT L / MONO

HEADPHONES JACKS
PIANO KEYBOARD
POWER JACK

1

2

3

4

5

6

SOFT PEDAL JACK

AUX OUT R
AUX IN
SUSTAIN PEDAL JACK

MIDI IN/OUT JACKS
USB JACK

7

8

9

10

L/MONO

R

SOFTSUSTAIN

USBAUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

L/MONO

R

SOFTSUSTAIN

USBAUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

3

4

5

6 8 9 10

5

General Guide

7

11

11

12

12

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

POWER SWITCH

START/STOP

FILL A/FILL B

BRILLANCE
MASTER VOLUME

ACC.VOL

RECORD
PLAY/STOP
TRACK 1/SONG MELODY OFF
TRACK 2
TRANSPOSE +/­TEMPO +/­MIDI CONTROL

- MIDI OUT

- COMMAND

- VALUE

- CHANNEL

16

STYLE
VOICE

SONG

REVERB/CHORUS

SD SLOT

+ & ­VOICE DIRECT SELECT BUTTONS
LED DISPLAY( VOICE, STYLE, SONG)

SCALE
DUAL
SPLIT

TOUCH
METRONOME
SD CONTROL

- PLAY

- STORE

17

18

19

20

21

22

23

24

25

26

27

Control Panel

3

4

5

6

20

17

18

19

21

1

7

8

2

24

25 26

27

9

10

11 12

13

14

15 16

22

23

-

6

When an optional set of stereo headphones is
connected with the headphones jack 2, the sound from
speakers will switch off automatically resulting in only
the sound from headphone to be heard.

When jack 1 is connected with the stereo headphones,
the sound can be heard from both headphones and
speakers of the piano.

Headp hon es
Jack 1

Headp hon es
Jack 2

1¡

2¡

Headphones Jack

Never use the headphone with high volume, as it may hurt your sense of hearing.

To prevent the damage of the speakers, ensure that the volume is set to the minimum
level before connecting the power and other devices.

AUX OUT Jack

7

Power Jack

This piano can be powered from a standard household
wall outlet by using the specified AC adaptor.
The power jack is located on the rear panel of the piano
body.
Make sure that only the AC adaptor specified for this
piano is used.
The adaptor shall be 12V DC output, and center positive
type.Make sure to turn off the piano before you connect
the adaptor into the AC wall outlet and the cord into the
unit.

The piano is supplied with a music rest that can be
attached to the instrument by inserting it into slot at the
rear of the control panel.
Please set up the music rest as shown.

Cautions£

Use of another type of adaptor creates a danger of fire
and electrical shock.For safety sake, make sure to unplug

the AC adaptor from the wall outlet whenever leaving the

piano unattended for a long time or during a thunderstorm.

Setting Music Rest

To avoid damaging the speakers, please ensure that
volume has set to the minimum level before connecting
the power and other devices.

When you want to listen to the voice with an amplifier,
connect amplifiers to the AUX OUT L/MONO and R jacks
on the rear panel. The volume is adjusted with the
VOLUME button. (For monaural playback, use the L/
MONO jack. For stereo playback, connect both L/
MONO and R jacks.)

L/MONO

R

SOFTSUSTAIN

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

L/MONO

R

SOFTSUSTAIN

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

L/MONO

R

SOFTSUSTAIN

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

8

L/MONO

R

SOFTSUSTAIN

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

An optional footswitch can be plugged into the SUSTAIN
jack for sustain control. The footswitch function is like
the sustain pedal on a piano.

MIDI stand for Musical Instrument Digital Interface.

MIDI is a world wide standard that makes it possible for
various electronic musical instruments and other devices.

MIDI IN:

MIDI OUT:

Data transmitted from other MIDI instrument via MIDI is
received by this terminal.

Data produced by the Digital Piano is to
other MIDI instruments via MIDI from this terminal.

transmitted

The audio output from a CD player/iPod connected to
the AUX IN jack on the rear panel can be mixed with
the sound of the piano brain. This function is convenient
when you want to play along with a favourite song.
The volume of the external signal is adjusted with
the VOLUME button.

An optional footswitch can be plugged into the SOFT
jack for soft control. Step on the soft pedal , all notes

played on the keyboard have a soft effect.

AUX IN Jack

Sustain Jack

Soft Jack

MIDI IN/OUT Jack

USB Jack

L/MONO

R

SOFTSUSTAIN

Step t he sustain pe dal on to open th e SUSTAIN
func tion , it will ap ply SUSTAIN effect to th e piano,
then r elease the su stain pedal to turn off the effect.

Connect PC or other USB host devices that support
USB Audio.

