PLIXUS
RELEASE NOTES
Copyright Statement
No part of this publication or documentation accompanying this product may be reproduced in any form
or by any means or used to make any derivative such as translation, transformation, or adaptation
without the prior written permission of the publisher, except in case of brief quotations embodied in
critical articles or reviews. Contents are subject to change without prior notice.
Copyright © 2019 by Televic Conference NV. All rights reserved.
The authors of this manual have made every effort in the preparation of this book to ensure the accuracy
of the information. However, the information in this manual is supplied without warranty, either express
or implied. Neither the authors, Televic Conference NV, nor its dealers or distributors will be held liable for
any damages caused or alleged to be caused either directly or indirectly by this book.
Trademarks
All terms mentioned in this manual that are known to be trademarks or service marks have been
appropriately capitalized. Televic NV cannot attest to the accuracy of this information. Use of a term in
this book should not be regarded as affecting the validity of any trademark or service mark.
DOCUMENT HISTORY
Version Date Description
0.1
0.2
0.3
0.4
1.0
1.1
1.2
1.3
2019-05-28 Release notes version 6.0
2019-06-17 Added compatibility notice
2019-06-18 Internal issue tracking reference codes added to relevant issues
2019-06-18 Added UNIMM-3237 to known limitations
2019-08-08 Release notes version 6.0.1
2019-08-28 Release notes version 6.0.2
2019-09-03 Added release notes of 5.2, 5.3 and 5.4 releases
2019-10-16 Added release notes of version 6.0.3
1.4
1.4.1
2019-10-29 Added release notes of version 6.1.12
2019-11-13 Updated release notes for 6.1.12
RELEASE NOTES 3
CONTENTS
Document history ...................................................................................................... 3
RELEASE NOTES ......................................................................................................... 5
IMPORTANT COMPATIBILITY NOTICE ...................................................................................................... 5
PLIXUS 6.1.12 ......................................................................................................................................... 5
PLIXUS 6.0.16 ......................................................................................................................................... 8
PLIXUS 6.0.12 ......................................................................................................................................... 9
PLIXUS 6.0.1 ......................................................................................................................................... 10
PLIXUS 6.0 ............................................................................................................................................ 11
PLIXUS 5.4.24 ....................................................................................................................................... 14
PLIXUS 5.3.34 ....................................................................................................................................... 16
PLIXUS 5.2.25 ....................................................................................................................................... 17
RELEASE NOTES 4
RELEASE NOTES
IMPORTANT COMPATIBILITY NOTICE
When updating your Plixus system to the latest CRP version, please make sure to update your CoCon
software to the version with the same major number. E.g. when updating to CRP 6.0, CoCon 6.0 must be
used.
PLIXUS 6.1.12
WHAT’S NEW
• Improved scrolling and zooming in PDF documents on uniCOS
• Improved visual feedback on pressing buttons in the uniCOS UI
• Configurable standby screen on uniCOS with date/time, colors or background image
• Added video overlay possibility on standby screen on uniCOS
• Added microphone controls on uniCOS for chairperson units
• Added configurable uniCOS tabs
• Added traditional Chinese as uniCOS interface language
• Added support for a temporary request session
