Tenda N300 router wireless Fast Ethernet Banda singola (2.4 GHz) 4G Bianco User guide

English

I. Set up the router

1

PWR

ON/OFF

RST/WPS

WAN/LAN LAN TEL

4

2 3

1

① Attach the antennas to the router.

2

① Insert a SIM card into the slot on the bottom panel of the router.

12345A

6789

Mini SIM card Nano SIM card + adapterMicro SIM card + adapter

+

+

✓ ✓✓

Português (Brasil)

I. Configurar o roteador

Conecte as antenas ao roteador.

1

Insira um cartão SIM na abertura no painel inferior do roteador.

2

12345A

6789

Cartão Mini SIM Cartão Nano SIM + adaptadorCartão Micro SIM + adaptador

✓ ✓✓

Use o adaptador de alimentação incluído para ligar o PWR do roteador a uma

3

fonte de energia.

4

Pressione o botão ON/OFF (Ligar/Desligar) para ligar o roteador. O LED indicador

+

+

acende uma luz.

Aguarde alguns instantes. O roteador será conectado com êxito à Internet quando o
indicador LED acender.

Dicas:
Se o indicador não se acender, consulte a Q1 na FAQ para encontrar uma solução.

II. Acessar a internet

Conecte seu dispositivo com fio, como um computador, à porta WAN/LAN ou
LAN do roteador usando um cabo Ethernet.

Conecte seu dispositivo sem fio, como um smartphone à rede Wi-Fi do roteador
usando o Wi-Fi Name e a Wi-Fi Key localizados no painel inferior do roteador.

Para configurar melhor o roteador, como realizar a alteração do nome e da chave
WiFi, efetue o login na interface do usuário da web do roteador acessando
tendawifi.com por meio de um dispositivo conectado.

Dicas:
Se você não conseguir fazer login na interface do usuário pela web do roteador, consulte
Q3 em FAQ (perguntas mais frequentes).

3

③ Use the included power adapter to connect the PWR jack of the router to a power
source.

4

④ Press the ON/OFF button down to turn on the router. The LED indicator lights up.
Wait a few seconds. The router is connected to the internet when the LED indicator

lights up.

Tips:
If the LED indicator does not light up, refer to Q1 in FAQ.

II. Access the internet

Connect your wired device, such as a computer, to the WAN/LAN or LAN port of
the router using an Ethernet cable.

Connect your wireless device, such as a smart phone, to the Wi-Fi network of the
router using the Wi-Fi Name and Wi-Fi Key labeled on the bottom panel of the
router.

Wi-Fi Name: Tenda_xxxxxx
Wi-Fi Key: xxxxxxxx

PWR

ON/OFF

RST/WPS

WAN/LAN LAN TEL

（Optional）

To further configure the router, log in to the web UI of the router by visiting

tendawifi.com on a connected device.

Tips:
If you cannot log in to the web UI of the router, refer to Q3 in FAQ.

Italiano

I. Configurare il router

Collegare le antenne al router.

1

Inserire una scheda SIM nello slot sul pannello inferiore del router.

2

12345A

6789

Scheda Mini SIM Scheda Nano SIM + adattatoreScheda Micro SIM + adattatore

✓ ✓✓

Utilizzare l'alimentatore in dotazione per collegare il jack PWR del router a una

3

fonte di alimentazione.

4

Premere il tasto ON/OFF per accendere il router. La spia LED si accende.

+

+

Aspettare qualche secondo. Il router è collegato correttamente a Internet quando
l'indicatore LED si accende.

Suggerimenti :
Se l'indicatore non si illumina, fare riferimento a Q1 nelle FAQ per trovare una soluzione.

II. Accedere ad internet

Collegare il proprio dispositivo cablato, per esempio un computer, alla porta
WAN/LAN o LAN del router utilizzando un cavo Ethernet.

Collegare il proprio dispositivo wireless, per esempio uno smartphone, alla rete
Wi-Fi del router usando Wi-Fi Name e Wi-Fi Key riportati sull'etichetta sul
pannello inferiore del router.

Per configurare ulteriormente il router, ad esempio modificando il nome Wi-Fi e la
chiave Wi-Fi, accedere all'interfaccia utente Web del router visitando tendawifi.com
tramite un dispositivo collegato.

Suggerimenti:
Nel caso in cui non si riesca ad accedere all'interfaccia utente Web del router, fare
riferimento a Q3 nelle FAQ.