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

L/MONO

R

SOFTSUSTAIN

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT

12V

USB

You can simply co nnect the PC an d the piano wit h

a USB ca ble. For PC tha t has install ed Windows XP,
the US B driver for th e piano would b e automatically

inst alled as a USB Aud io Device. Aft er the PC
info rmed you that t he driver for t he piano has be en
prop erly instal led, you can ch oose the USB Audio

Devi ce in the audio d evice menu of the control panel

or the M IDI softwar e you are using t o ransfer MID I
data t o the piano.

Note: U SB connecti on can only be de tected with

Wind ows XP and Vista¡

Press the [POWER] switch. The LED display

lightens

Slide the [VOLUME] bar rightwards, the whole volume
increase, slide it leftwards, the whole volume
decreases.

Press the [+] and the [-] button synchronously, and then
power on the piano. it can reset all the setting to the
default value and erase the record data.

Power on & Master Volume

Song

Press the power switch on

Press the power switch on

Press first to stop playing the song,
press again to play current song repeatedly.

The level decreases The level increases

NOTE:

If the LED display has not lightened up after you power on the piano, please check the power supply.

If the piano is silent, the volume may be adjusted to its minimum level.

Although Mains switch is in OFF position, the piano is not disconnected from the power supply completely!

VOI CE

VOI CE

STY LE

STY LE

SON G

SON G

+

Press together

1¡

1¡

2¡

3¡

There are 60 songs in total. (See Appendix 3 ).

PLAY a song:

Press the [SONG] button to enter the song mode, the
SONG flag on LED is lightened. It will play all songs

repeatedly in a cycle.

Press the [START/STOP] button to stop playing the
song, but it will not quit the song mode. The 2nd time
you start playing the song by pressing the [START
/STOP] button, it will play current song repeatedly.

STYLESTYLE

SONGSONG

VOICEVOICE

Enter the song mode
and play all songs circlely.

Song flag
is lightened

9

VOLUME

MAX MIN

up.

SELECT a song:

Use the [+] or [-] button to select the song you want.
If you select the new song, LED will display it's
number at first and then display introductory beat and
the measure count.

INTRODUCTORY BEAT:
After pressing [START/STOP] , the measure count
begins from negative value to 1, and then begins to
play the song.

Press the [TRACK1] button to enter self-learning mode,
and turn on/off the main melody of the song.

While the song stop playing, you can press the [VOICE]
and the [STYLE] button to exit.

VOICE

VOI CE

STYLE

STY LE

SONG

SON G

Select a song

Display the measure count

The beat LED indicators
are lightened in turn.

The LED indicator is lightened.

STYLESTYLE

STYLESTYLE

SONGSONG

SONGSONG

VOICEVOICE

VOICEVOICE

Exit the song mode

2¡

2¡

3¡

3¡

4¡

4¡

5¡

Voices and Effects

There are 20 voices in total (See Appendix 1).

Voice Select

When power is on, LED lightens the VOICE flag and
displays the 001 voice number.

Press the [VOICE] button to enter the voice mode,
LED displays the VOICE R1 number.

Press the [DUAL] button to enter the dual voice mode,
LED displays the VOICE R2 number.

you can select other voice by pressing the [+] and the

[-] or voice Direct Select buttons.

VOI CE

VOI CE

STY LE

STY LE

SON G

SON G

Display VOICE R1

Display VOICE R2

Select a voice

Press the first time to select GRD.PIANO

Press the second time to select BRT.PIANO

Use Direct Select buttons to select

There are 10 voices Direct Select buttons to select 20
voices. Each Direct Select button can be used to choose
2 different voices.

Press the first time to select upper layer voice , press the
second time to select the lower layer voice.

When you select the upper layer voice, the upper layer
indicator turns on.

When you select the lower layer voice, the lower layer
indicator turns on and the upper layer indicator turns off.

1¡

10

Turn on the DUAL voice

The indicator goes off.

2¡

3¡

4¡

1¡

Press the [DUAL] button to turn on the DUAL mode,
the VOICE flag on the LED and the indicator are both
lightened. The dual voice number is also displayed on
the LED.

Then, you can get two different sounds at the same
time when you press one key on the keyboard.

Use the [+] / [-] button and voice Direct Select buttons
to select your desired voice. The default voice number
is 007.

Press the [DUAL] button again to turn off the DUAL
mode, the indicator goes off.

Select a dual voice

VOI CE

STY LE

SON G

Voice flag is lightened

Two voices will sound
at the same time.

Eg. Piano

STR. TRIO

Dual

The piano has dual voice. You can create the new sound through this function for richer and punchier
sounds. you can get two different sounds at the same time when pressing one key in the right area in the
keyboard.

11

While the key board is in split mo de, only the right
hand area can r espond the dual voice, the left
hand not belo w split point would respond.

NOTE:

VOI CE

STY LE

SON G

2¡

3¡

1¡

VOI CE

STY LE

SON G

Display split parameter

Change split point

The indicator is flashing.