• Entering the menu on Lingua Interpreter Desk now requires the user to press the rotary button to
avoid accidentally opening the menu
• Added a sound notification when reaching the end of the language list on Lingua Interpreter Desk
FIXED ISSUES
• Fixed an issues where in rare occasions, uniCOS devices don’t start up due to corrupt files in the
filesystem (UNIMM-3383)
• Fixed an issue on the central unit’s web page where in some occasions loudspeaker volume was
set to 0dB where it was actually -96dB (UNIMM-3348)
• Fixed an issue with some log files which were not available in the log file download from the
central unit’s web page (UNIMM-3337)
• Fixed an issue where the default loudspeaker volume was set to the default value after rebooting
the central unit (UNIMM-3333)
• Fixed an issue on Lingua Interpreter Desk where in some cases no other headset type than TEL15
could be selected (UNIMM-3309)
RELEASE NOTES 5
• Fixed an issue where in some cases the software updated show up as failed on some central unit’s
web page but actually it succeeded (UNIMM-3307)
• Fixed an issue where in some cases documents were kept on uniCOS devices causing the device’s
storage to be full (UNIMM-3305)
• Fixed an issue where in some cases initialization would fail when coupling a WCAP G3 to a Plixus
central unit (UNIMM-3285)
• Fixed an issue on uniCOS messaging where messages could be shown on a unit after a delegate
moved to another seat (UNIMM-3277)
• Fixed an issue where in some cases a delegate is not removed from the reply list on uniCOS
devices when the microphone for that delegate is activated (UNIMM-3265)
• Fixed an issue where in some cases the default loudspeaker volume is reset to 0dB after opening
initialization on the central unit’s web page (UNIMM-3246)
• Fixed an issue where headphone mute does not work on the right side channel selector for
Confidea D2I units (UNIMM-3240)
• Fixed an issue with microphone state API notifications (UNIMM-3228)
• Fixed an issue where changing the ‘from relay’ field in CoCon always resulted in showing ‘floor’
for an active booth (UNIMM-3227)
• Fixed an issue with the API event viewer on the central unit, which was showing incorrect time
stamps (UNIMM-3147)
• Fixed an issue where in some cases the headphone volume on uniCOS devices is sometimes not
on the default setting after startup (UNIMM-3139)
• Fixed an issue where in rare occasions, uniCOS units could restart after receiving larger documents
(UNIMM-3111)
• Fixed an issue with channel selectors not being muted on Confidea 2D2I units when a
microphone was activated (UNIMM-2560)
• Fixed an issue where the license file was not part of the backup of a central unit (UNIMM-2516)
• Fixed an issue with automatically setting backup nodes for the audio configurations (UNIMM-
3269)
• Fixed an issue where in rare occasions activating and deactivating microphones while a
microphone on any Lingua Interpreter Desk is active could result in short audio distortions on the
floor (UNIMM-1197)
• Fixed an issue where in some cases the LED on a Plixus AE-R engine would not light up when
starting a recording (UNIMM-3534)
KNOWN LIMITATIONS
• After a system reboot, relay settings are not correctly set on Lingua Interpreter Desks connected in
a branch (UNIMM-3527)
• While a delegate unit’s LED is flashing, the LED of the connected Plixus Nameplate is not flashing
in sync (UNIMM-3510)
RELEASE NOTES 6
• The Plixus Nameplate LED is not flashing when slowdown is requested or a speech timer warning
is reached (UNIMM-3509)
• In some cases after inserting a badge into a uniCOS device, the delegate’s info might not be
updated until the microphone is turned off and on again (UNIMM-3508)
• In rare cases, uploading very large documents or many smaller documents at the same time does
not work (UNIMM-3363)
• When audience indication is enabled there is a delay in handling microphone button press events
(UNIMM-3352)
• The quorum presence check is not working on uniCOS devices when voting option ‘0’ is not
enabled (UNIMM-3331)
• Forcing a specific video stream which is not selectable on a V-OUT is not working (UNIMM-3179)
• In some cases, newer generation Lingua Interpreter Desks could show a white line at the bottom
