TECOR DK025L, DK020L, DK015L, D8025L, D8020L Datasheet

...
0 (0)

Thyristor

Product

Catalog

Teccor Electronics

1800 Hurd Drive

Irving, Texas 75038

United States of America

Phone: +1 972-580-7777

Fax: +1 972-550-1309 Website: http://www.teccor.com E-mail: power.techsales@teccor.com

©2002 Teccor Electronics

i

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Teccor Electronics reserves the right to make changes at any time in order to improve designs and to supply the best products possible. The information in this catalog has been carefully checked and is believed to be accurate and reliable; however, no liability of any type shall be incurred by Teccor for the use of the circuits or devices described in this publication. Furthermore, no license of any patent rights is implied or given to any purchaser.

Teccor Electronics is the proprietor of the QUADRAC® trademark. is a registered trademark of Underwriters Laboratories, Inc. All other brand names may be trademarks of their respective companies. To conserve space in this catalog, the trademark sign (®) is omitted.

http://www.teccor.com

ii

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog

Contents

Product Selection Guide

Product Descriptions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vi Circuit Requirement Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vii Product Packages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - viii Description of Part Numbers- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - x Quality and Reliability Assurance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - xii Standard Terms and Conditions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - xiv

Data Sheets

V-I Characteristics of Thyristor Devices - - - - - - - - - - - - - - - - - - - - - - - - E0-2 Electrical Parameter Terminology - - - - - - - - - - - - - - - - - - - - - - - - - - - - E0-3 Electrical Specifications

Sensitive Triacs- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E1 Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E2 QUADRACs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E3 Alternistor Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E4 Sensitive SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E5 SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E6 Rectifiers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E7 Diacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E8 SIDAC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E9

Mechanical Specifications

Package Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M1 Lead Form Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M2 Packing Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - M3

Application Notes

Fundamental Characteristics of Thyristors - - - - - - - - - - - - - - - - - - - AN1001 Gating, Latching, and Holding of SCRs and Triacs - - - - - - - - - - - - - AN1002 Phase Control Using Thyristors- - - - - - - - - - - - - - - - - - - - - - - - - - - AN1003 Mounting and Handling of Semiconductor Devices - - - - - - - - - - - - - AN1004 Surface Mount Soldering Recommendations - - - - - - - - - - - - - - - - - AN1005 Testing Teccor Semiconductor Devices

Using Curve Tracers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AN1006 Thyristors Used As AC Static Switches and Relays - - - - - - - - - - - - AN1007 Explanation of Maximum Ratings and Characteristics for Thyristors - AN1008 Miscellaneous Design Tips and Facts - - - - - - - - - - - - - - - - - - - - - - AN1009 Thyristors for Ignition of Fluorescent Lamps - - - - - - - - - - - - - - - - - - AN1010

Appendix

Cross Reference Guide - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A1 Part Numbers Index- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A27

©2002 Teccor Electronics

iii

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

http://www.teccor.com

iv

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog

Product Selection Guide

Product Descriptions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

P 2

Circuit Requirement Diagram - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- P 3

Product Packages - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

P 4

Description of Part Numbers- - - - - - - - - - - - - - - - - - - - - - - - - - - - -

P 6

Quality and Reliability Assurance - - - - - - - - - - - - - - - - - - - - - - - - -

P 8

Standard Terms and Conditions - - - - - - - - - - - - - - - - - - - - - - - - -

P 10

©2002 Teccor Electronics

P - 1

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Product Descriptions

Thyristors

A thyristor is any semiconductor switch with a bi-stable action depending on p-n-p-n regenerative feedback. Thyristors are normally twoor three-terminal devices for either unidirectional or bidirectional circuit configurations. Thyristors can have many forms, but they have certain commonalities. All thyristors are solid state switches that are normally open circuits (very high impedance), capable of withstanding rated blocking/off-state voltage until triggered to on state. When triggered to on state, thyristors become a low-impedance current path until principle current either stops or drops below a minimum holding level. After a thyristor is triggered to on-state condition, the trigger current can be removed without turning off the device. Thyristors are used to control the flow of electrical currents in applications including:

Home appliances (lighting, heating, temperature control, alarm activation, fan speed)

Electrical tools (for controlled actions such as motor speed, stapling event, battery charging)

Outdoor equipment (water sprinklers, gas engine ignition, electronic displays, area lighting, sports equipment, physical fitness)

Sensitive Triacs

Teccor's sensitive gate triacs are AC bidirectional silicon switches that provide guaranteed gate trigger current levels in Quadrants I, II, III, and IV. Interfacing to microprocessors or other

equipment with single polarity gate triggering is made possible with sensitive gate triacs. Gate triggering currents of 3 mA, 5 mA,

10 mA, or 20 mA may be specified.

Sensitive gate triacs are capable of controlling AC load currents from 0.8 A to 8 A rms and can withstand operating voltages from 200 V to 600 V.

Triacs

Teccor's triac products are bidirectional AC switches, capable of controlling loads from 0.8 A to 35 A rms with 10 mA, 25 mA, and 50 mA IGT in operating Quadrants I, II and III.

Triacs are useful in full-wave AC applications to control AC power either through full-cycle switching or phase control of current to the load element. These triacs are rated to block voltage in the “OFF” condition from 200 V minimum with selected products capable of 1000 V operation. Typical applications include motor speed controls, heater controls, and incandescent light controls.

Quadrac

Quadrac devices, originally developed by Teccor, are triacs and alternistor triacs with a diac trigger mounted inside the same package. These devices save the user the expense and assembly time of buying a discrete diac and assembling in conjunction with a gated triac.

The Quadrac is offered in capacities from 4 A to 15 A rms and voltages from 200 V ac to 600 V ac.

Alternistor Triacs

The Teccor alternistor is specifically designed for applications required to switch highly inductive loads. The design of this special chip effectively offers the same performance as two thyristors (SCRs) wired inverse parallel (back-to-back).

This new chip construction provides the equivalent of two electri- cally-separate SCR structures, providing enhanced dv/dt characteristics while retaining the advantages of a single-chip device.

Teccor manufactures 6 A to 40 A alternistors with blocking voltage rating from 200 V to 1000 V. Alternistors are offered in TO-220, TO-218, and TO-218X packages with isolated and non-isolated versions.

Sensitive SCRs

Teccor's sensitive gate SCRs are silicon-controlled rectifiers representing the best in design, performance, and packaging techniques for lowand medium-current applications.

Anode currents of 0.8 A to 10 A rms can be controlled by sensitive gate SCRs with gate drive currents ranging from 12 µA to 500 µA. Sensitive gate SCRs are ideally suited for interfacing to integrated circuits or in applications where high current load requirements and limited gate drive current capabilities exist. Examples include ignition circuits, motor controls, and DC latching for alarms in smoke detectors. Sensitive gate SCRs are available in voltage ratings to 600 V ac.

SCRs

Teccor's SCR products are half-wave, silicon-controlled rectifiers that represent the state of the art in design and performance.

Load current capabilities range from 1 A to 70 A rms, and voltages from 200 V to 1000 V may be specified to meet a variety of application needs.

Because of its unidirectional switching capability, the SCR is used in circuits where high surge currents or latching action is required. It may also be used for half-wave-type circuits where gate-con- trolled rectification action is required. Applications include crowbars in power supplies, camera flash units, smoke alarms, motor controls, battery chargers, and engine ignition.

Surge current ratings are available from 30 A in the TO-92 packaging to 950 A in the TO-218X package.

Rectifiers

Teccor manufactures 15 A to 25 A rms rectifiers with voltages rated from 200 V to 1000 V. Due to the electrically isolated TO-220 package, these rectifiers may be used in common anode or common cathode circuits using only one part type, thereby simplifying stock requirements.

Diacs

Diacs are trigger devices used in phase control circuits to provide gate pulses to a triac or SCR. They are voltage-triggered bidirectional silicon devices housed in DO-35 glass axial lead packages and DO-214 surface mount packages.

Diac voltage selections from 27 V to 45 V provide trigger pulses closely matched in symmetry at the positive and negative breakover points to minimize DC component in the load circuit.

Some applications include gate triggers for light controls, dimmers, power pulse circuits, voltage references in AC power circuits, and triac triggers in motor speed controls.

Sidacs

Sidacs represent a unique set of thyristor qualities. The sidac is a bidirectional voltage triggered switch. Some characteristics of this device include a normal 95 V to 330 V switching point, negative resistance range, latching characteristics at turn-on, and a low onstate voltage drop.

One-cycle surge current capability up to 20 A makes the sidac an ideal product for dumping charged capacitors through an inductor in order to generate high-voltage pulses. Applications include light controls, high-pressure sodium lamp starters, power oscillators, and high-voltage power supplies.

http://www.teccor.com

P - 2

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog(972) 580-7777

Circuit Requirement Diagram

BILATERAL VOLTAGE

RECTIFIER

REVERSE BLOCKING

BIDIRECTIONAL

BILATERAL

 

SWITCH

 

THYRISTOR

THYRISTOR

VOLTAGE TRIGGER

 

 

 

 

 

 

 

 

 

 

 

 

 

DIAC *

 

SIDAC *

 

RECTIFIER *

 

 

 

 

 

 

 

 

 

GATE CURRENT

12-500 A

10-50 mA

 

 

GATE CONTROL

DIAC TRIGGER

DIRECT

 

 

 

 

 

OPTIONS

 

 

 

QUADRANT OPERATION

SCR (Sensitive) *

SCR *

 

 

 

INTERNAL

EXTERNAL

 

 

(See Quadrant Chart on Data Sheet)

 

 

 

 

 

 

 

 

 

 

I

I I I I I

I I I I I I I V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIACS *

 

GATE CURRENT

 

GATE CURRENT

 

 

 

 

 

 

 

 

 

 

3-20 mA

 

 

 

 

 

 

 

 

 

10-100 mA

 

 

 

QUADRAC *

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ALTERNISTOR TRIAC *

TRIAC *

SENSITIVE TRIAC *

* For detailed information, see specific data sheet in product catalog.