VOI CE

STY LE

SON G

Melody
area

Chord
area

Default split
point F#3

You can split the piano to melody and chord
area by this function.

Press the [SPLIT] button, LED displays the current
split parameter XXX .

Use the [+] / [-] button or Keyboard to change it, after
exit the setting mode the new value becomes to the
new split point, the split default value is 34.

The new split point belongs to the left area of the
keyboard.

Split Point

VOI CE

STY LE

SON G

Display touch value

Select touch response type

2¡

3¡

1¡

This function allows you to turn on the dynamic
level when playing the keyboard.

When power is on , the TOUCH indicator lightened.
Press the [TOUCH] button continuously to select the
touch response type, the TOUCH indicator flashes and
displays touch response type 00X temporarily on LED.

There are 4 touch response types. Press [TOUCH]
button repeatedly to select, the default is 002.

If the type is set as OFF, it means no touch response
to keyboard, the TOUCH indicator goes off.

NOTE:

If you don't press anybutton for 2 seconds in touch
response type select mode,it will quit this mode
automatically.

The indicator flashes

VOI CE

VOI CE

STY LE

STY LE

SON G

SON G

12

Touch

You can change the pitch of the entire keyboard by
semitone steps with TRANSPOSE function.

Press the [TRANSPOSE +] or [TRANSPOSE -] button
for the first time, LED displays current transpose value
temporarily.

Press [TRANSPOSE +] to increase the value and Press
[TRANSPOSE -] to decrease the value, the maximal
range to be adjusted is from -12 to +12 semitones, the
default value is 000.

In TRANSPOSE setting , press the [TRANSPOSE +]
and [TRANSPOSE -] button simultaneously to set the
value to default.

NOTE:

If you don't press any button for 2 seconds in transpose
setting mode, it will quit this mode automatically.

- TRANSPOSE +

- TRANSPOSE +

- TRANSPOSE +

- TEMPO +

- TEMPO +

- TEMPO +

VOI CE

VOI CE

STY LE

STY LE

SON G

SON G

Display current transpose value

Display default transpose value

increase the value

Decrease the value

- TRANSPOSE +

2¡

3¡

4¡

1¡

Transpose

For a mellower sound For a brighter sound

13

Brilliance

When the pian o is power on:

Push [BRILL ANCE] splider ba r to right, it sound s
brighter ;
Push [BRILL ANCE] splider ba r to left, it sounds
more gloomy ;
You can change the piano brilliance as your wish.

Reverb/chorus effect will enhances the piano with
fuller and expressive sound.

When power is on , the Reverb/chorus indicator is on.

Press the [REVERB/CHORUS] button to switch the
DSP response setting.

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

Display touch
value on the LED

2¡

1¡

Reverb/Chorus

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

Pres s [REVERB/C HORUS] repe atedly to swi tch
to rev erb or chorus s etting mode .

Ther e are 32 level to b e selected by p ressing [+]
and [- ] button. The default chorus level is 00, the
defa ult reverb le vel is 08.

3¡

4¡

This function allows you to experience different scales
when you play certain genres of music that is not comp­osed based on twelve equal interval.

Press [SCALE] button to enter into scale mode and the
button indicator lights up; The default scale is 001
Pythagor.

There are 6 types of scale to select:
Pythagor, Major, Minor, Meantone, Werckmei, kirnberg.

Press [SCALE] button again to exit scale mode and the
button indicator goes off.

Hold and press [SCALE] for 2 seconds to enter into
SCALE select status. The scale now flashes and the scale
number displayed on LED.

Use [+] or [-] to select the scale type, play the key from
C7~B7 to select scale root.

VOI CE

VOI CE

STY LE

STY LE

SON G

SON G

Enter scale mode and
the indicator lights up.

Press and hold the button for
2 seconds to enter scale select
status. The indicator is flashing.

Display scale type.

Display scale root.Press the G7 key

C7

B7

Press the button again to exit scale
mode. The indicator goes off.

Number Name Number Name
1 Pythagor
2 Major
3 Minor

4 MeanTone
5 Werc kmei
6 Kirn berg

Types of scale :

Select the scale type

VOI CE

STY LE

SON G

2¡

3¡

4¡

5¡

1¡

14

Scale

For Ex ample, to sel ect the scale n amed "Minor "
and se t the root key to " G", Press "+" t ill "003" is
disp layed on the LE D, then press t he G7 key for 3
seco nds to set the ro ot, LED displ ays "G", "G"
stan ds for "Scale R oot".

ACC
VOL

START

/STOP

Metronome

Style Control

Press the [METRO] button to turn on the metronome
and the metronome sound will be played.

Press the button again to turn off the metronome.