of the screen (UNIMM-3017)
• In rare cases enabling the reply button on a uniCOS device enables the chairperson functions
(UNIMM-3011)
• When updating a Plixus AE-R unit from 5.2 to 5.3 and a WCAP G3 is coupled, the initialization
could be set to open access and the manual initialization needs to be redone (UNIMM-2497)
• Upon meeting start, badges inserted in wireless units are not read until re-inserted (UNIMM-2413)
• After a system reboot without rebooting the wireless delegate units, the channel selectors are not
updated until the WCAP is restarted (UNIMM-2409)
• When applying a video configuration with CoCon Video Manager and the configuration routes a
specific, available for delegates stream to either V-OUT or Lingua Interpreter desk MM and this
stream is not stream 1, a system restart may be required before this video configuration is applied
(UNIMM-3545)
• WCAP units are shown in branches incorrectly on Plixus Diagnostics (UNIMM-3536)
• After stopping a meeting using the reply functionality, uniCOS units may still show the dedicated
reply button (UNIMM-3551)
RELEASE NOTES 7
PLIXUS 6.0.16
FIXED ISSUES
• Fixed an issue with the startup of multimedia units
• Fixed an issue where the Lingua Interpreter Desk could in rare cases become unresponsive when
downgrading to 5.x
• Fixed an issue where the Lingua Interpreter Desk headset selection would automatically return to
default instead of the chosen selection
• The Plixus Nameplate LED is now synchronized with the microphone LED
RELEASE NOTES 8
PLIXUS 6.0.12
FIXED ISSUES
• Fixed an issue with V-REQ button press activation caused the unit to have the same capability
twice (UNIMM-3356)
• Fixed an issue where in some cases Lingua Interpreter desks don’t start up after an update
(UNIMM-3358)
KNOWN LIMITATIONS
• Resetting and adjusting the default channel selector volume is not working from the CoCon
Room Configurator (UNIMM-3338)
• After rebooting the central unit, the UI is showing the default value for the loudspeaker volume
although the selected volume is applied (UNIMM-3333)
• Headset type selection on Lingua ID is not working (UNIMM-3309)
• When opening the initialization, the loudspeaker volume is reset to the default value (UNIMM-
3246)
• SeatDiscussionStateChanged and SpeakerListChanged events are not generated when a DANTE
enabled seat’s microphone is turned off (UNIMM-3146)
RELEASE NOTES 9
PLIXUS 6.0.1
FIXED ISSUES
• Fixed an issue with initialization of Confidea G3 units in coupled mode (UNIMM-3285)
• Fixed an issue when using slowdown on Lingua ID where in some occasions the system might
become unresponsive when this function is triggered (UNIMM-3303)
KNOWN LIMITATIONS
• Resetting and adjusting the default channel selector volume is not working from the CoCon
Room Configurator (UNIMM-3338)
• After rebooting the central unit, the UI is showing the default value for the loudspeaker volume
although the selected volume is applied (UNIMM-3333)
• Headset type selection on Lingua ID is not working (UNIMM-3309)
• When opening the initialization, the loudspeaker volume is reset to the default value (UNIMM-
3246)
• SeatDiscussionStateChanged and SpeakerListChanged events are not generated when a DANTE
enabled seat’s microphone is turned off (UNIMM-3146)
RELEASE NOTES 10
PLIXUS 6.0
WHAT’S NEW
• Support for VIP delegate mode
• Support for multi-stream video routing
• Support for Intercom between delegates and/or interpreter booths
TM
• Support for Dante
• Support for seat labels on the Plixus Core web page
• Removed support for CoCon for Plixus (CoCon ‘classic’) and the previous Plixus web page
• Add system Diagnostics on the central unit web page to monitor units, branches and loops
• Support for Hebrew and Thai as a uniCOS interface language (UNIMM-3051)
-on-seat, use external audio channels with discussion capabilities
• Added a startup screen to Lingua Interpreter desks (UNIMM-3017)
• Added full support for reply functionality (UNIMM-2953)
• Added blue as a microphone button color when the unit is in an intercom call (UNIMM-2951)
• Added support for displaying additional info on Lingua Interpreter desks such as serial number
and software versions (UNIMM-2847)