LED indicators Ports & Buttons

LED indicator Status Description

Power LED
indicator

Internet LED
indicator

Wi-Fi LED
indicator

LAN LED
indicator

Signal strength
LED indicator

Solid on

Off The router is powered off or not powered on properly.

Solid on

Off No internet access is available.

Solid on

Blinking

Off

Solid on

Off

3 bars Excellent signal.

2 bars Good signal.

1 bar

Off No signal.

The router is powered on properly.

The router is connected to the internet.

The Wi-Fi network is enabled.

The router is ready for WPS negotiation.

The Wi-Fi network is disabled.

At least one device is connected to a LAN port of
the router.

No device is connected to any LAN port of the router.

Fair signal.

Port/Button Description

ON/OFF

PWR

RST/WPS

WAN/LAN

LAN

TEL

Antenna socket

Power button.
Used to turn on or off the router.

Power jack.
Used to connect to a power source to supply power for the router.

Used to reset the router, or start WPS negotiation of the router.

Reset: Hold down the button for about 8 seconds, and release it when all
LED indicators light off and then light up. The router is reset.

WPS: Press the button, and the Wi-Fi LED indicator blinks. Configure
WPS-enabled wireless devices within 2 minutes to start WPS negotiation
with the router.

It can serve as a WAN port or a LAN port.
By default, the router is under 3G/4G router mode and it serves as a LAN port.
When the router is set to the wireless router mode, it serves as a WAN port.

It is a LAN port used to connect to wired devices, such as a computer.
When the IPTV function is enabled under the wireless router mode, it serves
as the IPTV port to connect to the set top box.

It is a telephone port, used to connect to a landline phone for voice service.

Used to connect external antennas, which enhance the signal strength.

Polski

I. Konfiguracja routera

Podłącz anteny do routera.

1

Włóż kartę SIM do gniazda na dolnym panelu routera.

2

12345A

6789

Karta mini-SIM Karta nano-SIM + zasilaczKarta micro-SIM + zasilacz

✓ ✓✓

Użyj dołączonego zasilacza, by podłączyć wtyczkę PWR routera do zasilania.

3
4

Naciśnij przycisk ON/OFF aby włączyć router. Włączy się kontrolka LED .

+

+

Poczekaj kilka sekund. Zapalenie się kontrolek LED oznacza, że router został
pomyślnie podłączony do Internetu.

Wskazówki:
Jeśli kontrolka nie zapali się, należy zapoznać się z Q1 w FAQ, by znaleźć
rozwiązanie.

II. Połącz się z Internetem

Podłącz urządzenie przewodowe, takie jak komputer, do portu WAN/LAN lub
LAN routera za pomocą kabla Ethernet.

Podłącz urządzenie przewodowe, jak smartfon, do sieci Wi-Fi routera, używając
Wi-Fi Name i Wi-Fi Key umieszczonych na etykiecie na spodniej ściance
routera.

Aby dokonać dalszej konfiguracji routera, na przykład zmiany nazwy Wi-Fi i klucza
Wi-Fi, zaloguj się do interfejsu przeglądarki internetowej routera odwiedzając
witrynę tendawifi.com na połączonym urządzeniu.

Wskazówki:
Jeśli nie można się zalogować do interfejsu przeglądarki internetowej routera, należy
zapoznać się z Q3 w FAQ.

I. Konfigurieren Sie den Router

Befestigen Sie die Antennen am Router.

1

Stecken Sie eine SIM-Karte in den Steckplatz auf der Unterseite des Routers.

2

12345A

6789

Mini-SIM-Karte Nano-SIM-Karte + AdapterMikro-SIM-Karte + Adapter

✓ ✓✓

Verwenden Sie das mitgelieferte Netzteil, um die PWR-Buchse des Routers mit

3

einer Stromquelle zu verbinden.

4

Drücken Sie die ON/OFF-Taste nach unten, um den Router einzuschalten. Die
LED-Anzeige beginnt zu leuchten.

Warten Sie einige Sekunden. Wenn die -LED-Anzeige aufleuchtet, ist der Router
erfolgreich mit dem Internet verbunden.

Tipps:
Wenn die -Kontrollleuchte nicht leuchtet, lesen Sie Q1 in den FAQ, um eine Lösung
zu finden.