When the style stops to play, the beat type follows 4/4
after turning on the metronome.
When the style begins to play, the beat type follows the
current style.

Metronome can be turned on together with the style.
If the style plays at first, then to turn on the metronome,
the metronome will respond next measure.
If the metronome plays at first, then to start to play the
style, the metronome responds at once to the first beat
of the style.

The LED indicator is lightened.

Metronome can be turned on
together with the style.

The beat LED indicators
are lightened in turn.

The beat LED indicators are flashing at the same time.

2¡

2¡

2¡

3¡

4¡

1¡

1¡

1¡

STYLE SELECT

Press the [STYLE] button to enter style mode, the style
number and style flag on the LED are both lightened.

You can use the [+] / [-] button to select the style you
want.

When the style is not playing, you can press the
[START/STOP] button to enter SYNC START
mode, the beat point are flashing at the same time,
now the style will be start with A.B.C. on if you press
the key in the chord area on Piano.

Press the [START/STOP] button again to stop style
play and turn off the A.B.C. function at the same time.

" "

There are 20 styles in total. (See APPENDIX 2).

STYLESTYLE

SONGSONG

VOICEVOICE

VOI CE

STY LE

SON G

Style flag

Style number

Select the style

VOI CE

STY LE

SON G

Enter " SYNC START " mode

Chord area

15

Start/Stop The Style

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

ACC
VOL

START

/STOP

ACC
VOL

START
/STOP

ACC
VOL

START
/STOP

ACC
VOL

START

/STOP

When power is on, the preset style mode is NORMAL
mode.

Press the [ACC VOL] button, LED displays the current
volume temporarily.

You can use the [+] / [-] button to adjust the volume
from 0 ~ 31. (Default Accomp Value is 24) The ACC
VOL indicator is flashing at the same time.

When power is on, the ACC VOL indicator is on.

In ACC VOL mode, press the [+] and [-] buttons
synchronously can mute the accompaniment, the ACC
VOL indicator goes off at the same time; If you press
the [+] and [-] buttons again synchronously can open
the accompaniment, the ACC VOL indicator is lightened
at the same time.

Preset style mode is NORMAL
mode, the indicator is off.

Style is not playing:

Style is playing:

The indicator is flashing, after a
measure is over, the indicator is
on, enter VARIATION mode.

The indicator is flashing, after a
measure is over, the indicator is
off, enter NORMAL mode.

Press and enter VARIATION
mode, the indicator is on.

VOI CE

STY LE SON G

The indicator is on.

The indicator
is flashing.

The indicator
goes off.

Display current volume.

Adjust the
volume

Press them
together.

Press them
together.

VOI CE

VOI CE

STY LE

STY LE

SON G

SON G

VOI CE

STY LE

SON G

Display default tempo.

- TRANSPOSE +

- TEMPO +

VOI CE

STY LE

SON G

Display current tempo

Adjust the tempo from 30~280.

Use the [TEMPO+] or [TEMPO-] button to adjust the
tempo from 30 to 280.

Press the [TEMPO+] and [TEMPO-] synchronously to
set to the default tempo.

When the style is not playing, it will take out the default
tempo of the style if you select the style.
When the style is playing, it will keep the current tempo
once you change the style.

2¡

2¡

2¡

3¡

3¡

3¡

4¡

1¡

1¡

1¡

16

Tempo

FILL IN A/B

Accomp Volume

- TRANSPOSE +

- TEMPO +

ACC
VOL

START

/STOP

ACC
VOL

START

/STOP

ACC
VOL

START
/STOP

ACC
VOL

START
/STOP

ACC
VOL

START
/STOP

In NOR MAL mode, pre ss the [Fill A / Fill B] button

to ins ert 1 measure f ill and the Fill A / Fill B indicator

is fla shing, afte r one measure i s over, VARIATION
Styl e will be retur ned.

In Variation mode, press the [Fill A / Fill B ] button
to ins ert 1 measure f ill and the Fil l A / Fill B
indi cator is flas hing, after o nemeasure i s over,
NORM AL style will b e returned.

ACC
VOL

START
/STOP

Record

There is

one user song can be recorded, include

2 Melody Tracks.

Waiting for recording:

Press the [RECORD] button for the first time to enter
the record mode.

The RECORD indicator flashes, four beats flashes
synchronously to indicate waiting for recording.

At the same time an empty track will be selected to be

recorded automatically and relative track flag flashes
(the selection order is Track 1, Track 2, the Track 1 will
be selected while neither the tracks is empty )

You also can press the [TRACK 1] or [TRACK 2]
button to select the track you want to record.

Start recording:

When 4 beats flashes on LED, you can play the
keyboard directly to start recording, the RECORD
indicator and track flag that you select both flashes.

When 4 beats flashes , you can also press the
[START/STOP] button, open the A.B.C. and start record.