©2002 Teccor Electronics

P - 3

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Product Packages

Isolated Mounting Tab

Package Code

G

Y

S

C

E

L

K

J

P

Product

 

Current

 

 

 

 

 

 

 

TO-3

Type

 

(Amps)

DO-15 DO-35

DO-214

Compak

TO-92 *

TO-220

TO-218

TO-218X

Fastpak

 

 

0.8

 

 

 

 

 

 

 

 

Sensitive

 

1

 

 

 

 

 

 

 

 

Triac

 

4

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

0.8

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

Triac

 

6

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

 

 

35

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

Quadrac

 

6

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

Alternistor

 

12

 

 

 

 

 

 

 

 

 

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

 

 

30

 

 

 

 

 

 

 

 

 

 

35

 

 

 

 

 

 

 

 

 

 

40

 

 

 

 

 

 

 

 

 

 

0.8

 

 

 

 

 

 

 

 

 

 

1.5

 

 

 

 

 

 

 

 

Sensitive

 

4

 

 

 

 

 

 

 

 

SCR

 

6

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

12

 

 

 

 

 

 

 

 

SCR

 

15

 

 

 

 

 

 

 

 

 

16

 

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

 

 

35

 

 

 

 

 

 

 

 

 

 

40

 

 

 

 

 

 

 

 

 

 

55

 

 

 

 

 

 

 

 

 

 

65

 

 

 

 

 

 

 

 

 

 

70

 

 

 

 

 

 

 

 

Rectifier

 

15

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

Diac

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sidac

 

 

 

*

 

 

 

 

* No center lead on TO-92 Sidacs.

http://www.teccor.com

P - 4

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog(972) 580-7777

Product Packages

 

 

Non-isolated Mounting Tab

 

 

Package Code

F

R

M

W

D

V

N

 

 

 

 

TO-252

TO-251

TO-263

Current

 

Product

 

TO-202

TO-220

TO-218

TO-218X

D-Pak

V-Pak

D2Pak

(Amps)

 

Type

 

 

 

 

 

 

 

 

0.8

 

 

 

 

 

 

 

 

 

 

1

 

Sensitive

 

 

 

 

 

 

 

 

4

 

Triac

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

0.8

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

6

 

Triac

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

 

 

35

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

6

 

Quadrac

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

12

 

Alternistor

 

 

 

 

 

 

 

 

16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

 

 

30

 

 

 

 

 

 

 

 

 

 

35

 

 

 

 

 

 

 

 

 

 

40

 

 

 

 

 

 

 

 

 

 

0.8

 

 

 

 

 

 

 

 

 

 

1.5

 

 

 

 

 

 

 

 

 

 

4

 

Sensitive SCR

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

12

 

 

 

 

 

 

 

 

 

 

15

 

SCR

 

 

 

 

 

 

 

 

16

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

 

 

35

 

 

 

 

 

 

 

 

 

 

40

 

 

 

 

 

 

 

 

 

 

55

 

 

 

 

 

 

 

 

 

 

65

 

 

 

 

 

 

 

 

 

 

70

 

 

 

 

 

 

 

 

 

 

15

 

Rectifier

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

25

 

 

 

 

 

 

 

 

 

 

 

Diac

 

 

 

 

 

 

 

 

 

Sidac

 

 

 

 

 

 

 

 

 

 

 

 

©2002 Teccor Electronics

P - 5

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Description of Part Numbers

Sensitive Triac

L

20 04

F

 

5

12 X

 

 

 

 

 

 

 

Device Type

L = Sensitive Triac

Voltage Rating 20 = 200 V 40 = 400 V 60 = 600 V

Current Rating X8 = 0.8 A

N = 1 A

01 = 1 A

04 = 4 A

06 = 6 A

08 = 8 A

Package Type

Blank = Compak (Surface Mount)

D = TO-252 (Surface Mount)

E = TO-92 (Isolated)

F = TO-202 (Non-islolated)

L = TO-220 (Isolated)

V = TO-251 (Non-islolated)

Special Options

V = 4000 V Isolation

(TO-220 Package Only)

Lead Form Dimensions TO-202 TO-220 TO-92

Gate Variations 3 = 3 mA (Q I, II, III, IV) 5 = 5 mA (Q I, II, III, IV)

6 = 5 mA (Q I, II, III)

6 = 10 mA (Q IV)

8 = 10 mA (Q I, II, III)

8 = 20 mA (Q IV)

Quadrac

 

 

Q

20

04

L

 

T

H

52

 

X

 

Device Type

 

 

 

 

 

 

 

 

 

 

Special Options

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V = 4000 V Isolation

Q = Quadrac

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(TO-220 Package Only)

 

 

 

 

 

 

 

 

 

 

 

Voltage Rating

 

 

 

 

 

 

 

 

Lead Form Dimensions

20 = 200 V

 

 

 

 

 

 

 

 

 

 

 

TO-220

40 = 400 V

 

 

 

 

 

 

 

 

 

 

 

Alternistor

60 = 600 V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current Rating

 

 

 

 

 

 

 

 

 

 

Gate Variation

 

 

 

 

 

 

 

 

T = Internal Diac Trigger

04

= 4 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

06

= 6 A

 

 

 

 

 

 

 

 

 

 

Package Type

08

= 8 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L = TO-220 (Isolated)

10

= 10 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

= 15 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Triac and Alternistor

 

 

Q

 

20

04

F

 

3

 

 

1

 

X

 

Device Type

 

 

 

 

 

 

 

 

 

 

Special Options

Q = Triac or Alternistor

 

 

 

 

 

 

 

 

 

V = 4000 V Isolation

 

 

 

 

 

 

 

 

 

 

 

 

(TO-220 Package Only)

Voltage Rating

 

 

 

 

 

 

 

 

 

 

 

20 = 200 V

 

 

 

 

 

 

 

 

Lead Form Dimensions

40 = 400 V

 

 

 

 

 

 

 

 

 

 

TO-202

60 = 600 V

 

 

 

 

 

 

 

 

 

 

TO-220

80 = 800 V

 

 

 

 

 

 

 

 

 

 

TO-92

K0 = 1000 V

 

 

 

 

 

 

 

 

 

 

TO-218X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TO-218

Current Rating

 

 

 

 

 

 

 

 

 

 

Gate Variation

X8 = 0.8 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DH3 and VH3 = 10mA (Q I, II, III)

01

= 1 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 = 10 mA (Q I, II, III)

04

= 4 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H3 = 20mA (Q I, II, III)

06

= 6 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 = 25 mA (Q I, II, III)

08

= 8 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H4 = 35 mA (Q I, II, III) *

10

= 10 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 = 50 mA (Q I, II, III)

12

= 12 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H5 = 50 mA (Q I, II, III) *

15

= 15 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 = 80 mA (Q I, II, III) *

25

= 25 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7 = 100 mA (Q I, II, III) *

30

= 30 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35

= 35 A

 

 

 

* NOTE:

 

 

 

 

 

40

= 40 A

 

 

 

Alternistor device; no Quadrant IV operation

Package Type

D = TO-252 (Surface Mount)

E = TO-92 (Isolated)

F = TO-202 (Non-isolated)

J = TO-218X (Isolated)

K = TO-218 (Isolated)

L = TO-220 (Isolated)

N = TO-263 (Surface Mount)

P = Fastpak (Isolated)

R = TO-220 (Non-isolated)

V = TO-251 (Non-isolated)

W = TO-218X (Non-isolated)

Sensitive SCR

S

20 06

F

S2 21 X

 

 

 

 

 

Device Type

S = Sensitive SCR

Voltage Rating 20 = 200 V 40 = 400 V 60 = 600 V

Current Rating X8 = 0.8 A

N = 1 A

06 = 6 A

08 = 8 A

10 = 10 A

Special Options

V = 4000 V Isolated

(TO-220 Package Only)

Lead Form Dimensions

TO-202

TO-220

Gate Variations

S1 = 50 µA

S2 = 200 µA

S3 = 500 µA

Package Type

Blank = Compak (Surface Mount)

D = TO-252 (Surface Mount)

F = TO-202 (Non-islolated)

L = TO-220 (Isolated)

V = TO-251 (Non-islolated)

EC 103 D

Device Type

TCR = TO-92 (Isolated)

EC = TO-92 (Isolated)

T = TO-202 (Non-isolated)

2N = JEDEC (Isolated)

Current Rating for TCR

22 = 1.5 A

Current Rating for EC 103 = 0.8 A

Current Rating for T

106 = 4 A (IGT = 200 µA)

107 = 4 A (IGT = 500 µA)

Current Rating for 2N 5xxx = 0.8 A

1 75

Lead Form Dimensions

TO-92

TO-202

Gate Current (for EC series only) None = 200 µA 1 = 12 µA 2 = 50 µA 3 = 500 µA

Voltage Rating for TCR -4 = 200 V -6 = 400 V -8 = 600 V

Voltage Rating for EC and T B = 200 V D = 400 V M = 600 V

Voltage Rating for 2N 5064 = 200 V 6565 = 400 V

http://www.teccor.com

P - 6

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog(972) 580-7777

Description of Part Numbers

SCR

 

 

S

 

20

08

F

12

 

X

 

 

Device Type

 

 

 

 

 

 

 

Special Options

 

 

 

 

 

 

 

 

 

S = Non-sensitive SCR

 

 

 

 

 

V = 4000 V Isolation

 

 

 

 

 

 

 

 

 

(TO-220 Package Only)

 

Voltage Rating

 

 

 

 

 

 

 

 

 

20 = 200 V

 

 

 

 

Lead Form Dimensions

 

40 = 400 V

 

 

 

 

 

 

 

 

 

 

 

 

TO-202

 

60 = 600 V

 

 

 

 

 

 

 

TO-220

 

80 = 800 V

 

 

 

 

 

 

 

TO-92

 

K0 = 1000 V

 

 

 

 

 

 

 

TO-218X

 

 

 

 

 

 

 

 

 

 

 

 

TO-218

 

Current Rating

 

 

 

 

 

 

 

 

 

01

= 1 A

 

 

 

 

 

 

 

Package Type

 

06

= 6 A

 

 

 

 

 

 

 

 

 

 

 

D = TO-252 (Surface Mount)

 

08

= 8 A

 

 

 

 

 

 

 

 

 

E = TO-92 (Isolated)

 

10

= 10 A

 

 

 

 

 

 

 

 

 

 

F = TO-202 (Non-isolated)

 

12

= 12 A

 

 

 

 

 

 

 

 

 

J = TO-218X (Isolated)

 

15

= 15 A

 

 

 

 

 

 

 

 

 

 

K = TO-218 (Isolated)

 

16

= 16 A

 

 

 

 

 

 

 

 

 

 

 

L = TO-220 (Isolated)

 

20

= 20 A

 

 

 

 

 

 

 

 

 

 

M = TO-218 (Non-isolated)

 

25

= 25 A

 

 

 

 

 

 

 

 