II. Zugriff auf das Internet

Schließen Sie Ihr kabelgebundenes Gerät, z. B. einen Computer, mit einem
Ethernet-Kabel an den WAN/LAN- oder LAN-Port des Routers an.

Verbinden Sie Ihr drahtloses Gerät, z. B. ein Smartphone, mit dem
WLAN-Netzwerk des Routers indem Sie den Wi-Fi Name und das Wi-Fi Key,
die auf der Unterseite des Routers angegeben sind verwenden.

Für weitere Einstellungen, wie z. B. den WLAN-Namen und das WLAN-Passwort
zu ändern, melden Sie sich bei der Web-Benutzeroberfläche des Routers an,
indem Sie die Seite tendawifi.com mit einem angeschlossenen Gerät aufrufen.

Tipps:
Wenn Sie sich nicht bei der Web-Benutzeroberfläche des Routers anmelden können, lesen
Sie in den FAQ unter Q3 nach.

Antenna sockets

PWR

ON/OFF

RST/WPS

Deutsch

+

WAN/LAN LAN TEL

FAQ

Q1: The LED indicator does not light up. What should I do?
A1: Start a web browser, and access tendawifi.com:

If you are required to enter a PIN code to unlock the SIM card, contact your ISP
for the PIN code.
If you are required to enter APN parameters manually, enter these parameters
provided by your ISP.
If the LED indicator is still off after you finish the Quick Setup Wizard, your
SIM card may run out of money.

If the problem persists, contact your ISP for help.

Q2: I cannot access the internet after the configuration. What should I do?
A2: Ensure that the LED indicator lights solid on. If not, refer to Q1.

If the problem persists, try the following methods:

For wired devices, such as computers:

− Ensure that your computer is connected to port WAN/LAN or LAN properly.

− Ensure that your computer is set to obtain an IP address automatically and
obtain DNS server address automatically.

For wireless devices, such as smart phones:

− Ensure that your wireless device connects to the Wi-Fi network of the router
with the Wi-Fi name you set.

− Log in to the web UI and change your Wi-Fi name and Wi-Fi password on
Wi-Fi Settings > Wi-Fi Name & Password page. Then try again.

Q3: I cannot access the web UI of the router by visiting tendawifi.com. What
should I do?

A3: Try the following solutions.

If you log in with a wireless device:

Ensure that your wireless device is connected to the Wi-Fi network of the router.
Disable the cellular network of your wireless device.
Clear the cache of your web browser or change another web browser and try
again.

If you log in with a wired device:

Ensure that the computer has connected to the router properly.
Ensure that the IP address of your computer is 192.168.0.X (X ranges from 2 to

254). If not, unplug and replug one end of the Ethernet cable between the router
and the computer, and try again.
Clear the cache of your web browser or change another web browser and try
again.

If the problem persists, reset the router (hold down the RST/WPS button for about
8 seconds) and configure it again.

+

Q4: Why cannot I find the Wi-Fi signal of the router?
A4: Connect your computer to port WAN/LAN or LAN of the router to log in to the web

UI. Navigate to Wi-Fi Settings > Wi-Fi Name & Password:

Ensure that the wireless function is enabled. If not, enabled it and save the setting.
Search for the Wi-Fi signal again on your phone.
Ensure that the Hide function is disabled. If not, disable it and save the setting.
Search for the Wi-Fi signal again on your phone.

Q5: How to change my Wi-Fi name and password?
A5: Log in to the web UI of the router on your wired or wireless device, navigate to

Wi-Fi Settings > Wi-Fi Name & Password and customize your Wi-Fi name and
password.

Q6: Why cannot I access the internet with a SIM card under the wireless router
mode?

A6: The 3G/4G router mode and the wireless router mode are two different operating

modes. You can only use the SIM card to access the internet under the 3G/4G
router mode.

Q7: I cannot make and receive phone calls with my telephone connected to the
router?

A7: Try the following solutions:

Ensure that your telephone is connected to the TEL port of the router properly.
Ensure that your router is working under 3G/4G router mode with a SIM card
inserted.

Русский

I. Настройка маршрутизатора

Подключите антенну к роутеру.

1

Вставьте SIM-карту в разъем в нижней панели роутера.

2

12345A

6789

Мини-SIM-карта Нано-SIM-карта + адаптерМикро-SIM-карта + адаптер

✓ ✓✓

Используйте водящий в комплект адаптер питания для подключения

3

разъема PWR маршрутизатора к источнику питания.

