Star Manufacturing CG14, GR10, CG10, GR14 User Manual

0 (0)
®
TWO-SIDED
GRILLS
MODEL
CG10, GR10
Installation and
Operation
Instructions
2M-Z2906 Rev. M 6/22/06
14 x 14 Grooved Grill
1
SAFETY SYMBOL
Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability.
Star reserves the right to change specifi cations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifi cations contained in this sheet are subject to change without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifi cations. By using the information provided, the user assumes all risks in connection with such use.
These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to
ensure a faster service.
Model No.
Serial No.
Voltage
Purchase Date
Authorized Service Agent
Reference the listing provided with the unit
or
for an updated listing go to:
Website: www.star-mfg.com E-mail Service@star-mfg.com Telephone: (800) 807-9054 Local (314) 781-2777
The Star Service Help Desk
Business 8:00 am to 4:30 p.m. Central Standard Time Hours:
Telephone: (800) 807-9054 Local (314) 781-2777
Fax: (800) 396-2677 Local (314) 781-2714
E-mail Parts@star-mfg.com
Service@star-mfg.com Warranty@star-mfg.com
Website: www.star-mfg.com
Mailing Address: Star Manufacturing International Inc.
10 Sunnen Drive St. Louis, MO 63143 U.S.A
2
2
PRODUCT IDENTIFICATION
Star Manufacturing International, Inc. Two Sided Grills Models:
GR10-120V- Smooth Top and Bottom Platens Aluminum, without Timer
GR10-120VC-Smooth Top and Bottom Platens Aluminum, without Timer Canadian
GR10T-120V- Smooth Top and Bottom Platens Aluminum, with Timer
GR10T-120VC-Smooth Top and Bottom Platens Aluminum with Timer Canadian
GR10-240V- Smooth Top and Bottom Platens Aluminum, without Timer
GR10T-240- Smooth Top and Bottom Platens Aluminum, with Timer
GR10I-120V- Smooth Top and Bottom Platens Cast Iron, without Timer
GR10I-120VC-Smooth Top and Bottom Platens Cast Iron without Timer Canadian
GR10IT-120V- Smooth Top and Bottom Platens Cast Iron, with Timer
GR10IT-120VC- Smooth Top and Bottom Platens Cast Iron, with Timer Canadian
GR10I-240V- Smooth Top and Bottom Platens Cast Iron, without Timer
GR10IT-240- Smooth Top and Bottom Platens Cast Iron, with Timer
CG10I-120V- Grooved Top and Bottom Platens Cast Iron, without Timer
CG10I-120VC-Iron Grooved Top & Bottom Platens, without Timer Canadian
CG10IT-120V-Grooved Top and Bottom Platens Cast Iron, with Timer
CG10IT-120VC-Iron Groved Top and Bottom Platens, with Timer Canadian
CG10I-240V- Grooved Top and Bottom Platens Cast Iron, without Timer
CG10IT-240V- Grooved Top and Bottom Platens Cast Iron, with Timer
GR14I-240V- Iron Smooth Top and Bottom Platens, without Timer
GR14IT-240V- Iron Smooth Top and Bottom Platens, with Timer
CG14IGT-240V- Iron Grooved Top and Smooth Bottom Platens, without Timer
CG14ITGT-240V- Iron Grooved Top and Smooth Bottom Platens, with Timer
CG14I-240V-Iron Grooved Top and Bottom Platens, without Timer
CG14IT-240V- Iron Grooved Top and Bottom Platens, with Timer
CG14IT-120V-Iron Grooved Top and Bottom, with Timer
CG14IT-120VC-Iron Grooved Top and Bottom, with Timer Canadian
CG14-120V- Aluminum Grooved Top and Bottom Platens, without Timer
CG14-120VC-Aluminum Grooved Top and Bottom Platens, without Timer Canadian
continued on page 4
3
PRODUCT IDENTIFICATION - Continued
Star Manufacturing International, Inc. Two Sided Grills Models:
CG14T-120V- Aluminum Grooved Top and Bottom Platens, with Timer
CG14T-120VC-Aluminum Grooved Top and Bottom Platens, with Timer Canadian
CG14-240V- Aluminum Grooved Top and Bottom Platens, no Timer
CG14T-240V-Aluminum Grooved Top and Bottom Platens, with Timer
GR14-240V- Aluminum Smooth Top and Bottom Platens, without Timer
GR14T-240V- Aluminum Smooth Top and Bottom Platens, with Timer
GR14-120V- Aluminum Smooth Top and Bottom Platens, wihtout Timer