• Added support for manual initialization of voting only units (UNIMM-2696)
FIXED ISSUES
• Fixed an issue with OLED displays on flush mount channel selectors not working when connected
to uniBOX generation 1 (UNIMM-3140)
• Fixed an issue where CoCon Signage could not be used if a CoCon Nameplate license was not
present on the system (UNIMM-3113)
• Fixed an issue with slower microphone event responses when units were disconnecting from and
reconnecting to the system (UNIMM-3112)
• Fixed an issue where in some cases coupled wireless delegate units were not showing up after a
reboot of the Plixus central unit (UNIMM-3053)
• Fixed an issue on the Lingua Interpreter desk’s UI where the selected microphone was not
updated after changing the selected microphone (UNIMM-3034)
• Fixed an issue where in some occasions, the microphone activation no longer worked after
assigning a unit to a seat (UNIMM-3033)
• Fixed an issue where some audio inputs could not be added to the audio input or output groups
(UNIMM-3031)
• Fixed an issue where in some cases, some units were shown as ‘other’ on the Plixus web page
(UNIMM-3018)
RELEASE NOTES 11
• Fixed an issue with headset volume control on Lingua Interpreter desks (UNIMM-2976)
• Fixed an issue with some central unit types not remembering the current date and time after a
reboot (UNIMM-2971)
• Fixed an issue with the reply functionality on the uniCOS interface (UNIMM-2956)
• Fixed an issue with incorrect software version references in the configuration file (UNIMM-2942)
• Improved position of the middle name on the uniCOS interface (UNIMM-2926)
• Fixed an issue where in some cases not all units were detected when initialization is in open
access mode (UNIMM-2919)
• Improved device sorting and device names on the Plixus Core web page (UNIMM-2887)
• Improved security vulnerability on PHP (UNIMM-2884)
• Fixed an issue with the slowdown setting persistence on Lingua Interpreter desks after rebooting
the system (UNIMM-2842)
• Fixed an issue with incorrect assignment of two languages to a booth when using the
addChannel API on an already used channel (UNIMM-2810)
• Fixed an issue with updated unit extension states not being displayed correctly on the Plixus Core
web page (UNIMM-2712)
TM
• Fixed an issue where automatically routing interpretation channels to Dante
channels was also
applied to custom audio configurations (UNIMM-2619)
• Fixed an issue with intercom on flush mount units (UNIMM-2506)
• Fixed an issue with changing loudspeaker channels on the Lingua Interpreter desk (UNIMM-2504)
• Limit the number of characters for an audio configuration name (UNIMM-2233)
• Fixed an issue where the locked front panel knob for changing the speaker volume was unlocked
after a reboot of the central unit (UNIMM-1224)
• Improved discussion mode naming consistency between Confidea G3 and Plixus Core web pages
(UNIMM-771)
• In rare occasions some coupled WCAP’s incorrectly show a pink LED (UNIMM-3114)
KNOWN LIMITATIONS
• SeatDiscussionStateChanged and SpeakerListChanged events are not yet sent when a DanteTM
enabled seat is turned off, to avoid this the system must first be rebooted after enabling DanteTM
on seats (UNIMM-3146)
• When sending very large documents (100+ Mb) to uniCOS devices, in some occasions the device
may restart (UNIMM-3111)
• In rare occasions, enabling the reply button for uniCOS devices results in chairman functionalities
on that unit (UNIMM-3011)
• The configuration backup of a central unit does not contain its license file (UNIMM-2516)
RELEASE NOTES 12
• In rare occasions, after a system reboot, the headphone volume setting on uniCOS devices is set
to 0 dB instead of the default volume setting (UNIMM-3139)
• In some occasions, changing a Lingua Interpreter desk’s number on the Plixus Core web page
results in an incorrect interpretation configuration (UNIMM-3137)
• When in direct speak mode, a user can still put seats in request mode using the Plixus Core
operator web page (UNIMM-3029)
• In rare occasions, channels selectors on Confidea G3 units are not updated after a system reboot
(UNIMM-2409)
• Confidea G3 units and WCAP need to be updated to version 3.2.4 or higher to be compatible
with Plixus 6.0