4

Нажмите кнопку ON/OFF, чтобы отключить маршрутизатор. Загорается

+

+

светодиодный индикатор .

Подождите несколько секунд. Маршрутизатор успешно подключен к
интернету, если светодиодный индикатор горит.

Советы:
Если индикатор не загорается, обратитесь к Q1 в разделе FAQ, чобы решить
эту проблему.

II. Доступ в Интернет

Подключите свой компьютер или другое проводное устройство к
WAN/LAN-порту или LAN-порту на роутере по кабелю Ethernet.

Подключите свой смартфон или другое беспроводное устройство к Wi-Fi
роутеру, используя Wi-Fi Name и Wi-Fi Key, указанные на нижней панели
роутера.

Чтобы изменить имя Wi-Fi, пароль от Wi-Fi и прочие настройки, с помощью
подключенного устройства выполните вод в систему веб-интерфейса
через сайт tendawifi.com.

Советы:
Если вы не можете выполнить вод в систему веб-интерфейса маршрутизатора,
обратитесь к Q3 в FAQ (Часто задаваемы вопроса).

Français

I. Régler le routeur

Fixez les antennes au routeur.

1

Insérez une carte SIM dans la fente du panneau inférieur du routeur.

2

12345A

6789

Mini carte SIM Carte Nano SIM + AdaptateurMicro carte SIM + Adaptateur

✓ ✓✓

Utiliser l'adaptateur secteur fourni pour connecter la prise PWR du routeur à une

3

source d'alimentation.

4

Appuyer sur le bouton ON/OFF pour allumer le routeur. Le voyant LED

+

+

s'allume.

Patienter quelques secondes. Le routeur est connecté avec succès à internet lorsque
l’indicateur LED clignote.

Astuces:
Si l’indicateur ne s'allume pas, se référer à la question Q1 de FAQ pour trouver une
solution.

II. Accès à Internet

Connecter votre appareil filaire, notamment un ordinateur au port WAN/LAN ou
LAN du routeur à l’aide d’un câble Ethernet.

Connecter votre appareil sans fil, notamment un smartphone au réseau Wi-Fi du
routeur grâce au Wi-Fi Name et la Wi-Fi Key mentionnés sur le panneau inférieur
du routeur.

Pour continuer à configurer le routeur, notamment en changeant le nom du Wi-Fi et
la touche Wi-Fi, se connecter à l’IU web du routeur en visitant tendawifi.com sur
un appareil connecté.

Astuces:
Si vous n'arrivez pas à vous connecter à l'interface utilisateur Web du routeur, se référer à la

Q3 dans la section FAQ.

Bahasa Indonesia

I. Setel router

Memasang antena ke router.

1

Masukkan kartu SIM ke dalam slot di panel bawah router.

2

12345A

6789

Kartu SIM Mini Kartu SIM Nano + adaptorKartu SIM Mikro + adaptorL

✓ ✓✓

Gunakan adaptor daya yang disertakan untuk menghubungkan jek PWR router

3

ke sumber daya.

4

Tekan tombol ON/OFF untuk menyalakan router. Indikator LED menyala.

+

+

Tunggu sebentar. Router berhasil terhubung ke internet jika indikator LED
menyala.

Tips:
Jika indikator tidak menyala, baca Q1 di FAQ untuk menemukan solusi.

II. Mengakses internet

Sambungkan perangkat berkabel Anda, seperti komputer, ke port WAN/LAN
atau LAN router menggunakan kabel Ethernet.

Sambungkan perangkat nirkabel Anda, seperti ponsel pintar, ke jaringan Wi-Fi
router menggunakan Wi-Fi Name dan Wi-Fi Key yang berlabel di panel bawah
router.

Untuk mengonfigurasi router lebih lanjut, seperti mengubah Wi-Fi name dan Wi-Fi
key, login ke UI web UI router dengan mengunjungi tendawifi.com pada
perangkat yang tersambung.

Tips:
Jika Anda tidak dapat login ke UI web router, lihat Q3 di FAQ.

Español

I. Configurar su Router

Conecte las antenas al rúter.

1

Inserte una tarjeta SIM en la ranura del panel inferior del rúter.

2

12345A

6789

Tarjeta mini-SIM Tarjeta nano-SIM + AdaptadorTarjeta micro-SIM + Adaptador

✓ ✓✓

Utilice el adaptador de corriente suministrado para conectar el conector PWR del

3

router a una toma de corriente.

