P R O I S L A N D V E N T I L AT I O N H O O D S
INSTALLATION INSTRUCTIONS
C O N TA C T
I N F O R M AT I O N
Wolf Customer Service: 800-332-9513
Website:
wolfappliance.com
As you follow these instructions, you will notice WARNING and CAUTION symbols. This blocked information is important for the safe and efficient installation of Wolf equipment. There are two types of potential hazards that may occur during installation.
signals a situation where minor injury or product damage may occur if you do not follow instructions.
states a hazard that may cause serious injury or death if precautions are not followed.
Another footnote we would like to identify is IMPORTANT NOTE: This highlights information that is especially relevant to a problemfree installation.
WOLF® is a registered trademark of Wolf Appliance Company, LLC
W O L F PRO ISLAND VENTILATION H O O D S
INSTALLATION R E Q U I R E M E N T S |
|
|
|||
IMPORTANT NOTE: This installation must be |
L I S T O F M AT E R I A L S |
||||
completed by a qualified installer or Wolf |
The following is a list of materials shipped |
||||
authorized service center technician. |
|||||
with the Wolf Pro island ventilation hood. |
|||||
|
|
Installer: Please read the entire Installation |
|||
|
|
|
|
||
|
|
|
|
||
|
|
Instructions prior to installation. Save these |
|
Stainless steel island hood |
|
|
|
instructions for the local inspector’s refer- |
|
||
|
|
|
|||
|
|
|
|
||
|
|
ence, then leave them with the homeowner. |
|
Transition with backdraft damper (attached |
|
|
|
|
|||
|
|
Homeowner: Please read and keep these |
|
inside hood—needs to be removed) |
|
|
|
|
|
||
|
|
instructions for future reference and be sure |
|
Decorative stainless steel rails and installa- |
|
|
|
|
|||
|
|
to read the entire Use & Care Information |
|
tion components—(R) model hoods only |
|
|
|
prior to use. |
|
Two control knobs |
|
Any questions or problems about the |
|
||||
|
Filters and grease cups (installed in hood) |
||||
installation should be directed to your Wolf |
|
||||
|
|
||||
dealer or Wolf Appliance Company, LLC at |
|
(8–16) #10 x 2" (51) self-tapping hex head |
|||
|
|||||
800-332-9513. You can also visit our website |
|
screws (number of screws varies with the |
|||
at wolfappliance.com. |
|
width of the island hood) |
|||
IMPORTANT NOTE: This appliance must be |
|
(4) 1/4" x 3" (76) lag screws |
|||
|
|||||
installed in accordance with National Electrical |
|
Installation package (taped to filters) |
|||
Codes, as well as all state, municipal and local |
|
||||
|
Installation Instructions |
||||
codes. The correct voltage, frequency and |
|
||||
|
|||||
amperage must be supplied to the appliance |
|
Use & Care Information and product |
|||
from a dedicated, grounded circuit which is |
|
||||
|
registration card |
||||
protected by a properly sized circuit breaker or |
|
||||
|
Wolf logo nameplate |
||||
time delay fuse. The proper voltage, frequency, |
|
||||
|
|||||
|
|
||||
and amperage ratings are listed on the product |
|
|
|||
rating plate. |
|
|
|||
Record the model and serial numbers before |
|
|
|||
installing the Pro island ventilation hood. Both |
|
|
|||
numbers are listed on the rating plate, located |
|
|
|||
on the left wall of the hood shell. |
|
|
Island Hood
Island Hood
(R) Rail Option
Model Number
Serial Number
Location of rating plate inside left wall
Rating plate location |
|
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. |
3 |
A C C E S S O R I E S
Optional accessories are available through your
Wolf dealer. To obtain local dealer information, visit the Locator section of our website, wolfappliance.com.
W O L F PRO ISLAND VENTILATION H O O D S
INSTALLATION C O N S I D E R AT I O N S
IMPORTANT NOTE: Wolf Pro island ventilation hoods are recommended for use with all Wolf cooking appliances.
Proper installation is the responsibility of the installer. Product failure due to improper installation is not covered
under the Wolf Warranty. Refer to the Wolf Pro Ventilation Hoods Use & Care Information for warranty details, or visit the Contact/Help section of our website, wolfappliance.com.
Make sure you have the tools and materials necessary for proper installation.