N = TO-263 (Surface Mount)

 

35

= 35 A

 

 

 

 

 

 

 

 

R = TO-220 (Non-isolated)

 

55

= 55 A

 

 

 

 

 

 

 

 

 

V = TO-251 (Non-isolated)

 

65

= 65 A

 

 

 

 

 

 

 

 

W = TO-218X (Non-isolated)

 

70

= 70 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rectifier

 

D

20

15

L

55

 

V

 

 

Device Type

 

 

 

 

 

 

Special Options

 

 

 

 

 

 

 

 

D = Rectifier

 

 

 

 

V = 4000 V Isolation

 

Voltage Rating

 

 

 

 

Lead Form Dimensions

 

20 = 200 V

 

 

 

 

 

 

 

TO-220

 

40 = 400 V

 

 

 

 

 

 

 

 

 

60 = 600 V

 

 

 

 

 

 

 

Package Type

 

80 = 800 V

 

 

 

 

 

 

 

 

 

 

 

 

L = TO-220 (Isolated)

 

K0 = 1000 V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current Rating

 

 

 

 

 

 

 

 

 

15 = 15 A

 

 

 

 

 

 

 

 

 

20 = 20 A

 

 

 

 

 

 

 

 

 

25 = 25 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Diac

HT

32

91

 

 

Device Type

 

Lead Form Dimensions

HT = Diac Trigger in DO-35

 

 

 

DO-35

ST = Diac Trigger in DO-214

 

 

 

 

 

 

 

Voltage Rating

 

 

32

= 27 V to 37 V

 

 

35

= 30 V to 40 V

 

 

40

= 35

V to 45 V

 

 

32A / 5761 = 28

V to 36 V

 

 

32B / 5761A = 30

V to 34 V

 

 

34B

= 32 V to 36 V

 

 

36A / 5762 = 32

V to 40 V

 

 

36B

= 34 V to 38 V

 

 

 

 

 

Sidac

 

 

K

 

105

0

 

E

70

Device Type

 

 

 

 

Lead Form Dimensions

K = Sidac

 

 

 

 

TO-202

 

 

 

 

 

 

 

 

TO-92

Voltage Rating

 

 

 

 

 

105

= 95 V to 113 V

 

 

 

 

Package Type

110

= 104 V to 118 V

 

 

 

E = TO-92 (Isolated)

120

= 110 V to 125 V

 

 

 

F = TO-202 (Non-islolated)

130

= 120 V to 138 V

 

 

 

G = DO-15X (Isolated)

140

= 130 V to 146 V

 

 

 

S = DO-214 (Surface Mount)

150

= 140 V to 170 V

 

 

 

 

200

= 190 V to 215 V

 

 

 

Current Rating

220

= 205 V to 230 V

 

 

 

 

 

 

0 = 1 A

240

= 220 V to 250 V

 

 

 

 

 

 

 

250

= 240 V to 280 V

 

 

 

 

300

= 270 V to 330 V

 

 

 

 

 

 

 

 

 

 

 

 

 

©2002 Teccor Electronics

P - 7

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Quality and Reliability

It is Teccor’s policy to ship quality products on time. We accomplish this through Total Quality Management based on the fundamentals of customer focus, continuous improvement, and people involvement.

In support of this commitment, Teccor applies the following principles:

Employees shall be respected, involved, informed, and qualified for their job with appropriate education, training, and experience.

Customer expectations shall be met or exceeded by consistently shipping products that meet the agreed specifications, quality levels, quantities, schedules, and test and reliability parameters.

Suppliers shall be selected by considering quality, service, delivery, and cost of ownership.

Design of products and processes will be driven by customer needs, reliability, and manufacturability.

It is the responsibility of management to incorporate these principles into policies and systems.

It is the responsibility of those in leadership roles to coach their people and to reinforce these principles.

It is the responsibility of each individual employee to follow the spirit of this statement to ensure that we meet the primary policy

— to ship quality products on time.

Quality Assurance

Incoming Material Quality

Teccor “Vendor Analysis” programs provide stringent requirements before components are delivered to Teccor. In addition, purchased materials are tested rigidly at incoming inspection for specification compliance prior to acceptance for use.

Process Controls

From silicon slice input through final testing, we use statistical methods to control all critical processes. Process audits and lot inspections are performed routinely at all stages of the manufacturing cycle.

Parametric Testing

All devices are 100% computer tested for specific electrical characteristics at critical processing points.

Final Inspection

Each completed manufacturing lot is sampled and tested for compliance with electrical and mechanical requirements.

Reliability Testing

Random samples are taken from various product families for ongoing reliability testing.

Finished Goods Inspection

Product assurance inspection is performed immediately prior to shipping.

Design Assurance

The design and production of Teccor devices is a demanding and challenging task. Disciplined skills coupled with advanced com- puter-aided design, production techniques, and test equipment are essential elements in Teccor's ability to meet your demands for the very highest levels of quality.

All products must first undergo rigid quality design reviews and pass extensive environmental life testing. Teccor uses Statistical Process Control (SPC) with associated control charts throughout to monitor the manufacturing processes.

Only those products which pass tests designed to assure Teccor's high quality and reliability standards, while economically satisfying customer requirements, are approved for shipment. All new products and materials must receive approval of QRA prior to being released to production.

The combination of reliability testing, process controls, and lot tracking assures the quality and reliability of Teccor's devices. Since even the best control systems cannot overcome measurement limitations, Teccor designs and manufactures its own computerized test equipment.

Teccor's Reliability Engineering Group conducts ongoing product reliability testing to further confirm the design and manufacturing parameters.

http://www.teccor.com

P - 8

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog(972) 580-7777

Quality and Reliability

Reliability Stress Tests

The following table contains brief descriptions of the reliability tests commonly used in evaluating Teccor product reliability on a periodic basis. These tests are applied across product lines depending on product availability and test equipment capacities. Other tests may be performed when appropriate.

 

 

 

 

 

 

 

Test Type

Typical Conditions

Test Description

Standards

 

 

High Temperature

TA = 100 °C to 150 °C, Bias @

Evaluation of the reliability of

MIL-STD-750, M-1040

 

 

AC Blocking

100%

product under bias conditions

 

 

 

 

Rated VDRM, t = 24 hrs to 1000 hrs

and elevated temperature

 

 

 

High Temperature

TA = 150 °C, t = 250 to 1000 hrs

Evaluation of the effects on

MIL-STD-750, M-1031

 

 

Storage Life

 

devices after long periods of

 

 

 

 

 

storage at high temperature

 

 

 

Temperature and Humidity

TA = 85 °C to 95 °C, rh = 85% to

Evaluation of the reliability of non-

EIA / JEDEC, JESD22-A101

 

 

Bias Life

95%

hermetic packaged devices in

 

 

 

 

Bias @ 80% Rated VDRM

humid environments

 

 

 

 

(320 VDC max)

 

 

 

 

 

t = 168 to 1008 hrs

 

 

 

 

Temperature Cycle

TA = -65 °C to 150 °C,

Evaluation of the device’s ability

MIL-STD-750, M-1051,

 

 

[Air to Air]

cycles = 10 to 500

to withstand the exposure to

EIA / JEDEC, JESD22-A104

 

 

 

 

extreme temperatures and the

 

 

 

 

 

forces of TCE during transitions

 

 

 

 

 

between temperatures

 

 

 

Thermal Shock

TA = 0 °C to 100 °C, ttxfr = 10 s,

Evaluation of the device’s ability

MIL-STD-750, M-1056

 

 

[Liquid to Liquid]

cycled = 10 to 20

to withstand the sudden changes

 

 

 

 

 

in temperature and exposure to

 

 

 

 

 

extreme temperatures

 

 

 

Autoclave

TA = 121 °C, rh = 100%, P = 15 psig,

Accelerated environmental test to

EIA / JEDEC, JESD22-A102

 

 

 

t = 24 hrs to 168 hrs

evaluate the moisture resistance

 

 

 

 

 

of plastic packages

 

 

 

Resistance to

TA = 260 °C, t = 10 s

Evaluation of the device’s ability

MIL-STD-750, M-2031

 

 

Solder Heat

 

to withstand the temperatures as

 

 

 

 

 

seen in wave soldering

 

 

 

 

 

operations

 

 

 

Solderability

Steam aging = 1 hr to 8 hrs,

Evaluation of the solderability of

MIL-STD-750, M-2026,

 

 

 

Tsolder = 245 °C, Flux = R

device terminals after an

ANSI-J-STD-002

 

 

 

 

extended period

 

 

 

 

 

 

 

 

Flammability Test

For the UL 94V0 flammability test, all expoxies used in Teccor encapsulated devices are recognized by Underwriters Laboratories

©2002 Teccor Electronics

P - 9

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Standard Terms and Conditions

Supplier shall not be bound by any term proposed by Buyer in the absence of written agreement to such term signed by an authorized officer of Supplier.

(1)PRICE:

(A)Supplier reserves the right to change product prices at any time but, whenever practicable, Supplier will give Buyer at least thirty (30) days written notice before the effective date of any price change. Unless Supplier has specifically agreed in writing, signed by an authorized officer of Supplier, that a quoted price shall not be subject to change for a certain time, all products shipped on or after the effective date of a price change may be billed at the new price level.

(B)Whenever Supplier agrees to a modification of Buyer's order (which modification must be in writing and signed by an authorized officer of Supplier), Supplier reserves the right to alter its price, whether or not such price was quoted as “firm.”

(C)Prices do not include federal, state or local taxes, now or hereafter enacted, applicable to the goods sold. Taxes will be added by Supplier to the sales prices whenever Supplier has legal obligation to collect them and will be paid by Buyer as invoiced unless Buyer provides Supplier with a proper tax exemption certificate.

(2)PRODUCTION: Supplier may, at its sole discretion and at any time, withdraw any catalog item from further production without notice or liability to Buyer.

(3)INTEREST:

(A)All late payments shall bear interest thirty (30) days after the due date stated on the invoice until paid at the lower of one and one-half percent per month or the maximum rate permitted by law. All interest becoming due shall, if not paid when due, be added to principal and bear interest from the due date. At Supplier's option, any payment shall be applied first to interest and then to principal.

(B)It is the intention of the parties to comply with the laws of the jurisdiction governing any agreement between the parties relating to interest. If any construction of the agreement between the parties indicates a different right given to Supplier to demand or receive any sum greater than that permissible by law as interest, such as a mistake in calculation or wording, this paragraph shall override. In any contingency which will cause the interest paid or agreed to be paid to exceed the maximum rate permitted by law, such excess will be applied to the reduction of any principal amount due, or if there is no principal amount due, shall be refunded.