4

Pulse el botón ON/OFF para encender el router. Los indicadores LED de se

+

+

encienden.

Espere unos segundos. Cuando el router se haya conectado con éxito a Internet las
luces LED de se encenderán.

Consejos:
Si el indicador no se ilumina, consulte la Q1 en la sección FAQ para encontrar una
solución.

II. Acceso a Internet

Conecte el dispositivo con cable, por ejemplo, un ordenador a un puerto
WAN/LAN o LANdel router mediante un cable Ethernet.

Conecte su dispositivo inalámbrico, como un smartphone, a la red Wi-Fi del route
utilizando para ello el Wi-Fi Name y la Wi-Fi Key de la etiqueta en la parte
trasera del panel del router.

Para continuar configurando el router, como cambiar el nombre del Wi-Fi y su
clave, inicie sesión en la web UI del router visitando la página tendawifi.com del
dispositivo conectado.

Consejos:
Si no puede iniciar sesión en la web UI del router, consulte con la pregunta Q3 en FAQ
(Preguntas frecuentes).

Quick Installation Guide

N300 Wi-Fi 4G VoLTE Router

4G06

Package contents

4G VoLTE Router x 1
Power adapter x 1
Detachable antenna x 2
Telephone cable x 1
Ethernet cable x 1
Quick installation guide x 1

For product or function details, please go to www.tendacn.com to download the user guide.

Tiếng việt

I. Thiết lập bộ định tuyến

Gắn ăng-ten vào bộ định tuyến.

1

Lắp thẻ SIM vào khe trên bảng dưới cùng của bộ định tuyến.

2

12345A

6789

Thẻ SIM Mini Thẻ SIM Nano + bộ chuyển đổiThẻ SIM Micro + bộ chuyển đổi

✓ ✓✓

Sử dụng bộ chuyển đổi điện đi kèm để kết nối giắc cắm PWR của bộ định tuyến

3

vào nguồn điện.

Ấn nút ON/OFF (BẬT/TẮT) để bật bộ định tuyến. Đèn LED chỉ báo sáng.

4

+

+

Chờ vài giây. Khi đèn LED chỉ báo sáng thì có nghĩa là bộ định tuyến được kết nối
internet thành công.

Lời khuyên:
Nếu chỉ báo không sáng đèn, tham khảo Q1 trong phần FAQ (Các Câu Hỏi Thường Gặp)
để tìm giải pháp.

II. Truy cập vào internet

Kết nối thiết bị có dây của bạn, chẳng hạn như máy tính với cổng WAN/LAN hoặc
LAN của bộ định tuyến sử dụng cáp Ethernet.

Kết nối thiết bị không dây của bạn, chẳng hạn như điên thoại thông minh với
mạng Wi-Fi của bộ định tuyến sử dụng Wi-Fi Name và Wi-Fi Key được dán
nhãn ở bảng điều khiển dưới của bộ định tuyến.

Để cấu hình thêm bộ định tuyến, chẳng hạn như thay đổi tên Wi-Fi và khóa Wi-Fi,
đăng nhập vào giao diện người dùng web của bộ định tuyến bằng cách truy cập
vào tendawifi.com trên một thiết bị được kết nối.

Lời khuyên:
Nếu bạn không thể đăng nhâp vào giao diện người dùng web của bộ định tuyến, tham khảo
Q3 trong FAQ (Các Câu Hỏi Thường Gặp).

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules.
This equipment should be installed and operated with minimum distance 20cm
between the device and your body.

Caution:

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operating frequency: 2412-2462MHz
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation
interference, it is recommended to use a shielded RJ45 cable.

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
This equipment should be installed and operated with minimum distance 20cm
between the device and your body.

NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation
interference, it is recommended to use a shielded RJ45 cable.

