Sven Pro+ 1000, Pro+ 600, Pro+ 1500, Pro+ 650 LCD, Pro+ 650 USB Operation Manual

www.sven.fi

OPERATION
MANUAL

Uninterruptible
Power Supply

PRO+

ENG

1

Operation Manual

PRO+

CONTENTS

ENG .................................................................................................

1. PRECAUTIONS .......................................................................................

2. SPECIAL FEATURES ................................................................................

3. PACKAGE CONTENTS ............................................................................

4. OPERATING PRINCIPLE ..........................................................................

5. DESCRIPTION .....................................................................................

6. MAIN FUNCTIONS ............................................................................

7. CONNECTION ......................................................................................

8. BATTERY MAINTENANCE ........................................................................

9. TROUBLESHOOTING .............................................................................

10. TECHNICAL SPECIFICATIONS ..................................................................

Technical support is on www.sven.fi

1
2
3
3
3
4
5
5
6
6
7

Congratulations on your purchase of the Sven uninterruptible power supply!

Please read this Оperation Мanual before using the unit and retain this Оperation Мanual in a safe
place for future reference.

COPYRIGHT

© 2014. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Мanual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS

All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted efforts to make this Мanual more exact, some discrepancies may occur. The
information of this Мanual is given on “as is” terms. The author and the publisher do not bear any
liability to a person or an organization for loss or damages which have arisen from the information,
contained in the given Мanual.

UNPACKING

Unpack the device carefully. Make sure there are no accessories left in the box. Check up the
device for damages; if the product was damaged during transportation, address the firm which
carried out the delivery; if the product functions incorrectly, address the dealer at once.

ENG

2

Uninterruptible
Power Supply

1. PRECAUTIONS

Before operating this device, please carefully read the following safety instructions:

• Before switching on the Uninterruptible Power Supply (UPS) in the electric mains for the first time,
it is necessary to charge the storage battery for at least 12 hours. For this purpose the UPS should
be switched on without load.

• If the storage battery has fully run down or the UPS has not been operated for three months, it is
also necessary to charge the storage battery for at least 12 hours. Otherwise, its durability will be
considerably reduced .

• The UPS is designed solely for operation with PCs equipped with switching power supply units*.
It is strongly forbidden to connect inductive or capacitive load, as well as fully resistive load. Such
loads include any devices with transformer power unit, electric engines, fluorescent lamps, laser
printers, any heating appliances, etc.

• During operation, the case of the device can be heated up to 50 °C, which is absolutely normal.

• It is strongly forbidden to open case of the device, as there is high voltage inside. If some prob-

lems occur, please address an authorized service centre. For the list of authorized service centres
please go to www.sven.fi.

• Do not let liquid and foreign objects get inside the device, it can cause short circuit or electric
shock.

• In case there are signs of improper operation of the device (sparkling, unusual smells, etc.), it is
necessary to turn off the device immediately and disconnect it from the mains, and address your
nearest authorized service centre.

• It is forbidden to connect the UPS to equipment with power consumption higher than its
maximum output power. It can cause overload and breakdown of the device.

It is strongly forbidden to operate the device in following conditions:

• in dusty environment or environment containing highly inflammable gas;

• at temperature higher than 40 °C or lower than 0 °C;

• at relative humidity level higher than 90 %;

• in direct sunlight or next to heating elements;

• in vibration places;

• outdoors.

• In case of fire use only powder fire extinguisher, as using water can cause electric shock.

• Try to install the UPS in proximity to power supply, in such way it will be easier to unplug the device

if necessary.

*The device operation is not guaranteed when connecting UPS with APFC (active power factor
correction).