(4)TITLE AND DELIVERY: Title to goods ordered by Buyer and risk of loss or damage in transit or thereafter shall pass to Buyer upon Supplier's delivery of the goods at Supplier's plant or to a common carrier for shipment to Buyer.

(5)CONTINGENCIES: Supplier shall not be responsible for any failure to perform due to causes reasonably beyond its control. These causes shall include, but not be restricted to, fire, storm, flood, earthquake, explosion, accident, acts of public enemy, war rebellion, insurrection, sabotage, epidemic, quarantine restrictions, labor disputes, labor shortages, labor slow downs and sit downs, transportation embargoes, failure or delays in transportation, inability to secure raw materials or machinery for the manufacture of its devices, acts of God, acts of the Federal Government or any agency thereof, acts of any state or local government or agency thereof, and judicial action. Similar causes shall excuse Buyer for failure to take goods ordered by Buyer, from the time Supplier receives written notice from Buyer and for as long as the disabling cause continues, other than for goods already in transit or specially fabricated and not readily saleable to other buyers.

Supplier assumes no responsibility for any tools, dies, and other equipment furnished Supplier by Buyer.

(6)LIMITED WARRANTY AND EXCLUSIVE REMEDY: Supplier warrants all catalog products to be free from defects in materials and workmanship under normal and proper use and application for a period of twelve (12) months from the date code on the product in question (or if none, from the date of delivery to Buyer.) With respect to products assembled, prepared, or manufactured to Buyer's specifications, Supplier warrants only that such products will meet Buyer's specifications upon delivery. As the party responsible for the specifications, Buyer shall be responsible for testing and inspecting the products for adherence to specifications, and Supplier shall have no liability in the absence of such testing and inspection or if the product passes such testing or inspection. THE ABOVE WARRANTY IS THE ONLY WARRANTY EXTENDED BY SUPPLIER, AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES AND CONDITIONS, EXPRESSED OR IMPLIED (EXCEPT AS PROVIDED HEREIN AS TO TITLE), ON ANY GOODS OR SERVICES SOLD OR RENDERED BY SUPPLIER, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY WILL NOT CREATE WARRANTY COVERAGE FOR ANY ITEM INTO WHICH ANY PRODUCT SOLD BY SUPPLIER MAY HAVE BEEN INCORPORATED OR ADDED.

http://www.teccor.com

P - 10

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog(972) 580-7777

Standard Terms and Conditions

SUPPLIER'S ENTIRE LIABILITY AND BUYER'S EXCLUSIVE REMEDY UNDER THIS WARRANTY SHALL BE, AT SUPPLIER'S OPTION, EITHER THE REPLACEMENT OF, REPAIR OF, OR ISSUANCE OF CREDIT TO BUYER'S ACCOUNT WITH SUPPLIER FOR ANY PRODUCTS WHICH ARE PROPERLY RETURNED BY BUYER DURING THE WARRANTY PERIOD. All returns must comply with the following conditions:

(A)Supplier is to be promptly notified in writing upon discovery of defects by Buyer.

(B)Buyer must obtain a Return Material Authorization (RMA) number from the Supplier prior to returning product.

(C)The defective product is returned to Supplier, transportation charges prepaid by Buyer.

(D)Supplier's examination of such product discloses, to its satisfaction, that such defects have not been caused by misuse, neglect, improper installation, repair, alteration, or accident.

(E)The product is returned in the form it was delivered with any necessary disassembly carried out by Buyer at Buyer's expense.

IN NO EVENT SHALL SUPPLIER, OR ANYONE ELSE ASSOCIATED IN THE CREATION OF ANY OF SUPPLIER'S PRODUCTS OR SERVICES, BE LIABLE TO BUYER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE INCLUDING LOSS OF PROFITS, LOSS OF USE, BUSINESS INTERUPTION, AND THE LIKE. BUYER ACKNOWLEDGES THAT THE ABOVE WARRANTIES AND LIMITATIONS THEREON ARE APPROPRIATE AND REASONABLE IN EFFECTUATING SUPPLIER'S AND BUYER'S MUTUAL INTENTION TO CONDUCT AN EFFICIENT TRANSACTION AT PRICES MORE ADVANTAGEOUS TO BUYER THAN WOULD BE AVAILABLE IN THE PRESENCE OF OTHER WARRANTIES AND ASSURANCES.

(7)PATENTS: Buyer shall notify Supplier in writing of any claim that any product or any part of use thereof furnished under this agreement constitutes an infringement of any U.S. patent, copyright, trade secret, or other proprietary rights of a third party. Notice shall be given within a reasonable period of time which should in most cases be within ten (10) days of receipt by Buyer of any letter, summons, or complaint pertaining to such a claim. At its option, Supplier may defend at its expense any action brought against Buyer to the extent that it is based on such a claim. Should Supplier choose to defend any such claim, Supplier may fully participate in the defense, settlement, or appeal of any action based on such claim.

Should any product become, or in Supplier's opinion be likely to become, the subject of an action based on any such claim, Supplier may, at its option, as the Buyer's exclusive remedy, either procure for the Buyer the right to continue using the product, replace the product or modify the product to make it noninfringing. IN NO EVENT SHALL SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES BASED ON ANY CLAIM OF INFRINGEMENT.

Supplier shall have no liability for any claim based on modifications of a product made by any person or entity other than Supplier, or based on use of a product in conjunction with any other item, unless expressly approved by Supplier. Supplier does not warrant goods against claims of infringement which are assembled, prepared, or manufactured to Buyer's specifications.

(8)NON-WAIVER OF DEFAULT: Each shipment made under any order shall be treated as a separate transaction, but in the event of any default by Buyer, Supplier may decline to make further shipments without in any way affecting its rights under such order. If, despite any default by Buyer, Supplier elects to continue to make shipments, its action shall not constitute a waiver of that or any default by Buyer or in any way affect Supplier's legal remedies for any such default. At any time, Supplier's failure to exercise any right to remedy available to it shall not constitute a waiver of that right or remedy.

(9)TERMINATION: If the products to be furnished under this order are to be used in the performance of a Government contract or subcontract, and the Government terminates such contract in whole or part, this order may be canceled to the extent it was to be used in the canceled portion of said Government contract and the liability of Buyer for termination allowances shall be determined by the then applicable regulations of the Government regarding termination of contracts. Supplier may cancel any unfilled orders unless Buyer shall, upon written notice, immediately pay for all goods delivered or shall pay in advance for all goods ordered but not delivered, or both, at Supplier's option.

(10)LAW: The validity, performance and construction of these terms and conditions and any sale made hereunder shall be governed by the laws of the state of Texas.

(11)ASSIGNS: This agreement shall not be assignable by either Supplier or Buyer. However, should either Supplier or Buyer be sold or transferred in its entirety and as an ongoing business, or should Supplier or Buyer sell or transfer in its entirety and as an ongoing concern, any division, department, or subsidiary responsible in whole or in part for the performance of this Agreement, this Agreement shall be binding upon and inure to the benefit of those successors and assigns of Supplier, Buyer, or such division, department, or subsidiary.

(12)MODIFICATION OF STANDARD TERMS AND CONDITIONS: No attempted or suggested modification of or addition to any of the provisions upon the face or reverse of this form, whether contained or arising in correspondence and/or documents passing between Supplier and Buyer, in any course of dealing between Supplier or Buyer, or in any customary usage prevalent among businesses comparable to those of Supplier and/or Buyer, shall be binding upon Supplier unless made and agreed to in writing and signed by an officer of Supplier.

(13)QUANTITIES: Any variation in quantities of electronic components, or other goods shipped over or under the quantities ordered (not to exceed 5%) shall constitute compliance with Buyer's order and the unit price will continue to apply.

©2002 Teccor Electronics

P - 11

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Notes

Data Sheets

V-I Characteristics of Thyristor Devices - - - - - - - - - - - - - - - - - - - - - E0-2

Electrical Parameter Terminology - - - - - - - - - - - - - - - - - - - - - - - - - E0-3

Sensitive Triacs- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E1

Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E2

QUADRACs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E3

Alternistor Triacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E4

Sensitive SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E5

SCRs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E6

Rectifiers - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E7

Diacs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E8

SIDAC - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E9

©2002 Teccor Electronics

http://www.teccor.com

Thyristor Product Catalog

+1 972-580-7777

V-I Characteristics of Thyristor Devices

+I

Voltage Drop (VT) at

Specified Current (iT)

Latching Current (IL)

Off-state Leakage

Current – (IDRM) at

Specified VDRM

Minimum Holding

Current (IH)

-V

+V

Specified Minimum

Off-state

Blocking

Voltage (VDRM)

Breakover

Voltage

-I

V-I Characteristics of Triac Device

 

 

+I

 

 

Voltage Drop (VT) at

 

 

 

Specified Current (iT)

 

Latching Current (IL)

 

 

 

 

 

 

Off - State Leakage

Reverse Leakage

 

Current - (IDRM) at

Current - (IRRM) at

 

Specified VDRM

Specified VRRM

Minimum Holding

 

 

 

Current (IH)

 

 

-V

 

 

+V

 

Specified Minimum

 

Specified Minimum

 

 

Off - State

 

Reverse Blocking

 

 

 

Blocking

 

Voltage (VRRM)

 

 

 

Voltage (VDRM)

 

 

 

 

Reverse

 

Forward

 

Breakdown

 

Breakover

 

Voltage

-I

Voltage

 

 

 

V-I Characteristics of SCR Device

 

+I

 

 

 

IT

 

 

 

IH

R

S

 

 

 

 

IS

 

 

 

IBO

 

 

-V

IDRM

 

+V

 

 

 

VT

VBO

 

VS

 

RS

(VBO - VS)

VDRM

 

=

 

 

(IS - IBO)

 

 

 

-I

 

 

V-I Characteristics of Sidac Device with Negative Resistance

 

+I

10 mA

V

Breakover

 

Current

 

IBO

 

-V

+V

 

Breakover

 

Voltage

 

VBO

 

-I

V-I Characteristics of Bilateral Trigger Diac

http://www.teccor.com

E0 - 2

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog

RθJA
IT(RMS)