• When disabling the reply function, the reply list is not cleared (UNIMM-3237)
RELEASE NOTES 13
PLIXUS 5.4.24
WHAT’S NEW
• Support for Thai in uniCOS interface
FIXED ISSUES
• Fixed an issue where in some occasions a headphone connected to uniCOS had no sound
• Fixed an issue with headphone mute persistency
• Fixed an issue with reply settings for units with a dedicated reply button
• Fixed an issue where in rare occasions some microphones for uniCOS units were not working
directly after system startup
• Fixed an issue with swapping units
• Fixed an issue with Desfire badge detection
• Fixed an issue where documents stored on the central unit were not replaced if uploaded again
• Fixed an issue with invalid responses for connection ID expiration on Plixus REST API
• Fixed an issue with middle name positioning in the uniCOS interface
• Fixed an issue where in rare occasions, some units were not detected in open access initialization
mode
• Fixed an issue where changing the default headphone volume resulted in a reset of the channel
selection to the floor channel
• Fixed an issue where individual button presses were still received through API when selecting
secret voting
• Fixed an issue where in rare occasions, an interpreter channel was no longer selectable on uniCOS
units
• Fixed an issue where a reset of the Lingua ID configuration did not reset the channels in case
audience indication is enabled
• Fixed an issue where in some occasions, the video stream numbers were not respected by the
video selection board.
• Fixed an issue with muting headphones
• Fixed an issue with incorrect microphone LED indication on Confidea 2D2I units
RELEASE NOTES 14
KNOWN ISSUES
• Several issues with Intercom. Not advised to use this version if intercom is required.
• Volume control from Confidea chairman units doesn’t work
• Updates page will show all units that have ever been connected to the engine.
• After update of Plixus AE-R in combination with WCAP G3 from 5.2 to 5.3, the initialization is
changed to open access. This means the WCAP needs to be uncoupled from the Plixus AE-R
before updating.
• The backup for the central unit configuration does not include the license file
RELEASE NOTES 15
PLIXUS 5.3.34
FIXED ISSUES
• Fixed an issue with configurations with Plixus AE-R and Plixus network extenders not supported
• Fixed an issue where in some cases communication failures between the Plixus Central Unit and
the CoCon Room Server may cause the synoptic view in the CoCon Room Configurator to be lost.
• Fixed an issue with Audience indication in the CoCon Interpreter Application.
• Fixed an issue where two software updates were required to support new units such as the Plixus
Nameplate
• Fixed an issue where in rare cases the Confidea flush mount Dual Delegate board did not
recognize the button board connected to it
• Fixed an issue where in rare cases the initialization is not saved after initializing
• Fixed an issue with Confidea G3 coupling override when using a maximum of 6 mics
• Fixed an issue with the auto-floor feature
KNOWN ISSUES
• Several issues with Intercom. Not advised to use this version if intercom is required.
• When opening initialization after a WCAP takeover was done, units are still associated with the
original WCAP
• Changing of loudspeaker channel on Lingua ID is not functioning
• Updates page will show all units that have ever been connected to the engine.
• With Plixus Core, the headphone is not automatically muted with activation of microphone.
• After update of Plixus AE-R in combination with WCAP G3 from 5.2 to 5.3, the initialization is
changed to open access. This means the WCAP needs to be uncoupled from the Plixus AE-R
before updating
RELEASE NOTES 16
PLIXUS 5.2.25
FIXED ISSUES
• Fixed an issue where in some cases there could be interference on Confidea-F units
• Fixed an issue where in some cases Lingua-ID units would not start up correctly
• Fixed an issue on Confidea-T 2D2I where in some cases noise could be heard when activating
the left microphone button
• Fixed a memory issue on Plixus Core when using 1000+ units
RELEASE NOTES 17
TELEVIC CONFERENCE
Leo Bekaertlaan 1
8870 Izegem
Belgium
+32 51 30 30 45
Loading...