Press the key in the left area and sync start style, then

style data are recorded to the correspond track.

If the two tracks all have style data, it will be overwrited
by the new data.

Stop recording:

Press the [RECORD] button for the second time to
stop recording. LED display and indicator get back

to the previous mode.

If the capacity is full while recording, the recording will
be stopped automatically with the FUL display on LED.

Enter the record mode,
the indicator is flashing.

The indicator turns on.

The indicator is off.

Play the keyboard to start recording.

Select the record track,
the indicator will flash.

The indicator will still flash.

The indicator turns on.

Four beats flashes synchronously
to indicate waiting for recording.

NOTE:

The recorded data will not be lost when you turn off the
power.

Hold on the [+] and [-] button together and power on
the piano, it will erase all the recorded data.

Open A.B.C. and start record

Chord area

NOTE:

when entering record mode, the old data of the selected
track will lost.

VOI CE

STY LE

SON G

2¡

3¡

1¡

17

VOI CE

STY LE

SON G

Record Song

Get back to previous mode.

VOI CE

STY LE

SON G

ACC
VOL

START
/STOP

Pres s the [PLAY/STO P] button for t he first time
to pla yback the rec ord data, you c an choose any
one tr ack or all two tr acks to play, the indicator is on.

Press it for the second time or press the [START/STOP]
to sto p playback.

You can press the [TRACK 1] and [TRACK 2] button to
turn on or off the relative track in process of playback.

Enter the lesson mode,
the indicator turns on.

Exit the lesson mode,
the indicator turns off.

SD SLOT

Stop playback record.

VOI CE

STY LE

SON G

2¡

2¡

3¡

3¡

1¡

1¡

Lesson

SD Function

In song mode, press the [TRACK1] button to enter the
lesson mode.

When you press the [TRACK1] button, the [TRACK1]
indicator turns on, it will mute the melody of the song,
then you can play the Piano to practise the song you
want.

Press [TRACK1] again and melody will save, the
[TRACK1] indicator again goes off.

STYLESTYLE

SONGSONG

VOICEVOICE

Enter the song mode.

Play the keyboard to practise the song,
and the melody of the song will be muted.

There is a standard SD external interface which supports
the cards of 16M ~ 2G capacity. It is compatible with
the file system format of the FAT 16/32.

Press one of the 2 SD buttons [PLAY], [STORE] to
enter the relative function mode.

If there is no card, "ERR" will display 2 seconds.

VOI CE

STY LE

SON G

18

Playback Song

Then, select the track,
the indicator is on.

Enter the record playback
mode, the indicator is on.

Stop playback record.

Turn on or off the track.

If there is no record data when you press [PLAY/STOP]
LCD will display "NUL" temporarily.
Press "+" and "-" together when power is on and the
song data will be cleared.

NOTE:

START

/STOP

ACC

VOL

SD card function

PLAY can play midi file at the root directory in SD,
support format 0 and format 1.

STORE can save the recorded data to SD root directory
as midi file which can be played on MIDI player.

SD button

In the SD mode, it won't respond to the other button
except [VOICE], [STYLE], [SONG].

It can play MIDI file and save recorded data at the root
directory.

Play

When power is on, press the [PLAY] button to play all
files at the root directory in SD card and the PLAY
indicator is on.

In the SD mode, you can select the midi file with [+]
or [-] button. The default file number is 001.

When playing the midi file, you can press the [PLAY] or
the [START/STOP] button to stop playing.

Press the [START/STOP] button again to start to play it
repeatedly.

Press the [PLAY] button when there is no midi file in the
SD card, LED display "noF", then the display will get back
to previous mode in 2 seconds.

Store

VOI CE

STY LE

SON G

Play midi file at the root directory in SD.

Play all files and indicator is on.

Enter store mode and indicator is on.

After saving, indicator goes off.

The midi file name is generated
by system automatically.

Stop playing.

No midi file in the SD

Select the midi file to play.

Start or stop playing the midi file.

Save the recorded data to SD root
directory as midi file.

VOI CE

VOI CE

VOI CE

VOI CE

STY LE

STY LE

STY LE

STY LE

SON G

2¡

1¡

19

SON G

SON G

SON G

Plea se add the foll owing in the "S tore" Secti on,
afte r "If the SD card c apacity is fu ll, it will sto p
savi ng auto matic ally and display "Ful".Then exit
the st ore mode and re turn to the pre vious mode."

If the re's no MIDI fi les in the root d irectory of t he
card , "NoF" will di splay on the LE D, meaning
ther e's no record ed user song to b e saved to the
card .

If the c ard is write- protected , "Loc" will di splay
on the L ED.

20

Pres s this button , the channel i ndicator is o n,
you ca n select any ch annel that yo u want from
1-16 b y pressing th e [+], [-] or num eric button .

