Sony TDM-BT1 User Manual

0 (0)

2-899-394-11(1)

Bluetooth

Wireless Audio Adapter

Operating Instructions

US

Mode d’emploi

 

Manual de instrucciones

 

FR

 

 

 

 

ES

TDM-BT1

©2007 Sony Corporation

WARNING

For the customers in the U.S.A

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this

2 equipment.

The shielded interface cable recommended in this manual must be used with this equipment in order to comply with The limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

This transmitter must not be colocated or operated in conjunction with any other antenna or transmitter.

This equipment complied with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment should be installed and operated with at least 20cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).

US

For the customers in Canada

This device complies with RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

This equipment complies with IC radiation exposure limits set forth for uncontrolled equipment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated with at least 20cm and more between the radiator and person’s body (excluding extremities: hands, wrists,

feet and ankles).

This Class B digital apparatus complies with Canadian ICES-003.

The nameplate is located on the bottom exterior.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.

Other trademarks and trade names are those of their respective owners.

Table of

Contents

Features ...........................

4

How to use the unit ..............

5

GETTING STARTED

Unpacking ........................

6

Location of Parts .............

6

OPERATING THE

UNIT

Using the unit

.................. 7 US

Preparation ..........................

7

Pairing .................................

7

Connecting ..........................

9

Initializing .........................

10

ADDITIONAL

INFORMATION

Precautions ....................

11

Troubleshooting ............

13

What is BLUETOOTH

 

technology? ...................

14

Specifications ................

15

3

US

Features

You can enjoy listening to a BLUETOOTH stereo audio source device (mobile phone, digital music player, etc.) *, with a DIGITAL MEDIA PORT jack (Sony Home Theatre System, etc.) connected to this unit using BLUETOOTH wireless technology, and convert digital wireless audio signals to analog (analogue) audio signals.

Example

 

 

 

 

Stereo audio

BLUETOOTH mobile phone

This unit

or other BLUETOOTH stereo

 

output device

audio source device

 

 

*BLUETOOTH devices to be connected with this unit are required to support A2DP (Advanced Audio Distribution Profile).

Notes

DIGITAL MEDIA PORT is occasionally abbreviated as DMPORT.

For details on how to operate the devices to be connected, refer to the operating instructions supplied with each device.

For details regarding compatible BLUETOOTH connectable devices, visit the following URLs.

Customers in the U.S.A. http://sony.com/support

Customers in Canada http://www.sony.ca/support

Customers in Europe http://support.sony-europe.com

4

US

Sony TDM-BT1 User Manual

How to use the unit

In the example below, we will explain how to receive music played on a BLUETOOTH mobile phone via the music playback function on this unit, and listen to music on a stereo audio output device with a DIGITAL MEDIA PORT jack (DAV series, etc.) connected to this unit.

1. Pairing

Enables a BLUETOOTH mobile phone and this unit to recognize one another.

BLUETOOTH Pairing

This unit Stereo audio

mobile phone

output device

 

For more details, see pages 7 and 9.

 

v

2. BLUETOOTH connection

Operate the BLUETOOTH mobile phone to make the BLUETOOTH connection.

Connection

 

 

3. Receiving music

v

 

Enjoy listening to music played on a BLUETOOTH mobile

 

phone through a stereo audio output device (DAV series, etc.)

 

connected to this unit.

 

 

Stereo audio signal

 

(Streaming)

For more details, see page

9. 5

 

US

GETTING STARTED

Unpacking

BLUETOOTH Wireless Audio Adapter (1)

Operating Instructions (1)

Location of Parts

OPR

RESET

1 OPR button (7)

2 DIGITAL MEDIA PORT cable (7)

3 RESET button (10)

4 LED status indicator

 

Status

LED status indicator

 

Ready

Lights up for 2 seconds

 

 

 

 

Pairing mode

Flashes very quickly

 

 

 

 

Connection possible

Flashes slowly

 

 

 

 

Connect

Constantly on

 

 

6

Disconnect

Flashes quickly

 

 

US

OPERATING THE UNIT

Using the unit

Preparation

1Connect the DIGITAL MEDIA PORT cable of this unit to the DIGITAL MEDIA PORT jack of a stereo audio output device (DAV series, etc.). Make sure the output device is turned off before connecting.

 

To DIGITAL MEDIA

 

PORT jack

 

DMPORT

This unit

Stereo audio

 

output device

2Turn on the stereo output device with a DIGITAL MEDIA PORT jack (DAV series, etc.) connected to this unit, and select the DIGITAL MEDIA PORT input.

The LED status indicator lights up for 2 seconds to indicate “Ready.”

Pairing

What is pairing?

BLUETOOTH devices need to be “paired” with each other beforehand. Once BLUETOOTH devices are paired, there is no need for pairing again, except in the following cases:

Pairing information is deleted after repair, etc.

