IT-M11
SERVICE MANUAL
Ver 1.0 2000.04
SPECIFICATIONS
Digital signal Tone, 10PPS (pulse) selectable
Dimensions Approx. 115 x 70 x 20 mm (w/h/d)
(approx. 4 5/8 x 2 7/8 x 8 3/4 inches)
Mass Approx. 560g
(approx. 1 lb 7oz)
Canadian Model
Supplied Accessories
Design and specifications are subject to change without notice.
Telephone line cords (4-conductor type)
(long : 2/short : 1)
Wall bracket
Screws (4)
Directory label (1sheet)
2-LINE TELEPHONE
SECTION 1
GENERAL
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be damaged by heat.
This section is extracted from
instruction manual.
– 2 –