Warranty service must be performed by a Wolf authorized service center. Wolf is not responsible for service required to correct a faulty installation.
IMPORTANT NOTE: Wolf Pro ventilation hoods are shipped without the blower assembly. Wolf internal, in-line and remote blower assemblies are available; refer to pages 13–15. Use only a Wolf blower with the Pro island hood.
IMPORTANT NOTE: Wolf recommends that the Pro island ventilation hood be installed 30" (762) to 36" (914) above the countertop.
Rail option (R) island hoods come with classic stainless steel decorative rails and stand-offs on both sides of the hood. Optional platinum or brass rails are available to match Wolf dual fuel range bezels. Contact your Wolf dealer for details.
E L E C T R I C A L R E Q U I R E M E N T S
Wolf Pro island ventilation hoods require a separate, grounded 110/120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker. Locate the electrical supply through the top of the hood. Refer to the Installation Specifications illustration on the following page.
You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.
D U C T C O V E R
If you are installing a Wolf duct cover with the Pro island hood, refer to instructions on page 8 before installing the hood.
4
INSTALLATION I N S T R U C T I O N S
OVERALL D I M E N S I O N S
P RO I S L A N D H O O D S
Overall Widths |
36" (914), 42" (1067), |
|
|
54" (1372) and 66" (1676) |
|
|
|
|
Overall Height |
|
18" (457) |
|
|
|
Overall Depth (excluding rails) |
34" (864) |
|
|
|
|
Shipping Weight (shell only) |
95–168 lbs |
|
|
|
(43–76 kg) |
|
|
|
Dimensions may vary to ±1/8" (3).
|
|
|
|
|
TOP WIDTH |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
SUBTRACT 18" (457) FROM OVERALL WIDTH |
|
|
|
|
|
|
|
|
|
|
(330) |
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4" (19) |
|
||||||
|
|
|
|
|
|
|
|
|
|
18" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
(457) |
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIAMETER |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OVERALL |
|
|||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HEIGHT |
|
|
OF RAIL |
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4"(102) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
OVERALL WIDTH |
|
|
|
|
|
|
2" |
|
|
|
|
|
|
|
|
|
|
34" (864) |
|
|
|
|
|
|
|
2" |
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
(51) |
|
|
|
|
|
|
|
OVERALL DEPTH |
|
|
(51) |
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro Island Hood
INSTALLATION S P E C I F I C AT I O N S
LOCATION OF ELECTRICAL SUPPLY
CENTERED THROUGH TOP OF HOOD
|
|
|
|
|
|
18" (457) |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
HEIGHT |
|||||||
|
|
|
|
|
|
|
|
|
OF HOOD |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
34" (864) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WIDTH OF HOOD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DEPTH OF HOOD |
||
|
|
|
|
|
|
|
|
|
||||||||
|
30" TO 36" |
|
|
30" TO 36" |
||||||||||||
|
(762–914) |
|
|
|
(762–914) |
|||||||||||
TO COUNTERTOP |
|
|
TO COUNTERTOP |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro Island Hood
Dimensions in parentheses are in |
|
millimeters unless otherwise specified. |
5 |
W O L F PRO ISLAND VENTILATION
INSTALLATION S P E C I F I C AT I O N S
The illustration and chart below provides dimensions critical for proper installation of the Wolf Pro island ventilation hood.
B
WIDTH OF
TOP PLATE
10" (254) 61/2" (165)
C |
13" |
(330) |
|
HEIGHT OF |
|
TRANSITION |
|
D
TO CENTER
OF TRANSITION
34" (864) |
A |
DEPTH OF |
WIDTH OF |
HOOD |
HOOD |
|
|
Pro Island Hoods
H O O D S
To reduce the risk of fire and electric shock, install this ventilation hood only with a blower manufactured by Wolf. Blower model numbers are listed on page 17.
Model |
(A) |
(B) |
(C) |
(D) |
I363418 |
36" (914) |
18" (457) |
8 3/4" (222) |
9" (228) |
I423418 |
42" (1066) |
24" (610) |
8 3/4" (222) |
12" (304) |
I543418 |
54" (1371) |
36" (914) |
8 3/4" (222) |
18" (457) |
I663418 |
66" (1676) |
48" (1219) |
8 3/4" (222) |
24" (610) |
Letters correspond to those in the illustration.
6