This unit can be paired with up to 8 BLUETOOTH stereo audio source devices. If a new device is paired thereafter, the device with the oldest registration among the 8 paired devices is replaced by the new one.

Continued 7

US

1 Press and hold the OPR button for 3 seconds or more.

OPR

O PR

The LED status indicator starts flashing very quickly and this unit enters pairing mode.

Note

Pairing mode is canceled automatically if pairing is not achieved within 5 minutes, or manually by pressing the OPR button. If pairing mode is canceled midway, start over from step 1.

2Perform pairing procedure on the BLUETOOTH stereo audio source device to detect this unit.

The list of detected devices appears on the display of the BLUETOOTH stereo audio source device.

This unit is displayed as “TDM-BT1.”

If “TDM-BT1” is not displayed, repeat from step 1.

Notes

When pairing, be sure to place both the BLUETOOTH devices within 1 m (about 3 ft) of each other.

Some devices cannot display the list of detected devices.

To operate the BLUETOOTH stereo audio source device, refer to the operation instructions of the device.

3Select “TDM-BT1” on the display of the BLUETOOTH

stereo audio source device.

4If Passcode* input is required on the BLUETOOTH stereo audio source device, input “0000”.

When BLUETOOTH pairing is complete, the LED status indicator flashes slowly and pairing information is memorized on this unit.

* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”

Notes

Some BLUETOOTH stereo audio source devices may connect with the unit automatically when pairing is completed. For other devices, you will have to connect to this device manually.

If you disconnect this unit or the BLUETOOTH stereo audio source device, before a connection is complete, pairing information is not memorized, and

8

pairing will not be completed.

US

When pairing with a BLUETOOTH stereo audio source device that cannot display a list of detected devices or that has no display

You may pair the device by setting both this unit and the BLUETOOTH stereo audio source device to pairing mode. For details, refer to the operating instructions supplied with the device.

Note

For devices without a display screen the device must have a default pin code of “0000” to work with the TDM-BT1.

If pairing is not complete

Start over from step 1.

Note

Passcode of this unit is fixed to “0000”. This unit cannot be paired with a BLUETOOTH stereo audio source device whose Passcode is not “0000”.

Tip

To pair with other BLUETOOTH stereo audio source devices, repeat steps 1 to 5 for each device.

Connecting

Check “Preparation” (page 7) and “Pairing” (page 7) before operating the unit.

1Check to see if the LED status indicator flashes slowly, indicating connection is possible.

Note

If the LED status indicator turns off, perform the pairing procedure, or press the OPR button momentarily.

2Start the BLUETOOTH connection from the BLUETOOTH stereo audio source device.

3Start music playback on the BLUETOOTH stereo audio source device.

Notes

After connection is complete, the LED status indicator becomes constant.

Turn off the bass boost function or equalizer function of the BLUETOOTH stereo audio source device. If these functions are on, sound may be distorted.

Continued 9

US

To finish connecting

Terminate the BLUETOOTH connection by any of the operations below.

Operate the BLUETOOTH stereo audio source device to terminate the connection. For details, refer to the operating instructions supplied with the device.

Turn off the BLUETOOTH stereo audio source device.

Press the OPR button momentarily. Until the disconnection is complete, the LED status indicator flashes.

Note

In the following cases, you need to make the BLUETOOTH connection again.

The BLUETOOTH connection is disconnected once.

The power of the BLUETOOTH stereo audio source device does not turn on, or the BLUETOOTH signal is off.

The BLUETOOTH stereo source device is in sleep mode.

The BLUETOOTH connection is not made.

To turn off the BLUETOOTH signal

Even if you stop BLUETOOTH communication with the BLUETOOTH stereo audio device, this unit continues to send out signals. You can stop the signal completely by the operations below.

When the LED is on:

Press momentarily the OPR button to stop BLUETOOTH communication with the BLUETOOTH stereo audio device. Then press momentarily the OPR button again to turn off the signal from the unit.

When the LED is flashing:

Press momentarily the OPR button to turn off the signal from the unit.

Initializing

You can reset this unit to its default setting and delete all pairing information.

If this unit is turned on, use a thin pointed object (such as a paper clip) to press the RESET button to initialize this unit.

The LED status indicator flashes twice, and this unit is reset to the default.

All pairing information is deleted.

Note

If this unit is connected to a BLUETOOTH device, you cannot reset this 10 unit.

US

ADDITIONAL INFORMATION

Precautions

BLUETOOTH wireless technology operates within a range of about 10 m (about 33 ft). Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment.

BLUETOOTH stereo audio source device

This unit

Steel cabinet

Optimal performance

Limited performance

The following conditions may affect the sensitivity of BLUETOOTH communication.

There is an obstacle such as a person, metal, or wall between this unit and BLUETOOTH device.

A device using 2.4 GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near this unit.

This unit is installed horizontally on a desk made of steel.

Because BLUETOOTH devices and wireless LAN (IEEE802.11b/ g) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if this unit is used near a wireless LAN device. In such a case, perform the following.