GR14-120VC-Aluminum Smooth Top and Bottom Platens, wihtout Timer Canadian
GR14SN-120V - Snub Nose Smooth Top and Bottom Aluminum
GR14SN-120VC - Snub Nose Smooth Top and Bottom Aluminum Canadian
GR14T-120V-Aluminum Smooth Top and Bottom Platens, with Timer
GR14T-120VC-Aluminum Smooth Top and Bottom Platens, with Timer Canadian
CG14-2T-120V-Grooved Top and Bottom Platens Aluminum, with 2 Timers
CG14-2T-120VC-Grooved Top and Bottom Platens Aluminum, with 2 Timers Canadian
GR14-2T-120VC-Aluminum Smooth Top and Bottom Platens, with 2 Timers Canadian
GR14C-240V-Chrome Smooth Top and Bottom Platens, without Timer
4
GENERAL INSTALLATION DATA
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels
associated with the unit prior to putting it into operation. Make sure all people associated with its use understand the units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in damaged condition, either apparent or concealed, a claim must be made with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a request for inspection of concealed damage must be made with carrier within 15 days. Be certain to retain all contents plus external and internal packaging materials for
inspection. The carrier will make an inspection and will supply necessary claim forms.
VENTILATION AND CLEARANCES
The installation of any components such as a vent hood, grease extractors, and/or fi re extinguishing systems, must conform to their applicable nationally recognized installation
standards and/or local building codes.
ELECTRICAL CONNECTION
WARNING
Before making any electrical connection be sure to read data plate which is located at the bottom of the unit.
ELECTRICAL GROUNDING INSTRUCTIONS
This unit is equipped with a 3-prong (grounding) plug for your protection against shock hazard and must be plugged directly into a properly grounded 3-prong receptacle.
CAUTION
DO NOT CUT OR REMOVE THIS PLUG OR GROUNDING PRONG FROM THE PLUG.
CAUTION
CONNECT/PLUG UNIT INTO DEDICATED A.C LINE ONLY SPECIFIED ON THE DATA PLATE OF THE UNIT.
5
ELECTRICAL SPECIFICATIONS
Model No. Volts Rated Wattage Amps NEMA Plug
GR 10 120 1800 15 5-15P GR 10 240 1800 7.5 6-15P GR 10I 120 1800 15 5-15P GR 10I 240 1800 7.5 6-15P CG 10I 120 1800 15 5-15P CG 10I 240 1800 7.5 6-15P
Note: For Canada, 120 volt units listed above have NEMA 5-20P plug.
Model No. Volts Rated Wattage Amps NEMA Plug
GR 14 120 1800 15 5-15P GR 14 240 1800 7.5 6-15P CG 14 120 1800 15 5-15P CG 14 240 1800 7.5 6-15P GR 14I 240 3600 15 6-20P CG14I 120 1800 15 5-15P CG 14I 240 3600 15 6-20P CG 14IGT 240 3600 15 6-20P GR 14C 240 3600 15 6-20P
Note: For Canada, 120 volt units listed above have NEMA 5-20P plug and 12/3 gage cord.
INITIAL START UP
Level unit using the adjustable feet under the unit (approximately 1/2" adjustment).
Before using the unit for the fi rst time, clean and heat for approximately 30 minutes. The grill may emit a small amount of smoke as the cooking surfaces reach 300-350°F. Do not be alarmed, as the smoke is caused by oils associated with the manufacturing process and will stop when the grill reaches 400°F.
SEASONING THE COOKING SURFACES (NON CHROME SURFACES)
FIRST TIME SEASONING
Follow your company/corporate guidelines for seasoning cooking surfaces. or
1. Bring the grill to 300°F and leave it on while doing the next three steps.
2. Brush the cooking surfaces with a release agent. If using an aerosol agent, fi rst apply into a cup and then brush onto cooking surface.
3. Let sit for 20 minutes, and then wipe clean using a warm damp cloth.
DAILY SEASONING
The grill should not require much seasoning while in use. In most cases, brush a light coating of the baking release agent in the morning and occasionally throughout the day will be enough to prevent any sticking. It is not necessary to spray before grilling each item.
6
Loading...
+ 14 hidden pages