Midi Controler

Under MIDI controller mode, other buttons all
have no effect except four MIDI controller, [+]/[-]
numeric button, the VOICE/STYLE/SONG button.

When p ower on the pia no, press one o f the
[COM MAND], [VALUE], [CHANNEL] and
[MID IOUT] MIDI co ntroller to e nter into MID I

cont roller mode . When in other m ode, press th e
[MID IOUT] butto n to send out a set o f default mid i
cont rol command .
Pres s the [VOICE ] / [S TYLE ] / [SONG] b utton,
can ex it the MIDI con troller mod e, return to vo ice,
styl e or song mode.

Pres s this button , the command i ndicator is o n,
you ca n choose the re lated comma nd by pressing
the [+ ] / [-] or numeri c button.

Pres s this button , the MIDIOUT indicator turns on
and it s end out a set of mi di control co mmand, the
indi cator flash es in the proce ss of sending o ut,
when i t finish sen di ng out, the ind icator go off.

Pres s this button , the value ind icator is on, y ou

can se t the value by pr essing the [+], [-] or numeric

butt on.

+

Exit the MI DI
control le r mode

into midi c on troller m od e

fini sh sending ou t

Summarize

Command

MIDI OUT

Value

Channel

When the button is pressed, the indicator of
the button lighter.
The LED display 001 (default command), you
can select MIDI CTRL information by the numeric
button , the [ + ] button or the [ - ] button and
¡XXX,¡ will displayed on LED. You can set 131
MIDI command (0 £130), the default number is 1.

21

Command

VOI CE

STY LE

SON G

The command you select is shown on the LED .

(Once you set 1 28,”Cn”will be d isplayed, you
set 129, “Dn” w ill be displayed , you set 130,
“En” be displ ayed), you can sel ect number
allowed cir clularly by pressing the [ + ] button
or the [ - ] button ;While setting n umber with the
numeric but ton,after you pr ess the first numb er,
the command i ndicator flash es and wait for press
the second nu mber, finish pressing the second,

if still allo w press the third nu mber, the indicator
continues t o flash, waiting f or press the third
number, when y ou finish pressi ng the third

number, it wil l stop flash. If you d oes not press
any button in 2 s econds , it will exi t the number

setting sta tus automatica lly.

number

standard MI DI control(BN)

0｣127

program cha nge(CN)

128

129

130

command

channel pre ssure(DN)

pitch bend( EN)

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

127

128

129

VOI CE

STY LE

SON G

130

If the number y ou set is from 0 ｣127 , tha t represent as the D ATA1 of Bn order, and th e value of
DATA2 can be set by pressing [VALUE] bu tton.

If the number y ou set is 128,that m eans Cn command be s elected, the val ue of DATA can be set by
pressing th e [VALUE] button .
If the number y ou set is 129, that me ans Dn command be se lected,the val ue of DATA can be set by
pressing th e [VALUE] button .
If the number y ou set is 130, that me ans En command be se lected, the valu e of DATA can be set by
pressing th e [VALUE] button .
When the valu e you set is 0H, that me ans to bend the note d own to the lowest,

When the valu e you set is 40H, that m eans to bend the not e to the normal valu e;

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

3.

1.

2.

The button is u sed to choose the MI DI CTRL
channel, fr om:1~16.

Pressing th is button to get int o CHANNEL

setting mod e, the LED display t he current defau lt
channel val ue XX, the CHANNEL button indicator

light up.

Use the [ + ] butto n, the [ - ] button or numeric

button to cho ose CHANNEL.
You can choose channel allowed circlularly by
pressing th e [ + ] or the [ - ] button .

You can also set channel with the numeric button,
after press t he first number, ch annel indicato r

flashes and w ait for press the se cond number,
when you fini sh pressing the se cond number, it
will stop fla sh. If you does not pr ess any button
in 2 seconds , it w ill exit the numbe r setting
status auto matically.

If you press th e [COMMAND] butt on or [VALUE]

button, it wi ll get into corres pond mode, and the
indicator o f the correspond ing button indicator

turn on, the CH ANNEL indicator go off.

If you press th e [MIDIOUT] butt on, it will get
into midiou t mode.

In COMMAND mo de, press the [VALUE]/
[CHANNEL] b utton to enter int o VALUE and
CHANNEL setting mode, corresponding button
indicator t urn on, the COMMAN D indicator go off.
If you press th e [MIDIOUT] butt on, it will enter
into midiou t mode and send out mi di control
message.
Press the [CO MMAND] button co ntinuously to
select the ne xt command type (a s fol lo ws).

Press t he ｡C OMMAN D｡
butto n co ntinu ously

NO.