Declaration of Conformity

Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio
equipment type 4G06 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: http://www.tendacn.com/en/service/download-cata-101.html

Operating Frequency:

2.4 GHz: EU/2400-2483.5MHz (CH1-CH13)
EIRP Power (Max.):

2.4 GHz < 20dBm
Software Version: V16.03.07.X

Español

DECLARACIÓN UE DE CONFORMIDAD SIMPLIFICADA
Por la presente, SHENZHEN TENDA TECHNOLOGY CO., LTD., declara que e1 tipo de equipo radioelectrico 4G06 es
conforme con 1a Directiva 2014/53/UE.
El texto completo de la declaratión UE de conformidad está disponible en la direcctión Internet siguiente:
http://www.tendacn.com/en/service/download-cata-101.html

Čeština

ZJEDNODUŏENÉ EU PROHLÁŏENÍ O SHODč
Tímto SHENZHEN TENDA TECHNOLOGY CO., LTD., prohlaŐuje, Ŭe typ rádiového zaňízení 4G06 je v souladu se smĎrnicí
2014/53/EU.
Úplné znĎní EU prohláŐení o shodĎ je k dispozici na této internetové adrese:
http://www.tendacn.com/en/service/download-cata-101.html

Deutsch

VEREINFACHTE EU-KONFORMITÄTSERKLÄRUNG
Hiermit erklärt SHENZHEN TENDA TECHNOLOGY CO., LTD., dass der Funkanlagentyp 4G06 der Richtlinie 2014/53/EU
entspricht.
Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:
http://www.tendacn.com/en/service/download-cata-101.html

Français

DECLARATION UE DE CONFORMITE SIMPLIFIEE
Le soussigné, SHENZHEN TENDA TECHNOLOGY CO., LTD., déclare que l'équipement radioélectrique du type 4G06
est conforme à la directive 2014/53/UE.
Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante:
http://www.tendacn.com/en/service/download-cata-101.html

Italiano

DICHIARAZIONE DI CONFORMITÀ UE SEMPLIFICATA
Il fabbricante, SHENZHEN TENDA TECHNOLOGY CO., LTD., dichiara che il tipo di apparecchiatura radio 4G06 è
conforme alla direttiva 2014/53/UE.
Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet:
http://www.tendacn.com/en/service/download-cata-101.html

Polski

UPROSZCZONA DEKLARACJA ZGODNOŚCI UE
SHENZHEN TENDA TECHNOLOGY CO., LTD. niniejszym oświadcza, że typ urządzenia radiowego 4G06 jest zgodny z
dyrektywą 2014/53/UE.
Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym:
http://www.tendacn.com/en/service/download-cata-101.html

Português

DECLARAÇÃO UE DE CONFORMIDADE SIMPLIFICADA
O(a) abaixo assinado(a) SHENZHEN TENDA TECHNOLOGY CO., LTD. declara que o presente tipo de equipamento
de rádio 4G06 está em conformidade com a Diretiva 2014/53/UE.
O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet:
http://www.tendacn.com/en/service/download-cata-101.html

Română

DECLARAŢIA UE DE CONFORMITATE SIMPLIFICATĂ
Prin prezenta, SHENZHEN TENDA TECHNOLOGY CO., LTD. declară că tipul de echipamente radio 4G06 este în
conformitate cu Directiva 2014/53/UE.
Textul integral al declaraţiei UE de conformitate este disponibil la următoarea adresă internet:
http://www.tendacn.com/en/service/download-cata-101.html

Русский

Декларация соответствия
Настоящим, SHENZHEN TENDA TECHNOLOGY CO. LTD. заявляет, что радиооборудование типа 4G06
соответствует Директиве 2014/53 / ЕС.
Полный текст декларации соответствия ЕС доступен по следующему интернет-адресу:
http://www.tendacn.com/en/service/download-cata-101.html

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic
equipment (WEEE). This means that this product must be handled pursuant to
European directive 2012/19/EU in order to be recycled or dismantled to minimize its
impact on the environment.
User has the choice to give his product to a competent recycling organization or to the
retailer when he buys new electrical or electronic equipment.

Caution：

Manufacturer: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
Adapter Model: BN037-A12012E, BN037-A12012B
Input: 100-240V AC 50/60Hz 0.4A
Output: 12V/1A
: DC Voltage

Operating Environment

Temperature: 0°C-40°C
Humidity: (10 - 90) %RH, non-condensing

Technical Support

Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052

USA hotline: [phone]
Toll Free: 7 x 24 hours

Canada hotline: [phone]
Toll Free: Mon - Fri 9 am - 6 pm PST

Hong Kong hotline: [phone]

Global hotline: [phone] (China Time Zone)
Website: www.tendacn.com
E-mail: [e-mail]

Copyright

© 2020 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
is a registered trademark legally held by Shenzhen Tenda Technology
Co., Ltd. Other brand and product names mentioned herein are trademarks or
registered trademarks of their respective holders. Specifications are subject to
change without notice.