– Use this unit at least 10 m (about 33 ft) away from the wireless LAN device.

– If this unit is used within 10 m (about 33 ft) of a wireless LAN device, turn off the wireless LAN device.

– Install this unit and BLUETOOTH device as near to each other as possible.

Microwaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause an accident.

– where inflammable gas is present, in a hospital, train, airplane, or a gas (petrol) station

– near automatic doors or a fire alarm

Refer to “To turn off the BLUETOOTH signal” (page 10) for further details regarding how to quit BLUETOOTH connection of this unit.

11

US

This unit supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using BLUETOOTH wireless technology.

We do not take any responsibility for the leakage of information during BLUETOOTH communication.

Connection with all BLUETOOTH devices cannot be guaranteed.

A device featuring BLUETOOTH function is required to conform to the BLUETOOTH standard specified by BLUETOOTH SIG, and be authenticated.

Even if the connected device conforms to the above mentioned BLUETOOTH standard, some devices may not be connected or work correctly, depending on the features or specifications of the device.

Depending on the device to be connected, it may require some time to start communication.

12

On safety

Do not drop, hit, or otherwise expose the unit to strong shock of any kind. This could damage the product.

Do not disassemble or attempt to open any parts of the unit.

On placement

Do not place the unit in any of the following locations.

Direct sunlight, near a heater, or other extremely high-temperature location

Dusty location

An unsteady or inclined surface

Location exposed to large amounts of vibration

Bathroom or other high-humidity location

In a car subject to the direct rays of the sun.

Notes when using with a mobile phone

You cannot use this unit to talk over the telephone, even if the BLUETOOTH connection between this unit and a mobile phone is made.

For details on operation of your mobile phone when receiving a telephone call while transmitting music using the BLUETOOTH connection, refer to the operating instructions supplied with the mobile phone.

Others

If you have any questions or problems concerning this unit that are not covered in this manual, please consult your nearest Sony dealer.

Should any problem persist, consult your nearest Sony dealer.

US

Troubleshooting

If you run into any problems using this unit, use the following checklist. Should any problem persist, consult your nearest Sony dealer.

No sound

,Check the connection between this unit and the stereo audio output device connected to this unit.

,Check that both this unit and the BLUETOOTH stereo audio source device are turned on.

,Ensure that this unit is not too far from the BLUETOOTH stereo audio source device, or this unit is not receiving interference from a wireless LAN, other 2.4 GHz wireless device, or microwave oven.

,Check that the BLUETOOTH connection is made properly between this unit and the BLUETOOTH stereo audio source device.

,Turn up the volume of the stereo audio output device.

,Turn up the volume of the BLUETOOTH stereo audio source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the BLUETOOTH stereo audio source device.

,Pair this unit and the BLUETOOTH stereo audio source device again.

Low sound level

,Turn up the volume of the BLUETOOTH stereo audio source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the BLUETOOTH stereo audio source device.

,Turn up the volume of the stereo audio output device.

Distorted sound

,Turn down the volume of the BLUETOOTH stereo audio source device to the point where the sound is no longer distorted. For details on volume adjustment, refer to the operating instructions supplied with the BLUETOOTH stereo audio source device.

Sound skips or the correspondence distance is short.

,If a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device(s), or a microwave oven is nearby, move away from such sources.

,Remove any obstacle between this unit and other BLUETOOTH device or move away from the obstacle.

13

US

,Locate this unit and other BLUETOOTH device(s) as near as possible.

,Re-position this unit.

,Re-position other BLUETOOTH device.

Pairing cannot be done.

,Bring this unit and the BLUETOOTH device closer together.

,Verify BLUETOOTH audio source device has pin code of “0000”.

,Turn off the BLUETOOTH function of all other unused BLUETOOTH device(s).

The BLUETOOTH stereo audio source device cannot connect to this unit.

,Turn off the BLUETOOTH function of all other unused BLUETOOTH device(s).

Sound is delayed.

,If you watch a TV or a DVD through BLUETOOTH connection via this unit, sound may lag behind the picture.

What is BLUETOOTH

technology?

BLUETOOTH wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer or digital camera. BLUETOOTH wireless technology operates within a

14 range of about 10 m (about 33 ft).

Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.*

You do not need to use a cable for connection since BLUETOOTH technology is a wireless technology, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. BLUETOOTH technology is an international standard supported by millions of companies all over the world, and employed by various companies worldwide.

*This unit cannot be connected to multiple devices at the same time.

Communication System and Compatible BLUETOOTH Profile of this unit

Profile is standardization of the function for each BLUETOOTH device specification. This unit and the BLUETOOTH audio source device needs to support the following BLUETOOTH version and profile to work together:

Communication System: BLUETOOTH Specification version 2.0

Compatible BLUETOOTH Profile:

A2DP (Advanced Audio Distribution Profile)

US

Loading...
+ 30 hidden pages