Rugged CCTV
5327 Cedar Creek, Kemp, Texas 75143, USA
Tel: 866-301-CCTV, Fax: 903-498-8989
C A U T I O N
Risk of Electric Shock
Do Not Open
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
TABLE OF CONTENTS
PRECAUTIONS |
2 |
FEATURES |
2 |
PART NAMES |
3 |
CONTROLS |
4-6 |
INSTALLATION |
7-13 |
TROUBLESHOOTING |
14 |
SPECIFICATIONS |
15 |
DIMENSIONS |
16 |
-1-
PRECAUTIONS
Safety
The camera should be operated only from the type of power source indicated on the marking label.
Do not disassemble the camera.
Do not allow anything to get inside of the camera.
Do not drop the camera.
Installation
Camera should be operated within operating temperature range and less than 90% of humidity.
Avoid installing the camera in harsh environments that include lots of dust, vibration,or strong magnetic and radio frequencies.
FEATURES
Cable managed bracket with stylish designed bracket assembly, with cables concealed inside the bracket.
1/3" Format Sony Super HAD CCD
DSP(Digital Signal Processing)to provide a clear, high-resolution image in all types of lighting situations
Horizontal Resolution of 480 TV Lines
Auto & Manual White Balance
AGC On/Off / BLC On/Off / ELC/ALC Selectable
Dual power (DC 12V or AC 24V)
IP RATE 66 Weatherproof Housing
DC-type auto-iris lens
The optional built-in heater protects the camera from cold environments
(heater operates at 24VAC power only)
-2-
PART NAMES
13
12 11
10
1 |
2 |
14 |
3 |
4 |
5 |
6 |
7 |
|
9
1.GLASS HOLDER : Retaining ring for front glass.
(To keep the unit weather proof, do not unscrew this section)
2.HOUSING : Unscrew this section to gain access to adjust the lens and dip switches.
3.LENS : Vari-Focal Lens provide manual zoom and focus adjustments to Set the field of view for the application.
4.LENS MOUNT LOCK : Lock screw used to secure the lens mount.
5.FUNCTION CONTROL BOARD : Board to adjust the various settings of the camera.
6.AIR VENT : Provides airflow to the internal fan.
(Keep this vent pointed down to prevent water from entering the housing)
7.BRACKET ASSEMBLY : Rear cover and pan/tilt bracket where cables are concealed and passed through.
8.FAN : If the internal temperature of the camera rises, the fan
will operate automatically to prevent over heating of the camera components.
9.CABLE SET : Cables for power and video
10.BODY : Main section of the camera that contains the electronics.
11.SUNSHIELD LOCK SCREW : Secures the sunshield in the desired position.
12.MOUNT : These holes allow the camera to be top or bottom mounted.
13. SUNSHIELD : Protects the camera from excess heat and glare.
14. OPTIONAL HEATER : Protects the camera from cold environments.
-3-
CONTROLS ( DC12V / AC24V~ ) : Dual Power Type
10 |
9 1 DIP SWITCH |
11
12
13 14
FUNCTION CONTROL BOARD
|
|
|
|
|
|
1 |
|
|
|
LL |
|
ON |
|
3 |
|
||
|
|
B1 |
ON |
|
|
|||
|
W |
|
|
5 |
||||
T |
|
B2 |
|
N |
|
|||
W |
|
O |
|
|||||
IN |
|
|
|
B3 |
ON |
|
||
|
FF |
|
W |
|
|
|||
O |
|
|
|
C |
|
7 |
||
|
FF |
|
|
AG |
|
|||
2 |
O |
|
|
|
|
C |
O |
|
FF |
|
|
|
EL |
|
|||
|
O |
|
|
|
|
|
N |
|
|
|
|
|
|
C |
N |
||
4 |
FF |
|
|
|
|
BL |
|
O |
O |
|
|
|
|
|
KL |
||
C |
|
|
|
|
FL |
|
||
|
AL |
|
|
|
|
|
|
|
|
FF |
|
|
|
|
|
|
|
6 |
O |
|
|
|
|
|
|
|
FF |
|
|
|
|
|
|
||
|
O |
|
|
|
|
|
|
|
|
8 |
DIP SWITCH |
||||||
|
|
16
1.INT/LL
Internal/Line Lock selection. Internal : only DC12V Linelock : only AC24V ~
GND
VIDEO
OUT
15 |
RED(+) |
|
|
|
|
|
BLACK(-) |
24VAC |
|
OR 12VDC |
GREEN(COMMON)
MOUNTING PLATE
2~4. WHITE BALANCE SWITCHES(ATW=Auto White Balance /MWB =Manual)
WB1 |
WB2 |
WB3 |
FUNCTION |
ON |
ON |
ON |
ATW Mode |
ON |
OFF |
ON |
Push Mode |
ON |
OFF |
OFF |
Hold/MWB Lock |
ON |
ON |
OFF |
MWB Mode |
ATW Mode
WB1 |
WB2 |
WB3 |
FUNCTION |
OFF |
ON |
ON |
Approx 3200 K |
OFF |
ON |
OFF |
Approx 4200 K |
OFF |
OFF |
ON |
Approx 4700 K |
OFF |
OFF |
OFF |
Approx 6300 K |
Default setting. Camera will adjust white balance automatically.
Push Mode
Places camera in auto white balance mode without the usual range limits to help with certain lighting conditions(Example: a scene with strong red lighting). May affect overall color balance due to the usual limit being ignored.
Hold/MWB Lock
Will keep the chosen settings after adjusting the camera using the MWB
Mode(below)
MWB Mode
Use the phase up/down buttons to cycle the camera through various color balance settings.
-4-
Set DIP switches to the <Hold/MWB Lock> position to maintain this settings. Note :The camera white balance can also be set manually as shown in the
chart above on right.
5. AGC ON/OFF
Automatic Gain Control on/off
6. ALC/ELC
Auto-iris lens / Electronic shutter
7. BLC ON/OFF
Backlight Compensation switch
8.FLKL ON/OFF
Flickerless mode on/off
9.SELECTION BUTTON
Phase Up for LL mode/Blue control for MWB mode
10.SELECTION BUTTON
Phase Down for LL mode/Red control for MWB mode
11. VIDEO/DC LENS |
|
|
|
DC |
|
|
|
LENS |
|
|
|
|
Select Auto-iris mode. DC is the default.
12. DC LEVEL |
|
|
|
|
|
|
|
|
VIDEO |
|
|||||||||||
|
|
|
|
|
|
|
|
LENS |
|
||||||||||||
|
|
DC Lens level control at auto iris mode. |
|
|
|
|
|||||||||||||||
13. LENS CONNECTOR |
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
1 |
PIN |
|
DC |
VIDEO |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
Cont. + |
N.C |
|||
|
|
|
|
|
|
|
|
2 |
|
|
|
|
2 |
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
Drive + |
VIDEO |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
3 |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
3 |
|
Cont. - |
B+ |
|||||||
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
4 |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
4 |
|
Drive - |
GND |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14.CCD
1/3'' imager
15.POWER CORD
12VDC/24VAC input
16.VIDEO CABLE SET
Video output source and GND
-5-