Electrical Parameter Terminology

Thyristor

di/dt (Critical Rate-of-rise of On-state Current) – Maximum value of the rate-of-rise of on-state current which a thyristor can withstand without deleterious effect

dv/dt (Critical Rate-of-rise of Off-state Voltage or Static dv/dt) – Minimum value of the rate-of-rise of principal voltage which will cause switching from the off state to the on state

dv/dt(c) Critical Rate-of-rise of Commutation Voltage of a Triac (Commutating dv/dt) – Minimum value of the rate-of-rise of principal voltage which will cause switching from the off state to the on state immediately following on-state current conduction in the opposite quadrant

I2t (RMS Surge (Non-repetitive) On-state Fusing Current) –

Measure of let-through energy in terms of current and time for fusing purposes

IBO (Breakover Current) – Principal current at the breakover point

IDRM (Repetitive Peak Off-state Current) – Maximum leakage current that may occur under the conditions of VDRM

IGT (Gate Trigger Current) – Minimum gate current required to switch a thyristor from the off state to the on state

IH (Holding Current) – Minimum principal current required to maintain the thyristor in the on state

IPP (Peak Pulse Current) – Peak pulse current at a short time duration and specified waveshape

IRRM (Repetitive Peak Reverse Current) – Maximum leakage current that may occur under the conditions of VRRM

IS (Switching Current) – Current at VS when a sidac switches from the clamping state to on state

(On-state Current) – Anode cathode principal current that may be allowed under stated conditions, usually the fullcycle RMS current

ITSM (Surge (Non-repetitive) On-state Current) – Peak single cycle AC current pulse allowed

PG(AV) (Average Gate Power Dissipation) – Value of gate power which may be dissipated between the gate and main ter-

minal 1 (or cathode) average over a full cycle

PGM (Peak Gate Power Dissipation) – Maximum power which may be dissipated between the gate and main terminal 1 (or cathode) for a specified time duration

(Thermal Resistance, Junction-to-ambient)Temperature difference between the thyristor junction and ambient divided by the power dissipation causing the temperature difference under conditions of thermal equilibrium

Note: Ambient is defined as the point where temperature does not change as a result of the dissipation.

RθJC (Thermal Resistance, Junction-to-case)Temperature difference between the thyristor junction and the thyristor case divided by the power dissipation causing the temperature difference under conditions of thermal equilibrium

tgt (Gate-controlled Turn-on Time) – Time interval between the 10% rise of the gate pulse and the 90% rise of the principal current pulse during switching of a thyristor from the off state to the on state

tq (Circuit-commutated Turn-off Time) – Time interval between the instant when the principal current has decreased to zero after external switching of the principal voltage circuit and the instant when the SCR is capable of supporting a specified principal voltage without turning on

VBO (Breakover Voltage) – Principal voltage at the breakover point

VDRM (Repetitive Peak Off-state Voltage) – Maximum allowable instantaneous value of repetitive off-state voltage that may be applied across a bidirectional thyristor (forward or reverse direction) or SCR (forward direction only)

VGT (Gate Trigger Voltage) – Minimum gate voltage required to produce the gate trigger current

VRRM (Repetitive Peak Reverse Voltage) – Maximum allowable instantaneous value of a repetitive reverse voltage that may be applied across an SCR without causing reverse current avalanche

VS (Switching Voltage) – Voltage point after VBO when a sidac switches from a clamping state to on state

VT (On-state Voltage) – Principal voltage when the thyristor is in the on state

Diode Rectifiers

IF(AV) (Average Forward Current) – Average forward conduction current

IFM (Maximum (Peak) Reverse Current) – Maximum reverse leakage current that may occur at rated VRRM

IF(RMS) (RMS Forward Current) – RMS forward conduction current

IFSM (Maximum (Peak) Forward (Non-repetitive) Surge

Current) – Maximum (peak) forward single cycle AC surge current allowed for specified duration

VFM (Maximum (Peak) Forward Voltage Drop) – Maximum (peak) forward voltage drop from the anode to cathode at stated conditions

VR (Reverse Blocking Voltage) – Maximum allowable DC reverse blocking voltage that may be applied to the rectifier

VRRM (Maximum (Peak) Repetitive Reverse Voltage) – Maximum peak allowable value of a repetitive reverse voltage that may be applied to the rectifier

©2002 Teccor Electronics

E0 - 3

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Notes

 

s*

 

 

 

Package

IZED

 

E1

 

 

 

U

File

 

 

SelectedRECOGN#E71639

 

 

.

 

 

 

 

.L

 

 

 

 

 

 

 

TO-92

 

 

 

 

*TO-220

 

 

 

 

Isolated

 

 

 

 

3-lead

 

 

 

 

Compak

 

 

 

 

TO-252

 

 

TO-202

D-Pak

 

 

 

 

 

 

 

MT2

MT1

 

 

 

TO-251

 

 

 

 

V-Pak

 

 

 

 

 

G

Sensitive Triacs

(0.8 A to 8 A)

General Description

Teccor's line of sensitive gate triacs includes devices with current capabilities through 8 A. Voltage ranges are available from 200 V to 600 V. This line features devices with guaranteed gate control in Quadrants II and IV as well as control in the commonly used Quadrants I and III. Four-quadrant control devices require sensitive gate triacs. They can be controlled by digital circuitry where positive-only or negative-only pulses must control AC current in both directions through the device. Note that triacs with low IGT values in Quadrants II and IV will have lower dv/dt characteristics.

The sensitive gate triac is a bidirectional AC switch and is gate controlled for either polarity of main terminal voltage. It is used primarily for AC switching and phase control applications such as motor speed controls, temperature modulation controls, and lighting controls.

The epoxy TO-92 and TO-220 configurations feature Teccor's electrically-isolated construction where the case or mounting tab is internally isolated from the semiconductor chip and lead attachments. Non-isolated epoxy TO-202 packages are available as well as TO-251 and surface mount TO-252 (D-Pak). Tape- and-reel capability and tube packing also are available. See “Packing Options” section of this catalog.

All Teccor triacs have glass-passivated junctions. This glassing process prevents migration of contaminants and ensures longterm device reliability with parameter stability.

Variations of devices covered in this data sheet are available for custom design applications. Consult factory for more information.

Features

Electrically-isolated packages

Glass-passivated junctions ensure long device reliability and parameter stability

Voltage capability — up to 600 V

Surge capability — up to 80 A

Four-quadrant gating guaranteed

Compak Sensitive Gate Triac

Surface mount package — 0.8 A and 1 A series

New small profile three-leaded Compak package

Packaged in embossed carrier tape with 2,500 devices per reel

Can replace SOT-223

©2002 Teccor Electronics

E1 - 1

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Sensitive Triacs

Data Sheets

 

 

Part No.

IT(RMS)

 

Isolated

 

 

 

Non-isolated

 

VDRM

 

 

IGT

 

 

IDRM

 

 

(11)

 

 

 

 

 

 

 

MT2

(1)

 

(3) (6) (9)

 

 

(1) (14)

 

 

 

 

 

 

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MT1

 

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MT1

MT2

 

MT2

 

MT1

MT1

G

G

 

 

 

 

 

 

 

 

 

 

 

G

 

MT1

G

 

MT2

MT1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MT2

 

 

mAmps

 

 

mAmps

 

 

 

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TO-252

 

 

TO-251

 

 

 

 

 

 

TO-92

Compak

TO-220

 

TO-202

Volts

 

 

 

 

TC =

TC =

 

D-Pak

V-Pak

QI

QII

QIII

QIV

25

°

110

°

C

 

 

 

 

 

 

 

 

 

 

C

 

MAX

 

See “Package Dimensions” section for variations. (12)

 

 

MIN

 

MAX

 

 

MAX

 

 

 

L2X8E3

L2X3

 

 

 

 

200

3

3

3

3

0.01

0.1

 

L4X8E3

L4X3

 

 

 

 

400

3

3

3

3

0.01

0.1

 

L6X8E3

L6X3

 

 

 

 

600

3

3

3

3

0.01

0.1

 

L2X8E5

L2X5

 

 

 

 

200

5

5

5

5

0.01

0.1

0.8 A

L4X8E5

L4X5

 

 

 

 

400

5

5

5

5

0.01

0.1

L6X8E5

L6X5

 

 

 

 

600

5

5

5

5

0.01

0.1

 

L2X8E6

 

 

 

 

 

200

5

5

5

10

0.01

0.1

 

L4X8E6

 

 

 

 

 

400

5

5

5

10

0.01

0.1

 

L6X8E6

 

 

 

 

 

600

5

5

5

10

0.01

0.1

 

L2X8E8

 

 

 

 

 

200

10

10

10

20

0.01

0.1

 

L4X8E8

 

 

 

 

 

400

10

10

10

20

0.01

0.1

 

L6X8E8

 

 

 

 

 

600

10

10

10

20

0.01

0.1

 

L201E3

L2N3

 

 

 

 

200

3

3

3

3

0.01

0.1

 

L401E3

L4N3

 

 

 

 

400

3

3

3

3

0.01

0.1

 

L601E3

L6N3

 

 

 

 

600

3

3

3

3

0.01

0.1

 

L201E5

L2N5

 

 

 

 

200

5

5

5

5

0.01

0.1

1 A

L401E5

L4N5

 

 

 

 

400

5

5

5

5

0.01

0.1

L601E5

L6N5

 

 

 

 

600

5

5

5

5

0.01

0.1

 

L201E6

 

 

 

 

 

200

5

5

5

10

0.01

0.1

 

L401E6

 

 

 

 

 

400

5

5

5

10

0.01

0.1

 

L601E6

 

 

 

 

 

600

5

5

5

10

0.01

0.1

 

L201E8

 

 

 

 

 

200

10

10

10

20

0.01

0.1

 

L401E8

 

 

 

 

 

400

10

10

10

20

0.01

0.1

 

L601E8

 

 

 

 

 

600

10

10

10

20

0.01

0.1

 

 

 

L2004L3

L2004D3

L2004F31

L2004V3

200

3

3

3

3

0.01

0.2

 

 

 

L4004L3

L4004D3

L4004F31

L4004V3

400

3

3

3

3

0.01

0.2

 

 

 

L6004L3

L6004D3

L6004F31

L6004V3

600

3

3

3

3

0.01

0.2

 

 

 

L2004L5

L2004D5

L2004F51

L2004V5

200

5

5

5

5

0.01

0.2

4 A

 

 

L4004L5

L4004D5

L4004F51

L4004V5

400

5

5

5

5

0.01

0.2

 

 

L6004L5

L6004D5

L6004F51

L6004V5

600

5

5

5

5

0.01

0.2

 

 

 

