TANDBERG 3G GATEWAY 4C, 3G GATEWAY 2, 3G GATEWAY 1, 3G GATEWAY 4B, 3G GATEWAY 4A User Manual

0 (0)
TANDBERG 3G GATEWAY 4C, 3G GATEWAY 2, 3G GATEWAY 1, 3G GATEWAY 4B, 3G GATEWAY 4A User Manual

3G Gateway Installation

1

2

3

LAN1 LAN2 LAN3

LAN4

 

 

 

 

LAN4 LAN3 LAN2

LAN1

Unpack the 3G Gateway.

Mount the rack ears and/or rubber feet, if

 

applicable, and turn the unit back on its feet

 

or mount it in the rack.

LAN1 LAN2 LAN3

LAN4

 

Connect the Ethernet LAN cable to socket LAN 1. Connect the null modem cable between the Data socket and a PC.

4a

4b

 

4c

 

I

I

I

 

o

o

o

Depending on version, connect the PRI connector …

or...

connect the 4 PRI connectors …

5

I

6

o

 

 

 

 

I

 

 

 

o

 

 

Connect the power cable and turn on the 3G

 

 

Gateway. Use the LCD display of the unit to set

 

Start a Terminal program on the PC

the IP address – see Configuring the 3G Gateway

 

and configure it to 115 200, 8, 1, None

in the User Manual for details, or...

 

 

 

or...

… connect the 4 BRI connectors.

1.Start a Terminal program on the PC and configure it to

115 200, 8, 1, None

2.When prompted for login, enter username admin and password TANDBERG.

3.Type y to start the installation wizard and press Enter.

4.When prompted, specify a new password, IP settings, local prefix, SSH y/n, and Telnet y/n.

5.When prompted for login, enter username admin and your new password.

6.Press Enter to skip the installation wizard.

7.Reboot the system by typing the command xcommand boot

8.Do the rest of the configuration from the web interface.

115196 rev. 02

Loading...