Adj ust digi t val ue

Display (def aul t)

Command typ e name
1
2

3
4

0-127

128
129

130

001

Cn
Dn
En

Cn
Dn
En

Bn

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

once

VOI CE

STY LE

SON G

twice

thrice

quartic

22

Channel

4.

5.

6.

1.

2.

3.

4.

5.

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

Press this bu tton to enter into VALUE setting
mode, the ind icator is on, the LE D will show the
default VALUE as 064.

Use the [ + ] butto n, the [ - ] button or numeric
button to set VALUE value from 0 Ł127.
you can set val ue allowed circlularly by pressing
the [ + ] button or t he [ - ] button .
you can also se t value with the num eric button,
after you pre ss the first numbe r, the value
indicator f lashes and wait fo r press the second
number, fini sh pressing the second, if still allow
press the thi rd number, the indi cator continues
to flash, wai ting for press the t hird number,
when you fini sh pressing the th ird number, it will
stop flash. If you does not pres s any button in 2
seconds , it wi ll exit the number s etting status
automatic ally.

If you press th e [COMMAND] butt on or the
[CHANNEL] b utton , it will get in to correspond
mode and its bu tton indicator t urn on, the VALUE
indicator g o off.

If you press th e [MIDIOUT] button, it will get

into MIDIOU T mode.

23

Value

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

VOI CE

STY LE

SON G

Press [MIDI OUT] button to sen t out a set of
MIDI contro l message.
Press this bu tton, the indica tor of that button
flash withi n 2 seconds, when fi nish sending out
MIDI CONTRO L message, the indicator go off.
Press this bu tton doesn't cha nge current mode
after sendi ng out MIDI CONTRO L essage.
Continuou s pressing the [MIDIOUT] button, i t
will send out s ame MIDI CONTROL message.

MIDI OUT

1.

2.

1.

2.

3.

4.

What is MIDI

MIDI IN/OUT

Terminals

MIDI Connection

Connection rule

In midi connection, the equipment which controls another equipment is called Host Equipment.
Another equipment is called Affiliated Equipment.
The host equipment's MIDI OUT connect with affiliated equipment's MIDI IN.
Do not connect MIDI OUT with MIDI IN on the same equipment.

Sample Connection Method

Connect the MIDI interface with your PC.

The piano can control other equipments or electronic instruments.

Some equipments can be used to control the piano.

PC recorded data (MIDI) can be played on the piano.

Connect the MIDI interface with other digital music instruments.

Major Application

Musical Instrument Digital Interface. The standard
interface between PC and Electronic instrument.

It is equipped with standard MIDI interface, including 1
MIDI IN and 1 MIDI OUT.

Connection
It can connect with PC or other MIDI equipment.

MIDI IN

You can use a MIDI cable to connect the MIDI IN terminal of system to another MIDI OUT terminal of compatible MIDI
electronic instrument. Use MIDI IN, system can receive midi data such as note, program and touch etc. in order to be
handled by another MIDI instrument.

MIDI OUT

You can use a MIDI cable to connect the MIDI OUT terminal of system to another MIDI IN terminal of compatible MIDI
electronic instrument. Midi data of system can be sent by MIDI OUT, when a note is generated, the relative message will
be transmitted. System can control other midi instrument by sending program change messages

1¡

1¡

1¡

3¡

3¡

3¡

¡

2¡

2¡

2¡

¡

24

L/MONO

R

SOFTSUSTAIN

12V

AUX OUT

AUX IN PEDAL MIDI IN

MIDI OUT USB

Specifications

Keyboard
Voice
Style
Song
Display
Switch and Buttons

Transpose
Pedals
Connectors

+

25

POWER SWITCH, VOLUME SWITCH, DUAL, REVERB/CHORUS,
TOUCH, RECORD, TRACK 1, TRACK 2, PLAY/STOP, SPLIT, METRO,
TRANSPOSE +/-, TEMPO +/-, SD CONTROL, SONG, VOICE, STYLE,
BRILLIANCE,MIDIOUT,COMMAND,VALUE, CHANNEL,SCALE,
START/STOP, ACC VOL, FILL A/FILL B

88 keys, 3 kinds of touch level.
20 voices.
20 piano styles.

60 songs.

LED display.