L2004L6

L2004D6

L2004F61

L2004V6

200

5

5

5

10

0.01

0.2

 

 

 

L4004L6

L4004D6

L4004F61

L4004V6

400

5

5

5

10

0.01

0.2

 

 

 

L6004L6

L6004D6

L6004F61

L6004V6

600

5

5

5

10

0.01

0.2

 

 

 

L2004L8

L2004D8

L2004F81

L2004V8

200

10

10

10

20

0.01

0.2

 

 

 

L4004L8

L4004D8

L4004F81

L4004V8

400

10

10

10

20

0.01

0.2

 

 

 

L6004L8

L6004D8

L6004F81

L6004V8

600

10

10

10

20

0.01

0.2

See “General Notes” on page E1 - 4 and “Electrical Specification Notes” on page E1 - 5.

http://www.teccor.com

E1 - 2

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog

Data Sheets

 

 

 

 

 

 

 

 

 

Sensitive Triacs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VTM

VGT

IH

IGTM

PGM

PG(AV)

ITSM

dv/dt(c)

dv/dt

tgt

I2t

di/dt

 

 

(1) (4)

(2) (5) (15)

(1) (7)

(13)

(13)

 

(8) (10)

(1) (10)

(1)

(9)

 

 

 

 

Volts

Volts

 

 

 

 

Amps

 

Volts/ Sec

 

 

 

 

 

TC =

TC =

mAmps

Amps

Watts

Watts

 

Volts/µSec

TC =

µSec

Amps2Sec

Amps/µSec

 

 

°

°

60/50 Hz

100 °C

 

 

25 C

25 C

 

 

 

 

 

 

 

 

 

 

MAX

MAX

MAX

 

 

 

 

TYP

TYP

TYP

 

 

 

 

1.6

2

5

1

10

0.2

10/8.3

0.5

20

2.8

0.41

20

 

 

1.6

2

5

1

10

0.2

10/8.3

0.5

15

2.8

0.41

20

 

 

1.6

2

5

1

10

0.2

10/8.3

0.5

10

2.8

0.41

20

 

 

1.6

2

10

1

10

0.2

10/8.3

1

20

3

0.41

20

 

 

1.6

2

10

1

10

0.2

10/8.3

1

15

3

0.41

20

 

 

1.6

2

10

1

10

0.2

10/8.3

1

10

3

0.41

20

 

 

1.6

2

10

1

10

0.2

10/8.3

1

30

3

0.41

20

 

 

1.6

2

10

1

10

0.2

10/8.3

1

25

3

0.41

20

 

 

1.6

2

10

1

10

0.2

10/8.3

1

20

3

0.41

20

 

 

1.6

2

15

1

10

0.2

10/8.3

2

35

3.2

0.41

20

 

 

1.6

2

15

1

10

0.2

10/8.3

2

30

3.2

0.41

20

 

 

1.6

2

15

1

10

0.2

10/8.3

2

25

3.2

0.41

20

 

 

1.6

2

5

1

10

0.2

20/16.7

0.5

20

2.8

1.6

20

 

 

1.6

2

5

1

10

0.2

20/16.7

0.5

20

2.8

1.6

20

 

 

1.6

2

5

1

10

0.2

20/16.7

0.5

10

2.8

1.6

20

 

 

1.6

2

10

1

10

0.2

20/16.7

1

20

3

1.6

20

 

 

1.6

2

10

1

10

0.2

20/16.7

1

20

3

1.6

20

 

 

1.6

2

10

1

10

0.2

20/16.7

1

10

3

1.6

20

 

 

1.6

2

10

1

10

0.2

20/16.7

1

30

3

1.6

20

 

 

1.6

2

10

1

10

0.2

20/16.7

1

30

3

1.6

20

 

 

1.6

2

10

1

10

0.2

20/16.7

1

20

3

1.6

20

 

 

1.6

2

15

1

10

0.2

20/16.7

1

35

3.2

1.6

20

 

 

1.6

2

15

1

10

0.2

20/16.7

1

35

3.2

1.6

20

 

 

1.6

2

15

1

10

0.2

20/16.7

1

25

3.2

1.6

20

 

 

1.6

2

5

1.2

15

0.3

40/33

0.5

25

2.8

6.6

50

 

 

1.6

2

5

1.2

15

0.3

40/33

0.5

25

2.8

6.6

50

 

 

1.6

2

5

1.2

15

0.3

40/33

0.5

15

2.8

6.6

50

 

 

1.6

2

10

1.2

15

0.3

40/33

1

25

3

6.6

50

 

 

1.6

2

10

1.2

15

0.3

40/33

1

25

3

6.6

50

 

 

1.6

2

10

1.2

15

0.3

40/33

1

15

3

6.6

50

 

 

1.6

2

10

1.2

15

0.3

40/33

1

30

3

6.6

50

 

 

1.6

2

10

1.2

15

0.3

40/33

1

30

3

6.6

50

 

 

1.6

2

10

1.2

15

0.3

40/33

1

20

3

6.6

50

 

 

1.6

2

15

1.2

15

0.3

40/33

2

35

3.2

6.6

50

 

 

1.6

2

15

1.2

15

0.3

40/33

2

35

3.2

6.6

50

 

 

1.6

2

15

1.2

15

0.3

40/33

2

25

3.2

6.6

50

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

See “General Notes” on page E1 - 4 and “Electrical Specification Notes” on page E1 - 5.

©2002 Teccor Electronics

E1 - 3

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Sensitive Triacs

Data Sheets

 

 

IT(RMS)

 

 

Part No.

 

 

VDRM

 

 

IGT

 

IDRM

Isolated

 

 

Non-isolated

 

 

 

(11)

 

 

 

 

MT2

(1)

 

(3) (6)

 

(1) (14)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MT2

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

MT1

 

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MT1

G

 

 

MT1

 

 

 

 

 

 

 

 

 

 

MT2

 

 

 

 

 

 

 

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TO-252

 

TO-251

 

 

mAmps

 

mAmps

 

TO-220

D-Pak

 

V-Pak

Volts

QI

QII

QIII

QIV

TC = 25 °C

TC = 110 °C

MAX

 

See “Package Dimensions” section for variations. (12)

MIN

 

MAX

 

MAX

 

L2006L5

L2006D5

 

L2006V5

200

5

5

5

5

0.02

0.5

 

L4006L5

L4006D5

 

L4006V5

400

5

5

5

5

0.02

0.5

6 A

L6006L5

L6006D5

 

L6006V5

600

5

5

5

5

0.02

0.5

L2006L6

L2006D6

 

L2006V6

200

5

5

5

10

0.02

0.5

 

 

 

L4006L6

L4006D6

 

L4006V6

400

5

5

5

10

0.02

0.5

 

L6006L6

L6006D6

 

L6006V6

600

5

5

5

10

0.02

0.5

 

L2006L8

L2006D8

 

L2006V8

200

10

10

10

20

0.02

0.5

 

L4006L8

L4006D8

 

L4006V8

400

10

10

10

20

0.02

0.5

 

L6006L8

L6006D8

 

L6006V8

600

10

10

10

20

0.02

0.5

 

L2008L6

L2008D6

 

L2008V6

200

5

5

5

10

0.02

0.5

8 A

L4008L6

L4008D6

 

L4008V6

400

5

5

5

10

0.02

0.5

L6008L6

L6008D6

 

L6008V6

600

5

5

5

10

0.02

0.5

 

 

 

L2008L8

L2008D8

 

L2008V8

200

10

10

10

20

0.02

0.5

 

L4008L8

L4008D8

 

L4008V8

400

10

10

10

20

0.02

0.5

 

L6008L8

L6008D8

 

L6008V8

600

10

10

10

20

0.02

0.5

Specified Test Conditions

di/dt — Maximum rate-of-change of on-state current; IGT = 50 mA with 0.1 µs rise time

dv/dt — Critical rate-of-rise of off-state voltage at rated VDRM gate open

dv/dt(c) — Critical rate-of-rise of commutation voltage at rated VDRM

and IT(RMS) commutating di/dt = 0.54 rated IT(RMS)/ms; gate unenergized

I2t — RMS surge (non-repetitive) on-state current for period of 8.3 ms for fusing

IDRM — Peak off-state current, gate open; VDRM = max rated value

IGT — DC gate trigger current in specific operating quadrants; VD = 12 V dc; RL = 60 Ω

IGTM — Peak gate trigger current

IH — Holding current gate open; initial on-state current = 100 mA dc IT(RMS) — RMS on-state current conduction angle of 360°

ITSM — Peak one-cycle surge

PG(AV) — Average gate power dissipation PGM — Peak gate power dissipation; IGT IGTM

tgt — Gate controlled turn-on time; IGT = 50 mA with 0.1 µs rise time VDRM — Repetitive peak off-state/blocking voltage

VGT — DC gate trigger voltage; VD = 12 V dc; RL = 60 Ω VTM — Peak on-state voltage at max rated RMS current

General Notes

All measurements are made with 60 Hz resistive load and at an ambient temperature of +25 °C unless otherwise specified.

Operating temperature range (TJ) is -65 °C to +110 °C for TO-92 devices and -40 °C to 110 °C for all other devices.

Storage temperature range (TS) is -65 °C to +150 °C for TO-92 devices, -40 °C to +150 °C for TO-202 devices, and -40 °C to +125 °C for TO-220 devices.

Lead solder temperature is a maximum of 230 °C for 10 seconds maximum at a minimum of 1/16” (1.59 mm) from case.

