Loading...
Portable Air Conditioner and Heater
With Heat Pump Technology
PH3-12R-03
Operating Instructions
3046364
Model No. PH3-12R-03
© 2008 Soleus Air International
Thank you for choosing a Soleus Air Portable Air Conditioner. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air Portable Air Conditioner with Heat Pump technology.
For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, date purchased, and serial number below:
Store Name: ____________________________________________________
Location: ______________________________________________________
Date Purchased: _________________________________________________
Serial Number (located on back of unit): ______________________________
IMPORTANT INSTRUCTIONS
Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this manual in a safe place for future reference.
1)Always place the unit on a level surface.
2)Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.
3)Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or outlet grilles.
4)The unit must be connected to a correctly grounded power supply.
5)Do not start or stop the unit by inserting or pulling out the power plug.
6)Do not use an adapter plug or extension cord.
7)Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.
8)Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this manual.
9)Do not let children play near this unit.
10)Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by the manufacturer or a qualified service technician.
11)When cleaning the unit, always turn the unit off and unplug the power cord.
12)When the unit is not in use, always remove the venting kit from window.
2
PACKAGE CONTENTS
Portable Air Conditioner
Exhaust Hoses (1)
Hose Adapters (1)
Window Kit Adapter (1)
Remote Control
AAA Batteries (2)
Window Kit - 2 Sliding Panels (1 single hose panel, 2 extension panels)
Owner’s Manual
SPECIFICATIONS
•The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.
•Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.
•Power consumption is measured when the fan runs at the highest speed setting.
•These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.
•If the environment temperature is higher than the max operating temperature or lower than the minimum operating temperature, the air conditioner may not work properly.
MODEL |
|
PH3-12R-03 |
|
Cooling Capacity |
|
12,000 BTU/Hr |
|
Heating Capacity |
|
12,200 BTU/Hr |
|
Dehumidifying Capacity |
63 pts/day |
||
Power Consump- |
|
Cooling |
1400W |
tion |
|
Heating |
1150W |
Air Flow Volume |
|
240 CFM |
|
Power Source |
|
115 V / 60 HZ |
|
Rated Current |
|
Cooling |
12.2A |
|
Heating |
10A |
|
|
|
||
Sound Pressure Level |
<45 db(A) |
||
Weight |
|
70 lbs |
|
Dimensions (WxDxH) |
|
12.98” x 22.17” x 27.78” |
|
|
|
||
|
|
|
|
Refrigerant |
|
R22 |
|
DISCLAIMER
ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.
3
PRODUCT DIAGRAM (Actual product design may differ slightly from images below)
FRONT
A.Control panel
B.Vertical air louvers
C.Air outlet
D.Horizontal air louvers
E.Casters
F.Power Cord & Plug
BACK
A.Hot air outlet grill
B.Lower air inlet grill
ACCESSORIES
Flexible exhaust hose with 2 adapters
•3-piece set
•stretches from 14 1/4” to 60 5/8” (36cm to 150cm)
Adjustable window slider kit
•2-piece set
•adjusts 28” to 55”
Drain tube
Drain pan
4
INSTALLATION
SELECTING THE LOCATION
Place the unit in a flat location where the air outlets are not obstructed. Place the unit at least 20” (50cm) away from a wall or other obstacle.
MOUNTING THE EXHAUST HOSE
Slide the square end of the exhaust duct over the hot air outlet on the back of the unit.
The exhaust hose should be kept as short and straight as possible. Prevent any sharp bends in the exhaust hose, as this will trap hot exhaust air.
The hot exhaust air can be vented through the wall or out a window. If mounting in the wall, the height of the hole should be 16 to 50 inches (40cm to 130cm).
Soleus Air does not provide a venting kit for through the wall ventilation. Venting through the wall requires a custom installation.
5
Loading...