12 semi tones
Soft, Sustain
AC POWER, HEADPHONES, AUX IN/OUT, MIDI IN/OUT, PEDALS,USB

Dimension

Weight

1360(L)x370(W)x143(H)mm

19.5kg

No

No

Name of Voice

Name of Style

Name of Voice on Panel

Appendix 1 - Voice List

Appendix 2 - Style List

Acoustic Grand Piano
Epiano1
Harpsichord
Hammond Organ
Accordion
Steel Guitar
String
Trumpet
Folk Sax
Jazz Flute
Bright Acoustic Piano
Epiano2
Vibes
Church Organ
Harmonica
STRTRIO
Slow String
Brass Section
Oboe
Pan Flute

Pianist
8 Beat
16 Beat
Ballad
Pop Piano
Boogie
Slow Rock
Swing
Jazz
Jazz Waltz
Swing Fox
Shuffle
Twist
Country Ballad
Bossa Nova
Latin
March
6/8 March
Waltz
Slow Waltz

001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020

001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020

GRDPIANO
EPIANO1
HARPSICD
DRAWBAR
ACORDION
STGUITAR
STRING
TRUMPET
FOLK SAX
JZ.FLUTE
BRTPIANO
EPIANO2
VIBES
CHRORGAN
HAMONICA
STRTRIO
SLOWSTR
BRASS
OBOE
PANFLUTE

PRG

BANK

0
4

6
16
21
25
48
56
66
73

1

5
11
19
22
40
49
61
68
75

0
8
0
0
0
8
8
8
8
0
0
8
8
0
0
8
0
0
0
0

26

Appendix 3 - Song List

For Alice
Habanera
Four Little Swans
Moseta Dance
Germanic Dance
Turkish March
March
Away In A Manger
Chopsticks
2-Part Invention #13 In A Minor.B.W. Iii

Name of Song
Piano

Folk & Country

Golden & Pop

No

001
002
003
004
005
006
007
008
009
010

011
012
013
014
015
016
017
018
019
020

021
022
023
024
025
026
027
028
029
030

Country
Jambalaya
Susanna
Bridge
Battle Hymne Of The Republic
The Old Gray Mare
American Patrol
In The Rain
Sippin`Cider Through A Straw
Are You Lonesome Tonight

Only You
End Of The World
House Of Rising Sun
The Blue-Bells Of Scotland
Over The Rainbow
Beautiful Dreamer
Edelweiss
O Sole Mio
Silent Night
Ave Maria

Name of Song

Chinese

No

South Mud Bay
Give You A Rose
Flowing Rill

Five Hundred Miles
Happy New Year

It`S Beginning To Look A Lot Like Christmas

Jeanie With The Light Brown Hair
My Bonnie
Song Of The Pearlfisher
The Stage Coach
Entertainer
Annie Laurie
Killing Me Softly With His Song
Last Rose Of Summer
The Old King Cole

Jazz & fusion

Maple Leaf Rag
June Samba
Funk

I Can......

Sea Shore
Guitar&Saxphone
The Hip Hop's Night
Blue Lunch
Cobweb
Wine
Jazz Old Man
Dark Eyes
Carlos
Sad
The Jazz

031
032
033
034
035
036
037
038
039
040
041
042

043
044
045
046
047
048
049
050
051
052
053
054
055
056
057

058
059
060

27

MIDI Implementation Chart

Function

Transmitted Recognized

Remarks

Basic Default

Channel Changed

1ch

1-16ch

1-16ch

1-16ch

Default

Mode Messages

Altered

¡

¡

***********

3

¡

¡

Note

Number :

True voice

09-120

***********

0-127

0-127

Velocity :

Note on

Note off

©

9nH,V=1-127

¡ £ 9nH,V=0£

© 9nH,V=1 -127

¡ (9nH,V=0;

8nH,V=0- 127)

After

key¡s

Touch

Ch¡s

¡

¡

¡

©

Pitch Bend

¡

©

Control

0

Change

1

5

6

7

10

11

64

65

66

67

80

81

91

93

120

121

123

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

¡

Bank Select

Modulation

Portamento Time

Data Entry

Volume

Pan

Expression

Sustain Pedal

Portamento on/off

Sostenuto Pedal

Soft Pedal

Reverb Program

Chorus Program

Reverb L evel

Chorus L evel

All Sound Off

Reset All

C

ontrollers

All Notes Off

Program

Change :

true #

¡

***********

¡

0-127

System Exclusive

¡

¡

System £Song Position

Common

£Song Select

: Tune

¡

¡

¡

¡

¡

¡

System : Clock

Real Time :Commands

¡

¡

*1

¡

¡

*1

Aux :LOCAL ON/OFF ¡ ¡

28

¡

¡

¡

¡

Aux

:LOCAL ON/OFF
:ALL NOTES OFF
:Active sense
:Reset

¡
¡

¡

¡
¡

¡

*1
When the accompaniment is started, an FAH message is
transmitted. When accompaniment is stoped, an FCH
message is transmitted. When an FAH message is
received, accompaniment is started. When an FCH
message is received, accompaniment is stoped.

Messages

Mode 1 : OMNI ON , POLY Mode 2 : OMNI ON , MONO ｩ : YES
Mode 3 : OMNI OFF , POLY Mode 4 : OMNI OFF , MONO ｡ : NO

29

MIDI Implementation Chart

Art:SP5 10 0
Version: G 04