The case or lead temperature (TC or TL) is measured as shown on dimensional outline drawings. See “Package Dimensions” section of this catalog.

http://www.teccor.com

E1 - 4

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog

Data Sheets

 

 

 

 

 

 

 

 

 

 

Sensitive Triacs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VTM

VGT

IH

IGTM

PGM

PG(AV)

ITSM

dv/dt(c)

dv/dt

tgt

I2t

 

di/dt

 

 

(1) (4)

(2) (5) (15)

(1) (7)

(13)

(13)

 

(8) (10)

(1) (10)

(1)

(9)

 

 

 

 

 

Volts

Volts

mAmps

Amps

Watts

Watts

Amps

Volts/µSec

Volts/µSec

µSec

Amps2Sec

 

Amps/µSec

 

 

TC = 25 °C

TC = 25 °C

60/50 Hz

TC = 100 °C

 

 

 

MAX

MAX

MAX

 

 

 

 

TYP

TYP

TYP

 

 

 

 

 

1.6

2

10

1.6

18

0.4

60/50

1

40

3

15

 

70

 

 

1.6

2

10

1.6

18

0.4

60/50

1

30

3

15

 

70

 

 

1.6

2

10

1.6

18

0.4

60/50

1

20

3

15

 

70

 

 

1.6

2

10

1.6

18

0.4

60/50

2

40

3

15

 

70

 

 

1.6

2

10

1.6

18

0.4

60/50

2

30

3

15

 

70

 

 

1.6

2

10

1.6

18

0.4

60/50

2

20

3

15

 

70

 

 

1.6

2

20

1.6

18

0.4

60/50

2

45

3.2

15

 

70

 

 

1.6

2

20

1.6

18

0.4

60/50

2

40

3.2

15

 

70

 

 

1.6

2

20

1.6

18

0.4

60/50

2

30

3.2

15

 

70

 

 

1.6

2

10

1.6

18

0.4

80/65

2

40

3

26.5

 

70

 

 

1.6

2

10

1.6

18

0.4

80/65

2

30

3

26.5

 

70

 

 

1.6

2

10

1.6

18

0.4

80/65

2

20

3

26.5

 

70

 

 

1.6

2

20

1.6

18

0.4

80/65

2

45

3.2

26.5

 

70

 

 

1.6

2

20

1.6

18

0.4

80/65

2

40

3.2

26.5

 

70

 

 

1.6

2

20

1.6

18

0.4

80/65

2

30

3.2

26.5

 

70

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Electrical Specification Notes

(1)For either polarity of MT2 with reference to MT1 terminal

(2)For either polarity of gate voltage VGT with reference to MT1 terminal

(3)See Gate Characteristics and Definition of Quadrants.

(4)See Figure E1.4 for iT versus vT.

(5)See Figure E1.6 for VGT versus TC.

(6)See Figure E1.7 for IGT versus TC.

(7)See Figure E1.5 for IH versus TC.

(8)See Figure E1.9 for surge rating and specific duration.

(9)See Figure E1.8 for tgt versus IGT.

(10)See Figure E1.2 and Figure E1.3 for maximum allowable case temperature at maximum rated current.

(11)See Figure E1.1, Figure E1.2, and Figure E1.3 for TA or TC versus

IT(RMS).

(12)See package outlines for lead form configurations. When ordering special lead forming, add type number as suffix to part number.

(13)Pulse width 10 µs

(14)TC or TL = TJ for test conditions in off state

(15)Minimum non-trigger VGT at 110 °C is 0.2 V.

Gate Characteristics

Teccor triacs may be turned on between gate and MT1 terminals in the following ways:

In-phase signals (with standard AC line) using Quadrants I and III

Application of unipolar pulses (gate always positive or negative), using Quadrants II and III with negative gate pulses and Quadrants I and IV with positive gate pulses

When maximum surge capability is required, pulses should be a minimum of one magnitude above IGT rating with a steep rising waveform (1 µs rise time).

 

 

ALL POLARITIES ARE REFERENCED TO MT1

 

 

 

 

MT2 POSITIVE

 

 

 

 

MT2

(Positive Half Cycle)

 

 

 

 

 

+

 

MT2

 

(-) I G T

 

 

(+) I G T

 

 

GATE

 

 

 

GATE

 

 

 

MT1

 

 

 

MT1

 

-

REF

 

QII

QI

 

REF

I G T

 

 

 

+ I G T

 

 

QIII

QIV

 

 

 

MT2

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(-) I

G T

 

 

(+) I

G T

 

 

GATE

 

 

GATE

 

 

 

MT1

 

-

 

MT1

 

 

REF

 

 

 

REF

 

 

 

MT2 NEGATIVE

(Negative Half Cycle)

Definition of Quadrants

©2002 Teccor Electronics

E1 - 5

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Sensitive Triacs

Data Sheets

 

 

Electrical Isolation

Teccor’s isolated triac packages withstand a minimum high potential test of 2500 V ac rms from leads to mounting tab over the device's operating temperature range. The following isolation table shows standard isolation ratings.

 

Electrical Isolation

 

 

 

 

 

 

from Leads to Mounting Tab

 

 

 

 

 

V AC RMS

TO-220 *

 

 

 

 

 

2500

 

Standard

 

 

 

 

 

*UL Recognized File #E71639

 

 

 

 

 

 

 

 

Thermal Resistance (Steady State) Junction to Mounting Tab

 

 

 

 

 

and Junction to Ambient

 

 

 

 

 

 

RθJC [RθJA] °C/W (TYP)

 

 

 

Package Code

E

C

F

L

F2

D

V

Type

 

 

 

 

 

 

 

 

TO-92

 

TO-202

TO-220

TO-202

TO-252

TO-251

 

Plastic

Compak

Type 1

Isolated

Type 2

D-Pak

V-Pak

0.8 A

60 [135]

60 *

 

 

 

 

 

1 A

50 [95]

40 *

 

 

 

 

 

4 A

 

 

3.5 [45]

3.6 [50]

6.0 [70]

3.5

6.0 [70]

6 A

 

 

 

3.3

 

3.2

3.2

8 A

 

 

 

2.8

 

2.7

2.7

* Mounted on 1 cm2 copper foil surface; two-ounce copper foil

˚C

120

 

 

 

 

 

 

 

 

 

 

 

CURRENT WAVEFORM: Sinusoidal

 

) -

 

 

 

 

 

LOAD: Resistive or Inductive

 

 

A

 

 

CONDUCTION ANGLE: 360˚

 

 

(T

 

 

 

 

Temperature

100

 

FREE AIR RATING – NO HEATSINK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TO-220 and

 

 

 

 

 

 

 

TYPE 1 and 3 TO-202

 

80

 

 

 

 

TYPE 2 and 4 TO-202

 

 

 

 

 

 

 

Ambient

 

 

 

 

 

and TO-251

 

 

60

 

 

 

 

 

 

 

 

 

Allowable

 

 

 

1 A TO-92

 

 

 

 

 

40

 

 

 

 

 

 

 

 

 

Maximum

25

0.8 A TO-92

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

RMS On-State Current [IT(RMS)] - Amps

Figure E1.1 Maximum Allowable Ambient Temperature versus On-state Current

– ˚C

110

 

 

 

 

 

 

 

 

)

 

 

 

 

CURRENT WAVEFORM: Sinusoidal

 

C

 

 

 

 

 

(T

 

 

 

 

LOAD: Resistive or Inductive

 

 

Temperature

100

 

 

 

CONDUCTION ANGLE: 360˚

 

 

 

 

 

CASE TEMPERATURE: Measured as

 

90

 

 

 

shown on Dimensional Drawings

 

 

 

 

 

 

 

 

 

80

 

 

 

 

 

 

 

 

Case

 

 

 

1 A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Allowable

70

 

 

 

 

 

 

 

 

 

 

0.8 A

 

 

 

 

 

 

60

 

 

 

 

 

 

 

 

Maximum

50

 

 

 

 

 

 

 

 

0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

RMS On-State Current [IT(RMS)] – Amps

Figure E1.2 Maximum Allowable Case Temperature versus On-state Current (0.8 A and 1 A)

http://www.teccor.com

E1 - 6

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog

TECOR DK025L, DK020L, DK015L, D8025L, D8020L Datasheet

Data Sheets

Sensitive Triacs

 

 

- ˚C

110

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

105

 

 

 

 

 

CURRENT WAVEFORM: Sinusoidal

 

)

 

 

 

 

 

LOAD: Resistive or Inductive

 

 

 

C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T

 

 

 

 

 

 

CONDUCTION ANGLE: 360˚

 

 

 

(

100

 

 

 

 

 

CASE TEMPERATURE: Measured as

 

Temperature

 

 

 

 

 

 

 

 

 

 

 

 

shown on Dimensional Drawings

 

 

95

 

 

 

6

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

A

TO-

A

TO-

 

 

 

 

 

 

 

 

 

 

 

8 A

251

 

 

 

 

90

 

 

 

 

 

 

and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

220

(Isolated)

TO-

 

 

TO-

 

 

 

 

 

 

 

 

 

220

 

 

 

Case

85

 

 

 

 

 

 

 

(Isolated)

252

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

80

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Allowable

4 A TYPE 1 and 3 TO-202

 

 

 

 

 

 

6 A TO-251

 

 

4 A TO-220 (Isolated)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 A TO-252

 

75

4 A TO-252

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

70

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Maximum

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

65

4 A TYPE 2 and 4 TO-202

 

 

 

 

 

 

 

 

 

 

 

 

4 A TO-251

 

 

 

 

 

 

 

 

 

 

 

 

 

 

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

1

2

3

 

 

4

5

 

6

 

 

7

 

 

8

RMS On-State Current [IT(RMS)] - Amps

Figure E1.3 Maximum Allowable Case Temperature versus On-state Current (4 A, 6 A, and 8 A)

 

 

20

 

 

 

 

 

 

 

 

 

18

TC = 25

˚C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Instantaneous

)- Amps

16

 

 

 

 

 

 

 

14

 

 

6 A and 8 A

 

 

 

 

 

 

 

 

 

 

 

12

 

 

 

 

 

 

 

T

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(i

 

 

 

 

 

 

 

 

Positive or Negative

On-state Current

10

 

 

 

 

 

 

 

8

 

 

4 A

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

1 A

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

2

 

 

 

 

 

0.8 A

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

0

0.5

0.8

1.0

1.2

1.4

1.6

1.8

Positive or Negative Instantaneous

On-state Voltage (vT) - Volts

Figure E1.4 On-state Current versus On-state Voltage (Typical)

 

 

4.0

 

˚C)

3.0

 

 

 

H

25

 

=

 

I

 

 

C

 

 

(T

2.0

 

H

 

 

 

I

 

 

Ratio of

1.0

 

 

 

 

0

INITIAL ON-STATE CURRENT

=100 mA (DC) 0.8 - 4 A Devices

=200 mA (DC) 6 - 8 A Devices

-65

-40

-15

+25

+65

+110 +125

Case Temperature (TC) - ˚C

Figure E1.5 Normalized DC Holding Current versus Case Temperature

 

 

 

2.0

GT

 

= 25 ˚C)

1.5

 

 

 

C

 

V

 

(T

1.0

 

 

GT

 

 

 

 

V

 

Ratio of

 

.5

0

-65

-40

-15

+25

+65

+110+125

Case Temperature (TC) - ˚ C

Figure E1.6 Normalized DC Gate Trigger Voltage for All Quadrants versus Case Temperature

4.0

 

 

 

˚C)

3.0

 

 

 

= 25

GT

 

 

 

I

 

 

C

 

 

 

 

(T

2.0

 

 

 

GT

 

 

 

 

 

 

 

I

 

 

of

 

 

 

Ratio

 

1.0

 

 

 

 

0

-65

-40

-15

+25

+65

+110+125

Case Temperature (TC) - ˚C

Figure E1.7 Normalized DC Gate Trigger Current for All Quadrants versus Case Temperature

7.0

TC = 25 ˚C

6.0

IGT = 5 mA MAX

Sec

5.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IGT = 10 mA MAX

 

 

 

) -

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gt

4.0

 

 

 

 

 

 

 

 

 

 

IGT = 20 mA

 

(t

 

 

 

 

 

 

 

 

 

 

 

On Time

 

 

 

 

 

 

 

 

 

 

 

MAX

 

3.0

IGT = 3 mA MAX

 

 

 

 

 

 

 

 

 

 

Turn-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

5

6

8

10

20

30

40

60

80

100

DC Gate Trigger Current (IGT) - mA

Figure E1.8 Turn-on Time versus Gate Trigger Current (Typical)

©2002 Teccor Electronics

E1 - 7

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Sensitive Triacs

Data Sheets

 

 

Repetitive)

) – Amps

TSM

Peak Surge (Non-

On-State Current (I

200

 

 

 

 

 

 

 

 

150

 

SUPPLY FREQUENCY: 60 Hz Sinusoidal

NOTES:

 

 

LOAD: Resistive

1) Gate control may be lost during

100

 

RMS On-state Current: [IT(RMS)]: Maximum

and immediately following surge

 

current interval.

80

 

Rated Value at Specified Case Temperature

 

 

2) Overload may not be repeated until

 

 

 

 

 

 

60

 

 

junction temperature has returned

 

 

to steady-state rated value.

 

 

 

40

 

 

 

 

 

 

 

 

30

 

 

 

 

 

 

8

A

20

 

 

 

 

6

A

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

4

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

A

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.8

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

6

8 10

20

30 40

60

100

 

 

200

400 600

1000

Surge Current Duration – Full Cycles

Figure E1.9 Peak Surge Current versus Surge Current Duration

Power Dissipation

– Watts

state

]

D(AV)

On-

[P

Average

 

CURRENT WAVEFORM: Sinusoidal

1.5LOAD: Resistive or Inductive CONDUCTION ANGLE: 360˚

1.0

0.8 A

1 A

0.5

0

0

0.25

0.50

0.75

1.0

1.25

1.5

RMS On-state Current [IT(RMS)] – Amps

Power Dissipation

– Watts

state

]

D(AV)

On-

[P

Average

 

9.0

CURRENT WAVEFORM: Sinusoidal

8.0LOAD: Resistive or Inductive CONDUCTION ANGLE: 360˚

7.0

6.0

6 A and 8 A

5.0

4.0

3.04 A

2.0

1.0

0

0

.5

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

6.0

6.5

7.0

7.5

8.0

RMS On-state Current [IT(RMS)] – Amps

Figure E1.10 Power Dissipation (Typical) versus RMS On-state Current (0.8 A and 1 A)

Figure E1.11 Power Dissipation (Typical) versus RMS On-state Current (4 A, 6 A, and 8 A)

http://www.teccor.com

E1 - 8

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog

 

s*

 

Package

IZED

 

 

SelectedRECOGN#E71639

.

File

 

.L

 

U

 

 

E2

TO-92

TO-202

*TO-220

3-lead Compak

TO-263

 

 

 

D2Pak

TO-252

 

 

 

D-Pak

 

 

*TO-3

TO-251

 

 

V-Pak

MT2

MT1

Fastpak

 

 

 

G

General Description

These gated triacs from Teccor Electronics are part of a broad line of bidirectional semiconductors. The devices range in current ratings from 0.8 A to 35 A and in voltages from 200 V to 1000 V.

The triac may be gate triggered from a blocking to conduction state for either polarity of applied voltage and is designed for AC switching and phase control applications such as speed and temperature modulation controls, lighting controls, and static switching relays. The triggering signal is normally applied between the gate and MT1.

Isolated packages are offered with internal construction, having the case or mounting tab electrically isolated from the semiconductor chip. This feature facilitates the use of low-cost assembly and convenient packaging techniques. Tape-and-reel capability is available. See “Packing Options” section of this catalog.

All Teccor triacs have glass-passivated junctions to ensure longterm device reliability and parameter stability. Teccor's glass-pas- sivated junctions offer a rugged, reliable barrier against junction contamination.

Triacs

(0.8 A to 35 A)

Variations of devices covered in this data sheet are available for custom design applications. Consult factory for more information.

Features

Electrically-isolated packages

Glass-passivated junctions

Voltage capability — up to 1000 V

Surge capability — up to 200 A

Compak Package

Surface mount package — 0.8 A and 1 A series

New small profile three-leaded Compak package

Packaged in embossed carrier tape with 2,500 devices per reel

Can replace SOT-223

©2002 Teccor Electronics

E2 - 1

http://www.teccor.com

Thyristor Product Catalog

 

+1 972-580-7777

Triacs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Data Sheets

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IT(RMS)

 

 

 

 

 

Part Number

 

 

 

 

VDRM

 

 

IGT

 

 

 

 

 

 

Isolated

 

 

Non-isolated

 

 

 

 

 

 

 

(4)

 

 

 

 

 

 

 

 

 

 

 

(1)

 

(3) (7) (15)

 

 

 

 

 

 

 

 

 

MT2

MT2

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G

 

 

 

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MT2

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MT1

 

 

MT2

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MT1

 

 

MT1

 

 

 

 

 

 

 

 

 

 

 

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

MT1

MT2

 

 

 

 

 

 

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G

MT1

G

 

MT1 G

MT1 G

 

 

MT1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MT2

 

 

 

 

 

 

 

 

 

 

 

 

 

MT2

 

MT2

MT2

 

 

 

Volts

 

 

mAmps

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TO-252

 

TO-251

TO-263

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TO-92

TO-220

Compak

TO-202

TO-220

D-Pak

 

V-Pak

D2Pak

 

QI

QII

QIII

QIV

QIV

 

 

MAX

 

 

 

 

See “Package Dimensions” section for variations. (11)

 

 

MIN

 

MAX

TYP

 

 

0.8 A

Q2X8E3

 

 

Q2X3

 

 

 

 

 

 

200

10

10

10

 

25

 

 

 

Q4X8E3

 

 

Q4X3

 

 

 

 

 

 

400

10

10

10

 

25

 

 

 

Q6X8E3

 

 

Q6X3

 

 

 

 

 

 

600

10

10

10

 

25

 

 

 

Q2X8E4

 

 

Q2X4

 

 

 

 

 

 

200

25

25

25

 

50

 

 

 

Q4X8E4

 

 

Q4X4

 

 

 

 

 

 

400

25

25

25

 

50

 

 

 

Q6X8E4

 

 

Q6X4

 

 

 

 

 

 

600

25

25

25

 

50

 

 

1 A

Q201E3

 

 

Q2N3

 

 

 

 

 

 

200

10

10

10

 

25

 

 

 

Q401E3

 

 

Q4N3

 

 

 

 

 

 

400

10

10

10

 

25

 

 

 

Q601E3

 

 

Q6N3

 

 

 

 

 

 

600

10

10

10

 

25

 

 

 

Q201E4

 

 

Q2N4

 

 

 

 

 

 

200

25

25

25

 

50

 

 

 

Q401E4

 

 

Q4N4

 

 

 

 

 

 

400

25

25

25

 

50

 

 

 

Q601E4

 

 

Q6N4

 

 

 

 

 

 

600

25

25

25

 

50

 

 

4 A

 

 

Q2004L3

 

Q2004F31

 

Q2004D3

 

Q2004V3

 

200

10

10

10

 

25

 

 

 

 

 

Q4004L3

 

Q4004F31

 

Q4004D3

 

Q4004V3

 

400

10

10

10

 

25

 

 

 

 

 

Q6004L3

 

Q6004F31

 

Q6004D3

 

Q6004V3

 

600

10

10

10

 

25

 

 

 

 

 

Q2004L4

 

Q2004F41

 

Q2004D4

 

Q2004V4

 

200

25

25

25

 

50

 

 

 

 

 

Q4004L4

 

Q4004F41

 

Q4004D4

 

Q4004V4

 

400

25

25

25

 

50

 

 

 

 

 

Q6004L4

 

Q6004F41

 

Q6004D4

 

Q6004V4

 

600

25

25

25

 

50

 

 

 

 

 

Q8004L4

 

 

 

Q8004D4

 

Q8004V4

 

800

25

25

25

 

50

 

 

 

 

 

QK004L4

 

 

 

QK004D4

QK004V4

 

1000

25

25

25

 

50

 

 

6 A

 

 

Q2006L4

 

Q2006F41

Q2006R4

 

 

 

Q2006N4

200

25

25

25

 

50

 

 

 

 

 

Q4006L4

 

Q4006F41

Q4006R4

 

 

 

Q4006N4

400

25

25

25

 

50

 

 

 

 

 

Q6006L5

 

Q6006F51

Q6006R5

 

 

 

Q6006N5

600

50

50

50

 

75

 

 

 

 

 

Q8006L5

 

 

Q8006R5

 

 

 

Q8006N5

800

50

50

50

 

75

 

 

 

 

 

QK006L5

 

 

QK006R5

 

 

 

QK006N5

1000

50

50

50

 

75

 

 

8 A

 

 

Q2008L4

 

Q2008F41

Q2008R4

 

 

 

Q2008N4

200

25

25

25

 

50

 

 

 

 

 

Q4008L4

 

Q4008F41

Q4008R4

 

 

 

Q4008N4

400

25

25

25

 

50

 

 

 

 

 

Q6008L5

 

Q6008F51

Q6008R5

 

 

 

Q6008N5

600

50

50

50

 

75

 

 

 

 

 

Q8008L5

 

 

Q8008R5

 

 

 

Q8008N5

800

50

50

50

 

75

 

 

 

 

 

QK008L5

 

 

QK008R5

 

 

 

QK008N5

1000

50

50

50

 

75

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

See “General Notes” on page E2 - 4 and “Electrical Specification Notes” on page E2 - 5.

http://www.teccor.com

E2 - 2

©2002 Teccor Electronics

+1 972-580-7777

 

Thyristor Product Catalog

Loading...
+ 194 hidden pages